Materials Engineer Salary in State of New York, USA

JOB DESCRIPTION Operates and maintains all building systems. Responsibilities will be carried out in a manner consistent with high quality maintenance and economical operation of the building's equipment and systems. Ability to work independently most times with no on-site supervision. May be assigned to multiple properties and ownership entities. Similar mechanical skill-set as an Assistant Chief but does not oversee additional staff or perform managing duties. Must be available to respond to after hour emergency calls.RESPONSIBILITIES • Maintain and check operating logs daily on the following: air conditioning, fan units, graph charts, utility meters and general complaints.• Organize work orders to be performed by Building Engineers. Ensure that building systems and tenant service requests are handled efficiently at the most economical cost. Strive for minimal equipment downtime.• Oversee and adhere to the established preventive maintenance program.• Assist in the development of the annual budget and RFP process for budgeted projects.• Order supplies and materials via written or verbal communications when approved by Building Manager.• Maintain monthly inventory of expendable supplies and materials that are used frequently. Oversee storage and maintain records of supplies and materials received.• Maintain inventory of permanent tools and equipment annually. Ensure model and serial numbers are recorded exact description of tool and equipment.• Maintain and record meter readings.• Make weekly inspections of all engineering spaces and equipment. Make a written report to building manager for approval and posting.• Maintain organized building files.• Verify, prior to starting a job, that all tools and equipment are available before commencing work.• Submit monthly reports to Building Manager on work performed and work needed to be done.• Respond to tenant complaints and ensure all reasonable measures are taken to satisfy the tenant's needs in a timely and efficient manner.• Understand operating procedures and proper chemical treatment levels for cooling towers and boilers. Responsible for chemical treatment of machines at all times including blow down of boilers covering weekdays and weekends.• Maintain and check service contractors work schedule. Ensure time, date, repairs are made and properly recorded.• Have a complete understanding of life safety systems, and what the procedures are in the event of a fire.• May coordinate evening fire alarm tests and also test to ensure elevator capture system works properly.• Accountable for implementation of national policy.• May perform other duties as assigned.QUALIFICATIONS High School Diploma.• Minimum of 7 years previous building operations engineering experience.• Ability to handle multiple projects and make decisions.• Proficient computer and e-mail skills.• Holds necessary/required licenses.• Must have the ability to complete required safety classes that pertain to specific job duties.Salary: $35/hr - $55/hr.The hourly rate is between $35/hr and $55 per hour, and the anticipated annual base compensation range for this position will be $72,800 - $114,400 inclusive of required overtime.Note: The statements herein are intended to describe the general nature and level of work being performed by employees and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel so classified.Newmark is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation and gender identity, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law.

Job DescriptionAs part of the Thermo Fisher Scientific team, you'll discover meaningful work that makes a positive impact on a global scale. Join our colleagues in bringing our Mission to life every single day to enable our customers to make the world healthier, cleaner and safer. We provide our global teams with the resources needed to achieve individual career goals while helping to take science a step beyond by developing solutions for some of the world's toughest challenges, like protecting the environment, making sure our food is safe or helping find cures for cancer.How will you make an impact?Molding process engineers provide technical support for molding and assembly operations for current production product and for new product and process development. This role interacts with a large cross section of the Thermo Fisher Employee base inclusive of hourly line workers, equipment set up personnel, team leads, shift supervisors, quality engineers, tool room personnel, maintenance and site leadership.Key Responsibilities: Establish and optimize manufacturing processes, methods and procedures to assure product performance, quality and cost effectiveness.Troubleshoot production issues and keep production running to support customer requirements until corrective actions can be implemented. Partner with Set-up, Maintenance, Quality, Operators, and other groups as needed to accomplish this.Uses fact-based analysis to identify gaps (NCRs, systemic problems, etc.) and develop corrective and preventive actions to address. Responsible for overseeing the timely implementation of countermeasures.Identify and implement Continuous Improvement projects and/or general improvement projects, applying Lean methodologies and tools.Coordinate and direct investigations in new processes, materials and other related technologies, and provides training for the operation as needed.Support the research, evaluation and procurement of machines, tools, molds and other equipment required to meet production needs.Coordinate and complete the validation process for new molding processes, machines and equipment.Establish engineering tolerances and specifications.Provide technical assistance and expertise to manufacturing in problematic situations, implementing corrective action and providing training as required.Establish and maintain manufacturing specifications, i.e., BOM, routings, set up sheets and other related technical input and documentation.Develop optimized Decoupled molding process.Work with Tooling, Quality and Manufacturing Departments to debug and validate molds, maintaining optimized process.Interpret print for product requirements.Represent manufacturing engineering on New Product Development teams, ensuring new products that are brought to market are capable of being manufactured to accepted specifications.Work with New Product Development group to validate new products.Support NPD, such as with Process FMEA, Design FMEA, Process Flow Chart, and Control Plan / QCIPActively participates in daily Gemba walks, as well as other site meetings.Participates in Value Stream Key Performance Indicators (KPI) reviews.Prepares capital appropriation requests and is responsible for administering the approved project capital. Aids in the development and implementation of capital budget.Is responsible to manage and lead team projects as assigned.Acts as a Role Model Leader, with a positive attitude and a passion to achieve short- term and long-term goals.Learn and implement internal and external standard processes.Communicate with Marketing, Product Development, Industrial Design and Operations team members to resolve process, mold and equipment details that differ from product specifications. May coordinate and present manufacturing plans at design review meetings.Performs all job duties in a safe manner, consistent with the Code of Ethics and the 4-I Values, and follows all ISO standards, Company and site policies and guidelines, and regulatory or statutory requirements.Performs other duties and responsibilities, as needed.Minimum Requirements/Qualifications:Bachelor's degree in engineering (Mechanical, Chemical or Plastics Engineering preferred); Work experience may replace bachelor's degree.Prior manufacturing experience required. 5+ years working experience in a manufacturing environment with ISO quality standards strongly preferred.Technical depth in Blow Molding and/or Injection Molding strongly preferred. Experience with Tooling, Assembly/Test Automation and Clean Rooms a plus.Experience working closely with set-up and maintenance functions strongly preferred.SMED experience supporting mold and process requirements a plus.Ability to deliver fact- based decisions and apply a mentality for Lean Management, gaining Value Stream efficiencies and continuous improvement. Candidate should have experience in successfully driving continuous improvement.Ability to conduct critical analysis and assessments to develop action plans that ensure efficient, lean, and effective processes are in place to produce quality products.Ability to accurately and quickly assess a situation on the manufacturing floor and determine and implement corrective measures to maintain flow of production.Proficient in process auditing and Lean manufacturing techniques.Knowledgeable in advanced data collection, measuring, analysis, improvement and control.Strong ability to effectively use judgment and make decisions.Excellent prioritization, time management, and organizational skills.Excellent verbal and written communication skills.Ability to work effectively in a team environment.Ability to work effectively with people at all levels in an organization.Has working knowledge of other business functions (Quality, Supply Chain, Human Resources and Financial) in addition to Engineering and Manufacturing.Demonstrated ability to quickly learn technology systems and applications is required; proficiency in SAP and Microsoft Office Suite is preferred.Ability to travel as required, < 10% of the time.Working conditions require the ability to sit, stand, walk, bend, climb stairs, and work at a computer station and on manufacturing shop floor.Non-Negotiable Hiring Criteria: Prior manufacturing experience required.Ability to deliver fact-based decisions and apply a mentality for Lean Management.Strong ability to effectively use judgment and make decisions.Excellent prioritization, time management, and organizational skills.Ability to work effectively in a team environment.We offer competitive salary, an annual incentive bonus plan, and a range of other employee benefits!Our Mission is to enable our customers to make the world healthier, cleaner and safer. Watch as our colleagues explain 5 reasons to work with us. As one team of 100,000+ colleagues, we share a common set of values - Integrity, Intensity, Innovation and Involvement - working together to accelerate research, solve complex scientific challenges, drive technological innovation and support patients in need. #StartYourStory at Thermo Fisher Scientific, where diverse experiences, backgrounds and perspectives are valued.Apply today! http://jobs.thermofisher.comThermo Fisher Scientific is an EEO/Affirmative Action Employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability or any other legally protected status.Accessibility/Disability AccessJob Seekers with a Disability: Thermo Fisher Scientific offers accessibility service for job seekers requiring accommodations in the job application process. For example, this may include individuals requiring assistance because of hearing, vision, mobility, or cognitive impairments. If you are a job seeker with a disability, or assisting a person with a disability, and require accessibility assistance or an accommodation to apply for one of our jobs, please submit a request by telephone at 1-855-471-2255*. Please include your contact information and specific details about your required accommodation to support you during the job application process.This telephone line is reserved solely for job seekers with disabilities requiring accessibility assistance or an accommodation in the job application process. Messages left for other purposes, such as not being able to get into the career website, following up on an application, or other non-disability related technical issues will not receive a response.Compensation and BenefitsThe salary range estimated for this position based in New York is -.This position may also be eligible to receive a variable annual bonus based on company, team, and/or individual performance results in accordance with company policy. We offer a comprehensive Total Rewards package that our U.S. colleagues and their families can count on, which includes:A choice of national medical and dental plans, and a national vision plan, including health incentive programsEmployee assistance and family support programs, including commuter benefits and tuition reimbursementAt least 120 hours paid time off (PTO), 10 paid holidays annually, paid parental leave (3 weeks for bonding and 8 weeks for caregiver leave), accident and life insurance, and short- and long-term disability in accordance with company policyRetirement and savings programs, such as our competitive 401(k) U.S. retirement savings planEmployees' Stock Purchase Plan (ESPP) offers eligible colleagues the opportunity to purchase company stock at a discountFor more information on our benefits, please visit: https://jobs.thermofisher.com/global/en/total-rewards

Thornton Tomasetti applies engineering and scientific principles to solve the world's challenges. An independent organization of creative thinkers and innovative doers collaborating from offices worldwide, our mission is to bring our clients' ideas to life and, in the process, lay the groundwork for a better, more resilient future. We provide support and opportunities to our employees to achieve their full potential and cultivate a rewarding career. Our Façade Engineering practice provides consulting services to architects, building owners, and developers. Our suite of specialty analyses helps solve complex design challenges, improves constructability, maximizes energy efficiency, and increases security. We offer a range of services for the full building life cycle to help clients execute ambitious architectural visions. Our consulting services include materials research, specialty analyses, detailed design, engineering and construction support, and glass and façade failure investigations. In the technology-driven cladding industry, innovation comes with the territory. Nearly two-thirds of the facades we design and engineer are based on customized systems that involved unique combinations of materials. The Role We have an opportunity for an Engineer to join our Façade Practice. This individual will be responsible for the detailing of facades and running relevant analyses, materials, and systems research, and coordinating project work with the team. Must be conscientious and creative, detail-oriented, and professional with attentiveness to client communications. ResponsibilitiesAnalyzes façade performance with specialized software (i.e. loading, thermal analysis, condensation risk, geometry). Researches materials and systems to determine specific project suitability. Interprets building codes and project/design/construction specifications. Prepares façade detailing in 2D and 3D format for client communication. Assists in construction administration, responding to RFIs, and organizing submittal logs. Attends construction meetings, performs site inspections, and prepares field reports for clients. Interacts with team members and clients regarding project information. RequirementsBachelor's degree in Engineering or Architecture. Master's degree preferred. Must have façade experience for small-scale projects. Ability and willingness to travel within the US and internationally. CompensationThe rate for this position generally is$73,500-$84,000annually.This range is a good faith estimate provided pursuant to the New York Pay Transparency Law. It is based on what a successful New York applicant might be paid and assumes that the successful candidate will be in New York or perform the position from New York. Similar positions located outside of New York will not necessarily receive the same compensation.Actual pay rates may vary from the range, as permitted byNew YorkEqual Pay Transparency Law. Compensation offers will be based on various factors, including operational needs, individual education, qualifications and experience, work location and comparison to employee already in the role, as well as other considerations permitted by law. A potential new employee's pay history will not be used in compensation decisions. Benefits Depending on your employment status, benefits may include: Medical, Dental, Vision, Life, AD&D, Disability and other voluntary benefits Flexible Spending Accounts for Medical and Childcare Paid Time Off, Family Leave for New Parents, Volunteer Time Tuition Reimbursement Commuter Transit (where available) 401k retirement savings with Company matching on employee contributions and/or qualified student loan repayments Fitness Reimbursement And other various wellness, diversity/inclusion and employee resource programs and initiatives Thornton Tomasetti is proud to be an equal employment workplace. Individuals seeking employment at Thornton Tomasetti are considered without regards to age, ancestry, color, gender (including pregnancy, childbirth, or related medical conditions), gender identity or expression, genetic information, marital status, medical condition, mental or physical disability, national origin, protected family care or medical leave status, race, religion (including beliefs and practices or the absence thereof), sexual orientation, military or veteran status, or any other characteristic protected by federal, state, or local laws. Thornton Tomasetti Global Terms of Use and Privacy Statement Carefully read these Terms of Use before using this website. Your access to and use of this website and application for a job at Thornton Tomasetti are conditioned on your acceptance and compliance with these terms.Please access the linked document by clicking here , select the country where you are applying for employment, and review. Before submitting your application you will be asked to confirm your agreement with the terms.

EDR is seeking Level II & III Engineers to join our growing Engineering Team in our White Plains, NY office. Each position will have a primary focus on Water Resources projects, such as Water Treatment, Storage, Transmission & Distribution as well as Wastewater Collection, Pumping and Treatment in addition to other public infrastructure components.Level II and III Engineers are members of multi disciplined teams to develop studies, assessments, engineering reports and evaluations, calculations, technical design documents such as equipment and material specifications and drawings. You will be working on a variety of projects, each with its own team and unique set of problems to solve. Project locations are primarily within the Northeast region.Engineer II requirements and pay:Bachelor's degree in Civil, Water Resources, or Environmental Engineering2-4 years of professional experienceSuccessful completion of the NYS Fundamentals of Engineering examAnticipated base pay of $71,000 - $88,000Engineer III requirements and pay:Bachelor's degree in Civil, Water Resources, or Environmental EngineeringA minimum of 6 years of professional experience Successful completion of the NYS Fundamentals of Engineering examAnticipated base pay of $89,000 - $97,000Pay is commensurate with experience. EDR reserves the right to pay outside of the target range based on an individual's education, credentials, skill level and relevant experience, as well as internal pay equity, geographic location, and business needs.EDR is a multi-disciplinary consulting and design firm that has been in business for over 45 years. EDR's Engineering practice area consists of technical staff that deliver high quality deliverables to our many clients. Along with Water Resources, our engineering team includes engineers that have a focus on Structural, Civil, Automation, Electrical, HVAC and Plumbing areas of work. Come join our team, work on interesting and challenging projects, and collaborate with our talented group of professionals!Applicants must be currently authorized to work in the United States on a full-time basis. No sponsorship is available for this position.To apply for this position, please upload and submit your resume and cover letter here: https://www.edrdpc.com/careers/engineer-ii-engineer-iii/

EDR is seeking Level II & III Engineers to join our growing Engineering Team in our Syracuse, New York office. Each position will have a primary focus on Water Resources projects, such as Water Treatment, Storage, Transmission & Distribution as well as Wastewater Collection, Pumping and Treatment in addition to other public infrastructure components.Level II and III Engineers are members of multi disciplined teams to develop studies, assessments, engineering reports and evaluations, calculations, technical design documents such as equipment and material specifications and drawings. You will be working on a variety of projects, each with its own team and unique set of problems to solve. Project locations are primarily within the Northeast region.Engineer II requirements and pay:Bachelor's degree in Civil, Water Resources, or Environmental Engineering2-4 years of professional experienceSuccessful completion of the NYS Fundamentals of Engineering examAnticipated base pay of $55,000 - $68,000Engineer III requirements and pay:Bachelor's degree in Civil, Water Resources, or Environmental EngineeringA minimum of 6 years of professional experience Successful completion of the NYS Fundamentals of Engineering examAnticipated base pay of $69,000 - $75,000Pay is commensurate with experience. EDR reserves the right to pay outside of the target range based on an individual's education, credentials, skill level and relevant experience, as well as internal pay equity, geographic location, and business needs.EDR is a multi-disciplinary consulting and design firm that has been in business for over 45 years. EDR's Engineering practice area consists of technical staff that deliver high quality deliverables to our many clients. Along with Water Resources, our engineering team includes engineers that have a focus on Structural, Civil, Automation, Electrical, HVAC and Plumbing areas of work. Come join our Engineering team, work on interesting and opportunity driven projects, and team up with our talented group of professionals!Applicants must be currently authorized to work in the United States on a full-time basis. No sponsorship is available for this position.To apply for this position, please upload and submit your resume and cover letter here: https://www.edrdpc.com/careers/engineer-ii-engineer-iii-2/

Job Title Building Engineer Job Description Summary This position supports the Assistant and/or Chief Engineer and Sr. Facilities Manager in the day-to-day maintenance, repair, and efficient operation of all building systems and equipment on behalf of the client. The Engineer will accurately and perform timely routine operation, inspection, maintenance, and repairs all HVAC, mechanical, electrical, and plumbing equipment, and systems in assigned facilities to obtain the most efficient operating results and life expectancy. Can include HVAC, boiler, heating, refrigeration, water, and energy systems to ensure the effective operation of the client facility.Position assures that equipment is being maintained in an energy-efficient and safe manner, and downtime is reduced to a minimum by anticipation of necessary repairs and maintaining records of past operating experiences. Performs inspections and repairs to assigned property interior and exterior areas, including walls and flooring, installed fixtures, roofing systems, lighting, etc. The Engineer will perform at the highest of ethical standards, reflecting the core values of C&W as defined in its Business Code of Conduct, Policies and Procedures Manual, and other related company policies.This is a non-supervisory/ hourly role. Job Description ESSENTIAL FUNCTIONS AND RESPONSIBILITIES Responsibilities • Ensure ongoing preventive maintenance and repair work orders on facility mechanical, electrical, lighting, and other installed systems, equipment, and other components.• Maintain, operate, and repair all HVAC systems and associated equipment, electrical distribution equipment, plumbing systems, building interior/exterior repair, and related grounds as it pertains to assigned client buildings.• Performs major HVAC repairs including compressor replacement, condenser replacement, evaporator coil replacement, condenser coil replacement, etc.• Performs major plumbing replacements including domestic water piping, steam trap repairs, sewage line repairs, bathroom fixture repairs, etc.• Perform electrical repairs including running and bending conduit piping, pulling cables, performing electrical panel maintenance, electric motor maintenance, and predictive maintenance using a megar on said motors and compressors.• Perform assigned facility inspections and due diligence efforts, reporting on as-found conditions impacting satisfactory client occupancy and operations.• Respond effectively to all emergencies. May require light travel during emergency events.• Operation, maintenance, and repair of all boilers, heaters, pumps, valves, and lines used in the distribution of steam and heated or processed water.• Operation, maintenance, and repair of refrigerant compressors, condensers, evaporators, traps, transfer pumps, expansion valves, stop valves, and float valves, together with all refrigerant lines and devices used to control temperature, and air conditioning systems in their entirety.• Operation, maintenance, and repair of pumps handling water or other secondary refrigerating liquids together with all valves, appurtenances, and lines used in the system.• Operation, maintenance, and repair of air compressors, together with distribution lines and all valves and devices for air control.• Operation, maintenance, and repair of water filters, softeners, piping, and pumps used in conjunction with water distribution, including all sinks and toilet bowls, including all supply lines, drains, water lines, control devices, and sprinkler systems.• Operation, maintenance, and repair of all types of electrical motors and engines used to power pumps, compressors, and fans.• Maintenance of elevators except where this type of equipment is serviced and maintained by specialized contractors.• Operation, maintenance, and repair of building automation systems for HVAC, including consoles, data gathering panels, remote sensors, and indicating devices.• Operation, maintenance, and repair of sanitary sewer systems, and sump pumps including basins, water closets, urinals, and piping.• Maintenance and repair of trash compactors, including electrical and hydraulic systems.• Maintenance and repair of all kitchen equipment excluding tenant-owned equipment.• Maintain stock and inventory control.• Recommend improvements to the preventive maintenance program on an ongoing basis. • Ensure the management team is informed of current building operations by compiling and submitting monthly reports. • Study and become familiar with the various items of equipment for assigned client locations, and the methods required to use them properly to ensure required ongoing daily client activities. To include building automation systems, fire/life safety systems, and any other building-related equipment as needed. • Recommend improvements to the preventive maintenance program on an ongoing basis. • Recognize danger and safety hazards and propose methods to eliminate them or use the correct PPE in performing the task needed.• Comply with all applicable codes, regulations, governmental agencies, and company directives related to building operations and practicing safe work habits. • Respond effectively to all emergencies. May require light travel during emergency events. • Must maintain all Federal, State, or Local licenses required for locations assigned. • Complete all required C&W Safety Training as scheduled annually. • Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance during all working hours.• General Maintenance may include but is not limited to:a) Repairs on toilet facilities including soap dispensers.b) Repairs on registers and radiators.c) Replacement of lamps and cleaning of light fixtures.d) Removing ceiling tile.e) Minor repairs on furniture and floors.f) Maintaining and/or replacing door hardware.g) Repair of floor maintenance equipment and Venetian blinds.h) Maintenance painting in equipment rooms, cooling towers, and other building facilities.i) Assist in the replacement of filters in the HVAC equipment.j) General cleaning in mechanical spaces and perimeter inductions unitsk) Cleanup of equipment in the engine room and shopl) Miscellaneous handyman work requires the limited use of hand tools.m) Replace fire extinguishers when needed • Must maintain all Federal, State, or Local licenses required for locations assigned. • Other assigned operational tasks may be typically expected of the Building Engineer role.KEY COMPETENCIES• Communication Proficiency (oral and written) • Organization Skills • Technical Proficiency • Problem Solving/Analysis• Sense of Urgency6. Related requirementsAny combination of education and experience that would provide the required knowledge and abilities is qualifying. A typical way to obtain knowledge and abilities would be:EducationA High School Diploma or GED Equivalent is required. Graduate of an apprentice program or trade school preferred is preferred.Years of Relevant ExperienceMinimum of four (4) years of technical experience in all aspects of building engineering with a strong background in technical aspects of HVAC equipment and systems, plumbing, electrical, equipment repair and maintenance, and overall system design and application as referenced above.Licenses or Certifications • Candidate must possess and maintain a valid state driver's license.• Based on location appropriate license/permit for trade as may be required, i.e., Journeyman or Master Electrician License, City License, Operators License, Steam Engineers License, etc.• Possess a valid "Universal" level certification for CFC and HFC-based refrigerants (EPA Section 608); to service, repair, or dispose of equipment that could releaseKnowledge, Skills & Abilities • Experience in operation, maintenance, and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, gas lines, water systems, and the like.• Knowledgeable in energy management systems, techniques, and operations.• Thorough knowledge of all building systems operations, maintenance, and repair.• Excellent interpersonal skills in dealing with tenants, clients, and vendors.• Basic Computing Skills in Outlook, Excel & Word, including proficiency in the operation of smartphone and/or iPad/tablet, uploading .pdf files, and documents, and logging into conference meetings (e.g., BlueJeans, Teams Meetings, Zoom).Physical Work Requirements The conditions herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential job functions: Environment: This job operates in a professional office or commercial building environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets, and fax machines. Work could any combination of:• Almost constant exposure to loud noise includes the use of power equipment and unusual elements, such as extreme temperatures, toxic chemicals, biohazardous materials, dirt, dust, fumes, smoke, and/or loud noises.• Ability to perform work wearing Personal Protective Equipment (PPE) if required• May require regular travel outside between properties in varying weather conditions.Physical: Considerable physical activity. Ability to stoop, stand, climb, frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders), and safely install rigging/lifting devices. Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine. May involve movement between departments, floors, and properties to facilitate work. Should maintain the ability to speak clearly so others can understand you as week as the ability to read and understand the information presented orally and in writing.Vision: See in the normal visual range with or without correction; vision sufficient to read computer screens and printed documents. Regularly required to utilize vision abilities, allowing reading of printed material, drawings, and schematics.Hearing: Hear in the normal audio range with or without correction.Scheduling Most schedules work typical business hours based on location assigned.Based on client need, the role could be scheduled as the only maintenance staff member on duty during certain shifts; may be required to work extended periods of time without relief when responding to priority/emergency situations (including overtime type assignments); may require shift work and/or on-call duties and over time.Must be willing and able to support after-hours/weekends building-related activity as required. The role may be assigned and must be able to respond to client callbacks for regular repair and/or emergencies events.Based on location assigned, schedules could be assigned as first, second or third shift schedules assigned.Other Duties This job description is not designed to cover or contain a comprehensive list of activities, duties, or responsibilities that are required of the employee. Other duties, responsibilities, and activities may change or be assigned at any time with or without notice.Conditions of employment All offers of employment are contingent upon:Legal Documentation establishing identity and eligibility to be legally employed in the US/United States CitizenshipDrug TestingCriminal background checkClean DMV record (for related driving roles)Education verificationReference checksAAP/EEO STATEMENT C&W provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Further, the company takes affirmative action to ensure that applicants are employed and employees during employment are treated without regard to any of these characteristics. Discrimination of any type will not be tolerated.Cushman & Wakefield also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health, vision, and dental insurance, flexible spending accounts, health savings accounts, retirement savings plans, life, and disability insurance programs, and paid and unpaid time away from work. In addition to a comprehensive benefits package, Cushman and Wakefield provide eligible employees with competitive pay, which may vary depending on eligibility factors such as geographic location, date of hire, total hours worked, job type, business line, and applicability of collective bargaining agreements.The compensation that will be offered to the successful candidate will depend on factors such as whether the position is covered by a collective bargaining agreement, the geographic area in which the work will be performed, market pay rates in that area, and the candidate's experience and qualifications.The company will not pay less than minimum wage for this role.Cushman & Wakefield provides equal employment opportunity. Discrimination of any type will not be tolerated. Cushman & Wakefield is an Equal Opportunity / Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or any other characteristic protected by state, federal, or local law.In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or email [email protected] . Please refer to the job title and job location when you contact us.

Job Preview GPI offers excellent benefits, including a 401(k) plan, ESOP, medical/dental/vision plans, paid time off, and more. GPI is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, disability, or protected veteran status. M/F/D/VNotice To Third-Party AgenciesGPI does not accept unsolicited resumes from recruiters and/or agencies. Any staffing/employment agency, person, or entity that submits an unsolicited resume to this site does so with the understanding that the applicant's resume will become the property of GPI and has the right to hire that applicant at its discretion and without any fee owed to the submitting staffing/employment agency, person or entity.GPI will not pay a placement fee unless the agency or recruiter has a signed contract with GPI's Corporate Human Resources department in advance of submitting a candidate for consideration. Staffing/employment agencies must submit applicants to the designated GPI recruiter to be eligible for a placement fee. Verbal and written approvals will not be considered a valid contract for service.Work AuthorizationIn compliance with the Immigration Reform and Control Act of 1986, we will hire only U.S. citizens and aliens lawfully authorized to work in the United States (if the position is or will be one that is subject to U.S. law). Verification of employment eligibility will be required at the time of hire. Visa sponsorship is typically not available for entry-level positions. GPI participates in E-Verify. Know your Right to Work.Job Description Are you passionate about the rehabilitation of infrastructure locally? Is career growth and development what you want? Do you like working on a variety of projects? Do you value a company that puts employee satisfaction and diversity at the forefront of who they are? If so,GPIwants you!GPI seeks a motivated Resident Engineer/Office Engineer with varying years of experience working on bridges, roads, canals, utilities, and multi-use trail projects to join our team in the Rochester, NY office. Ideally, we are seeking someone with a strong work ethic, a desire to learn, the willingness to work collectively with our team and teaming partners, and the ability to work on concurrent projects.GPI's success has been built around its number one corporate strategic objective of employee satisfaction. This is evident by the longevity of our employee retention and the family culture which is felt within our organization. As an employee-owned company, we work together as a team with a common goal to succeed.What You'll Be Doing:Performing daily inspection of construction activities.Communicating with clients, contractors, designers and other project stakeholders.Measuring and tracking of pay quantities.Completing daily inspection reports, contract change orders, and contractor pay estimates.Making determinations on extra work and pricing.Chairing biweekly project progress meetings.Overseeing materials testing in the field.Developing record plans.Daily reviewing of Maintenance and Protection of Traffic.Recommending approval of completed work.Maintaining organized project construction and material records.Properly maintaining Force Account documentation.Supervising other inspectors doing the above work to meet the needs of the project and client.What You Bring to the Table:Current NICET Level III or IV certification or equivalent experience.5+ years of experience with construction inspection and daily report writing preferred.Experience with NYSDOT standard specifications, standard contract provisions, and MURK documentation.Proficiency with Microsoft Word, Excel, and Teams.OSHA 10-hour training.Experience with Infotech Appia and DocExpress is a plus.Strong communication skills.Requirements MINIMUM REQUIREMENTS:Maintain a valid driver's license with a clean motor vehicle report (MVR) for final considerationPossess a personal vehicle for use on or around a job siteRead, write, and understand plans and directions given in the English languageBasic computer skills with the ability to create and edit Microsoft Word and Excel documents, create Outlook emails and utilize SharePoint and Microsoft Teams to communicate with other team membersAble to stand for approximately 3 hours minimum a day up to 8 hoursAble to traverse a construction job site consisting of uneven ground varying in height and consistency of material, with a variation of elevation 19" or less (mud, gravel, rutted ground, etc.)Able to wear GPI required PPE, i.e., hard hats, safety vest, work boots, and/or safety glasses/goggles while workingAble to move equipment or inspection specimens weighing up to 50 pounds

Quality Engineer / ManagerRochester, NYJK Executive Strategies has partnered with a local manufacturer in its search for a Quality Engineer / Manager. Our client is an industry leader specializing in rolling stock sub-systems and offers a variety of technological solutions for the railway industry with a worldwide presence. Reporting to the Chief Operating Officer, the Quality Engineer / Manager develops, implements, and periodically evaluates a program to ensure the organization's production operations, from raw materials to finished products, meet the quality, integrity, and efficiency standards set by the organization. Oversees evaluations, tracking, trending, and monitoring of quality activities. Requires an individual who works independently and in a team environment.Responsibilities:Evaluates production operations from a strategic level to ensure that products meet quality, integrity, functionality, and other specifications and requirements.Responsible for supplier quality metrics, supplier process capability audits, and being able to perform offsite inspection of materials at supplier locations.Responsible for monthly and quarterly supplier performance metrics.Review incoming raw material certifications.Inventory management of non-conforming materials.Develop and monitor performance metrics for key organizational processes and create measurement displays and diagrams.Coordinate, prepare, and conduct assessments of various program entities for compliance with contract requirements and provide documented feedback to those assessed.Assist in the development of compliance processes, quality procedures, and quality control methodologies.Prepare quality documentation, detailed reports, and presentation materials.Perform source inspections including process, final, first article inspections, and first article approval.Work with customers resolving corrective action (CAPA)Develop and review documents to ensure consistency and compliance with contracts, agreements, and management policies.Identify deviations and non-conformances from established standards and provide recommendations for resolution.Identify opportunities for continuous improvement and assist in implementing solutions using methodologies such as process mapping, brainstorming, and data analysis.APQP activities with the process flow PFMEA.Responsible for calibration matrix.Create, populate, and maintain databases for tracking data, requirements, and activities.Manages all internal and external audits, including ISO 9001.Maintain ISO quality system and drive initiatives for ISO compliance.Qualifications:4+ years of experience in a quality engineer or leadership role.Bachelor's degree preferred, in either Quality, Manufacturing, Engineering or another relevant field.Proficiency in MS Office and database management skillsAbility to read blueprints and Catia files.Understanding of SAP functionalitiesSolid understanding and experience in problem-solving and process improvements through Six Sigma, Lean, and ISO frameworks.Strong problem-solving, workload management, and organizational skills with limited supervision.Ability to work well within a highly energized work environment with changing priorities and tasks.Detail-oriented and comfortable working in a challenging environment.Must have strong communication skills, organization, and follow-up skills.Experience participating in and leading process improvement projects.Dedicated to completing projects in a timely manner.Salary Range: $75K - $85KJK Executive Strategies is an Equal Opportunity Employer. It is the policy of JK Executive Strategies to provide equal opportunity in employment and conditions of employment to all individuals regardless of age, race, color, religious beliefs, national origin, sexual orientation, gender identity, sex, veteran or military status, disability, pregnancy-related condition, predisposing genetic characteristics, genetic information, marital status, familial status, prior arrest, domestic violence victim status, non-job related convictions, participation in lawful activities outside of our workplace, or any other status protected by law.

JOB - Estimation Engineer (Stone Masonry and Tile Projects).LOCATION - Brooklyn, NYTERM - PermanentSALARY- $75,000 - $95,000 per annum (dependent on experience)My client - a stone and tile contractor working predominantly in the Residential and Commercial sectors are on the lookout for an experienced estimator to join the team and work on the delivery of estimations and proposals / project bids for new and existing clients.The ideal candidate will have experience in understanding scope of work and preparing estimations for upcoming project work.Those with experience in full project lifecycle work across Residential and Commercial highrise projects will be of particular interest.The Estimator will ideally have the following attributes:BS in Civil / Construction Engineering or similar.3+ years' experience in construction estimation and project engineering.Full proficiency in reading and understanding Architectural drawings to understand scope of project.Strong experience in delivery of estimations based on material, labor, equipment and overhead costs for projects in NYC.Have excellent communication skills (both verbal and written)The Estimator's role will involve:Reviewing construction documents (Drawings, Specifications) in order to understand scope of work to bid.Obtaining prices for materials and sub-contractor bids where necessary.Preparing cost analysis.Supporting Project Engineering teams.Liaising with colleagues on other engineering tasks and projects as requiredFor more information about this Estimator role please apply, or email Jack Smillie on [email protected] who will be able to provide more details on the opportunity.Many thanks, Premier Group

Purpose of the position:The Manufacturing Engineer is responsible for enhancing manufacturing processes, equipment, and materials. Collaborating closely with the product development team, this role ensures quality (according to AS9100D standards), manufacturability, and cost-effectiveness of Kistler products using lean six sigma methodologies. The focus for this position lies on supporting machine shop and assembly personnel that manufacture our product lines of transducers.Main Tasks:Collaborate with R&D to optimize new and existing designs and processes for manufacture.Design and implement necessary tools, fixtures, or equipment for production.Develop lean cell layouts and workflows.Participate in drawing reviews and FMEAs.Maintain established products and corresponding infrastructure by ensuring accurate ERP data and production documentation (BOMs, routings, procedures, etc.).Troubleshoot technical challenges in assembly or machine shop, identifying root causes, implementing solutions, and monitoring effectiveness.Identify improvement opportunities through lean manufacturing principles, including process automation.Support machine shop for capital investments and tool selection.Provide management with productivity metrics (e.g., throughput time, yields).Provide documentation and training on assembly methods, test procedures, and production equipment to assembly technicians.Ensure accuracy of bill of materials, routings, work instructions, and test procedures.Requirements profile:Bachelor's Degree from a four-year technical or engineering college or university.3+ years' experience working in a manufacturing environment.Ability to interpret engineering drawings, schematics, and technical documents.Practical mechanical and basic electronics knowledge with hands on work experience required.Strong communication skills for interaction across all organizational levels.Ability to work effectively in team settings and handle criticism and conflict constructively.Self-driven with the capability to work independently and take ownership of daily tasks and projects.Proficiency in problem-solving and analyzing a variety of situations.Experience with Microsoft Office, Project management software (Clarity), CAD software (SolidWorks), and MRP/ERP (SAP) systems.Kistler is the global leader in dynamic measurement technology for measuring pressure, force, torque and acceleration. Cutting-edge technologies provide the basis for Kistler's modular solutions. Customers in industry and science benefit from Kistler's experience as a development partner, enabling them to optimize their products and processes so as to secure a sustainable competitive edge. The owner-managed Swiss company's unique sensor technology plays a key role in the evolution of automobile development and industrial automation. Kistler is making an important contribution to the further development electrified drive technology, automated and connected driving, emission reduction and smart factories.At Kistler your experience and expertise are valued and promoted. As a global company with numerous locations worldwide, we offer exciting career opportunities in an international environment. Kistler is pleased to offer a generous benefit package with medical, dental, vision, life and disability coverage along with a 401k plan with a 4% company match, and generous personal and vacation time allowances. Kistler Instrument Corporation is an Equal Opportunity Employer.