Storage Engineer Salary in Tennessee, USA

DescriptionDomtar is a leading provider of a wide variety of fiber-based products including communication, specialty and packaging papers, market pulp and airlaid nonwovens. With approximately 6,300 employees serving more than 50 countries around the world, Domtar is driven by a commitment to turn sustainable wood fiber into useful products that people rely on every day. Domtar's principal executive office is in Fort Mill, South Carolina and Domtar is part of the Paper Excellence group of companies. To learn more, visit www.domtar.com.Domtar is seeking an Environmental Engineer at their Packaging Mill in Kingsport, Tennessee. The Environmental Engineer reports to the Environmental Manager. Key responsibilities include, but are not limited to, compiling and submitting monitoring reports; reporting environmental incidents and excursions; assisting with the development of the Environmental Management System (EMS) and serving as a resource to all departments within the Kingsport Mill Operations.GENERAL PERFORMANCE• Serves as a resource to Kingsport Mill Operations and Maintenance Departments to ensure thatsystems and processes are established that result in meeting or exceeding the environmentalregulations and Domtar performance standards and expectations.• Leads, facilitates and/or participates in the investigation of all environmental incidents and creation andimplentation of necessary corrective measures.• Conducts tasks within and serves as subject matter expert for the structured EMS system.• Develops environmental standard operating procedures and reviews operational and maintenanceprocedures to ensure that environmental considerations are incorporated when and where applicable.• Identifies trends in recurring environmental incidents and facilitates teams to address. Leverages bestpractices set forth across the Domtar mill footprint.• Stays current on environmental regulations, policies, and programs.• Ensures that document control procedures are established and followed for the identification, storage,retrieval, and disposition of environmental records.• Participates in corporate sponsored environmental audits upon request.SAFETY AND ENVIRONMENTAL• Maintains certification in EPA Method 9 visual opacity measurement.• Ensures that accurate and complete reports to Environmental Regulatory Agencies are submitted in atimely mannersuch as Discharge Monitoring Reports (DMRs), Toxic Release Inventory Reports, WaterWithdrawal Reports, Tier 2 Reports, Boiler MACT Reports, Title V Reports and Hazardous WasteReports.• Makes scheduled rounds to verify environmental standards and expectations are being met.• Responds promptly to critical eventsto prevent and mitigate emission/release impacts.• Establishes and maintains effective procedures to meet housekeeping standards at all monitoring andtesting locations.• Reviews new chemicals used on-site to minimize hazardous waste generation and exposure tohazardous chemicals.• Lead assigned regulatory program areas. Program areas could include, but not limited to NPDES,Refrigerant Compliance, Solid Waste, Title V, Stormwater.TRAINING• Leads and/or participates in new employee orientation as an instructor on environmental commitmentand compliance.• Follows priorities and deadlines as set by legislation, regulation, and company requirements.• Plans and conducts annual and periodic training for Mill employees.PRODUCTION SUPPORT • Provide on-call environmental services for off-hours and weekends. • Ensures timely and accurate data is generated to support compliance status. • Works with the Operations and Maintenance Departments in developing standard operating procedures that includes the appropriate material for ensuring environmental monitoring and control of the operation. This may include operating checklists and operating parameters. • Develops standard operating procedures for abnormal operating conditions including start-up, shutdown, and malfunction conditions; incidents, accidents, and potential emergency situations; past activities, current activities, and planned activities.QUALITY • Audits in-house and contract lab environmental testing and analyses. • Uses monitoring information to identify opportunities to improve environmental performance levels or reduce variability. • Reviews and investigates complaints made on behalf of community residents, city officials, etc.Required Qualifications/Professional Experiences Years of Experience/Education/Certifications• Five (5) years of direct experience in environmental engineering/management. • Experience in environmental permitting. • Experience in regulatory agency interface. • Knowledge of Water and Air programs. • Versatile in Microsoft Office. • B.S. in an Environmental Engineering field, Environmental Sciences, Chemical Engineering or other relevant fieldDomtar is an equal opportunity employer. Qualified applicants will be considered without regard to age, race, color, sex (including gender identity or expression, sexual orientation, and pregnancy), marital status, religion, national origin, genetic information, disability, or veteran status.

Job Req ID: 24323About Supermicro:Supermicro is a Top Tier provider of advanced server, storage, and networking solutions for Data Center, Cloud Computing, Enterprise IT, Hadoop/ Big Data, Hyperscale, HPC and IoT/Embedded customers worldwide. We are the #5 fastest growing company among the Silicon Valley Top 50 technology firms. Our unprecedented global expansion has provided us with the opportunity to offer a large number of new positions to the technology community. We seek talented, passionate, and committed engineers, technologists, and business leaders to join us.Job Summary:Supermicro is seeking a Service Engineer who will be responsible for fieldwork at customer sites to resolve and repair server systems. The Service Engineer is a critical part of post-sales support and needs to demonstrate exceptional technical aptitude in working with server products in addition to excellent interpersonal skills. It requires the ability to Support our Global Service network and help build a world-class field service organization. As a Service Engineer, you will work remotely on our Global Services Team in Memphis, TN, providing technical support for the Memphis, TN geographic location. You will be required to be at customer sites on a regular basis as needed. Qualifications:• Bachelor's degree in Computer Science, Computer Engineering, Electrical Engineering, or equivalent work experience preferred • Minimum of 3 years experience in field support servicing complex X86 systems and parts preferred • Will consider an associate degree in electrical technology, electronics, or equivalent military experience • Work experience in large enterprises or certification in Windows and Linux environments is a plus • Emphasize break/fix experience and on-site customer service experience • Hands-on experience with servers (Supermicro, EMC, DELL, HP) • Solid hardware system diagnostics skills, as well as a good understanding of how BIOS, drivers, and application loads can cause system issues • Strong technical communication skills to lead investigations with engineers of multiple disciplines • Strong written and verbal communication skills, project management skills, and solid time management skills • Be able to participate in multiple cross-functional projects concurrently in a rapidly changing environment, within established timelines and have a demonstrated ability to learn and embrace new and changing technologies • Ability to work in a challenging, dynamic, and fast-paced environment with the ability to identify and escalate issues promptly, and be proactive in driving solutions • Full professional proficiency in English (read/write/speak) • Familiarity with Linux is a plus Please note that this position requires regular in-office attendance. The successful candidate is expected to be present in the office during standard working hours as determined by the company. In-office collaboration and participation in team meetings, training sessions, and other on-site activities are essential aspects of this role. Candidates should consider the commuting distance and be prepared to fulfill their responsibilities in the designated office location. Essential Duties and Responsibilities:Includes the following essential duties and responsibilities (other duties may also be assigned): • On-site and remote troubleshooting and resolving complex technical problems on Supermicro equipment in an enterprise environment • Drive customer satisfaction through service excellence by leading preventive maintenance actions, managing repair/parts cycle times • Ensure escalation situations are managed and corrected quickly and professionally • Provide 2nd line support to the reseller/distributors in all aspects of customer support • Have a very high level of enterprise solution product knowledge • Work with Technical Account Manager, Service Manager, and Product Manager to define service programs • Provide and contribute information such as fault triage and training materials • Run tests and simulations at our facility to assist with problem-solving • Travel to the field to train and or resolve customer issues • Train new service engineers • Able to work under the Technical Account Manager's direction and take ownership of customer base • Demonstrate the ability to be self-sufficient in the field • Able to defuse challenging situations • Manage time effectively; prioritize and make good business judgments and decisions in relationship to efficiency, and effectiveness while meeting daily service expectations • Determines requirements and/or root cause of technical issues by working with customers • Resolves problems by clarifying issues; researching and exploring answers and alternative solutions; implementing solutions; escalating unresolved problems • Ability to produce meaningful reports and metrics is a plus • Ability to work flexible hours and/or flexible shifts including weekends and holidays if needed • Travel is required (up to 25%) Salary Range$70,000 - $100,000**The salary offered will depend on several factors, including your location, level, education, training, specific skills, years of experience, and comparison to other employees already in this role. In addition to a comprehensive benefits package, candidates may be eligible for other forms of compensation, such as participation in bonus and equity award programs.EEO StatementSupermicro is an Equal Opportunity Employer and embraces diversity in our employee population. It is the policy of Supermicro to provide equal opportunity to all qualified applicants and employees without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status or special disabled veteran, marital status, pregnancy, genetic information, or any other legally protected status.

Our carefully selected team is what sets us apart from other firms. We are driven to provide the best environment for our employees - latest technology, thorough training, easy access to leadership, and a comprehensive benefit package that is sure to impress. We empower our employees to strike a total life balance by offering flexible schedules and hybrid work arrangements. Clients and partners regard us as innovators who are always pushing for creative and comprehensive solutions that optimize the bottom line, and a passion for genuine client service. We are seeking a Senior Mechanical/Process Engineer with expertise and experience in consulting for a wide variety of manufacturing clients and industrial sectors. The candidate will provide technical expertise on behalf of the firm related to mechanical/process engineering of industrial and manufacturing facilities and shall be able to demonstrate the ability to lead clients through the feasibility, programming and planning stages of projects, continuing through the development of process flow diagrams and final engineering design. This position requires familiarity with the system design and hook-up of equipment similar to that associated with scrubbers, dust collection systems, chemical tank farms, compressed gasses, industrial heat exchangers, large pumping systems, cooling towers, hot oil boilers, large compressed air plants, and other similar systems. Responsibilities: Conceptualize the initial mechanical design approach for major phases of large industrial projects through installation, with an emphasis on specifying equipment, calculating loads, ductwork and pipe sizing, selection of equipment such as pumps, boilers, chillers, cooling towers, heat exchangers, dust collectors, and air washer units. Prepare engineering reports, plans and specifications for industrial projects. Design and produce engineering drawings and instructions based on calculations. Interpret and revise engineering drawings. Conceive, plan, and conduct research in complex problem areas. Prepare plans and technical specifications, contract documents and estimates. Participate in contract bidding and administration. Supervise and observe the design/installation and ongoing progress of a project, including the coordination of the project with City, State and County officials and other outside agencies. Lead the coordination of projects with clients, contractors, outside consultants and firm staff. Communicate and interact with project team members, client representatives, review agencies and others as appropriate to project. Lead in conceiving, planning and conducting research to resolve a variety of complex problems (e.g., conflicting design requirements, unsuitability of conventional materials, difficult coordination requirements). Must have a good understanding of codes and standards applicable to industrial design including but not limited to: ASHRAE, ASME, NFPA, and the IBC code set. Check and approve shop drawings. Able to devise innovative solutions to unusual engineering problems. Have excellent verbal and written communication skills. Proficient at the interpretation and creation of PFDs, P&IDs, and UFDs (Utility Flow Diagrams). Minimum Qualifications:Bachelor's degree in Mechanical, Industrial, or Chemical Engineering. Minimum of 12 years in mechanical/process design and engineering with a consulting firm for Industrial/Manufacturing/Process facility projects including but not limited to the following industries: food and beverage, battery manufacturing, energy storage, automotive, metals, etc. Professional Engineer licensure (P.E.) is required. Ability to multi-task and manage multiple projects simultaneously. Strong team player with great communication and presentation skills. Ability to travel if needed to client meetings and project sites. Valid Driver's License to travel to job sites. Gresham Smith is committed to a diverse and inclusive workplace. Gresham Smith provides equal employment opportunities to applicants and employees and does not discriminate on the basis of age, race, color, ancestry, religion, sex, sexual orientation, gender identity or expression, transgender, national origin, status as a protected veteran, disability or any other classification protected by law. Gresham Smith will not accept unsolicited resumes from recruiters, headhunters, contract recruiters, search firms, or employment agencies. An executed GRESHAM PLACEMENT SERVICES AGREEMENT (PSA) is required prior to any payment obligation for either a referral or recruiter fee. In the event a recruiter or agency submits a resume or candidate without a previously executed PSA, GRESHAM SMITH explicitly reserves the right to recruit and hire those candidate(s) at its discretion, and without any financial obligation whatsoever to the recruiter or agency. Any such unsolicited resume or candidate contact information, including those submitted directly to GRESHAM SMITH'S hiring managers or any other employee, shall become the property of GRESHAM SMITH upon receipt.

Logistics at full potential. At GXO, we're constantly looking for talented individuals at all levels who can deliver the caliber of service our company requires. You know that a positive work environment creates happy employees, which boosts productivity and dedication. On our team, you'll have the support to excel at work and the resources to build a career you can be proud of.As the Industrial Engineer II, Warehouse Design, you will be responsible for leading the development of a design package that may include material flow diagrams, facility layouts, material handling equipment designs, automation designs, storage media designs, process designs, and slotting and pick path analyses. Pay, benefits and more.We are eager to attract the best, so we offer competitive compensation and a generous benefits package, including full health insurance (medical, dental and vision), 401(k), life insurance, disability and more.What you'll do on a typical day:Collaborates with Data Analytics team to analyze client data to determine order profiles, storage media application, product slotting, velocity, SKU affinities, ABC analysisPrepares engineering calculations and documents to describe solution and detailed operating concepts such as storage and shipping capacity, facility sizing, zoning, slotting, waving, etc. and facilitates reviews with key work stream leads including engineering peers, WMS Implementation, and operationsDesigns the overall facility layout, storage media, and flow paired with the appropriate equipment supporting the Concept of Operations.Supports the business development process by supporting the solutions team's response to RFPs including developing materials and presenting to potential clientsLeads detailed engineering process on new business awards to take the design from conceptualization to full detailed design ready for implementation by performing data analyses, developing material handling specifications, working with vendors to obtain quotes, and generating a detailed, engineered AutoCAD layout with fitment into the selected facilityJoint Planning Sessions with client and conducts gap analysis to ensure issues are resolved; identifies changes to the scope when they occur and provides necessary documentation and escalationParticipates on a team responsible for the implementation of new business by preparing WMS configuration documentation that includes all needed locations, slotting, zoning, sequences for put-away and picking, and allocation rules for the facility. Supports the identification and design of new WMS and interface requirements needing development.Manages material handling and automation vendors through schedule, permitting, installation, commissioning, punch lists, etc. and validates all equipment installation, including necessary performance testing What you need to succeed at GXO:At a minimum, you'll need:Bachelor's degree in Engineering or a related field, or equivalent related work or military experience 2 years of engineering experience in supply chain management, logistics, warehousing or a related fieldExperience with Microsoft Office Experience in an AS9100 or ISO9001 production environmentIt'd be great if you also have:7 years of experience as an Industrial Engineer Extensive AutoCAD experienceAbility to travel up to 50%Time study measurement, such as MOST, a plusThird-Party Logistics (3PL) experience warehousing, distribution center or fulfillment experienceAnalyticalProject and resource management experienceWe engineer faster, smarter, leaner supply chains. GXO is a leading provider of cutting-edge supply chain solutions to the most successful companies in the world. We help our customers manage their goods most efficiently using our technology and services. Our greatest strength is our global team - energetic, innovative people of all experience levels and talents who make GXO a great place to work.We are proud to be an Equal Opportunity/Affirmative Action employer. Qualified applicants will receive consideration for employment without regard to race, sex, disability, veteran or other protected status.GXO adheres to CDC, OSHA and state and local requirements regarding COVID safety. All employees and visitors are expected to comply with GXO policies which are in place to safeguard our employees and customers.All applicants who receive a conditional offer of employment may be required to take and pass a pre-employment drug test.The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. All employees may be required to perform duties outside of their normal responsibilities from time to time, as needed. Review GXO's candidate privacy statement here.

Job Req ID: 24324About Supermicro:Supermicro is a Top Tier provider of advanced server, storage, and networking solutions for Data Center, Cloud Computing, Enterprise IT, Hadoop/ Big Data, Hyperscale, HPC and IoT/Embedded customers worldwide. We are the #5 fastest growing company among the Silicon Valley Top 50 technology firms. Our unprecedented global expansion has provided us with the opportunity to offer a large number of new positions to the technology community. We seek talented, passionate, and committed engineers, technologists, and business leaders to join us.Job Summary:Supermicro is seeking a Service Engineer who will be responsible for fieldwork at customer sites to resolve and repair server systems. The Service Engineer is a critical part of post-sales support and needs to demonstrate exceptional technical aptitude in working with server products in addition to excellent interpersonal skills. It requires the ability to Support our Global Service network and help build a world-class field service organization.As a Service Engineer, you will work remotely on our Global Services Team in Memphis, TN, providing technical support for the Memphis, TN geographic location. You will be required to be at customer sites on a regular basis as needed.Essential Duties and Responsibilities:Includes the following essential duties and responsibilities (other duties may also be assigned): • On-site and remote troubleshooting and resolving complex technical problems on Supermicro equipment in an enterprise environment • Drive customer satisfaction through service excellence by leading preventive maintenance actions, managing repair/parts cycle times • Ensure escalation situations are managed and corrected quickly and professionally • Provide 2nd line support to the reseller/distributors in all aspects of customer support • Have a very high level of enterprise solution product knowledge • Work with Technical Account Manager, Service Manager, and Product Manager to define service programs • Provide and contribute information such as fault triage and training materials • Run tests and simulations at our facility to assist with problem-solving • Travel to the field to train and or resolve customer issues • Train new service engineers • Able to work under the Technical Account Manager's direction and take ownership of customer base • Demonstrate the ability to be self-sufficient in the field • Able to defuse challenging situations • Manage time effectively; prioritize and make good business judgments and decisions in relationship to efficiency, and effectiveness while meeting daily service expectations • Determines requirements and/or root cause of technical issues by working with customers • Resolves problems by clarifying issues; researching and exploring answers and alternative solutions; implementing solutions; escalating unresolved problems • Ability to produce meaningful reports and metrics is a plus • Ability to work flexible hours and/or flexible shifts including weekends and holidays if needed • Travel is required (up to 25%) Qualifications:• Bachelor's degree in Computer Science, Computer Engineering, Electrical Engineering, or equivalent work experience preferred • Minimum of 3 years experience in field support servicing complex X86 systems and parts preferred • Will consider an associate degree in electrical technology, electronics, or equivalent military experience • Work experience in large enterprises or certification in Windows and Linux environments is a plus • Emphasize break/fix experience and on-site customer service experience • Hands-on experience with servers (Supermicro, EMC, DELL, HP) • Solid hardware system diagnostics skills, as well as a good understanding of how BIOS, drivers, and application loads can cause system issues • Strong technical communication skills to lead investigations with engineers of multiple disciplines • Strong written and verbal communication skills, project management skills, and solid time management skills • Be able to participate in multiple cross-functional projects concurrently in a rapidly changing environment, within established timelines and have a demonstrated ability to learn and embrace new and changing technologies • Ability to work in a challenging, dynamic, and fast-paced environment with the ability to identify and escalate issues promptly, and be proactive in driving solutions • Full professional proficiency in English (read/write/speak) • Familiarity with Linux is a plus Please note that this position requires regular in-office attendance. The successful candidate is expected to be present in the office during standard working hours as determined by the company. In-office collaboration and participation in team meetings, training sessions, and other on-site activities are essential aspects of this role. Candidates should consider the commuting distance and be prepared to fulfill their responsibilities in the designated office location. Salary Range$70,000 - $100,000**The salary offered will depend on several factors, including your location, level, education, training, specific skills, years of experience, and comparison to other employees already in this role. In addition to a comprehensive benefits package, candidates may be eligible for other forms of compensation, such as participation in bonus and equity award programs.EEO StatementSupermicro is an Equal Opportunity Employer and embraces diversity in our employee population. It is the policy of Supermicro to provide equal opportunity to all qualified applicants and employees without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status or special disabled veteran, marital status, pregnancy, genetic information, or any other legally protected status.

Responsibilities and DutiesEvaluate company's core product line manufacturing to find best practices in materials and processes to provide timely and cost-effective solutions.Identify and implement new cost saving initiatives related to packaging materials, labor, efficiency, transportation, and storage of company's core product line with focus on reduce material usage improved ergonomics, and pallet efficiency.Analyze specifications of company's core product line to determine optimal physical characteristics of container, handling, and types of materials required for use at customers and distribution.Establish standards and guidelines for supplier evaluation. Evaluate suppliers/vendors; periodically conduct vendor reviews and technology updates as it pertains to company's core product line.Oversee and manage company's core product line new development, including the creation of company's core product line designs, prototype, and performance testing.Specify and recommend tools and test methods to develop and validate company's core product line new product developments.Identify and evaluate products and technologies competitive to company's core product line to determine threats or opportunitiesWork with the operations to insure that company's core product line developments are optimized for manufacturability.Develop and implement test plans to ensure that company's core product line containers exceeds customer specifications.Work closely with suppliers, operations, product development, sales, and purchasing.Experience and Educational QualificationsA bachelor's degree in mechanical engineering or packaging engineering. 5+ years of experience in industrial or consumer packaging. A strong proficiency and understanding of packaging and materials such as HDPE and corrugate. Strong problem solving and decision making skills. Must be able to work independently and as part of a team. Must have strong communication skills, orally and in writing. Understanding of process improvement and quality improvement concepts.Understanding of plant operations and manufacturing processes.Must be able to demonstrate project management skills and experience; project management certification a plus.Knowledge in 3D CAD software a plus.Ability to travel up to 75%

The Field Engineer is responsible for gathering customer information and providing designed solutions for enhanced facility operations. Tasks include gathering facility dimensions, providing recommendations for storage, conveyance, sortation, and automated solutions, and selling warehouse solutions. The Field Engineer is responsible for completing accurate and detailed CAD designs and will collaborate with Equipment and Customer Support Sales Reps on warehouse products and opportunities.This role involves business development, project management, sales, and warehouse solutions and CAD design expertise. The Field Engineer reports to the Intralogistics Engineering Director and requires some regional travel.Essential Duties and ResponsibilitiesExecute Intralogistics / Warehouse Solutions strategy.Generate warehouse solutions business with new and existing customers.Produce accurate CAD designs for warehouses to support the sell and execution of racking, conveyor systems, and other automated / complex systems.Sell, execute, and/or project manage the implementation of warehouse design, racking, conveyor, AGVs/automation, automated storage and retrieval systems, material handling robotics, narrow / very narrow aisle equipment, and other intralogistics solutions and warehouse equipment.Collaborate with Sales teams to achieve company goals.Collaborate with leaders and other stakeholders to define strategy for Intralogistics / Warehouse Solutions practice, including solution prioritization, partner strategy, and operational plan.Work with Intralogistics Director, Regional Sales Directors, and/or Officers, to develop new partnerships with solutions providers, including material handling robotics, ASRS, etc.Work with Marketing to build awareness and generate leads for warehouse solutions.Handle other tasks and responsibilities as assigned.What we offer:Competitive pay.Comprehensive benefits.Multiple health plans including one plan with 100% employer paid premiums.Generous 401K matching.100% Employer paid short and long term disability.Industry-leading time off plan with new employees earning 3 weeks of PTO per year and eligible for up to 5 additional sick days.A family owned and operated business that prioritizes the needs of our employees and customers.The ability to grow your career with us through substantial training opportunities for all team members. Training includes both OEM training with our manufacturers and proprietary training developed internally through Bailey University.RequirementsThe individual in this position should be personable, a problem solver, reliable, ethical, intelligent, highly motivated, and able to adapt to the forces around them-customers, suppliers, department employees, and co-workers.Education/Training/ExperienceEngineering Degree (required), with degree in mechanical or industrial engineering preferred.MBA or other related advanced degree (preferred)1-3+ years of experience in industrial engineering, technical sales, material handling robotics, automated storage & retrieval systems, automation/engineered solutions sales, or management consulting in an operations setting.Skills/Knowledge/AbilitiesPrior training and ability to use Auto-CAD to produce highly technical, exact warehouse designs.Knowledge of warehousing, automation / robotics, and engineered solutions space.Great communication skills (written and verbal).Proven project management skills.Strong PowerPoint and Excel capabilities.Outstanding research and analytical abilities.

Covenant LogisticsLogistics EngineerJob ID: 2024-3606US--Run Group: Transport Management ServicesType: Regular Full-TimeOverviewThe logistics engineer is responsible for designing and implementing best practices and standard processes related to driving continuous performance improvement across transportation/distribution operations with Covenant Logistics. This includes implementation of business expansion projects or correct any issues with substandard existing operations.ResponsibilitiesDesigning logistics (Transportation or Distribution) solutions that deliver financial value to our internal or external customersDemonstrating an understanding of our Customer’s businessDeveloping operationally feasible designs that are aligned with our Customer’s needsHelping develop and deliver a compelling proposal that influences the customer decision to select LandairSupport awarded business throughout the startup process, successfully transitioning design and proposal assumptions to OperationsSupport the bid submission process by reviewing RFP documents, understand data, develop questions to clarify gaps and develop initial hypothesis specific to a specific solution design that solves our customer's needs & delivers unique valueData validation, cleansing, profiling, baseline development & defining scenarios to modelCalculating labor, equipment, facility and expense requirements based on transportation and warehousing design assumptions. Develop process flows, concept of operations and value propositions consistent with the win strategy and work with IT to develop concept of systems. Coordinate with Pricing and other functions to develop cost and pricing models as well as relevant assumptionsDevelop optimizations scenarios and strategies that are aligned with objectivesSupport technical review presentations and design validation meetingsImplementation follow-up, which requires engineer to validate and modify deployed process to ensure that it matches planDevelop and improve engineering tools and methodologies to ensure industry best practicesPerform other duties as assignedQualificationsSuperb data organization and cleansing skillsExhibit advanced skills and concepts using design applications, tools, techniques, and methodologies to analyze and design complex transportation and warehousing networksFamiliarity in simulation tools, transportation & warehouse management systems, ERPs, Automation, MHE, Visibility Tools, and industry leading technologies preferredAbility to influence the project teams by using facts, statistics, and analyticsComprehend complex supply chain and transportation solutions and segment design processes into manageable elements and process stepsExcellent verbal, written and presentation skills, including the ability to translate complex designs, concepts, and regulations into terms readily understoodAbility to create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors)Microsoft Office Suite skills with emphasis on Access, Excel and PowerPoint (expert level)Knowledgeable of visualization (Tableau, Microsoft) and database programming (advance level) preferredKnowledge of effective metrics programs and design networks that are sustainable and measurable (advanced level)Must have proficiency in statistical analysis, simulation, and mathematical modelingExperience in programming language (VBA or Python)Transportation Design (Beginner level knowledge):Knowledge of dedicated and managed transportation industryRequired knowledge of equipment type such as dry van, temp control, flat bed, and other specialized equipment Transportation design tools such as: Mojo, AppianWarehouse Design (Intermediate level knowledge):Knowledge of Warehouse Management operations, data analytics, Industrial Engineering, warehouse types (ambient, temp control, warehouse layout/ design and Lean methodsRequired knowledge of material handling solutions and automation types such as: powered industrial truck (PIT) applications; racking and other storage solution designs, packaging equipment; conveyor and sortation equipment; and other automation solutions (e.g. AS/RS)Warehouse Design Tools e.g.: CAD (e.g. AutoCAD); slotting (e.g. Slot3D); Predetermined Motion and Time Systems and methods (e.g. MOST); simulation software and application; Warehouse Management Systems (e.g. HighJump, SAP – DWM or EWM); and Labor Management Systems. Network Design Tools (e.g., Llamasoft) and Data Analytics Software (e.g., Tableau) a plus (Beginner level) Bachelor's degree in Engineering, Business, Supply Chain Management or Industrial EngineeringOne (1) years or more experience in the Transportation industry(e.g., Truckload, Multi-stop TL, LTL, Intermodal, Bulk, Rail, or Parcel services)Two (2) years or more experience in the Warehousing and/or Manufacturing industry (e.g., Industrial Engineering, Warehouse Operations, Operations) Competitive Compensation Covenant’s compensation philosophy’s intent is to use a competitive total compensation strategy to determine the current market value of a position while also considering individual factors such as performance in current position, time in seat of current position, experience, level of responsibility/accountability, and longevity with the company. The system will be objective and non-discriminatory.Pay Range: $82,256.36-$134,656.70Pay Grade: 12 401(k) match, Serious Health Condition PayFull Health Benefits PackageMedical, Dental, Vision, Telemedicine, Short & Long Term Disability, Health Savings Account, Life InsurancePaid Time OffHolidays, Birthday, Wellness Day, Vacation & Sick TimeCultural PerksCasual Dress, Tuition Reimbursement, Employee Discount Program, Dependent Care Flexible Spending Account, Adoption Assistance and Employee Assistance ProgramCovenant Logistics is an Equal Opportunity EmployerM/F/Disability/VeteranVEVRAA Federal Contractor PI240935398

DESCRIPTIONNorth America Sort Centers (NASC) Engineering is searching for an innovative and solutions-oriented Operations Engineer to lead Process Design Engineering in developing and delivering next generation, world-class sortation and transportation processes and design standards. This position will outright own the NASC workspace design standards and will have significant impact on template and retrofit designs for NASC. If the notion of leading engineering projects amongst the world’s brightest talent to full potential excites you; if the idea of using groundbreaking technologies to develop sortation and logistics systems in the multi-national company that is Amazon, then keep reading. Are you an innovative leader that wants to be part of world-class sortation centers and logistics systems across the globe? Do you want a high level of ownership in solving complex problems? Does the challenge of designing systems and processes that leverage ground breaking automated material handling equipment, packaging technologies and robotics appeal to you? If so, we have the job for you! We’re looking to add a high-impact operations engineer to our team. In this role, you will collaborate with internal and external teams develop innovative and cost-effective solutions for our sortation and distribution systems. You will be responsible for creating, managing, updating new standard documents for the space, equipment, and distances involved in every process path and package handling step within NASC. You will own the knowledge and standard process for all of NASC and be a critical input and reference point for upstream design teams and downstream Operations support teams. You will work with a team of highly skilled and highly engaged engineers in a fast-paced and often ambiguous environment. Our team works on hundreds of projects each year. You will be challenged; you will learn; you will work on high impact, high visibility projects; You will grow. Key job responsibilities• Coordinate efforts to develop optimal solutions and processes for the sortation and transportation network through material flow, process design, site layout, and intellectual property considerations. • Collaboration with internal teams and external vendors to generate high-quality workspace innovations for people, MHE, and technology within NASC • Simultaneously manage multiple projects and tasks while effectively influencing, negotiating, and communicating with internal and external business partners, contractors and vendors.• Effective communication skills, ability to execute the vision, detailed roadmap, and specific technical solutions.• Support engineering products and analysis such as, developing rate models of complex MHE systems, ownership of Material Flow Diagrams for new and existing sites, rate analysis, and process feedback for design teams and provide standard documents for network continuous improvement/standardization efforts, in partnership with Engineering Execution and ACES teams• Travel Expectation: 50%We are open to hiring candidates to work out of one of the following locations:Austin, TX, USA | Bellevue, WA, USA | Nashville, TN, USA | New York City, NY, USA | Pittsburgh, PA, USABASIC QUALIFICATIONS- 4+ years of industrial engineer, operations engineer, manufacturing engineer, or project engineer in a manufacturing environment experience- Bachelor's degree- Knowledge of automated material handling systems, packaging technologies and storage solutions- Demonstrate ability to own projects, think big, and influence across all levels of an organization- Excellent communication skills with both technical and non-technical audiences, ability to simplify complex topics for broad audiences- Strong interpersonal skills with the ability to successfully work with othersPREFERRED QUALIFICATIONS- Knowledge of AutoCAD, VBA, and SQL at the intermediate level- Experience working with and managing third party vendors- Experience with Six Sigma, lean manufacturing- Knowledge of SQL and database infrastructure to enable fast-paced analysis- Adept at complex Excel modeling; VBA preferredAmazon is committed to a diverse and inclusive workplace. Amazon is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status. For individuals with disabilities who would like to request an accommodation, please visit https://www.amazon.jobs/en/disability/us.Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $61,300/year in our lowest geographic market up to $126,400/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit https://www.aboutamazon.com/workplace/employee-benefits. Applicants should apply via our internal or external career site.

SUMMARYRepresent the quality function of technical support, in conjunction with other internal support groups, regarding issues affecting manufacturing on global customer accounts. Serve as liaison between Jabil Circuit and suppliers or customers on global quality related issues.LOCATIONThis role will be based on-site at our Memphis, TN facility.Located in one of America's largest logistical hubs, the tenured team at Jabil Memphis helps customers innovate and bring products to market quickly and reliably. The site offers expansive configure-to-order and build-to-order manufacturing services for diverse industry segments.Jabil Memphis has about 750,000 square feet of manufacturing space. The manufacturing capabilities of the team at Jabil Memphis enable this location to provide complete product solutions to our customers in several industries including point-of-sale, storage, and networking and telecommunications. Our configure-to-order and build-to-order capabilities help customers innovate and bring products to market quickly and reliably.ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.• Develop and maintain QA plans and timeliness of global new product introductions utilizing Advanced Product Quality Planning and Process Optimization specific to the customer.• Provide support for all quoting activities by participation in initial process design, development, and implementation phases.• Evaluate and provide input to inspection processes via inspection aids and instruction guidelines.• Support all global training programs specific to their customer by development and implementation of specialized training sessions for all applicable functions.• Develop appropriate systems for document storage, access and review pertaining to global customer accounts.• Review all supplies, internal, and customer discrepancies, coordinate and track the effectiveness of corrective/proactive action efforts.• Conduct periodic review and maintenance of all documentation files; develop appropriate systems for document storage and access.• Review all supplier or customer discrepancies. Coordinate and track the corrective/preventative action effort.• Participate in the vendor survey activities as applicable. Drive proactive participation with suppliers and (when possible) aid in their process improvement efforts.• Interface with all departments as applied to the Policies and Procedures.• Provide insight and assistance of implementing and maintaining Process Improvement and Optimization concentrating on proactive methodologies.• Assist in driving the standardization of manufacturing processes of global customer accounts.• Interface and provide technical support on quality issues with the customer as needed.• Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.• Comply and follow all procedures within the company security policy.MINIMUM REQUIREMENTS• Bachelor's degree in Mechanical Engineering or related field required and 5+ years of related quality experience, or equivalent combination of education and experience.• Experience with point-to-point wiring is strongly preferred.