Packaging Engineer Salary in Tennessee, USA

DescriptionDomtar is a leading provider of a wide variety of fiber-based products including communication, specialty and packaging papers, market pulp and airlaid nonwovens. With approximately 6,300 employees serving more than 50 countries around the world, Domtar is driven by a commitment to turn sustainable wood fiber into useful products that people rely on every day. Domtar's principal executive office is in Fort Mill, South Carolina and Domtar is part of the Paper Excellence group of companies. To learn more, visit www.domtar.com.Domtar is seeking an Environmental Engineer at their Packaging Mill in Kingsport, Tennessee. The Environmental Engineer reports to the Environmental Manager. Key responsibilities include, but are not limited to, compiling and submitting monitoring reports; reporting environmental incidents and excursions; assisting with the development of the Environmental Management System (EMS) and serving as a resource to all departments within the Kingsport Mill Operations.GENERAL PERFORMANCE• Serves as a resource to Kingsport Mill Operations and Maintenance Departments to ensure thatsystems and processes are established that result in meeting or exceeding the environmentalregulations and Domtar performance standards and expectations.• Leads, facilitates and/or participates in the investigation of all environmental incidents and creation andimplentation of necessary corrective measures.• Conducts tasks within and serves as subject matter expert for the structured EMS system.• Develops environmental standard operating procedures and reviews operational and maintenanceprocedures to ensure that environmental considerations are incorporated when and where applicable.• Identifies trends in recurring environmental incidents and facilitates teams to address. Leverages bestpractices set forth across the Domtar mill footprint.• Stays current on environmental regulations, policies, and programs.• Ensures that document control procedures are established and followed for the identification, storage,retrieval, and disposition of environmental records.• Participates in corporate sponsored environmental audits upon request.SAFETY AND ENVIRONMENTAL• Maintains certification in EPA Method 9 visual opacity measurement.• Ensures that accurate and complete reports to Environmental Regulatory Agencies are submitted in atimely mannersuch as Discharge Monitoring Reports (DMRs), Toxic Release Inventory Reports, WaterWithdrawal Reports, Tier 2 Reports, Boiler MACT Reports, Title V Reports and Hazardous WasteReports.• Makes scheduled rounds to verify environmental standards and expectations are being met.• Responds promptly to critical eventsto prevent and mitigate emission/release impacts.• Establishes and maintains effective procedures to meet housekeeping standards at all monitoring andtesting locations.• Reviews new chemicals used on-site to minimize hazardous waste generation and exposure tohazardous chemicals.• Lead assigned regulatory program areas. Program areas could include, but not limited to NPDES,Refrigerant Compliance, Solid Waste, Title V, Stormwater.TRAINING• Leads and/or participates in new employee orientation as an instructor on environmental commitmentand compliance.• Follows priorities and deadlines as set by legislation, regulation, and company requirements.• Plans and conducts annual and periodic training for Mill employees.PRODUCTION SUPPORT • Provide on-call environmental services for off-hours and weekends. • Ensures timely and accurate data is generated to support compliance status. • Works with the Operations and Maintenance Departments in developing standard operating procedures that includes the appropriate material for ensuring environmental monitoring and control of the operation. This may include operating checklists and operating parameters. • Develops standard operating procedures for abnormal operating conditions including start-up, shutdown, and malfunction conditions; incidents, accidents, and potential emergency situations; past activities, current activities, and planned activities.QUALITY • Audits in-house and contract lab environmental testing and analyses. • Uses monitoring information to identify opportunities to improve environmental performance levels or reduce variability. • Reviews and investigates complaints made on behalf of community residents, city officials, etc.Required Qualifications/Professional Experiences Years of Experience/Education/Certifications• Five (5) years of direct experience in environmental engineering/management. • Experience in environmental permitting. • Experience in regulatory agency interface. • Knowledge of Water and Air programs. • Versatile in Microsoft Office. • B.S. in an Environmental Engineering field, Environmental Sciences, Chemical Engineering or other relevant fieldDomtar is an equal opportunity employer. Qualified applicants will be considered without regard to age, race, color, sex (including gender identity or expression, sexual orientation, and pregnancy), marital status, religion, national origin, genetic information, disability, or veteran status.

DescriptionDomtar is a leading provider of a wide variety of fiber-based products including communication, specialty and packaging papers, market pulp and airlaid nonwovens. With approximately 6,300 employees serving more than 50 countries around the world, Domtar is driven by a commitment to turn sustainable wood fiber into useful products that people rely on every day. Domtar's principal executive office is in Fort Mill, South Carolina and Domtar is part of the Paper Excellence group of companies. To learn more, visit www.domtar.com. Domtar's Packaging mill in Kingsport, TN is searching for an experienced Sr Process Control Engineer.This position reports to the Maintenance and Engineering Manager and will have primary responsibilities to provide support for the distributed control system (DCS) software and hardware across the Mill. The Sr Process Control Engineer will work with Maintenance, Operations, and technical personnel to optimize existing control systems as well as to plan and design new applications. This role will become fully integrated into the Mill, working directly with executives and management with an assigned mentor to maximize growth and development.Key ResponsibilitiesOptimization Projects / Capital ProjectsResponsible for optimization of existing mill control systemsResponsible for plan, design, and implementation of control systems / new applicationsOrganizational EffectivenessGuide Operational and Electrical Maintenance work teams during technical troubleshooting of Mill's process control systemsWork effectively with every level of the organizationSafetyBe a safety advocate, lead by exampleDrive team efforts to identify root cause of issues, identify permanent corrective actions, document in mill-wide database, and provide follow-upRequired QualificationsB.S. / M.S. in Electrical Engineering from an ABET accredited university; other engineering degrees will be considered coupled with process control experienceTen (10) years of experience in manufacturing environment, preferably paper manufacturingFive (5) years of experience with ABB and/or Valmet distributed controls systems; other DCS system experience will be consideredAbility to provide on-call, after hours, and weekend coverage as neededProficient with Microsoft Office applicationsTechnical writing and presentation skillsPreferred QualificationsTen (10) years process control experienceExpert level knowledge of ABB and Valmet control systemsExperience Trouble Shooting Instrumentation Hardware (transmitters, drives, etc.)Experience configuring and troubleshooting communication links (OPC, Modbus, etc.)Working knowledge of PI, ParcView and SAPWell-developed troubleshooting skills - analytical, critical thinking and problem solvingKnowledge and understanding of safe work practices; ability to comply with and enforce Company safety and environmental policies / proceduresAbility to prioritize and make sound decisions, and resolve issues efficiently and effectivelyExceptional oral and written communication skills and the ability to communicate effectively with various departments and individuals (internal and external)Excellent organizational and planning skills, with the ability to multi-taskTeam player attitude, with the ability to work with diverse teams, multiple organizational levels and across business functionsResults focused and detail-orientedHigh level of initiative and motivationResourceful, quick learner and dependableDemonstrated leadership skills Domtar is an equal opportunity employer. Qualified applicants will be considered without regard to age, race, color, sex (including gender identity or expression, sexual orientation, and pregnancy), marital status, religion, national origin, genetic information, disability, or veteran status.

DescriptionDomtar is a leading provider of a wide variety of fiber-based products including communication, specialty and packaging papers, market pulp and airlaid nonwovens. With approximately 6,300 employees serving more than 50 countries around the world, Domtar is driven by a commitment to turn sustainable wood fiber into useful products that people rely on every day. Domtar's principal executive office is in Fort Mill, South Carolina and Domtar is part of the Paper Excellence group of companies. To learn more, visitwww.domtar.com. Domtar's Packaging mill in Kingsport, TN is searching for an experiencedReliability Mechanical Engineer.This position is part of the Kingsport Packaging Mill Maintenance Team and plays a critical role in the overall reliability and performance of manufacturing and infrastructure equipment. The Reliability Engineer's primary purpose is to lead the team of hourly and contract employees to maintain and improve the mill's asset base. This will be done using predictive and preventative maintenance technology including but not limited to tools such as vibration analysis, infrared, ultrasonic, precision lubrication, and motion amplification (high speed camera).Key ResponsibilitiesCoordinates equipment and facility maintenance / repairs with Operations and other key personnel to:minimize downtime;ensure work is properly and safely completed and in a timely manner;preventative and predictive technology work will be primary focusCollaborates with Operations Superintendent, Assistant Superintendent and other key personnel to plan work assignments, schedule projects, and determine cost estimates / budget.Identifies and implements improvements in process and equipment reliability across the Mill by working closely with Operations, Maintenance, and Engineering personnel.Supports maintenance team by assisting with resolving technical issues and repair procedures / troubleshooting.Required QualificationsMinimum of three (3) years reliability leadership experience; B.S. in Engineering; or Associate degree in a maintenance and/or reliability related fieldAbility to lead safety improvements through personal commitment and procedures; knowledge of industrial safety procedures and regulationsStrong written, verbal, interpersonal, and listening communication skillsAnalytical, critical thinking, and proven problem-solving skillsProven success building a successful teamProficient planning, organization, and time-management skillsResults focused and detail orientedPreferred QualificationsWorking degree of computer literacy, including computer-based maintenance software (SAP) and Microsoft OfficeMinimum three (3) years of demonstrated strong leadership skills and experience leading a reliability team in a manufacturing facility to achieve excellent results;Knowledgeable in areas of electrical, mechanical, hydraulic, pneumatic, and reliabilityExperience developing and managing predictive technology programs (including but not limited to vibration analysis, ultrasonic, motion amplification, and infrared routes)Experience developing and managing preventative technology programs (including but not limited to precision lubrication and essential care routes)Experience in development and implementation of reliability training programsRotating equipment troubleshooting aptitudeCritical Competencies for SuccessAbility to communicate effectively with employees at all levels within the millHigh degree of collaboration with both Maintenance and Operations personnelAbility to interpret and apply principles of a Collective Bargaining Agreement (CBA)Domtar is an equal opportunity employer. Qualified applicants will be considered without regard to age, race, color, sex (including gender identity or expression, sexual orientation, and pregnancy), marital status, religion, national origin, genetic information, disability, or veteran status.

DESCRIPTIONAre you an innovative engineer that wants to design the next generation of world-class fulfillment centers and logistics systems across the globe? Do you want a high level of ownership in solving complex problems? Does the idea of designing systems that leverage ground breaking automated material handling equipment, packaging technologies and robotics appeal to you? If so, we have the job for you! We’re looking to add a high-impact engineer to our team in our Nashville. In this role, you will partner with internal and external teams to design high quality, cost effective solutions for our fulfillment and distribution systems. You will own multiple projects simultaneously, from concept realization through design approval. You will be our suppliers’ primary point of technical contact for your projects. Then, once the design is completed and approved, you will hand-off the project to our Ops Engineering team who will oversee the installation and commissioning of the project. You’ll continue working with that team to ensure that the system you’ve designed is successfully installed, commissioned and launched.Your projects will include green-fields, brown-fields, and retrofits. Our team to designs fulfillment centers, cross-dock facilities, specialty facilities (ex. reverse logistics, hazmat) and ground and air transportation centers throughout North America and Europe. Your projects will be a variety of template-based and designed-from-scratch.You will work with a team of highly skilled and highly engaged engineers in a fast-paced and often ambiguous environment. Our team works on hundreds of projects each year. You will learn; you will work on high impact, high visibility projects; you will grow.A day in the lifeAmazon offers a full range of benefits that support you and eligible family members, including domestic partners and their children. Benefits can vary by location, the number of regularly scheduled hours you work, length of employment, and job status such as seasonal or temporary employment. The benefits that generally apply to regular, full-time employees include:1. Medical, Dental, and Vision Coverage2. Maternity and Parental Leave Options3. Paid Time Off (PTO)4. 401(k) PlanIf you are not sure that every qualification on the list above describes you exactly, we'd still love to hear from you! At Amazon, we value people with unique backgrounds, experiences, and skill sets. If you’re passionate about this role and want to make an impact on a global scale, please apply!We are open to hiring candidates to work out of one of the following locations:Nashville, TN, USABASIC QUALIFICATIONS - Bachelor’s degree in Engineering (any discipline) or foreign equivalent or a related field, or 2+ years Amazon experience. - 5+ years of experience in Design/Innovation Engineering, Manufacturing/Process/Industrial Engineering, or related - Experience must involve ownership/management of engineering design projects. - Proficiency using business/technical software like MS Excel, MS Project, and CAD software. - Ability to travel 20% globally. PREFERRED QUALIFICATIONS - Master’s degree in Engineering (any discipline) or foreign equivalent, Operations, Business Administration, or a related field and at least five years of experience in the specialty. - Experience with complex automated material handling equipment, packaging technologies, robotics and/or high-speed manufacturing. - Experience with process design and based on Lean Principles. - Proficiency with concepts like system architecture, optimization, system dynamics, and using statistics and data to solve problems - Design-in-Safety experienceAmazon is committed to a diverse and inclusive workplace. Amazon is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status. For individuals with disabilities who would like to request an accommodation, please visit https://www.amazon.jobs/en/disability/us.

DESCRIPTIONAre you an innovative professional that wants to design the next generation of world-class fulfillment centers and logistics systems across the globe? Do you want a high level of ownership in solving complex problems? Does the idea of designing systems that leverage ground breaking automated material handling equipment, packaging technologies and robotics appeal to you? If so, we have the job for you! We’re looking to add a high-impact engineer to our team in our Nashville. In this role, you will partner with internal and external teams to design high quality, cost effective solutions for our fulfillment and distribution systems. You will own multiple projects simultaneously, from concept realization through design approval. You will be our suppliers’ primary point of technical contact for your projects. Then, once the design is completed and approved, you will hand-off the project to our Ops Engineering team who will oversee the installation and commissioning of the project. You’ll continue engaging with that team to ensure that the system you’ve designed is successfully installed, commissioned and launched.Your projects will include green-fields, brown-fields, and retrofits. Our team designs fulfillment centers, cross-dock facilities, specialty facilities (ex. reverse logistics, hazmat) and ground and air transportation centers throughout North America and Europe. Your projects will be a variety of template-based and designed-from-scratch.You will work with a team of highly skilled and highly engaged engineers in a fast-paced and often ambiguous environment. Our team works on hundreds of projects each year. You will learn; you will work on high impact, high visibility projects; you will grow.A day in the lifeAmazon offers a full range of benefits that support you and eligible family members, including domestic partners and their children. Benefits can vary by location, the number of regularly scheduled hours you work, length of employment, and job status such as seasonal or temporary employment. The benefits that generally apply to regular, full-time employees include:1. Medical, Dental, and Vision Coverage2. Maternity and Parental Leave Options3. Paid Time Off (PTO)4. 401(k) PlanIf you are not sure that every qualification on the list above describes you exactly, we'd still love to hear from you! At Amazon, we value people with unique backgrounds, experiences, and skill sets. If you’re passionate about this role and want to make an impact on a global scale, please apply!We are open to hiring candidates to work out of one of the following locations:Nashville, TN, USABASIC QUALIFICATIONS - Bachelor’s degree in Engineering (any discipline) or foreign equivalent or a related field, or 2+ years Amazon experience. - 5+ years of experience in Design/Innovation Engineering, Manufacturing/Process/Industrial Engineering, or related - Experience must involve ownership/management of engineering design projects. - Proficiency using business/technical software like MS Excel, MS Project, and CAD software. - Ability to travel 20% globally. PREFERRED QUALIFICATIONS - Master’s degree in Engineering (any discipline) or foreign equivalent, Operations, Business Administration, or a related field and at least five years of experience in the specialty. - Experience with complex automated material handling equipment, packaging technologies, robotics and/or high-speed manufacturing. - Experience with process design and based on Lean Principles. - Proficiency with concepts like system architecture, optimization, system dynamics, and using data for problem solving. - Design-in-Safety experienceAmazon is committed to a diverse and inclusive workplace. Amazon is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status. For individuals with disabilities who would like to request an accommodation, please visit https://www.amazon.jobs/en/disability/us.

Covenant LogisticsLogistics EngineerJob ID: 2024-3606US--Run Group: Transport Management ServicesType: Regular Full-TimeOverviewThe logistics engineer is responsible for designing and implementing best practices and standard processes related to driving continuous performance improvement across transportation/distribution operations with Covenant Logistics. This includes implementation of business expansion projects or correct any issues with substandard existing operations.ResponsibilitiesDesigning logistics (Transportation or Distribution) solutions that deliver financial value to our internal or external customersDemonstrating an understanding of our Customer’s businessDeveloping operationally feasible designs that are aligned with our Customer’s needsHelping develop and deliver a compelling proposal that influences the customer decision to select LandairSupport awarded business throughout the startup process, successfully transitioning design and proposal assumptions to OperationsSupport the bid submission process by reviewing RFP documents, understand data, develop questions to clarify gaps and develop initial hypothesis specific to a specific solution design that solves our customer's needs & delivers unique valueData validation, cleansing, profiling, baseline development & defining scenarios to modelCalculating labor, equipment, facility and expense requirements based on transportation and warehousing design assumptions. Develop process flows, concept of operations and value propositions consistent with the win strategy and work with IT to develop concept of systems. Coordinate with Pricing and other functions to develop cost and pricing models as well as relevant assumptionsDevelop optimizations scenarios and strategies that are aligned with objectivesSupport technical review presentations and design validation meetingsImplementation follow-up, which requires engineer to validate and modify deployed process to ensure that it matches planDevelop and improve engineering tools and methodologies to ensure industry best practicesPerform other duties as assignedQualificationsSuperb data organization and cleansing skillsExhibit advanced skills and concepts using design applications, tools, techniques, and methodologies to analyze and design complex transportation and warehousing networksFamiliarity in simulation tools, transportation & warehouse management systems, ERPs, Automation, MHE, Visibility Tools, and industry leading technologies preferredAbility to influence the project teams by using facts, statistics, and analyticsComprehend complex supply chain and transportation solutions and segment design processes into manageable elements and process stepsExcellent verbal, written and presentation skills, including the ability to translate complex designs, concepts, and regulations into terms readily understoodAbility to create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors)Microsoft Office Suite skills with emphasis on Access, Excel and PowerPoint (expert level)Knowledgeable of visualization (Tableau, Microsoft) and database programming (advance level) preferredKnowledge of effective metrics programs and design networks that are sustainable and measurable (advanced level)Must have proficiency in statistical analysis, simulation, and mathematical modelingExperience in programming language (VBA or Python)Transportation Design (Beginner level knowledge):Knowledge of dedicated and managed transportation industryRequired knowledge of equipment type such as dry van, temp control, flat bed, and other specialized equipment Transportation design tools such as: Mojo, AppianWarehouse Design (Intermediate level knowledge):Knowledge of Warehouse Management operations, data analytics, Industrial Engineering, warehouse types (ambient, temp control, warehouse layout/ design and Lean methodsRequired knowledge of material handling solutions and automation types such as: powered industrial truck (PIT) applications; racking and other storage solution designs, packaging equipment; conveyor and sortation equipment; and other automation solutions (e.g. AS/RS)Warehouse Design Tools e.g.: CAD (e.g. AutoCAD); slotting (e.g. Slot3D); Predetermined Motion and Time Systems and methods (e.g. MOST); simulation software and application; Warehouse Management Systems (e.g. HighJump, SAP – DWM or EWM); and Labor Management Systems. Network Design Tools (e.g., Llamasoft) and Data Analytics Software (e.g., Tableau) a plus (Beginner level) Bachelor's degree in Engineering, Business, Supply Chain Management or Industrial EngineeringOne (1) years or more experience in the Transportation industry(e.g., Truckload, Multi-stop TL, LTL, Intermodal, Bulk, Rail, or Parcel services)Two (2) years or more experience in the Warehousing and/or Manufacturing industry (e.g., Industrial Engineering, Warehouse Operations, Operations) Competitive Compensation Covenant’s compensation philosophy’s intent is to use a competitive total compensation strategy to determine the current market value of a position while also considering individual factors such as performance in current position, time in seat of current position, experience, level of responsibility/accountability, and longevity with the company. The system will be objective and non-discriminatory.Pay Range: $82,256.36-$134,656.70Pay Grade: 12 401(k) match, Serious Health Condition PayFull Health Benefits PackageMedical, Dental, Vision, Telemedicine, Short & Long Term Disability, Health Savings Account, Life InsurancePaid Time OffHolidays, Birthday, Wellness Day, Vacation & Sick TimeCultural PerksCasual Dress, Tuition Reimbursement, Employee Discount Program, Dependent Care Flexible Spending Account, Adoption Assistance and Employee Assistance ProgramCovenant Logistics is an Equal Opportunity EmployerM/F/Disability/VeteranVEVRAA Federal Contractor PI240935398

DescriptionDomtar is a leading provider of a wide variety of fiber-based products including communication, specialty and packaging papers, market pulp and airlaid nonwovens. With approximately 6,300 employees serving more than 50 countries around the world, Domtar is driven by a commitment to turn sustainable wood fiber into useful products that people rely on every day. Domtar's principal executive office is in Fort Mill, South Carolina and Domtar is part of the Paper Excellence group of companies. To learn more, visitwww.domtar.com. Domtar's Packaging mill in Kingsport, TN is searching for an experiencedElectrical Engineer.The Plant Electrical Engineer is responsible for the proper operation, maintenance, inspections, coordination and reliability of the mill's power distribution system. The engineer will represent the mill and coordinate activity and resolve issues between the mill power distribution system and the mill electrical power provider. The engineer will also be involved in identifying and developing capital projects relating to power distribution upgrades consistent with NFPA70E and the National Electrical Code and installations, modifications, and upgrades of AC and DC variable speed drives and motors, programmable logic controllers, motor controls and motor control centers as well as maintaining our assets and driving reliability improvements. Growth opportunities exist within the mill as well as the wider Domtar organization.Job Responsibilities:Facilitate the identification, prioritization, and implementation of key improvement opportunities within our power distribution network.Facilitate the identification, prioritization, and implementation of capital improvement opportunities on Paper Machinesand supporting equipment.Facilitate the identification, prioritization, and implementation of reliability improvement and asset management.Ensure that correct specifications, standards, tools, and safety practices are in place and being used to allow proper decisions at the proper level of the organization.Effectively manage relationships and information between the corporation, the mill and supplies/contractors.Provide tactical involvement in the area of drives both package and sectional.Participate in or lead problem solving events (PSE) for internal issues of note.Promote and support activities that support Best-In-Class safety performance.Participate in updates of mill electrical safety procedures.Participate in yearly annual outages to maintain the proper operation of the mill power distribution system.Maintain open business relationships with other engineering professionals within the Domtar organization to identify and share best practice.Required Qualifications:Bachelors of Science in Electrical Engineering.Proficiency with modern pc-based office software tools, proficiency with AutoCAD.Minimum of five (5) to seven (7) years' experience in manufacturing or power distribution management.Minimum of three (3) years' experience in AC Variable speed drives.Minimum of three (3) years' experience in PLC's.Strong project management, planning, communication, and problem solving skills.Preferred Qualifications:Ten (10) years of experience in manufacturing or power distribution management.Five (5) years of experience in AC Variable speed drives.Five (5) years of experience in PLC's.Five (5) years of CMMS System experience (preferably SAP, others will be considered).Domtar is an equal opportunity employer. Qualified applicants will be considered without regard to age, race, color, sex (including gender identity or expression, sexual orientation, and pregnancy), marital status, religion, national origin, genetic information, disability, or veteran status.

Experience: BS ChemE ME or related with 2-10 years experience from most any process industry. Examples of Process Improvement with six sigma and PSM being desired skill setsBelow is clients description and requirements2 MT ( Manufacturing and Technology) Engineer opportunities at the Memphis, Tennessee manufacturing facility. Memphis, TN, known as the "Bluff City" and "Birthplace of Rock 'n' Rock," is located in the southwest corner of TN along the Mississippi river. Memphis provides its residents fantastic music, arguably the best barbeque, and a relaxed pace of life. The Memphis area also offers great suburban living options with Bartlett, Cordova, Germantown, and Collierville TN and Southaven and Olive Branch MS as commuting options and some of the best school districts in the state. Tennessee sets itself apart from many other states by not imposing a state income tax.These roles provide technical engineering services and will work closely with the Site Manufacturing Technology Leader, Site Engineering, Process R&D, and the Capital Engineering team to support day-to-day operation, process safety management, capital project business justification, design, installation, productivity improvement, and new product scale-up in operation sites. Job requirements. Engineer I:Bachelor's degree or higher in engineering, preferably Electrical or Chemical Engineering or Food Science & Engineering.2 - 5 years of working experience in an engineering or manufacturing environment. (10+ years preferred). Engineer II: Bachelor's degree or higher in engineering, preferably Electrical or Chemical Engineering or Food Science & Engineering.5+ years of working experience in an engineering or manufacturing environment. (10+ years preferred). A preferred candidate will have demonstrated knowledge and experience in Hygienic Design, Process Safety Management, liquid-solid separations, spray drying, packaging, statistical analysis, process design capability, and Six Sigma.Ability to work independently with excellent time management and judgment in prioritization of skills.Interpersonal and communication (written and verbal) skills to engage teams and align stakeholders in a matrixed organization.Strong knowledge and experience in process safety management. Ability to travel

Our client is the largest beverage copacker in the US. Representing many spirited and non-spirited brands, their business is growing!POSITION SUMMARY The ideal candidate is a self-starter with proven leadership skills and has a minimum of 5 years of experience in developing PLC, DCS, and HMI code for automated packaging equipment and troubleshooting industrial controls and mechanical repairs. Experience leading frontline multi-craftsmen, developing and leading preventative/predictive maintenance. Must be available to work and support off shifts and weekends and/or as needed.ESSENTIAL DUTIES AND RESPONSIBILITIES • Design and program all aspects of PLC/HMI software for packaging equipment• Test and debug control system• Create, update, and modify machine, part, or facilities schematics using a CAD program.• Both AC and DC Drive experience with various drive platforms.• Write and modify, extensive PLC's, DCS's and HMI's programs for the following:o Delta Vo Allen Bradleyo Modicono Omrono Comark• Troubleshoot or establish control networks.o EtherNet / IPo DeviceNeto DH-485o Modbuso Modbus Plus• Troubleshoot electrical, mechanical, pneumatic and hydraulic systems• Electrical schematic design and drafting using AutoCAD Electrical• Troubleshoot Process control systems in particular packaging line control• Perform all duties within GMP standards.• Perform all functions as required within the CMMS• Train and evaluate trainees front line techs• Perform additional duties as assigned.• Responsible for department compliance with GMP, HACCP, and FSMA guidelinesREQUIRED SKILLS • Software skills to include, o RS logix 500 and 5000o ProWorks NXTo Delta Vo Wonderware• Substantial Electrical experience• Ability to work with a minimum of supervision.• Ability to work in a team environment.• Ability to identify, analyze, and solve problems.• Coordination and dexterity needed to use power tools and hand tools.• Coordination and dexterity needed to climb fixed and portable ladders.QUALIFICATIONS • College degree in Electrical Engineering or 5+ years of experience in PLC controls engineering in lieu of a degree• Delta V programming experience• Alen Bradley PLC and motion controls experience.• Root Cause Analysis and continuous improvement experience• System process controls and line balancing experience• Advanced knowledge of electrical systems, control power and drives, sanitary control principles, operation, and troubleshooting• Possess excellent communication, planning, and multi-tasking skills.• Strong leadership and team skills.• Good judgment and common sense.COMPETENCIES Decision Making and Problem-SolvingFlexibilityInnovationLeadershipQualityTeam WorkThis position description is intended to guide the activities of the Process Control Engineer. It is not intended to limit the thinking and creativity of the person to the work of this function, nor is it intended to describe all the work that may be required of the person in this position.PHYSICAL AND MENTAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential function of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.While performing the duties of this job, the employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; climb stairs; balance; stoop, kneel, crouch or crawl; talk or hear. The employee must occasionally lift and/or move up to 25 pounds. Specific vision requirements in close vision and the ability to adjust focus.

Requirements:-Electrical engineer - 5 years experience-Quality control experience for switchgear-Fabrication Inspection experience- Understand electrical engineering principles including switch gear, UPS, transformers, and circuit breakers. Understand mechanical engineering principles for cooling systems.- Bachelor's Degree or Higher in Engineering- 4+ years of experience with new product design, development, product Certification and support manufacturing of power distribution equipment.- Experience with low voltage (LV) distribution products with focus on switchgear, switchboards and panelboards. Switchgear design experience preferred.- Experience directly related to the design or construction of data centers/critical infrastructure or large scale mechanical and electrical plants.- Value engineering: proven ability to reduce costs through creative solutions with no impact on quality and reliability (new designs, technology, or construction methods).- Able to read and interpret construction specifications and drawings for all disciplines.- Experience with large scale technical operations or large-scale compute farms.- Knowledge of building codes and regulations including UL891, UL508, UL1066, UL1558, IEEE/ANSI C37, Life Safety, BOCA, NFPA, NEC, and OSHA.- Experience in controls and commissioning of large-scale projects.- Need to have strong communication skills and project manager qualities- Experience with power management and power monitoring systems.Plusses:Background in Risk Analysis and/or ManufacturingCertifications such as Professional Engineer (PE), LEED, and/or Certified Construction Manager (CCM)Day to Day:Track CMf performance through Defect Per Unit ( DPU), Incoming Defect Rate (IDR), NCRs, and inspection reports to plot their performance in order to help Owner determine if/when inspection waivers may be granted and to which level. Also, to work with the CMf to drive down their defects and improve the quality, consistency, and efficiency of their output. Oversee the shipping and packaging of the complete units (along with a FOD inspection). Ensure proper waterproofing, stability, offloading ability (after delivered), etc. Oversee the shipping and packaging of the complete units (along with a FOD inspection). Ensure proper waterproofing, stability, offloading ability (after delivered), etc. Work with Owner's Project and Product Managers to understand understand deliver schedules and work with CMfs ensure timelines are met.Define data center system-level architecture, specify/document performance and equipment requirements, create/communicate conceptual designs, and create/maintain project documentation.