Chemical Engineer Salary in Tennessee, USA

DescriptionDomtar is a leading provider of a wide variety of fiber-based products including communication, specialty and packaging papers, market pulp and airlaid nonwovens. With approximately 6,300 employees serving more than 50 countries around the world, Domtar is driven by a commitment to turn sustainable wood fiber into useful products that people rely on every day. Domtar's principal executive office is in Fort Mill, South Carolina and Domtar is part of the Paper Excellence group of companies. To learn more, visit www.domtar.com.Domtar is seeking an Environmental Engineer at their Packaging Mill in Kingsport, Tennessee. The Environmental Engineer reports to the Environmental Manager. Key responsibilities include, but are not limited to, compiling and submitting monitoring reports; reporting environmental incidents and excursions; assisting with the development of the Environmental Management System (EMS) and serving as a resource to all departments within the Kingsport Mill Operations.GENERAL PERFORMANCE• Serves as a resource to Kingsport Mill Operations and Maintenance Departments to ensure thatsystems and processes are established that result in meeting or exceeding the environmentalregulations and Domtar performance standards and expectations.• Leads, facilitates and/or participates in the investigation of all environmental incidents and creation andimplentation of necessary corrective measures.• Conducts tasks within and serves as subject matter expert for the structured EMS system.• Develops environmental standard operating procedures and reviews operational and maintenanceprocedures to ensure that environmental considerations are incorporated when and where applicable.• Identifies trends in recurring environmental incidents and facilitates teams to address. Leverages bestpractices set forth across the Domtar mill footprint.• Stays current on environmental regulations, policies, and programs.• Ensures that document control procedures are established and followed for the identification, storage,retrieval, and disposition of environmental records.• Participates in corporate sponsored environmental audits upon request.SAFETY AND ENVIRONMENTAL• Maintains certification in EPA Method 9 visual opacity measurement.• Ensures that accurate and complete reports to Environmental Regulatory Agencies are submitted in atimely mannersuch as Discharge Monitoring Reports (DMRs), Toxic Release Inventory Reports, WaterWithdrawal Reports, Tier 2 Reports, Boiler MACT Reports, Title V Reports and Hazardous WasteReports.• Makes scheduled rounds to verify environmental standards and expectations are being met.• Responds promptly to critical eventsto prevent and mitigate emission/release impacts.• Establishes and maintains effective procedures to meet housekeeping standards at all monitoring andtesting locations.• Reviews new chemicals used on-site to minimize hazardous waste generation and exposure tohazardous chemicals.• Lead assigned regulatory program areas. Program areas could include, but not limited to NPDES,Refrigerant Compliance, Solid Waste, Title V, Stormwater.TRAINING• Leads and/or participates in new employee orientation as an instructor on environmental commitmentand compliance.• Follows priorities and deadlines as set by legislation, regulation, and company requirements.• Plans and conducts annual and periodic training for Mill employees.PRODUCTION SUPPORT • Provide on-call environmental services for off-hours and weekends. • Ensures timely and accurate data is generated to support compliance status. • Works with the Operations and Maintenance Departments in developing standard operating procedures that includes the appropriate material for ensuring environmental monitoring and control of the operation. This may include operating checklists and operating parameters. • Develops standard operating procedures for abnormal operating conditions including start-up, shutdown, and malfunction conditions; incidents, accidents, and potential emergency situations; past activities, current activities, and planned activities.QUALITY • Audits in-house and contract lab environmental testing and analyses. • Uses monitoring information to identify opportunities to improve environmental performance levels or reduce variability. • Reviews and investigates complaints made on behalf of community residents, city officials, etc.Required Qualifications/Professional Experiences Years of Experience/Education/Certifications• Five (5) years of direct experience in environmental engineering/management. • Experience in environmental permitting. • Experience in regulatory agency interface. • Knowledge of Water and Air programs. • Versatile in Microsoft Office. • B.S. in an Environmental Engineering field, Environmental Sciences, Chemical Engineering or other relevant fieldDomtar is an equal opportunity employer. Qualified applicants will be considered without regard to age, race, color, sex (including gender identity or expression, sexual orientation, and pregnancy), marital status, religion, national origin, genetic information, disability, or veteran status.

Sr. Engineer - Instrument & Controls Career Area: Engineering - Mechanical What We're Looking For: Join our dynamic team at Barge Design Solutions, where innovation meets expertise in the realms of architecture and engineering. We are actively seeking a Sr. Engineer - Instrumentation & Controls to be the authoritative force in our pursuit of advanced concepts, principles, and methods within a designated area. Duties & Responsibilities As a Sr. Engineer - Instrumentation & Controls, you will serve as the authority in your discipline, staying abreast of new developments and requirements to recommend changes that drive positive impacts. With a focus on complex features, you'll lead multiple major projects as a technical expert, contributing to the overall success of our firm. Your responsibilities include: Design and document technical solutions for a specific discipline or market practice area. Manage and maintain project documentation within your discipline or practice area. Provide significant technical design expertise, identifying considerations and potential issues, and participating in research and development of solutions. Support Project Managers as a technical leader on large complex projects. Review project documents for conformity and quality assurance. Assist leadership and staff as a technical advisor. Lead complex technical discussions in meetings with clients. Develop strong relationships with clients, customers, officials, contractors, and other collaborators. Performs other duties as assigned. Education & Experience Qualifications: Bachelor's degree from an accredited program. Minimum of 10 years of engineering experience in industrial and chemical engineering projects. Professional Engineer (PE) registration. Instrument specifications (ISA), Loop Sheets/Writing Designs/Instrument lists. Knowledge in in DCS, PLC hardware and Integration Control System Narratives Key Skills Extensive knowledge and progressive expertise to resolve crucial issues and unique conditions. Proactively evaluate and implement new methods and developments that positively impact the organization. Guided by the overall Business Unit Strategy. Effective collaboration with business and teams to meet shared objectives. Expectations Provide overall leadership in your market practice area or discipline. Align utilization rates with set goals. Develop and implement a plan to meet individual sales goals for specific clients and/or primarily single discipline opportunities. Embrace our Purpose, Vision, and Values. Why join us? Barge Design Solutions, Inc., is an engineering and architecture firm with diverse in-house multidisciplinary practice areas. The employee-owned company is more than 550+ people strong and serves clients nationwide from multiple U.S. locations. Barge is ranked on Engineering News-Record (ENR)'s Top 500 Design Firms and Architectural Record's Top 300 Architecture Firms and is a certified Great Place To Work. Our primary purpose for being in business is ultimately to create a better life by unleashing the potential of our people, clients and communities. This purpose is supported by our company's core values because at the end of the day, Barge CARES: Collaborate - Help and expect help. Teamwork is essential in what we do. Authentic - Honesty, integrity and trust are at the heart of everything we do. We are who we say we are. Responsible - We are accountable for our work, our attitude, and our actions. We make Barge better. Excellence - We go all in and expect more of ourselves than others expect of us. Service - We are humble. We use our gifts in service of others. We believe that if we are living out our purpose for being in business and integrating our values into everything we do, we will ultimately achieve our vision to be the firm best known for being selected when it matters most. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status or on the basis of disability. Equal Opportunity Employer/Veterans/Disabled

JOB SUMMARY Reports To: Engineering Manager The Integration Engineer position is comprised of handling the technical design and configuration effort for multiple projects and service calls active within our organization.ESSENTIAL FUNCTIONS I. Ability to handle the implementation of plant automation using our in-house integration methods and vendor supplied hardware and software. 2. Interacts with our customers to meet the needs of the project or service call. 3. Interacts with our sales staff to be sure the requirements of the project are understood. 4. Ability to interact with our customers after the project or service call is completed in order to support post project issues. 5. Ability to work as a functioning team member to support large projects.ADDITIONAL RESPONSIBILITIES 1. Sales: a. Occasionally supports the sales staff by reviewing sales proposal prior to a presentation to the customer. b. Occasionally supports the sales staff by acting as the technical consultant for potential projects.2. Engineering: a. Acting as a team member for the engineering group for some of the larger projects. b. Acting as a project manager for some of the smaller projects.3. Administrative a. Completes the associated ISO paperwork for projects and service calls on a monthly basis b. Enters their time in the engineering database on a weekly basis.EDUCATION & EXPERIENCE I. A four year engineering degree or equivalent related experience is required. 2. Must have plant process control experience 3. Must be familiar with Programmable Logic Controllers, Distributed Control Systems and various SCADA packages.REQUIRED COMPETENCIES Knowledge Required 1. Programming experience for process related applications including: reactors, distillation, combustion controls, batch applications, mixing and metering, continuous and batch chemical production. 2. Platform programming experience with any of the following: Siemens PCS7. S7 and drives Rockwell ControlLogix, Plant PAX and FactoryTalk Emerson DeltaV Yokogawa Centum Honeywell Experion3. Experience writing technical specifications and design documents 4. Fluent Mathematical skills and problem solving expertise needed. 5. Fluent PC/Computer skills including Internet based tools, Outlook, MS Word, Excel, and PowerPoint. 6. Fluent Ethernet/ Networking skills desired. 7. Excellent verbal and written communication skills 8. Demonstrated ability to implement technical solutions tailored to a specific projectSpecific Attributes 1. Customer Focus ~ Excellent interpersonal skills at all levels of customer contact. 2. instills Trust - High level of integrity and understanding of business ethics. 3. Communicates Effectively - Excellent listening skills. 4. Action Oriented - Self-motivated; able to work independently with minimal supervision. 5. Drives Results - Good decision making and problem solving skills; analytical. 6. Plans and Aligns - Good organizational skills. 7. Resourcefulness - Innovative, open-minded, resourceful. 8. Manages Conflict - Handles stressful situations well; adapt readily; courageous spirit. 9. Collaborates - Functions cooperatively in a team environment. 10. Nimble Learning - Integrates new information quickly.PHYSICAL & MENTAL REQUIREMENTS 1. The work environment varies from typical office environment to plant site environment 2. Travel typically varies from 20% to 50% depending on work assignments 3. Individuals may need to sit or stand as needed. Requires walking primarily on a level surface for varying periods throughout the day in the plant site area. Could involve long periods of Computer work. 4. Able to lift or carry up to 40 lbs. 5. Posturalactivities include climbing, maneuvering, bending, stooping, kneeling. Crouching, crawling above, under and around machinery, equipment and occasionally includes reaching, handling, touching grasping machine parts, controls, control panels, levers, and switches as needed. 6. Ability to climb ladders, stairs, platforms and scaffolding to diagnose/troubleshoot process and equipment occasionally. 7. Ability to work in non-permit required spaces and at heights of 15' to 20'. 8. Physical effort required, continuous mental and visual attention required 9. While working in the plant site environment will be supporting 7 day a week operation; may require working 10. The performance of this position includes exposure to the manufacturing areas where certain areas require the use of personal protective equipment (PPE) such as Safety Glasses with Side Shields and Hearing Protection. Primary environment: ambient room temperatures, lighting and traditional office equipment as found in a typical office environment. Required to be able to read documents and computer screens.

Job DescriptionEngineer III, Embedded (Electrical with focus on Software)Franklin, MA / Chemical Analysis DivisionHow you will make an impact:As an Engineer at Thermo Fisher Scientific, you will join the new product and technology development team within our R&D department. We are a group of dedicated scientists and engineers working to design, implement, test, and validate innovative instruments used in measuring trace contaminants in ambient air and process gas streams. The successful candidate will have a clear understanding of electronic instrumentation, data collection and hardware control systems, and will also appreciate how on-line analyzers can drive our customers' efforts to improve environmental quality and process efficiency!What you will do:Collaborate with a multidisciplinary team of engineers and scientists to design and test instrumentation used in detection and measurement of air pollution and for analysis of process gases.Work with a variety of measurement platforms based on optical spectroscopy, chemiluminescence, fluorescence, mass spectrometry and other technologies.Contribute to design of electrical and software system architecture.Collect and analyze laboratory test data, refine product designs, and participate in field evaluations of our new products.How will you get here?EducationA Bachelor's or Master's degree in Electrical, Computer or Systems Engineering, or in a related field with a focus on instrumentation and embedded systems is required.ExperienceThree years of related research and development experience with a Bachelor's degree, or one year of experience with a Master's degree.Experience with embedded processors or commercially available micro control units, such as Arduino.Experience using computer-based data acquisition and test systems, such National Instruments DAQ modules, for data collection and hardware control.Experience using Python and/or high-level programming tools such as LabView, Mathematica, or MATLAB for automated data collection and analysis.Hands on experience using test equipment, like oscilloscopes and function generators.Experience working with C++ would be beneficial.Classroom training or experience in analytical chemistry, chemometrics or statistics will be helpful, but is not required.A positive demeanor, excellent communication and problem-solving skills are required.Our Mission is to enable our customers to make the world healthier, cleaner and safer. Watch as our colleagues explain 5 reasons to work with us. As one team of 100,000+ colleagues, we share a common set of values - Integrity, Intensity, Innovation and Involvement - working together to accelerate research, solve complex scientific challenges and drive technological innovation.Apply today! http://jobs.thermofisher.comThermo Fisher Scientific is an EEO/Affirmative Action Employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability or any other legally protected status.Accessibility/Disability AccessJob Seekers with a Disability: Thermo Fisher Scientific offers accessibility service for job seekers requiring accommodations in the job application process. For example, this may include individuals requiring assistance because of hearing, vision, mobility, or cognitive impairments. If you are a job seeker with a disability, or assisting a person with a disability, and require accessibility assistance or an accommodation to apply for one of our jobs, please submit a request by telephone at 1-855-471-2255*. Please include your contact information and specific details about your required accommodation to support you during the job application process.This telephone line is reserved solely for job seekers with disabilities requiring accessibility assistance or an accommodation in the job application process. Messages left for other purposes, such as not being able to get into the career website, following up on an application, or other non-disability related technical issues will not receive a response.

Job Title Building Engineer Job Description Summary Responsible to ensure the efficient operation and maintenance of mechanical, electrical and plumbing equipment and systems for the assigned property(s). Responsibilities include (but are not limited to) maintaining a clean and safe working environment, performing rounds, conducting routine assessments, performance of day-to-day preventive and corrective maintenance, painting, and housekeeping for assigned properties Job Description ESSENTIAL FUNCTIONS AND RESPONSIBILITIES• Perform all plumbing, electrical, or HVAC requirements of the building(s)• Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc.• Monitor and adjust all mechanical/pneumatic equipment, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings• Verify field conditions and perform any necessary repairs or adjustments• Monitor Energy Management• Repair doors, ceilings, hand railings, and floors and other general repairs, adjustments and installations about the property• Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories, etc.)• Perform preventive maintenance duties in accordance with C&W standards, building protocol, manufacturer recommendations and industry best practices. including changing filters, cleaning coils, flushing condensers, punching tubes, greasing fan, pump and motor bearings as required, inspecting and adjusting belts, replacing motor bearings, aligning pulleys and shafts, monitor condenser, chilled, heating and secondary water chemical treatment and its associated feed equipment, clean and maintain cooling towers, and perform annual inspections and other scheduled routines as directed.• Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps. Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of obstructions and debris• Check for properly operating emergency exit signs and lights and ensure free and clear access to emergency stairs and exits. Perform additional fire and life safety inspections as per NFPA and local jurisdiction, C&W standards, building protocol and as directed by superiors and property management• Document and report activities to supervisor• Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns• Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits• Complete all required C&W Safety Training as scheduled annually• Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hoursKEY COMPETENCIES• Technical Proficiency• Initiative• Flexibility• Multi-Tasking• Sense of UrgencyIMPORTANT EDUCATION• High School Diploma of GED Equivalent• Graduate of apprentice program or trade school preferredIMPORTANT EXPERIENCE• 5+ years of related work experience in operating mechanical, electrical, and plumbing systems in a commercial property settingADDITIONAL ELIGIBILITY QUALIFICATIONS• Appropriate license/permit for trade as may be required, i.e. Journeyman or Master Electrician License or City Licenses, such as Refrigeration Certificate of Fitness, High Pressure Boiler License, High Pressure Steam Operator, etc.)• May be required to have certification as a Universal Technician for CFC's depending on market licensure requirements• Possess and maintain a valid driver's license and good driving record with periodic checks (where applicable)• Basic Computing Skills in Outlook, Excel & Word• Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc.• Knowledgeable in energy management systems, techniques and operations.• Thorough knowledge in all building systems operations, maintenance and repair.May be only maintenance staff member on duty during certain shifts; may be required to work extended periods of time without relief when responding to priority/emergency situations (including overtime type assignments); may require shift work and/or on call dutiesWORK ENVIRONMENTThis job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Regularly required to travel outside between properties in varying weather conditions.PHYSICAL DEMANDSThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.• Must have ability to stoop, stand, climb, frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices• Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine• Involves movement between departments, floors, and properties to facilitate work• Ability to speak clearly so others can understand you• Ability to read and understand information presented orally and in writing• Regularly required to utilize vision abilities, allowing reading of printed material, drawings, and schematicsAAP/EEO STATEMENTC&W provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Further, the company takes affirmative action to ensure that applicants are employed and employees during employment are treated without regard to any of these characteristics. Discrimination of any type will not be tolerated.OTHER DUTIESThis job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice.Cushman & Wakefield provides equal employment opportunity. Discrimination of any type will not be tolerated. Cushman & Wakefield is an Equal Opportunity / Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or any other characteristic protected by state, federal, or local law.In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or email [email protected] . Please refer to the job title and job location when you contact us.

Our carefully selected team is what sets us apart from other firms. We are driven to provide the best environment for our employees - latest technology, thorough training, easy access to leadership, and a comprehensive benefit package that is sure to impress. We empower our employees to strike a total life balance by offering flexible schedules and hybrid work arrangements. Clients and partners regard us as innovators who are always pushing for creative and comprehensive solutions that optimize the bottom line, and a passion for genuine client service. We are seeking a Senior Mechanical/Process Engineer with expertise and experience in consulting for a wide variety of manufacturing clients and industrial sectors. The candidate will provide technical expertise on behalf of the firm related to mechanical/process engineering of industrial and manufacturing facilities and shall be able to demonstrate the ability to lead clients through the feasibility, programming and planning stages of projects, continuing through the development of process flow diagrams and final engineering design. This position requires familiarity with the system design and hook-up of equipment similar to that associated with scrubbers, dust collection systems, chemical tank farms, compressed gasses, industrial heat exchangers, large pumping systems, cooling towers, hot oil boilers, large compressed air plants, and other similar systems. Responsibilities: Conceptualize the initial mechanical design approach for major phases of large industrial projects through installation, with an emphasis on specifying equipment, calculating loads, ductwork and pipe sizing, selection of equipment such as pumps, boilers, chillers, cooling towers, heat exchangers, dust collectors, and air washer units. Prepare engineering reports, plans and specifications for industrial projects. Design and produce engineering drawings and instructions based on calculations. Interpret and revise engineering drawings. Conceive, plan, and conduct research in complex problem areas. Prepare plans and technical specifications, contract documents and estimates. Participate in contract bidding and administration. Supervise and observe the design/installation and ongoing progress of a project, including the coordination of the project with City, State and County officials and other outside agencies. Lead the coordination of projects with clients, contractors, outside consultants and firm staff. Communicate and interact with project team members, client representatives, review agencies and others as appropriate to project. Lead in conceiving, planning and conducting research to resolve a variety of complex problems (e.g., conflicting design requirements, unsuitability of conventional materials, difficult coordination requirements). Must have a good understanding of codes and standards applicable to industrial design including but not limited to: ASHRAE, ASME, NFPA, and the IBC code set. Check and approve shop drawings. Able to devise innovative solutions to unusual engineering problems. Have excellent verbal and written communication skills. Proficient at the interpretation and creation of PFDs, P&IDs, and UFDs (Utility Flow Diagrams). Minimum Qualifications:Bachelor's degree in Mechanical, Industrial, or Chemical Engineering. Minimum of 12 years in mechanical/process design and engineering with a consulting firm for Industrial/Manufacturing/Process facility projects including but not limited to the following industries: food and beverage, battery manufacturing, energy storage, automotive, metals, etc. Professional Engineer licensure (P.E.) is required. Ability to multi-task and manage multiple projects simultaneously. Strong team player with great communication and presentation skills. Ability to travel if needed to client meetings and project sites. Valid Driver's License to travel to job sites. Gresham Smith is committed to a diverse and inclusive workplace. Gresham Smith provides equal employment opportunities to applicants and employees and does not discriminate on the basis of age, race, color, ancestry, religion, sex, sexual orientation, gender identity or expression, transgender, national origin, status as a protected veteran, disability or any other classification protected by law. Gresham Smith will not accept unsolicited resumes from recruiters, headhunters, contract recruiters, search firms, or employment agencies. An executed GRESHAM PLACEMENT SERVICES AGREEMENT (PSA) is required prior to any payment obligation for either a referral or recruiter fee. In the event a recruiter or agency submits a resume or candidate without a previously executed PSA, GRESHAM SMITH explicitly reserves the right to recruit and hire those candidate(s) at its discretion, and without any financial obligation whatsoever to the recruiter or agency. Any such unsolicited resume or candidate contact information, including those submitted directly to GRESHAM SMITH'S hiring managers or any other employee, shall become the property of GRESHAM SMITH upon receipt.

MW/MB is a joint venture between IKO and TAMKO, two of the world's leading manufacturers of roofing products. We produce fiberglass wet chop at our Clarksville, TN facility that is used in the production of various IKO and TAMKO roofing products, including composite shingles for homes. We will soon celebrate our 20th anniversary.Clarksville is a vibrant and growing community located only 45 minutes from Nashville. Enjoy a lower cost of living, no state income taxes, and a company that truly believes in a work/life balance.Furnace Engineer Functions:Responsible for all aspects of the assigned manufacturing processes, including batch and furnace, as well as safety, value (productivity) and quality.Maximizes furnace life through inspections, repairs, and maintenance as well as proper operational control (temperature, pressure, etc.).Leads and manages furnace cold repair and rebuild efforts at appropriate intervals.Orders and inventories supplies needed to maintain furnace and forehearth area.Trains, develops and works with furnace techs to ensure stable and consistent furnace operations.Trials new raw materials and gathers data to support or disprove merit.Monitors the condition of all equipment in the batch, furnace and forehearth area and initiate necessary repairs needed to meet performance and production goals.Ensure melting temperature profile is maintained in the furnace and forehearth as well as all other important process parameters to ensure high glass quality and high fiber forming efficiencies.Maintain and troubleshoot system from batch truck and rail unloading, batch mixing, transporting and charging through the furnace and forehearth.Maintain proper gas to oxygen ratios in the furnace and forehearths.Keeps and inputs all batch formulas. Verifies calibration on batch weighing system.Profiles and cleans gas/oxy burners and forehearth pencil burners.Operate, calibrate and maintain electric boost system.Opacity reading qualified.Beneficial Experience and Skills:Working knowledge of SPC and six sigma methodology.Working knowledge of Wonderware, Noltec, North American, and Eclipse systems.Excellent communication skills, verbal and written.Working knowledge of Microsoft Windows and Office products.Education RequirementsA bachelor's degree in ceramic, mechanical, or chemical engineering is preferred along with ten-years minimum furnace and manufacturing experience.

EXPERIENCE: BS Chem E or related with 5-10 years from The Food, Grain or Chemical Process Industries where unit operations are applied. Desired skill set include Centrifugation, Spray dray drying, and Six Sigma. Looking for a candidate with examples of process improvement in a plant setting.The Production Engineer (mid-career level) uses a deep understanding of the unit operating procedures and processes to provide analysis, give instruction, plan, compile information, and work collaboratively with others to meet daily production plans. The Production Engineer draws upon significant knowledge of the unit processes and equipment to make business-based decisions. Has responsibility for assessing the quality, robustness, and capability of the process and making decisions, with others, to halt or modify production as needed if the process does not meet quality and/or safety standards. The incumbent must be able to interact effectively with plant personnel at all levels to influence desired outcomes.Responsibilities: Typical duties of the job include but are not limited to:• Lead unit activities to meet Safety Health Environmental, Quality / Food Safety, Cost, and Production goals. • Provide technical support for specific manufacturing unit(s) including monitoring performance metrics, monitoring OEE data, troubleshooting, and investigating product quality problems• Manage unit Process Safety Management (PSM) aspects including Management of Change (MOC) and Pre-startup Safety Review (PSSR) processes as needed.• Lead and/or participate in incident investigations using Root Cause Failure Analysis (RCFA) and/or other tools.• Provide Unit subject matter expertise/process knowledge to all functions (e.g., Maintenance, Manufacturing Technology, Quality, etc.) • Coordinate Unit maintenance activities utilizing the Work Management Process (WMP) and in collaboration with the Maintenance Coordinator and Maintenance staff.• Coordinate and communicate Unit daily activities including the issuance of the Unit's "Daily Plan"• Provide expertise in starting up and shutting down the plant for planned and unplanned circumstances.• Assist the Unit Manager in developing plans to ensure cost-effective use of assets.• Use Six Sigma or other defect elimination tools and lean tools to find solutions.• Provide coaching & counseling for FLS and Co-Ops. Mentor other professionals who support production areas through teaching and communicating to improve the organization's skills to meet business needs.• Establish effective communications systems throughout the unit focused on sharing information and engaging employees in the success of the facility.• Perform job duties in a manner that follows food safety and quality guidelines including but not limited to HACCP, GMPs, QA Policies, Sanitation, and Pest Control.• Other duties that may be required due to dynamic changes in business focus.Job requirements:• Chemical or mechanical engineering degree and 5 years or greater of experience in an industrial environment and/or process engineering role. • Demonstrated ability to collect and analyze data, identify solutions, assess risk factors, and make sound business decisions.• Familiar with Process Safety Management practices including MOC and PSSR.• Demonstrated ability to lead teams and role model strong safety standards.• Demonstrated effective oral and written communication skills.• Must be able to use Microsoft applications (WORD, EXCEL, POWERPOINT, etc.) and be able to learn other computer systems/databases. Preferred skills and experience include:• Demonstrated knowledge of solids drying technologies, wastewater pH control, wastewater solids processing• Experience with capital project management (development through execution)• Familiar with environmental regulatory reporting.• Familiar with Work Management Process and maintenance best practices.• Familiar with Root Cause Failure Analysis (RCFA)• Demonstrated ability to use key computer-based tools including SAP, SharePoint, ETQ Reliance, Lotus Notes• Six Sigma Certification, Lean Manufacturing Methodology, and Continuous Improvement Knowledge.Preferred:5 plus years' experience in a food manufacturing or chemical environment.Chemical Engineering degree strongly preferred.Desire to grow and lead in a plant environment.

Job Description:Project EngineerCollaborate with Innovative 3Mers Around the WorldChoosing where to start and grow your career has a major impact on your professional and personal life, so it’s equally important you know that the company that you choose to work at, and its leaders, will support and guide you. With a diversity of people, global locations, technologies and products, 3M is a place where you can collaborate with other curious, creative 3Mers.This position provides an opportunity to transition from other private, public, government or military experience to a 3M career.The Impact You’ll Make in this Role As a Project Engineer, you will have the opportunity to tap into your curiosity and collaborate with some of the most innovative and diverse people around the world. Here, you will make an impact by:Coordinating project timelines, budgets, construction activity, and personnel to successfully complete assigned projectsDefining and executing competitive bidding strategySpecifying equipment performance and design criteriaMaintaining effective communication with project team, staff, and project ownersEstablishing accountability through understanding applicable codes and guidelines to ensure designs meet codes, guidelines, and standardsYour Skills and Expertise   To set you up for success in this role from day one, 3M requires (at a minimum) the following qualifications:Bachelor’s degree or higher (completed and verified prior to start) from an accredited institutionOne (1) year of combined experience in project management in a private, public, government or military environment.Current, valid Driver’s License. Additional qualifications that could help you succeed even further in this role include:Possess expertise equivalent to that which would be obtained in a bachelor’s degree or higher in chemical, mechanical, or electrical engineeringPrior experience with webline, extrusion, material handling, automation or inspection equipmentWork location: Knoxville, IATravel: May include up to 20% domesticRelocation Assistance: May be authorized. Must be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status).Supporting Your Well-being 3M offers many programs to help you live your best life – both physically and financially. To ensure competitive pay and benefits, 3M regularly benchmarks with other companies that are comparable in size and scope. Chat with MaxFor assistance with searching through our current job openings or for more information about all things 3M, visit Max, our virtual recruiting assistant on 3M.com/careers. Applicable to US Applicants Only:The expected compensation range for this position is $95,825 - $117,120, which includes base pay plus variable incentive pay, if eligible. This range represents a good faith estimate for this position. The specific compensation offered to a candidate may vary based on factors including, but not limited to, the candidate’s relevant knowledge, training, skills, work location, and/or experience. In addition, this position may be eligible for a range of benefits (e.g., Medical, Dental & Vision, Health Savings Accounts, Health Care & Dependent Care Flexible Spending Accounts, Disability Benefits, Life Insurance, Voluntary Benefits, Paid Absences and Retirement Benefits, etc.). Additional information is available at: https://www.3m.com/3M/en_US/careers-us/working-at-3m/benefits/.Learn more about 3M’s creative solutions to the world’s problems at www.3M.com or on Twitter @3M.Responsibilities of this position include that corporate policies, procedures and security standards are complied with while performing assigned duties.Our approach to flexibility is called Work Your Way, which puts employees first and drives well-being in ways that enable 3M’s business and performance goals. You have flexibility in where and when work gets done. It all depends on where and when you can do your best work.Pay & Benefits Overview: https://www.3m.com/3M/en_US/careers-us/working-at-3m/benefits/3M is an equal opportunity employer.  3M  will not discriminate against any applicant for employment on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status.Please note: your application may not be considered if you do not provide your education and work history, either by: 1) uploading a resume, or 2) entering the information into the application fields directly.3M Global Terms of Use and Privacy StatementCarefully read these Terms of Use before using this website. Your access to and use of this website and application for a job at 3M are conditioned on your acceptance and compliance with these terms.Please access the linked document by clicking here, select the country where you are applying for employment, and review. Before submitting your application, you will be asked to confirm your agreement with the terms.

Experience: BS ChemE ME or related with 2-10 years experience from most any process industry. Examples of Process Improvement with six sigma and PSM being desired skill setsBelow is clients description and requirements2 MT ( Manufacturing and Technology) Engineer opportunities at the Memphis, Tennessee manufacturing facility. Memphis, TN, known as the "Bluff City" and "Birthplace of Rock 'n' Rock," is located in the southwest corner of TN along the Mississippi river. Memphis provides its residents fantastic music, arguably the best barbeque, and a relaxed pace of life. The Memphis area also offers great suburban living options with Bartlett, Cordova, Germantown, and Collierville TN and Southaven and Olive Branch MS as commuting options and some of the best school districts in the state. Tennessee sets itself apart from many other states by not imposing a state income tax.These roles provide technical engineering services and will work closely with the Site Manufacturing Technology Leader, Site Engineering, Process R&D, and the Capital Engineering team to support day-to-day operation, process safety management, capital project business justification, design, installation, productivity improvement, and new product scale-up in operation sites. Job requirements. Engineer I:Bachelor's degree or higher in engineering, preferably Electrical or Chemical Engineering or Food Science & Engineering.2 - 5 years of working experience in an engineering or manufacturing environment. (10+ years preferred). Engineer II: Bachelor's degree or higher in engineering, preferably Electrical or Chemical Engineering or Food Science & Engineering.5+ years of working experience in an engineering or manufacturing environment. (10+ years preferred). A preferred candidate will have demonstrated knowledge and experience in Hygienic Design, Process Safety Management, liquid-solid separations, spray drying, packaging, statistical analysis, process design capability, and Six Sigma.Ability to work independently with excellent time management and judgment in prioritization of skills.Interpersonal and communication (written and verbal) skills to engage teams and align stakeholders in a matrixed organization.Strong knowledge and experience in process safety management. Ability to travel