Equipment Engineer Salary in New York, NY

Job Title Operating Engineer Job Description Summary Responsible to ensure the efficient operation and maintenance of mechanical, electrical and plumbing equipment and systems for the assigned property(s). Responsibilities include (but are not limited to) maintaining a clean and safe working environment, performing rounds, conducting routine assessments, performance of day-to-day preventive and corrective maintenance, painting, and housekeeping for assigned properties Job Description ESSENTIAL FUNCTIONS AND RESPONSIBILITIES• Perform all plumbing, electrical, or HVAC requirements of the building(s)• Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc.• Monitor and adjust all mechanical/pneumatic equipment, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings• Verify field conditions and perform any necessary repairs or adjustments• Monitor Energy Management• Repair doors, ceilings, hand railings, and floors and other general repairs, adjustments and installations about the property• Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories, etc.)• Perform preventive maintenance duties in accordance with C&W standards, building protocol, manufacturer recommendations and industry best practices. including changing filters, cleaning coils, flushing condensers, punching tubes, greasing fan, pump and motor bearings as required, inspecting and adjusting belts, replacing motor bearings, aligning pulleys and shafts, monitor condenser, chilled, heating and secondary water chemical treatment and its associated feed equipment, clean and maintain cooling towers, and perform annual inspections and other scheduled routines as directed.• Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps. Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of obstructions and debris• Check for properly operating emergency exit signs and lights and ensure free and clear access to emergency stairs and exits. Perform additional fire and life safety inspections as per NFPA and local jurisdiction, C&W standards, building protocol and as directed by superiors and property management• Document and report activities to supervisor• Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns• Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits• Complete all required C&W Safety Training as scheduled annually• Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hoursKEY COMPETENCIES• Technical Proficiency• Initiative• Flexibility• Multi-Tasking• Sense of UrgencyIMPORTANT EDUCATION• High School Diploma of GED Equivalent• Graduate of apprentice program or trade school preferredIMPORTANT EXPERIENCE• 5+ years of related work experience in operating mechanical, electrical, and plumbing systems in a commercial property settingADDITIONAL ELIGIBILITY QUALIFICATIONS• Appropriate license/permit for trade as may be required, i.e. Journeyman or Master Electrician License or City Licenses, such as Refrigeration Certificate of Fitness, High Pressure Boiler License, High Pressure Steam Operator, etc.)• May be required to have certification as a Universal Technician for CFC's depending on market licensure requirements• Possess and maintain a valid driver's license and good driving record with periodic checks (where applicable)• Basic Computing Skills in Outlook, Excel & Word• Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc.• Knowledgeable in energy management systems, techniques and operations.• Thorough knowledge in all building systems operations, maintenance and repair.May be only maintenance staff member on duty during certain shifts; may be required to work extended periods of time without relief when responding to priority/emergency situations (including overtime type assignments); may require shift work and/or on call dutiesWORK ENVIRONMENTThis job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Regularly required to travel outside between properties in varying weather conditions.PHYSICAL DEMANDSThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.• Must have ability to stoop, stand, climb, frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices• Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine• Involves movement between departments, floors, and properties to facilitate work• Ability to speak clearly so others can understand you• Ability to read and understand information presented orally and in writing• Regularly required to utilize vision abilities, allowing reading of printed material, drawings, and schematicsAAP/EEO STATEMENTC&W provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Further, the company takes affirmative action to ensure that applicants are employed and employees during employment are treated without regard to any of these characteristics. Discrimination of any type will not be tolerated.OTHER DUTIESThis job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice.Cushman & Wakefield also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health, vision, and dental insurance, flexible spending accounts, health savings accounts, retirement savings plans, life, and disability insurance programs, and paid and unpaid time away from work. In addition to a comprehensive benefits package, Cushman and Wakefield provide eligible employees with competitive pay, which may vary depending on eligibility factors such as geographic location, date of hire, total hours worked, job type, business line, and applicability of collective bargaining agreements.The compensation that will be offered to the successful candidate will depend on factors such as whether the position is covered by a collective bargaining agreement, the geographic area in which the work will be performed, market pay rates in that area, and the candidate's experience and qualifications.The company will not pay less than minimum wage for this role.The compensation for the position is: $42.01 - $49.96Cushman & Wakefield provides equal employment opportunity. Discrimination of any type will not be tolerated. Cushman & Wakefield is an Equal Opportunity / Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or any other characteristic protected by state, federal, or local law.In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or email [email protected] . Please refer to the job title and job location when you contact us.

Job Title Chief Engineer (Union) Job Description Summary Chief Engineer is responsible for the effective daily leadership of his/her staff, managing the engineering program to the highest level of quality work and customer service as well as the administration of the engineering department in alignment with the management team, the C&W engineering platform, and client expectations. The Chief Engineer will perform at the highest of ethical standards, reflecting the core values of C&W as defined in its Business Code of Conduct, Policies and Procedures Manual, and other related company policies. Responsible to plan, implement, coordinate, and supervise all mechanical operations, maintenance, communications, energy management, and manpower development programs for assigned properties. The Chief Engineer may be required to perform limited hands on operational duties and is not precluded from performing Watch Activity Job Description ESSENTIAL FUNCTIONS AND RESPONSIBILITIES• Supervise engineers and maintenance staff including hiring, training, personnel development, etc.• Ensure performance management, coaching, and development of team members through established HR processes and disciplinary actions.• Participate and coordinate annual scheduling and execution of the C&W Safety Program as directed by Asset Services/GOS, Engineering Leadership, EH&S Administration, and so forth. Responsible for 100% Compliance at his/her site.• Manage operational accounts for building, including variance reporting, as required and assist in development of operating and capital budgets• Utility Management such as tracking use, consumption, cost, reporting, comparison models, sub-metering, budgeting, variances as directed by Management and/or Leadership.• Conduct regular inspections of building systems and equipment; identify and resolve issues.• Assist in maintenance/engineering issues as required• Recommend and implement improvements for preventive maintenance programs on an ongoing basis.• Develop, implement, and maintain an effective preventive and predictive maintenance program for task scheduling, routines, and performance. Program to include procedures for annual, semi-annual, quarterly, monthly and other scheduled maintenance as provided by the manufacturer's recommendations and/or industry best practices.• Develop and maintain effective building-specific maintenance and safety procedure manuals and train building personnel• Coordinate development of and/or maintain an Operations Document Library, including but not limited to construction plans, structural plans, as-built drawings, MEP schedules, line diagrams and schematics, equipment and operation manuals, start up and commissioning documents, and equipment warranties.• Formulate and conduct building-related systems and equipment training.• Coordinate maintenance efforts with outside contractors, tenant finish personnel, and engineers.• Oversee all building systems including fire/life safety, plumbing, HVAC, and electrical issues; must remain current with latest HVAC technology trends.• Maintain ongoing communication with tenants, clients, property management, and vendors• Develop specifications and assist in solicitation, administration, execution and performance of maintenance/ repair service contracts.• May assist in solicitation and acquisition of new management contracts• Respond to all emergency situations quickly (fire, evacuation, equipment failure etc.) and customer concerns• Implement and administer inventory control programs, purchase parts and supplies.• Ensure compliance with applicable codes, requisitions, government agency, and company directives as relates to building operations.• Support the Property or Facility Manager with rehabilitation projects such as replacement of HVAC systems, installation of new roofs, plumbing repairs and alterations to other Building Systems. Support Property or Facility Manager on all items listed below (1-10):• Prepare and present feasibility studies.• Prepare budget estimates.• Prepare schedule and manage its progress.• Prepare contract documents reflecting scope of work.• Manage the bidding process.• Prepare and expedite approval of all internal control documents• Monitor the construction process to assure compliance with contract documents.• Coordinate all work with user and Internal Support Groups.• Maintain complete project files recording progress, approvals, financial data and contracts• Perform final inspections, punch list exceptions, and expedite corrective actionDuties are inclusive of approximately 50% operating engineer responsibilities;May be only maintenance staff member on duty during certain shifts; may require shift work and/or on-call or stand-by dutiesKEY COMPETENCIES• Communication Proficiency (oral and written)• Interpersonal Skills• Organization Skills• Technical Proficiency• LeadershipIMPORTANT EDUCATION• High School Diploma or GED EquivalentIMPORTANT EXPERIENCE• 7+ years of related work experience in a commercial property setting or any similar combination of education or experience in the operation, installation and maintenance of building systems with in depth technical understanding and knowledge of all HVAC, electrical, plumbing, fire/life safety, and control systems.ADDITIONAL ELIGIBILITY QUALIFICATIONS• Vocational/Technical training certificate• Appropriate license/permit for trade as may be required, i.e. Journeyman or Master Electrician License or City Licenses• Universal Technician for CFC's depending on market licensure requirements• Financial knowledge necessary for reading and understanding budgets, budget variances and basic reporting as required by management• Familiar with Energy Management System (EMS)/programming and fire alarm systems• Basic Computing Skills in Outlook, Excel & Word• Working knowledge of all aspects of building systems and operations, contractual maintenance, construction and related services, and local laws and building codes pertaining to building operations and safetyWORK ENVIRONMENTThis job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Regularly required to travel outside between properties in varying weather conditions.PHYSICAL DEMANDSThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.• Must have ability to stoop, stand, climb, frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices• Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine• Involves movement between departments, floors, and properties to facilitate work• Ability to speak clearly so others can understand you• Ability to read and understand information presented orally and in writing• Regularly required to utilize vision abilities, allowing reading of printed material, drawings, and schematicsAAP/EEO STATEMENTC&W provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Further, the company takes affirmative action to ensure that applicants are employed and employees during employment are treated without regard to any of these characteristics. Discrimination of any type will not be tolerated.OTHER DUTIESThis job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice.Cushman & Wakefield also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health, vision, and dental insurance, flexible spending accounts, health savings accounts, retirement savings plans, life, and disability insurance programs, and paid and unpaid time away from work. In addition to a comprehensive benefits package, Cushman and Wakefield provide eligible employees with competitive pay, which may vary depending on eligibility factors such as geographic location, date of hire, total hours worked, job type, business line, and applicability of collective bargaining agreements.The compensation that will be offered to the successful candidate will depend on factors such as whether the position is covered by a collective bargaining agreement, the geographic area in which the work will be performed, market pay rates in that area, and the candidate's experience and qualifications.The company will not pay less than minimum wage for this role.The compensation for the position is: $17.00 - $60.00Cushman & Wakefield provides equal employment opportunity. Discrimination of any type will not be tolerated. Cushman & Wakefield is an Equal Opportunity / Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or any other characteristic protected by state, federal, or local law.In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or email [email protected] . Please refer to the job title and job location when you contact us.

RESPONSIBILITIES:Kforce has a client that is seeking a Broadcast Engineer in New York, NY.Responsibilities: Broadcast Engineer will perform preventive and routine maintenance on all systems Plan and execute software updates on equipment Design, test, and integrate equipment Maintain documentation Assist Operations and Production in assessing improvements and technical responsibilities (camera shading, level setting, Intercom programming, etc.) Coordinate with Networking and IT on service requests as requested Monitor HVAC and Power, and alert vendors of critical issues As a Broadcast Engineer, you will perform configuration changes and test in preparation for Special Events Work with Technical managers on performing preparations of Studio, and Control Room for Production, including checking operation of lights, camera, mic's, IFB Maintain facility compliance with standard Broadcasting Practices and standardsREQUIREMENTS: Bachelor's degree preferred, but not required 3 or more years of Broadcasting experience in a Live news operation or equivalent -event- driven environment Proven knowledge of Broadcasting Audio and Video standards Proven knowledge of A/V and networking signal flow Experience with Dante, SDI, NDI, Networking, ENPS and OnCue Prompters Experience in the setup of Newtek TriCaster, Berringer Wing, conventional Analog Audio Gear Experience and knowledge of Multimedia file format and CODEC's Ability to maintain composure during high stress situations, required Flexibility in scheduling; Occasional evenings and weekends will be required Availability to work holidays Experience with Clearcom Eclipse a plus The pay range is the lowest to highest compensation we reasonably in good faith believe we would pay at posting for this role. We may ultimately pay more or less than this range. Employee pay is based on factors like relevant education, qualifications, certifications, experience, skills, seniority, location, performance, union contract and business needs. This range may be modified in the future. We offer comprehensive benefits including medical/dental/vision insurance, HSA, FSA, 401(k), and life, disability & ADD insurance to eligible employees. Salaried personnel receive paid time off. Hourly employees are not eligible for paid time off unless required by law. Hourly employees on a Service Contract Act project are eligible for paid sick leave. Note: Pay is not considered compensation until it is earned, vested and determinable. The amount and availability of any compensation remains in Kforce's sole discretion unless and until paid and may be modified in its discretion consistent with the law. This job is not eligible for bonuses, incentives or commissions. Kforce is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Job Title Engineer (94) Job Description Summary Responsible to ensure the efficient operation and maintenance of mechanical, electrical and plumbing equipment and systems for the assigned property(s). Responsibilities include (but are not limited to) maintaining a clean and safe working environment, performing rounds, conducting routine assessments, performance of day-to-day preventive and corrective maintenance, painting, and housekeeping for assigned properties Job Description ESSENTIAL FUNCTIONS AND RESPONSIBILITIES• Perform all plumbing, electrical, or HVAC requirements of the building(s)• Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc.• Monitor and adjust all mechanical/pneumatic equipment, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings• Verify field conditions and perform any necessary repairs or adjustments• Monitor Energy Management• Repair doors, ceilings, hand railings, and floors and other general repairs, adjustments and installations about the property• Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories, etc.)• Perform preventive maintenance duties in accordance with C&W standards, building protocol, manufacturer recommendations and industry best practices. including changing filters, cleaning coils, flushing condensers, punching tubes, greasing fan, pump and motor bearings as required, inspecting and adjusting belts, replacing motor bearings, aligning pulleys and shafts, monitor condenser, chilled, heating and secondary water chemical treatment and its associated feed equipment, clean and maintain cooling towers, and perform annual inspections and other scheduled routines as directed.• Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps. Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of obstructions and debris• Check for properly operating emergency exit signs and lights and ensure free and clear access to emergency stairs and exits. Perform additional fire and life safety inspections as per NFPA and local jurisdiction, C&W standards, building protocol and as directed by superiors and property management• Document and report activities to supervisor• Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns• Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits• Complete all required C&W Safety Training as scheduled annually• Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hoursKEY COMPETENCIES• Technical Proficiency• Initiative• Flexibility• Multi-Tasking• Sense of UrgencyIMPORTANT EDUCATION• High School Diploma of GED Equivalent• Graduate of apprentice program or trade school preferredIMPORTANT EXPERIENCE• 5+ years of related work experience in operating mechanical, electrical, and plumbing systems in a commercial property settingADDITIONAL ELIGIBILITY QUALIFICATIONS• Appropriate license/permit for trade as may be required, i.e. Journeyman or Master Electrician License or City Licenses, such as Refrigeration Certificate of Fitness, High Pressure Boiler License, High Pressure Steam Operator, etc.)• May be required to have certification as a Universal Technician for CFC's depending on market licensure requirements• Possess and maintain a valid driver's license and good driving record with periodic checks (where applicable)• Basic Computing Skills in Outlook, Excel & Word• Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc.• Knowledgeable in energy management systems, techniques and operations.• Thorough knowledge in all building systems operations, maintenance and repair.May be only maintenance staff member on duty during certain shifts; may be required to work extended periods of time without relief when responding to priority/emergency situations (including overtime type assignments); may require shift work and/or on call dutiesWORK ENVIRONMENTThis job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Regularly required to travel outside between properties in varying weather conditions.PHYSICAL DEMANDSThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.• Must have ability to stoop, stand, climb, frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices• Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine• Involves movement between departments, floors, and properties to facilitate work• Ability to speak clearly so others can understand you• Ability to read and understand information presented orally and in writing• Regularly required to utilize vision abilities, allowing reading of printed material, drawings, and schematicsAAP/EEO STATEMENTC&W provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Further, the company takes affirmative action to ensure that applicants are employed and employees during employment are treated without regard to any of these characteristics. Discrimination of any type will not be tolerated.OTHER DUTIESThis job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice.Cushman & Wakefield also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health, vision, and dental insurance, flexible spending accounts, health savings accounts, retirement savings plans, life, and disability insurance programs, and paid and unpaid time away from work. In addition to a comprehensive benefits package, Cushman and Wakefield provide eligible employees with competitive pay, which may vary depending on eligibility factors such as geographic location, date of hire, total hours worked, job type, business line, and applicability of collective bargaining agreements.The compensation that will be offered to the successful candidate will depend on factors such as whether the position is covered by a collective bargaining agreement, the geographic area in which the work will be performed, market pay rates in that area, and the candidate's experience and qualifications.The company will not pay less than minimum wage for this role.The compensation for the position is: $49.96 - $49.46Cushman & Wakefield provides equal employment opportunity. Discrimination of any type will not be tolerated. Cushman & Wakefield is an Equal Opportunity / Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or any other characteristic protected by state, federal, or local law.In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or email [email protected] . Please refer to the job title and job location when you contact us.

Location: REMOTESalary: $55.00 USD Hourly - $65.00 USD HourlyDescription: Remote The successful candidate will be responsible for the advanced configuration and operating system upgrades of carrier-class Cisco, Juniper and Nokia equipment that tie together a complex, multivendor nationwide data network. The Engineer will also be responsible for working on up-and-coming virtualization technologies in the Pacific and North Central Markets. They will assist with and perform implementation responsibilities for one or more COINs and work closely with the Implementation and Engineering teams to carry out our strategic technology goals and transition from VXLAN to the eNSE platform. This new network leverages virtualization and software defined networking to transform how we provide products and services while maintaining our position as the industry leader. Company is seeking a motivated and driven engineering professional who will assume responsibilities for engineering IP networking build projects and work closely with the Capacity Planning, Design and Operations teams to implement our strategic technology goals. • Work 3rd shift, 8-hours, 5-day work weeks (Monday-Friday mornings) • Plan, prioritize, and schedule maintenance window changes with many groups both inside and outside the office with minimum supervision during the daytime and then implement these changes during scheduled maintenance windows while adhering to corporate standards • You will need hands-on experience configuring routers, switches, and related network equipment. Preferably: Cisco Carrier Routing Systems (CRS), Cisco Network Convergence System (NCS), ASR 9K, ISR 3945, Nexus 3K, 7K, 9K, Juniper MX-480, MX-960. Operating Systems: IOS, XR-IOS, NX-OS, JunOS. Implement configuration changes for the directional Intelligent Edge Networks. These include but are not limited to: SAP eNSE fabric, Access eNSE fabric, EPC element migration to eNSE, ISP peering routers, VCP Edge connectivity, eNSE connectivity to MSE and UT • Leveraging automation tools like Python, NSO, DCNM, VTS, Pronghorn and Nuage to complete the above projects • Transport circuit turn up/troubleshooting • Turn up new and disconnect older circuits of varying bandwidths using procedures written by both an internal engineering group and outside vendors. The work is done in parallel with other internal groups • Work remotely with local operation team members throughout the United States to deploy and troubleshot newly installed racked routers and switches into Company data center locations. • Work independently with minimum supervision and meet aggressive deployment dates and timelines • Ability to quickly adapt and learn new tasks and processes around deploying new routers and switches in a remote setting • Engineering the network configuration for the onboarding of Company private cloud tenants • Solid understanding of Networking specific technologies: IPV6, L2VPN, L3VPN, OSPFv3, MPBGP, QOS/Traffic Engineering, MPLS (LDP & TDP) and VRFs • Perform BAU maintenance work such as ACL updates and software upgrades on border leafs, access leafs, and spines on the eNSE fabric • Utilize network monitoring tools, during maintenance windows, to ensure that all monitored network equipment is functioning in accordance with company standards and policies, both before and after changes are made • Be proficient with network configuration compare tools such as Ultra compare, Diff Checker, Notepad ++ • Take accountability to review MOPs and automated dry-run outputs with the engineering team before any scheduled change to ensure accuracy • Required to attend daytime MOP review and team/project synch meetings • Regularly assist team members in an "overwatch" role during cutovers, migrations, and upgrades through network monitoring tools to ensure customer service interruptions do not occur • Engage in both intra and interdepartmental communication to plan, schedule, prioritize, and prepare for maintenance window activities • Enter all night changes into the change management database "Kirke" and ensure all notifications are approved prior to maintenance window activities • Work closely with local onsite Network Assurance team to validate no customer impacts were sustained to our customers. All pre/post configuration/traffic checks will need to be performed on each device being worked on MUST HAVE SKILLS (Most Important): • Bachelor's degree or four or more years of work experience • Willingness to work a flexible schedule, including nights and an occasional weekend as necessary. • Positive attitude, strong work ethic, and a desire to do your best each day • Must possess extensive knowledge of Layer 1 troubleshooting for copper and fiber cabling including Cat5/6 copper cabling and fiber types of SC, LC, FC, MPO, MOP creation and implementation • Must have in depth knowledge and expert comprehension of Command Line Interface (CLI) commands for Nokia 7750/7706/7250, Cisco 55A1,5504, 5508, 9508, CRS-16, Nexus 3k/5k/7K/9K (IOS, XE, XR, NX-OS) • Experience with IP Layer 1-3 for Edge Networks and strong knowledge of MPLS • Hands on experience with virtualization of networks and implementing updates and changes on working devices • Ability to follow and implement detailed engineering design documents • The ability to articulate and explain your work and self through email and phone. • Knowledgeable in Layer 1 remote connectivity to network devices via console and Ethernet, copper (CAT5/6) and SC, LC, MPO fiber cabling • Ability to work closely with others, manage the workload you are assigned, and schedule work/project manage tasks with other installation teams and groups • Ability to clearly communicate ideas in order to lead phone calls to implement changes and thoroughly test for any residual issues afterwards during maintenance window hours. • Need to be comfortable working on the phone and troubleshooting with local support personnel to correct OBM (Out of Band Management) and Ethernet/fiber cabling issues. • Functional knowledge of TCP/IP (IPv4 and IPv6) • They must have the ability to follow and implement detailed engineering design documents and join team/project calls throughout the day in various US time zones and have the ability to convey status and work updates • Administrative skills to track and update emails, tickets, projects, and work logs • Knowledge of spine and leaf fabric networking • Working knowledge of VXLAN and BGP • Ability to pay CLOSE attention to details and be a thorough will all aspects of your work DESIRED SKILLS: • A bachelor's degree • CCNA or CCNP certifications • Hands on experience with Nokia SR-OS devices • Experience with virtualization technology in a corporate environment • Knowledge of Cloud Computing (VMWare, Openstack, AWS, Azure, or similar). Some experience with data center and cloud technologies such as Linux OS, VMware, Open-Stack, Ansible, Chef/Puppet and/or Docker • Five or more years of experience that involved working on large, complex data networks. • Experience working with data networking gear and troubleshooting data networking problems involving: TCP/IP, BGP, MP-BGP, OSPF, MPLS, IPv4, IPv6, L2VPN, L3VPN, SIP, and other advanced LAN/WAN technologies and concepts • Experience with planning for multiple technical projects AND implementing them by working with people using multiple lines of communications (phone, e-mail, face to face, etc.) in order to deliver them on time • Good understanding of 3G and 4G call flow EDUCATION/CERTIFICATIONS: • Bachelor's degree or four or more years of relevant work experience Contact: [email protected] job and many more are available through The Judge Group. Find us on the web at www.judge.com

Location: REMOTESalary: $40.00 USD Hourly - $50.00 USD HourlyDescription: Implementation/Telecommunications Engineer | Irvine, CA (Remote) | 30 Months Project Detailed Engineering Perform detailed Location-specific Equipment Engineering. This includes developing all of the specifications required for installation forces to properly install, turn up, inventory, and configure the equipment, obtaining appropriate management approvals, issuing purchase orders, and ensuring vendor delivery Ensure that work meets all applicable engineering, financial, planning, and operational/ NA standards Manage, input, and update IFP, XNG, SPM to reflect new builds, adds, and decommissions. Ensure the network elements (technical facility, location, bay/shelf, alarm points, etc.) are documented with necessary identifiers. Labels Engineer floor space, rack space and hardware for all equipment in locations. Engineer placement and cable measurements Provide power/fuse/breaker assignments Engineer equipment cooling and airflow. Create Workflows in the required systems Communicate issues to lead engineers Work with regions to resolve issues Recommend changes to the process for national impact. Contact: [email protected] job and many more are available through The Judge Group. Find us on the web at www.judge.com

Provide technical assistance and support for incoming queries and issues related to computer systems, software, and hardware. Troubleshoot and resolve problems with desktop computers, laptops, printers, and other peripherals.Install, configure, and upgrade operating systems and software applications. Set up and maintain user accounts, permissions, and passwords. Perform routine maintenance tasks such as applying patches, updates, and antivirus software to ensure systems are secure and up-to-date. Monitor system performance and conduct regular backups. Diagnose and resolve technical problems and escalate issues to appropriate personnel when necessary. Analyze system logs and identify potential issues proactively. Maintain accurate records of support requests, repairs, and solutions provided. Document procedures and guidelines for troubleshooting common technical issues.MPI does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, disability, veteran status, marital status, or based on an individual's status in any group or class protected by applicable federal, state or local law. MPI encourages applications from minorities, women, the disabled, protected veterans and all other qualified applicants.Level 2 or level 3 helpdeskDesktop Engineer who can help set up, and profile machines, and someone that is willing to move equipmentSet up new laptops - update with windows, MS Teams, ect.Desktop imaging SCCMFinancial Service experience is a plus!

Company ProfileControl Concepts is part of Comfort Systems USA Southeast. Headquartered in Cumming, GA, CCI creates solutions for smarter, safer buildings. We offer a single point of contact for Building Automation, Security and Lighting needs. Through our network of worldwide partners and experienced professionals, we are able to provide a cost-efficient solution for any building need. Remote opportunity available. Position overviewAs a building automation system engineer, you will be tasked with programming, developing, commissioning, and implementing Direct Digital Control and other building equipment and automation systems which are primarily associated with HVAC systems in commercial buildings.Job Duties• Perform programming, documenting, training and maintaining building automation systems while working with complex networks, multi-vendor system integration, open technologies, software-based interfaces, HVAC controls, security systems and other facility/infrastructure management systems• Develop programs, graphical user interfaces, commission building automation systems, and support a wide range of software, and subsystems from simple to complex in nature.• Execute multiple tasks and projects simultaneously• Assist with additional projects as needed and identify and manage priorities with minimal guidance• Possess and maintain exceptional work ethic and uphold company values and demand the highest standard of conduct from self and others• High level of detail to programming and graphical user interfaces and effective communicationRequirements• 2-5 years of experience in the Industry.• Bachelor's degree in Computer Engineering, Computer Science, Electrical Engineering, Mechanical Engineering or related field preferred.• Tridium Niagara 4 Certification (preferred) and have strong understanding of the "Station Building" process.• Experience with Delta Controls products/programming a plus.• Ability to read and interpret drawings, blueprints and specifications.• Create programs to control equipment based on provided sequences.• Understanding of networks, VPNs, competent computer troubleshooting, general IT knowledge (VM, remote desktop, servers, routers, ports, encryption/SSL)• Possess excellent analytical and problem-solving skills as well as the ability to provide sound reliable judgement in complex situations.• Time management and organizational skills.• Strong communication skills both written and verbal.• Self?starter and able to work both independently and team environment with minimal supervision.Compensation• Salary Range Starting at: $70K-$80K/year based on qualifications & experience Comprehensive and Competitive Benefits• Medical, Vision, Dental• Basic company-paid life insurance• Voluntary life insurance for employee, spouse and/or child(ren)• Basic company-paid accidental death & dismemberment (AD&D)• Voluntary AD&D• Company paid short term disability• Voluntary Long-Term Disability• Company paid Employee Assistance Program• 401(k) Plan with several investment options• Healthcare reimbursement account• Dependent care reimbursement account• Vehicle discount purchase programs

Job Title Operating Engineer Job Description Summary Responsible to ensure the efficient operation and maintenance of mechanical, electrical and plumbing equipment and systems for the assigned property(s). Responsibilities include (but are not limited to) maintaining a clean and safe working environment, performing rounds, conducting routine assessments, performance of day-to-day preventive and corrective maintenance, painting, and housekeeping for assigned properties Job Description [Please delete this section before finalizing the Job Requisition: Below is an example Job Description for this Job Profile, and may need to be updated to reflect the specific responsibilities of this role. Please also ensure that you validate the selection of the Job Profile and placement of this Position in the Job Architecture before finalizing.]ESSENTIAL FUNCTIONS AND RESPONSIBILITIES• Perform all plumbing, electrical, or HVAC requirements of the building(s)• Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc.• Monitor and adjust all mechanical/pneumatic equipment, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings• Verify field conditions and perform any necessary repairs or adjustments• Monitor Energy Management• Repair doors, ceilings, hand railings, and floors and other general repairs, adjustments and installations about the property• Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories, etc.)• Perform preventive maintenance duties in accordance with C&W standards, building protocol, manufacturer recommendations and industry best practices. including changing filters, cleaning coils, flushing condensers, punching tubes, greasing fan, pump and motor bearings as required, inspecting and adjusting belts, replacing motor bearings, aligning pulleys and shafts, monitor condenser, chilled, heating and secondary water chemical treatment and its associated feed equipment, clean and maintain cooling towers, and perform annual inspections and other scheduled routines as directed.• Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps. Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of obstructions and debris• Check for properly operating emergency exit signs and lights and ensure free and clear access to emergency stairs and exits. Perform additional fire and life safety inspections as per NFPA and local jurisdiction, C&W standards, building protocol and as directed by superiors and property management• Document and report activities to supervisor• Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns• Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits• Complete all required C&W Safety Training as scheduled annually• Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hoursKEY COMPETENCIES• Technical Proficiency• Initiative• Flexibility• Multi-Tasking• Sense of UrgencyIMPORTANT EDUCATION• High School Diploma of GED Equivalent• Graduate of apprentice program or trade school preferredIMPORTANT EXPERIENCE• 5+ years of related work experience in operating mechanical, electrical, and plumbing systems in a commercial property settingADDITIONAL ELIGIBILITY QUALIFICATIONS• Appropriate license/permit for trade as may be required, i.e. Journeyman or Master Electrician License or City Licenses, such as Refrigeration Certificate of Fitness, High Pressure Boiler License, High Pressure Steam Operator, etc.)• May be required to have certification as a Universal Technician for CFC's depending on market licensure requirements• Possess and maintain a valid driver's license and good driving record with periodic checks (where applicable)• Basic Computing Skills in Outlook, Excel & Word• Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc.• Knowledgeable in energy management systems, techniques and operations.• Thorough knowledge in all building systems operations, maintenance and repair.May be only maintenance staff member on duty during certain shifts; may be required to work extended periods of time without relief when responding to priority/emergency situations (including overtime type assignments); may require shift work and/or on call dutiesWORK ENVIRONMENTThis job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Regularly required to travel outside between properties in varying weather conditions.PHYSICAL DEMANDSThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.• Must have ability to stoop, stand, climb, frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices• Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine• Involves movement between departments, floors, and properties to facilitate work• Ability to speak clearly so others can understand you• Ability to read and understand information presented orally and in writing• Regularly required to utilize vision abilities, allowing reading of printed material, drawings, and schematicsAAP/EEO STATEMENTC&W provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Further, the company takes affirmative action to ensure that applicants are employed and employees during employment are treated without regard to any of these characteristics. Discrimination of any type will not be tolerated.OTHER DUTIESThis job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice.Cushman & Wakefield also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health, vision, and dental insurance, flexible spending accounts, health savings accounts, retirement savings plans, life, and disability insurance programs, and paid and unpaid time away from work. In addition to a comprehensive benefits package, Cushman and Wakefield provide eligible employees with competitive pay, which may vary depending on eligibility factors such as geographic location, date of hire, total hours worked, job type, business line, and applicability of collective bargaining agreements.The compensation that will be offered to the successful candidate will depend on factors such as whether the position is covered by a collective bargaining agreement, the geographic area in which the work will be performed, market pay rates in that area, and the candidate's experience and qualifications.The company will not pay less than minimum wage for this role.The compensation for the position is: $42.01 - $42.01Cushman & Wakefield provides equal employment opportunity. Discrimination of any type will not be tolerated. Cushman & Wakefield is an Equal Opportunity / Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or any other characteristic protected by state, federal, or local law.In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or email [email protected] . Please refer to the job title and job location when you contact us.

JOB DESCRIPTION Job Description: Under the general supervision of a Manager, the Engineer Helper provides assistance to engineers with various engineering duties. Incumbents may be assigned specific projects or may act as part of a team on a larger project. Some latitude for independent judgment is possible.RESPONSIBILITIES Essential Job Duties:Participates in the development and execution of engineering projects. This may include design, implementation, testing.Provides statistical reports and data on engineering projects to carefully document the process, provide necessary invoicing, purchase needed materials and equipment.Completes projects requiring engineering and technical ability as assigned.Makes sound decisions on minor problems related to the work being performed based on established guidelines and principles and supervisor guidance.May prepare project cost estimates and material and labor requirements for project manager.May perform other duties as assignedQUALIFICATIONS Skills, Education, and Experience:Bachelor's degree from an accredited college or university in an engineering discipline.One or more years of related work experience in the field of engineering strongly desired.Ability to use various pieces of equipment related to the maintenance, electrical and mechanical trades.Exceptional interpersonal skills and the ability to function as a team member in a demanding service environment.Working Conditions: Normal working conditions with the absence of disagreeable elementsNote: The statements herein are intended to describe the general nature and level of work being performed by employees, and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel so classified.Newmark is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation and gender identity, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law.Salary: $24.38/hr. - $26.38/hr.The hourly rate is between $24.38/hr and $26.38per hour, and the anticipated annual base compensation range for this position will be $51,334.4- $54,870.4 inclusive of required overtime.