Package Engineer Salary in New York, NY

Job Title Operating Engineer Job Description Summary Responsible to ensure the efficient operation and maintenance of mechanical, electrical and plumbing equipment and systems for the assigned property(s). Responsibilities include (but are not limited to) maintaining a clean and safe working environment, performing rounds, conducting routine assessments, performance of day-to-day preventive and corrective maintenance, painting, and housekeeping for assigned properties Job Description ESSENTIAL FUNCTIONS AND RESPONSIBILITIES• Perform all plumbing, electrical, or HVAC requirements of the building(s)• Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc.• Monitor and adjust all mechanical/pneumatic equipment, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings• Verify field conditions and perform any necessary repairs or adjustments• Monitor Energy Management• Repair doors, ceilings, hand railings, and floors and other general repairs, adjustments and installations about the property• Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories, etc.)• Perform preventive maintenance duties in accordance with C&W standards, building protocol, manufacturer recommendations and industry best practices. including changing filters, cleaning coils, flushing condensers, punching tubes, greasing fan, pump and motor bearings as required, inspecting and adjusting belts, replacing motor bearings, aligning pulleys and shafts, monitor condenser, chilled, heating and secondary water chemical treatment and its associated feed equipment, clean and maintain cooling towers, and perform annual inspections and other scheduled routines as directed.• Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps. Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of obstructions and debris• Check for properly operating emergency exit signs and lights and ensure free and clear access to emergency stairs and exits. Perform additional fire and life safety inspections as per NFPA and local jurisdiction, C&W standards, building protocol and as directed by superiors and property management• Document and report activities to supervisor• Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns• Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits• Complete all required C&W Safety Training as scheduled annually• Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hoursKEY COMPETENCIES• Technical Proficiency• Initiative• Flexibility• Multi-Tasking• Sense of UrgencyIMPORTANT EDUCATION• High School Diploma of GED Equivalent• Graduate of apprentice program or trade school preferredIMPORTANT EXPERIENCE• 5+ years of related work experience in operating mechanical, electrical, and plumbing systems in a commercial property settingADDITIONAL ELIGIBILITY QUALIFICATIONS• Appropriate license/permit for trade as may be required, i.e. Journeyman or Master Electrician License or City Licenses, such as Refrigeration Certificate of Fitness, High Pressure Boiler License, High Pressure Steam Operator, etc.)• May be required to have certification as a Universal Technician for CFC's depending on market licensure requirements• Possess and maintain a valid driver's license and good driving record with periodic checks (where applicable)• Basic Computing Skills in Outlook, Excel & Word• Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc.• Knowledgeable in energy management systems, techniques and operations.• Thorough knowledge in all building systems operations, maintenance and repair.May be only maintenance staff member on duty during certain shifts; may be required to work extended periods of time without relief when responding to priority/emergency situations (including overtime type assignments); may require shift work and/or on call dutiesWORK ENVIRONMENTThis job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Regularly required to travel outside between properties in varying weather conditions.PHYSICAL DEMANDSThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.• Must have ability to stoop, stand, climb, frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices• Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine• Involves movement between departments, floors, and properties to facilitate work• Ability to speak clearly so others can understand you• Ability to read and understand information presented orally and in writing• Regularly required to utilize vision abilities, allowing reading of printed material, drawings, and schematicsAAP/EEO STATEMENTC&W provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Further, the company takes affirmative action to ensure that applicants are employed and employees during employment are treated without regard to any of these characteristics. Discrimination of any type will not be tolerated.OTHER DUTIESThis job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice.Cushman & Wakefield also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health, vision, and dental insurance, flexible spending accounts, health savings accounts, retirement savings plans, life, and disability insurance programs, and paid and unpaid time away from work. In addition to a comprehensive benefits package, Cushman and Wakefield provide eligible employees with competitive pay, which may vary depending on eligibility factors such as geographic location, date of hire, total hours worked, job type, business line, and applicability of collective bargaining agreements.The compensation that will be offered to the successful candidate will depend on factors such as whether the position is covered by a collective bargaining agreement, the geographic area in which the work will be performed, market pay rates in that area, and the candidate's experience and qualifications.The company will not pay less than minimum wage for this role.The compensation for the position is: $42.01 - $49.96Cushman & Wakefield provides equal employment opportunity. Discrimination of any type will not be tolerated. Cushman & Wakefield is an Equal Opportunity / Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or any other characteristic protected by state, federal, or local law.In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or email [email protected] . Please refer to the job title and job location when you contact us.

Pennoni is a multidisciplinary consulting engineering firm that was founded over five decades ago!  We approach engineering challenges from a wider spectrum of angles than most, from land development to energy management.  Our goal is to help communities and private sector clients alike navigate the ever-changing technological advancements available while learning how best to integrate “smart” solutions into the current landscape; this ultimately contributes to resilient and sustainable planning.  Our combination of talent and experience generates unprecedented solutions for diverse & iconic projects around the globe!We are hiring for a Civil Engineer to join our team on a full-time, direct basis while based at our office in the New York City Metro area. Primary Responsibilities:Prepare site plan development drawings while utilizing AutoCAD Civil 3D; this involves taking land survey data to develop a site plan package that is compliant with municipal regulations.Design and detail of site layout, removals, grading, utilities, etc.Design and detail stormwater management:  hydrologic & hydraulic modeling, erosion control, sediment control, relevant design calculations, etc.Ensure regulatory approval; this includes having an understanding of (and working with) planning & zoning as well as SEQRA compliance.Comply with a variety of New York Metro area standards / local permitting processes (e.g.:  NYSDEC, NYCDEP, NYCDOB, NYCDOT, NYCDPR, MTA / NYCT, etc.).Communicate with clients and regulatory agencies.Assist with mentoring junior-level staff.Assist with field inspections, as needed.Additional tasks may be assigned, as needed. Basic Requirements:Bachelor’s degree in Civil Engineering (or a related technical discipline).At least 4 years of professional experience working in Civil Engineering (preferably with Land Development and/or Site Design projects). Preferred Qualifications:PE in NY is strongly preferred.Experience working on brownfield / land redevelopment projects.Experience working with NYSDEC & NYCDEP stormwater management, especially while utilizing Hydrology and Hydraulics (H&H) modeling tools, is a plus!Proficiency with engineering tools (e.g.: CADD, etc.); experience with utilizing AutoCAD Civil 3D to prepare site development plans is a plus!Experience working with regulatory approvals, including working with planning & zoning as well as SEQRA compliance; experience working with NYCDOT Builders Pavement Plans and/or NYCDOB plans (site / utility / ADA compliance) is a plus!Proven ability to prepare a site plan package for submission to local jurisdiction(s) is a plus!Experience working successfully within assigned budgets.Proficiency on basic office software applications, especially Microsoft Office 365.Proven ability to work collaboratively in a team environment with minimal supervision while displaying a positive attitude.Excellent organizational skills, especially with a proven ability to work in an energetic and challenging work environment on a variety of projects; this person will be expected to demonstrate a self-motivated demeanor while effectively multi-tasking and prioritizing multiple assignments.Proven track record of displaying a professional demeanor (e.g.:  proactive work habits, professional appearance, etc.).Excellent communication skills (verbal & written). TARGET SALARY RANGE:  $95,000 - $105,000 (per year)  Why Work With Us?Pennoni is an ENR Top 500 consulting engineering firm.  At our core, we recognize that the unique qualities of Pennoni’s individuals are essential for innovation and growth as a whole; we offer many opportunities to help you build your career!  We continually strive to build a great workplace where our employees trust the people they work for, enjoy the people they work with, and take pride in what they do. Equal Opportunity Employer / Veterans / Disabled

Location: REMOTESalary: $70,000.00 USD Annually - $90,000.00 USD AnnuallyDescription: Our client is currently seeking a Engineer - Circuit Breaker/Electrical Contacts 5+ years of successful experience as an engineer working in electrical contacts, who has been in interaction with customers and who would like to move to a sales position in a more international group.• Minimum B.S. in mechanical engineering, electrical engineering, or related technical discipline. • Proven experience in the MiniCB, MoldedCaseCB, AirCB, and VacuumCB North American markets. • Metallurgy Industry or similar experience a plus. • Hands-on experience in manufacturing and project/process engineering in the electrical contacts industry. • Strong analytical skills and clear, proven ability to research, organize, develop, and present a variety of content to technical and non-technical issues. • Strong understanding of solution selling and the ability to package and articulate the business value of a solution. • Strong sense of initiative and perseverance. • Enthusiastic, hard-working, and highly productive. • Experienced in managing and delivering on time against multiple priorities. • Excellent verbal, and written communication skills. Contact: [email protected] job and many more are available through The Judge Group. Find us on the web at www.judge.com

Yahoo Sports connects fans to the sports and fantasy games they love most, providing personalized quality content and superior fan experiences every day.A Little About Us Yahoo Sports connects fans to the sports and fantasy games they love most. We are passionate about building best-in-class sports experiences that deliver real-time, personalized quality content to millions of sports fans worldwide. At Yahoo Sports, "Fans come first." A Lot About You You are an experienced, motivated engineer who is passionate about software development and building high quality products and services. You thrive working as part of a team of smart, talented engineers and product designers who value efficiency, creativity, and a trusted, collaborative work environment. You are curious, driven, and enjoy challenging work. ResponsibilitiesCode primarily in Java and work with technologies like: GraphQL, MySQL, Redis, Kotlin, Kubernetes, Docker; to build and evolve our backend, feed processing and data serving systems, with an emphasis on modular, performant, maintainable code designCollaborate with other engineers and our product and design teams, to help define, build. deliver and maintain services and features, support devops, and modernize our tech stacksDemonstrate engineering excellence through technical and architecture design discussions, code reviews, embodying coding best practices, mentoring junior engineers, performance optimizing, automated tests, build pipeline and automation support, and writing documentationOwn and deliver -- from the small must-do tasks, to large, complex projects with many moving parts.Share your opinions on, and help drive, our technical direction, best practices, product designs/ideas, team processes, peer feedback - we value, and depend on, your input!Minimum QualificationsSolid coding chops, code design skills and expertise in software development best practices -- including object-oriented design; writing modular, extensible, reusable, testable code; writing unit tests; data structures; design patterns; performance profiling and tuning3+ years of software development experience and building scalable, performant, high availability backend systems and data servicesExperience with modern Java (including Streams, Lambdas, CompletableFutures, etc.), Linux, scripting, HTTP, devops, MySQL, caching frameworks and strategies, git, unit test frameworks, containerization, etc. -- the skills and tools needed to build high performing backend systems and servicesExcellent analytical, problem solving, and debugging skillsSolid organizational skills and the ability to coordinate and set priorities with other stakeholders and partners, and help lead development projectsThe quintessential teammate - high EQ, great communicator, adaptable, supportive, hard working and enjoys a good laughBS in Computer Science or Engineering or equivalent CS trainingBeing a sports fan is a plus!Yahoo is proud to be an equal opportunity workplace. All qualified applicants will receive consideration for employment without regard to, and will not be discriminated against based on age, race, gender, color, religion, national origin, sexual orientation, gender identity, veteran status, disability or any other protected category. Yahoo is dedicated to providing an accessible environment for all candidates during the application process and for employees during their employment. If you need accessibility assistance and/or a reasonable accommodation due to a disability, please submit a request via the Accommodation Request Form ( www.yahooinc.com/careers/contact-us.html ) or call 408-336-1409. Requests and calls received for non-disability related issues, such as following up on an application, will not receive a response.At Yahoo, we know that diversity makes us stronger. We are committed to a collaborative, inclusive environment that encourages authenticity and fosters a sense of belonging. We strive for everyone to feel valued, connected, and empowered to reach their potential and contribute their best. Check out our diversity and inclusion ( www.yahooinc.com/diversity/ ) page to learn more.The compensation for this position ranges from $111,000.00 - $231,250.00/yr and will vary depending on factors such as your location, skills and experience. The compensation package may also include incentive compensation opportunities in the form of discretionary annual bonus or commissions, in addition to equity incentives. Yahoo provides industry-leading benefits including healthcare, 401K savings plan, company holidays, vacation, sick time, parental leave and an employee assistance program. Eligibility requirements apply.Yahoo has a high degree of flexibility around employee location and hybrid working. In fact, our flexible-hybrid approach to work is one of the things our employees rave about. Most roles don't require specific regular patterns of in-person office attendance. If you join Yahoo, you may be asked to attend (or travel to attend) on-site work sessions, team-building, or other in-person events. When these occur, you'll be given notice to make arrangements. If you're curious about how this factors into this role, please discuss with the recruiter. Currently work for Yahoo? Please apply on our internal career site.

Job Title Engineer (94) Job Description Summary Responsible to ensure the efficient operation and maintenance of mechanical, electrical and plumbing equipment and systems for the assigned property(s). Responsibilities include (but are not limited to) maintaining a clean and safe working environment, performing rounds, conducting routine assessments, performance of day-to-day preventive and corrective maintenance, painting, and housekeeping for assigned properties Job Description ESSENTIAL FUNCTIONS AND RESPONSIBILITIES• Perform all plumbing, electrical, or HVAC requirements of the building(s)• Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc.• Monitor and adjust all mechanical/pneumatic equipment, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings• Verify field conditions and perform any necessary repairs or adjustments• Monitor Energy Management• Repair doors, ceilings, hand railings, and floors and other general repairs, adjustments and installations about the property• Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories, etc.)• Perform preventive maintenance duties in accordance with C&W standards, building protocol, manufacturer recommendations and industry best practices. including changing filters, cleaning coils, flushing condensers, punching tubes, greasing fan, pump and motor bearings as required, inspecting and adjusting belts, replacing motor bearings, aligning pulleys and shafts, monitor condenser, chilled, heating and secondary water chemical treatment and its associated feed equipment, clean and maintain cooling towers, and perform annual inspections and other scheduled routines as directed.• Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps. Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of obstructions and debris• Check for properly operating emergency exit signs and lights and ensure free and clear access to emergency stairs and exits. Perform additional fire and life safety inspections as per NFPA and local jurisdiction, C&W standards, building protocol and as directed by superiors and property management• Document and report activities to supervisor• Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns• Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits• Complete all required C&W Safety Training as scheduled annually• Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hoursKEY COMPETENCIES• Technical Proficiency• Initiative• Flexibility• Multi-Tasking• Sense of UrgencyIMPORTANT EDUCATION• High School Diploma of GED Equivalent• Graduate of apprentice program or trade school preferredIMPORTANT EXPERIENCE• 5+ years of related work experience in operating mechanical, electrical, and plumbing systems in a commercial property settingADDITIONAL ELIGIBILITY QUALIFICATIONS• Appropriate license/permit for trade as may be required, i.e. Journeyman or Master Electrician License or City Licenses, such as Refrigeration Certificate of Fitness, High Pressure Boiler License, High Pressure Steam Operator, etc.)• May be required to have certification as a Universal Technician for CFC's depending on market licensure requirements• Possess and maintain a valid driver's license and good driving record with periodic checks (where applicable)• Basic Computing Skills in Outlook, Excel & Word• Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc.• Knowledgeable in energy management systems, techniques and operations.• Thorough knowledge in all building systems operations, maintenance and repair.May be only maintenance staff member on duty during certain shifts; may be required to work extended periods of time without relief when responding to priority/emergency situations (including overtime type assignments); may require shift work and/or on call dutiesWORK ENVIRONMENTThis job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Regularly required to travel outside between properties in varying weather conditions.PHYSICAL DEMANDSThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.• Must have ability to stoop, stand, climb, frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices• Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine• Involves movement between departments, floors, and properties to facilitate work• Ability to speak clearly so others can understand you• Ability to read and understand information presented orally and in writing• Regularly required to utilize vision abilities, allowing reading of printed material, drawings, and schematicsAAP/EEO STATEMENTC&W provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Further, the company takes affirmative action to ensure that applicants are employed and employees during employment are treated without regard to any of these characteristics. Discrimination of any type will not be tolerated.OTHER DUTIESThis job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice.Cushman & Wakefield also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health, vision, and dental insurance, flexible spending accounts, health savings accounts, retirement savings plans, life, and disability insurance programs, and paid and unpaid time away from work. In addition to a comprehensive benefits package, Cushman and Wakefield provide eligible employees with competitive pay, which may vary depending on eligibility factors such as geographic location, date of hire, total hours worked, job type, business line, and applicability of collective bargaining agreements.The compensation that will be offered to the successful candidate will depend on factors such as whether the position is covered by a collective bargaining agreement, the geographic area in which the work will be performed, market pay rates in that area, and the candidate's experience and qualifications.The company will not pay less than minimum wage for this role.The compensation for the position is: $49.96 - $49.46Cushman & Wakefield provides equal employment opportunity. Discrimination of any type will not be tolerated. Cushman & Wakefield is an Equal Opportunity / Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or any other characteristic protected by state, federal, or local law.In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or email [email protected] . Please refer to the job title and job location when you contact us.

Job Title Operating Engineer Job Description Summary Responsible to ensure the efficient operation and maintenance of mechanical, electrical and plumbing equipment and systems for the assigned property(s). Responsibilities include (but are not limited to) maintaining a clean and safe working environment, performing rounds, conducting routine assessments, performance of day-to-day preventive and corrective maintenance, painting, and housekeeping for assigned properties Job Description [Please delete this section before finalizing the Job Requisition: Below is an example Job Description for this Job Profile, and may need to be updated to reflect the specific responsibilities of this role. Please also ensure that you validate the selection of the Job Profile and placement of this Position in the Job Architecture before finalizing.]ESSENTIAL FUNCTIONS AND RESPONSIBILITIES• Perform all plumbing, electrical, or HVAC requirements of the building(s)• Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc.• Monitor and adjust all mechanical/pneumatic equipment, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings• Verify field conditions and perform any necessary repairs or adjustments• Monitor Energy Management• Repair doors, ceilings, hand railings, and floors and other general repairs, adjustments and installations about the property• Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories, etc.)• Perform preventive maintenance duties in accordance with C&W standards, building protocol, manufacturer recommendations and industry best practices. including changing filters, cleaning coils, flushing condensers, punching tubes, greasing fan, pump and motor bearings as required, inspecting and adjusting belts, replacing motor bearings, aligning pulleys and shafts, monitor condenser, chilled, heating and secondary water chemical treatment and its associated feed equipment, clean and maintain cooling towers, and perform annual inspections and other scheduled routines as directed.• Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps. Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of obstructions and debris• Check for properly operating emergency exit signs and lights and ensure free and clear access to emergency stairs and exits. Perform additional fire and life safety inspections as per NFPA and local jurisdiction, C&W standards, building protocol and as directed by superiors and property management• Document and report activities to supervisor• Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns• Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits• Complete all required C&W Safety Training as scheduled annually• Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hoursKEY COMPETENCIES• Technical Proficiency• Initiative• Flexibility• Multi-Tasking• Sense of UrgencyIMPORTANT EDUCATION• High School Diploma of GED Equivalent• Graduate of apprentice program or trade school preferredIMPORTANT EXPERIENCE• 5+ years of related work experience in operating mechanical, electrical, and plumbing systems in a commercial property settingADDITIONAL ELIGIBILITY QUALIFICATIONS• Appropriate license/permit for trade as may be required, i.e. Journeyman or Master Electrician License or City Licenses, such as Refrigeration Certificate of Fitness, High Pressure Boiler License, High Pressure Steam Operator, etc.)• May be required to have certification as a Universal Technician for CFC's depending on market licensure requirements• Possess and maintain a valid driver's license and good driving record with periodic checks (where applicable)• Basic Computing Skills in Outlook, Excel & Word• Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc.• Knowledgeable in energy management systems, techniques and operations.• Thorough knowledge in all building systems operations, maintenance and repair.May be only maintenance staff member on duty during certain shifts; may be required to work extended periods of time without relief when responding to priority/emergency situations (including overtime type assignments); may require shift work and/or on call dutiesWORK ENVIRONMENTThis job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Regularly required to travel outside between properties in varying weather conditions.PHYSICAL DEMANDSThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.• Must have ability to stoop, stand, climb, frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices• Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine• Involves movement between departments, floors, and properties to facilitate work• Ability to speak clearly so others can understand you• Ability to read and understand information presented orally and in writing• Regularly required to utilize vision abilities, allowing reading of printed material, drawings, and schematicsAAP/EEO STATEMENTC&W provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Further, the company takes affirmative action to ensure that applicants are employed and employees during employment are treated without regard to any of these characteristics. Discrimination of any type will not be tolerated.OTHER DUTIESThis job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice.Cushman & Wakefield also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health, vision, and dental insurance, flexible spending accounts, health savings accounts, retirement savings plans, life, and disability insurance programs, and paid and unpaid time away from work. In addition to a comprehensive benefits package, Cushman and Wakefield provide eligible employees with competitive pay, which may vary depending on eligibility factors such as geographic location, date of hire, total hours worked, job type, business line, and applicability of collective bargaining agreements.The compensation that will be offered to the successful candidate will depend on factors such as whether the position is covered by a collective bargaining agreement, the geographic area in which the work will be performed, market pay rates in that area, and the candidate's experience and qualifications.The company will not pay less than minimum wage for this role.The compensation for the position is: $42.01 - $42.01Cushman & Wakefield provides equal employment opportunity. Discrimination of any type will not be tolerated. Cushman & Wakefield is an Equal Opportunity / Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or any other characteristic protected by state, federal, or local law.In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or email [email protected] . Please refer to the job title and job location when you contact us.

Our client, is a leading quantitative investment company focused on computer-driven trading in global financial markets. We are a team of researchers, engineers, and financial industry professionals using sophisticated statistical models to analyze data and identify predictive signals to generate superior investment returns. Our investment teams each focus on their independent strategies while utilizing the firm's proprietary, state-of-the-art technology and data platform to optimize their alpha research.They have an opening for a Data Engineer.In this role you will be responsible for expanding and optimizing our data and data pipeline architecture, as well as optimizing data flow and collection. You should be experienced in building data pipelines and building data systems from the ground up. This individual will support our quantitative developers, data modelers, architects, and data owners across various data initiatives, and ensure an optimal and consistent data delivery architecture. You should be self-directed and comfortable supporting the data needs of multiple teams, and be prepared to be onsite 4 days a week. This is a DIRECT-HIRE FTE role. No consultants, C2C or ContractorsRoles • Design, construct, test and maintain data architectures and data pipelines.• Ensure our data architecture supports the requirements of the business.• Develop custom data models and algorithms to apply to data sets.• Assess the effectiveness and accuracy of new data sources and data gathering techniques.• Discover opportunities for data acquisition.• Develop data set processes for data modeling, mining, and production.• Employ a variety of languages and tools to marry systems together.• Recommend ways to improve data reliability, efficiency, and quality.• Leverage large volumes of data from internal and external sources to answer business demands.• Introduce automation through effective metadata management and using innovative and modern tools and techniques. Partially or completely automate the most common and repeatable data preparation and integration tasks.• Propose appropriate data ingestion, preparation, integration, and operationalization techniques in addressing data requirements.• Lead the development of data governance policies and best practices for consumers and users of data we provision.• Coordinate with different functional teams to implement models and monitor outcomes; and develop processes and tools to monitor and analyze model performance and data accuracy.Skills:• Expert skills in the use of Python.• Significant experience in the development of new automation of data feeds and pipelines• Experience in supporting all kinds of data sets in various formats, structured or unstructured.• Knowledge and/or certifications on upcoming NoSQL/Hadoop-oriented databases like MongoDB, Cassandra, and others for non-relational databases.• Experienced working with large, heterogeneous data sets in building and optimizing data pipelines, pipeline architectures and integrated datasets using traditional data integration technologies;• Experienced working with popular data discovery, analytics and BI software tools such as Tableau, Power BI and others• Experienced working with data governance/data quality and data security teams.• Experienced employing Microsoft MDM (Master Data Management) and MDS.• Ability to troubleshoot complicated issues across multiple systems and driving solutions.• Effectively convey technical concepts to non-technical individuals.• Demonstrate a high level of Data Security Awareness; and• Experience with financial and or legal industry data is a plus.Qualifications:• A Bachelor's or Master's Degree in Computer Science, Statistics, Applied Mathematics, Data Management, Information Systems, Information Science or a Related quantitative field or equivalent work experience;• At least five years' experience in data management disciplines including data integration, modeling, optimization and data quality, and/or other areas directly relevant to data engineering responsibilities and tasks.• At least three years' experience working in cross-functional teams and collaborating with business stakeholders in support of a departmental and/or multi-departmental data management and analytics initiative.• Excellent communication and collaboration skill• Excellent problem solving and analytical skills.• Must be highly effective within a collaborative environment; and• Must be able to independently resolve issues and efficiently self-direct work activities based on the ability to capture, organize, and analyze information.Compensation: $120,000 - 175,000 base salary, plus incentives and an excellent benefits package.Applicants must be authorized to work for any U.S. employer.Staff Smart, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, genetic information, disability status, or any other characteristic protected by law.

Location: REMOTESalary: $57.00 USD Hourly - $60.00 USD HourlyDescription: JOB TITLE: RF Engineer III Working Model: Work from Home MUST HAVE SKILLS (Most Important): Personal integrity Self-starter with initial guidance Ability to accomplish tasks with minimal supervision Attention to detail Works well with others in a team environment Excellent communication skill- written and verbal Can-do attitude Flexibility Superior organizational and project planning skills DESIRED SKILLS: ATOLL, Roof view and/or Roofmaster, Google Earth / .kml import, FCC ASR and ULS databases, FUZE Other desired tools: Microsoft Office suite of products (advanced experience level), Tableau, MapInfo thematic map creation, PIM mitigation techniques, Return Loss and Cable Loss calculations, Sweep measurement expertise, Database management. Functional knowledge of 4G/5G Wireless Systems JOB DUTIES: The RF Engineer will be responsible for but not limited to the following: Review site close out packages, site sweep/PIM results for accuracy, updating databases with necessary information. Create site design RFDS and complete plumbing diagrams. Generate RF propagation plots for review when required. Utilize propagation tools and other RF related software such as MapInfo, ATOLL, Datapro for site candidate comparison, propagation and coverage review and selection, zoning and regulatory. Prepare necessary zoning/regulatory filings for sites ensuring that compliance is met. Attend zoning meetings for assigned area as required. Ensure 100% regulatory requirements are met in every phase of design project. Conduct RFE analysis, generate required reports and documents, and ensure 100% compliance to RFE mitigation standards within the allotted time frame. EDUCATION/CERTIFICATIONS: Bachelor's in engineering Contact: [email protected] job and many more are available through The Judge Group. Find us on the web at www.judge.com

Job DescriptionWhen you're part of Thermo Fisher Scientific, you'll do innovative work, and participate in a team that values performance, quality and innovation. As part of a successful, growing global organization you will be encouraged to perform at your best. With revenues of $30 billion and the largest investment in R&D in the industry, we give our people the resources and opportunities to make significant contributions to the world.Position Summary:As a member of the Packaging Department within Grand Island Operations, this role will support or multiple projects of varying difficulty, to develop engineer skills and gain exposure at ThermoFisher Scientific. Projects include assessing alternative packaging components, developing packaging designs to meet customer requirements, revising specifications and supporting investigations related to packaging component defects. As an Engineer I, there are some interactions with customers, sales representatives, product managers and business development professionals on current and new packaging opportunities.Responsibilities:Work independently with guidance using knowledge of current package designs, materials, industry requirements, and processes to drive revenue growth, cost savings, and efficiency gains that consider customer and plant requirements.Developing packaging knowledge through supporting senior engineers in building prototypes, testing, and validation of the developed design for customer approval and manufacturabilityDeveloping excellent follow-through both with daily workload and long-term projects, operating with guidance and support of senior engineers.Provide support with the guidance of senior engineers on packaging by working with the suppliers, procurement, and manufacturing teams.Develop technical skills, provide technical recommendations and oversight on packaging concerns by interacting with multifunctional teams.Ability to show proficiencies in and ability to apply standard packaging engineering subject matter to problem solvingBe interested in career growth and motivated by success and performance.Minimum Qualifications:B.S. in Packaging Engineering, with 0 years experience working with packaging components or demonstrated ability in a medical device or pharmaceutical manufacturing environment.The candidate must have effective time management and communication skills.Developing research, data gathering and analysis skills.Developing technical and project management skills.Preferred Qualifications:1-2 years' experience within the medical device, pharmaceutical or biotechnology industry.Have working knowledge of 3D modeling software, such as Artios or AutoCAD with the ability to read and understand technical drawings. Drawing proficiency is preferred, but not required.Relocation benefits are NOT available for this position.At Thermo Fisher Scientific, each one of our 80,000 extraordinary minds has a unique story to tell. Join us and contribute to our singular mission-enabling our customers to make the world healthier, cleaner and safer. Apply today http://jobs.thermofisher.com Thermo Fisher Scientific is an EEO/Affirmative Action Employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability or any other legally protected status.At Thermo Fisher Scientific, each one of our 80,000 extraordinary minds has a unique story to tell. Join us and contribute to our singular mission-enabling our customers to make the world healthier, cleaner and saferCompensation and BenefitsThe hourly pay range estimated for this position based in New York is $24.42-$31.40.This position may also be eligible to receive a variable annual bonus based on company, team, and/or individual performance results in accordance with company policy. We offer a comprehensive Total Rewards package that our U.S. colleagues and their families can count on, which includes:A choice of national medical and dental plans, and a national vision plan, including health incentive programsEmployee assistance and family support programs, including commuter benefits and tuition reimbursementAt least 120 hours paid time off (PTO), 10 paid holidays annually, paid parental leave (3 weeks for bonding and 8 weeks for caregiver leave), accident and life insurance, and short- and long-term disability in accordance with company policyRetirement and savings programs, such as our competitive 401(k) U.S. retirement savings planEmployees' Stock Purchase Plan (ESPP) offers eligible colleagues the opportunity to purchase company stock at a discountFor more information on our benefits, please visit: https://jobs.thermofisher.com/global/en/total-rewards

**COMPANY OVERVIEW** As the nation's largest producer of clean, carbon-free energy, Constellation is a company purposely-built to meet the challenges of the climate crisis. Constellation has been the leader in clean energy production for more than a decade and we are growing our company and capabilities. Now, we're accelerating, speeding our low-carbon or no-carbon power to more people in more places, day and night, providing our customers and communities with options to buy, manage and use energy as part of their decarbonization mission. The race is on to confront the climate crisis and Constellation is ready to meet the challenge. Come join us as we lead energy, together. **TOTAL REWARDS** Constellation offers a wide range of benefits and rewards, designed to help our employees thrive professionally and personally. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program; comprehensive medical, dental and vision benefits, including a robust wellness program; paid time off for vacation, holidays and sick days; and much more. Expected salary range of $72,000 to $80,000, varies based on experience, along with comprehensive benefits package that includes bonus and 401(k). **PRIMARY PURPOSE OF POSITION** Responsible for performing engineering and technical tasks, under direct supervision, in support of nuclear plant operations. **PRIMARY DUTIES AND ACCOUNTABILITIES** + Assure all engineering products prepared are in accordance with applicable safety analyses, industry codes, and all regulatory requirements. + Perform engineering and technical tasks as assigned by supervision. + Support engineering work functions. **MINIMUM QUALIFICATIONS** BS Degree in Engineering (Chemical, Civil/Structural, Electrical, Industrial, Mechanical or Nuclear) **PREFERRED QUALIFICATIONS** Engineer in Training CertificationConstellation is proud to be an equal opportunity employer and employees or applicants will receive consideration for employment without regard to: age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law.