Tools Engineer Salary in Connecticut, USA

Job Title Operating Engineer Job Description Summary Responsible to ensure the efficient operation and maintenance of mechanical, electrical and plumbing equipment and systems for the assigned property(s). Responsibilities include (but are not limited to) maintaining a clean and safe working environment, performing rounds, conducting routine assessments, performance of day-to-day preventive and corrective maintenance, painting, and housekeeping for assigned properties Job Description ESSENTIAL FUNCTIONS AND RESPONSIBILITIES• Perform all plumbing, electrical, or HVAC requirements of the building(s)• Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc.• Monitor and adjust all mechanical/pneumatic equipment, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings• Verify field conditions and perform any necessary repairs or adjustments• Monitor Energy Management• Repair doors, ceilings, hand railings, and floors and other general repairs, adjustments and installations about the property• Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories, etc.)• Perform preventive maintenance duties in accordance with C&W standards, building protocol, manufacturer recommendations and industry best practices. including changing filters, cleaning coils, flushing condensers, punching tubes, greasing fan, pump and motor bearings as required, inspecting and adjusting belts, replacing motor bearings, aligning pulleys and shafts, monitor condenser, chilled, heating and secondary water chemical treatment and its associated feed equipment, clean and maintain cooling towers, and perform annual inspections and other scheduled routines as directed.• Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps. Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of obstructions and debris• Check for properly operating emergency exit signs and lights and ensure free and clear access to emergency stairs and exits. Perform additional fire and life safety inspections as per NFPA and local jurisdiction, C&W standards, building protocol and as directed by superiors and property management• Document and report activities to supervisor• Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns• Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits• Complete all required C&W Safety Training as scheduled annually• Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hoursKEY COMPETENCIES• Technical Proficiency• Initiative• Flexibility• Multi-Tasking• Sense of Urgency• Knowledge of BMS & Pneumatic controlsIMPORTANT EDUCATION• High School Diploma of GED Equivalent• Graduate of apprentice program or trade school preferred• S2 certificationIMPORTANT EXPERIENCE• 5+ years of related work experience in operating mechanical, electrical, and plumbing systems in a commercial property settingADDITIONAL ELIGIBILITY QUALIFICATIONS• Appropriate license/permit for trade as may be required, i.e. Journeyman or Master Electrician License or City Licenses, such as Refrigeration Certificate of Fitness, High Pressure Boiler License, High Pressure Steam Operator, etc.)• May be required to have certification as a Universal Technician for CFC's depending on market licensure requirements• Possess and maintain a valid driver's license and good driving record with periodic checks (where applicable)• Basic Computing Skills in Outlook, Excel & Word• Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc.• Knowledgeable in energy management systems, techniques and operations.• Thorough knowledge in all building systems operations, maintenance and repair.May be only maintenance staff member on duty during certain shifts; may be required to work extended periods of time without relief when responding to priority/emergency situations (including overtime type assignments); may require shift work and/or on call dutiesWORK ENVIRONMENTThis job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Regularly required to travel outside between properties in varying weather conditions. 8AM-4:30PM ShiftPHYSICAL DEMANDSThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.• Must have ability to stoop, stand, climb, frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices• Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine• Involves movement between departments, floors, and properties to facilitate work• Ability to speak clearly so others can understand you• Ability to read and understand information presented orally and in writing• Regularly required to utilize vision abilities, allowing reading of printed material, drawings, and schematicsAAP/EEO STATEMENTC&W provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Further, the company takes affirmative action to ensure that applicants are employed and employees during employment are treated without regard to any of these characteristics. Discrimination of any type will not be tolerated.OTHER DUTIESThis job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice.Cushman & Wakefield provides equal employment opportunity. Discrimination of any type will not be tolerated. Cushman & Wakefield is an Equal Opportunity / Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or any other characteristic protected by state, federal, or local law.In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or email [email protected] . Please refer to the job title and job location when you contact us.

Are you ready to join Connecticut Innovation's vibrant community of innovators? Connecticut Innovations ("CI") is Connecticut's strategic venture capital arm, and we are passionate about serving our portfolio of 220+ companies across various industries, with strengths in life sciences, technology, and climate tech. Come join one of our quickly growing portfolio companies, Enko!At Enko we believe that to create the future the world wants, we need to change the way the world grows. Our goal is not just to create something better, but to play a part in something bigger. Enko discovers and develops novel products for farmers to protect their crops from pests and disease.Our agricultural invention platform, Enkompass™, uses A.I. and machine learning to create more effective ways of finding and selecting the right treatments for the right targets. Led by a team of proven scientists, entrepreneurs, and industry veterans, Enko's innovative science, agile design, and discovery of new modes of action is producing next-generation crop protection solutions that will overcome the critical challenges facing industry. The industry has taken notice, and we have active projects with many key industry players...with more to come!Enko is searching for a highly collaborative, solutions-oriented Software Engineer to join their quickly growing computational science team to specifically to help build unique datasets, AI models, and the infrastructure to support them.What You'll DoYour main objective will be to develop internal tools, data products, and infrastructure that will enhance the productivity of our small molecule discovery pipeline. You will be a key contributor to the direction and execution of our software infrastructure, and to making technical decisions that advance our AI and data products. You will have influence in the continued development of a culture of innovation and empowerment as a valued technical expert.This will be a hybrid role, at our HQ and research facility in Mystic, CT. The successful candidate must be very comfortable working in a fast-paced environment with demonstrated ability to juggle competing tasks and demands. This role represents a great opportunity to utilize scientific, technical, and interpersonal skills:Build software tools to support the Company's computational chemistry efforts including molecular design, chem informatics, AI-based predictive systems, simulation and virtual screening.Architect cloud infrastructure for handling large datasets and computational needs efficiently and easily.Apply expertise to enable training and validation of machine learning models using data from multiple sources, including DEL screening experiments, to rapidly and cost effectively discover and optimize chemistries.Collaborate closely across the company to explore ways to accelerate the discovery and development of novel small molecules aligned with the company's strategic goals.About YouYou hold an advanced degree in a STEM discipline.You have a minimum of 3 years of post-degree experience in a lab environment or related industry.You have previous Individual contributor experience in both data engineering and machine learning engineering for deep learning models, preferably in a scientific application.You care about building clean code and are passionate about continuous development of your technical skillset. You have previously written test scripts and SQL queries.You have experience building and maintaining scalable APIs.You possess the ability to move beyond packaged software to prototype and implement innovative ideas.You love to build relationships and have an eagerness to collaborate across disciplines and quickly learn new domain knowledge. You are inquisitive and believe that broad curiosity helps to generate process improvements. Why Work at Enko?Our products address a $70 billion core market focused on crop health with expansion into adjacent markets worth $300+ billion.We have $150 million in capitalization, with $80 million raised as part of a Series C in December 2022 Our global investors include Anterra Capital, Nufarm, the Bill & Melinda Gates Foundation, Eight Roads Ventures, Finistere Ventures, Rabo Food & Agri Innovation Fund, Novalis LifeSciences, Syngenta, TaherGozal, Germin8 Ventures, TO Ventures Food, Endeavor8, Connecticut Innovations, Silver Blue LLC, and Alumni Ventures Group.We have over 40 novel pipeline programs and 5 strategic partnerships announced, including with Syngenta and BayerOur headquarters and research facility in Mystic, CT has 90,000 square feet of state-of-the-art labs and computer-controlled greenhouses built for pre-field experimentation and scale.Enko is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

ABOUT THE TEAM Shaner Hotels has an amazing opportunity at our Residence Inn Norwalk located in beautiful downtown Norwalk. This 102-room modern Residence Inn is just a short walking distance from the trendy SoNo, which is filled with many dining, shopping, and entertainment opportunities for our guests.ABOUT US Shaner Hotel Group Shaner Hotels is one of the foremost award-winning hospitality owner-operators and management companies in the hospitality industry. Our current portfolio consists of over 65 full-service, select-service, extended-stay and resort properties with more than 7,500 rooms in 14 states and four countries. We partner with the top Hospitality Brands including independent locations as well. We provide a variety of services for investors, hotel owners and brands-including hotel development, design and construction, e-commerce, and revenue management. You can find out more by visiting our website, www.shanercorp.com!JOB DESCRIPTION Be available to work a flexible schedule, including weekends, holidays, and varied shifts, as required to meet the needs of the Company's business operations. Delegate daily work assignments and review priorities and special projects. Schedule and perform work in accordance with preventive maintenance program in rooms, coordinating with the Rooms Division Department. Ensures final inspection of all engineeringrelated work and execution of all work orders. Performs engineering staff functions whenever necessary. Ensures all safety equipment is in compliance and working order with federal quarterly/annual inspections to city, state and codes. Maintain knowledge of hotel safety procedures and ensure application of such. Handle chemicals for designated uses/surfaces, according to hotel requirements. Perform emergency equipment and machinery repair as needed. Maintain the proper use, cleaning, maintenance, and storage of all tools. Exercise safety precautions when working on equipment (use of safety signs, etc.). Maintains the engineering department's annual budget. Carries out supervisory responsibilities that includes interviewing, hiring, and training employees; planning, assigning, and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems. Responsibilities Responsible for all aspects of the Engineering department to include the proper operation, maintenance, preventive maintenance, and repair of all heating, ventilation, refrigeration, and mechanical equipment. Develop, coordinate, and monitor a maintenance program to ensure the safety, security and comfort of all staff and guests. Assigned responsibility of Safety Committee Chairperson. Supervise, train and manage all Engineering staff. Qualifications High school graduate or equivalent; college degree or vocational training a plus. Any building trade license/certificate from the state of hotel's operation preferred. Ability to satisfactorily communicate with guests, management, and co-workers to their understanding. Bilingual English/Spanish a plus. Minimum two years' experience as a hotel maintenance engineer. Supervisory experience preferred. Valid driver's license and clean driving record. Knowledge of all mechanical equipment critical to the operation of the building. Working knowledge of repair and maintenance regarding health codes; plumbing codes; plant equipment; electrical codes; architectural codes; structural codes; blueprints and wiring/plumbing schematics; building code improvement; mechanical and electrical/safety systems construction; national/local fire codes; proper chemical handling and disposal; power and hand tools, meters, etc. as it relates to the technical trades; local mechanical codes; OSHA codes and best practices. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to interpret manufacturer's literature for installation, preparation, use and upkeep of various materials and products used throughout the property. Ability to perform assigned duties with attention to detail, speed, accuracy, follow-through, courtesy, cooperativeness and work with a minimum of supervision. Ability to endure abundant physical movements in carrying out job duties. Ability to enforce hotel's standards, policies and procedures with staff. Ability to troubleshoot and use alternatives in emergency situations. Ability to handle potentially hazardous chemicals. Ability to maintain confidentiality of hotel guests and pertinent hotel information.

JOB DESCRIPTION About Us Chubb is a world leader in insurance. With operations in 54 countries, Chubb provides commercial and personal property and casualty insurance, personal accident and supplemental health insurance, reinsurance, and life insurance to a diverse group of clients. The company is distinguished by its extensive product and service offerings, broad distribution capabilities, exceptional financial strength, underwriting excellence, superior claims handling expertise and local operations globally. At Chubb, we are committed to equal employment opportunity and compliance with all laws and regulations pertaining to it. Our policy is to provide employment, training, compensation, promotion, and other conditions or opportunities of employment, without regard to race, color, religious creed, sex, gender, gender identity, gender expression, sexual orientation, marital status, national origin, ancestry, mental and physical disability, medical condition, genetic information, military and veteran status, age, and pregnancy or any other characteristic protected by law. Performance and qualifications are the only basis upon which we hire, assign, promote, compensate, develop and retain employees. Chubb prohibits all unlawful discrimination, harassment and retaliation against any individual who reports discrimination or harassment. Job Description We are seeking a highly skilled and motivated Data Engineer with experience in Master Data Management (MDM) technology to join our Global Data Engineering Organization. As a Data Engineer, the individual will be responsible for the design, development, and enrichment of our MDM solutions, ensuring accurate and reliable master data across the enterprise. The Ideal candidate should be results-oriented and has an ambition to contribute to the success of Master Data program. The successful candidate will be self-motivated, creative, and will be able to independently contribute to our MDM strategic initiative. Must have hand-on-experience with master data, ETL/ELT technologies, Azure platform & SQL. Responsibilities Design & support the MDM data architecture for large-scale data project. Collaborate with cross-functional teams to understand business requirements and design master data solution. Implement data models, define data integration workflows, and configure MDM tools to meet business needs. Create and maintain technical design documentation to ensure consistency and standardization across data platforms related to MDM solution. Develop data integration pipelines to extract, transform, and load data from various sources into the MDM system. Leverage SaaS MDM platform & adhere to design principles to enhance MDM capabilities and efficiency. Implement data stewardship processes and workflows to maintain data integrity and enforce data management policies. Perform core MDM functionalities such as Match/Merge, Survivorship, Hierarchy Management and External Match Contribute to Data Modelling & Data Management activities. Work in an Agile development environment and utilize DevOps, CI/CD (Jenkins, Jira, Terraform, Ansible etc.) processes. Must love coding - prepare to spend more than 80% of the time on hands-on development with available data technologies. Work closely with business users, data stewards, and IT teams to identify and resolve Master data-related issues. QUALIFICATIONS QualificationsABOUT US Chubb is a world leader in insurance. With operations in 54 countries, Chubb provides commercial and personal property and casualty insurance, personal accident and supplemental health insurance, reinsurance, and life insurance to a diverse group of clients. The company is distinguished by its extensive product and service offerings, broad distribution capabilities, exceptional financial strength, underwriting excellence, superior claims handling expertise and local operations globally. At Chubb, we are committed to equal employment opportunity and compliance with all laws and regulations pertaining to it. Our policy is to provide employment, training, compensation, promotion, and other conditions or opportunities of employment, without regard to race, color, religious creed, sex, gender, gender identity, gender expression, sexual orientation, marital status, national origin, ancestry, mental and physical disability, medical condition, genetic information, military and veteran status, age, and pregnancy or any other characteristic protected by law. Performance and qualifications are the only basis upon which we hire, assign, promote, compensate, develop and retain employees. Chubb prohibits all unlawful discrimination, harassment and retaliation against any individual who reports discrimination or harassment.

Triumph GroupBusiness Overview Location: West Hartford, CT, US, 06110-1328Business Unit: Systems and SupportFunction: Engineering About UsTriumph Group designs, engineers, manufactures, repairs, and overhauls a broad portfolio of aviation and industrial components, accessories, subassemblies, systems, and aircraft structures. We partner with original equipment manufacturers (OEMs) and operators of commercial, regional, business, and military aircraft worldwide, to provide products and services that solve their hardest problems. So, whatever the part, component or complexity of assembly, Triumph is committed to quality, service and meeting the specialized needs of each customer. Triumph participates at all levels of the aerospace supply chain – from single components to complex systems, to aerospace structures and their contents. We provide solutions for the entire product life cycle of an aircraft – from raw material to aftermarket service. Our unique ability to integrate a broad range of products and capabilities is our competitive advantage. Based in West Hartford CT, Triumph Systems, Electronics and Controls is a leading independent aerospace system supplier for the commercial and military helicopter and business jet markets and employs approximately 500 employees. The Company's key products and services include electronic engine controls, fuel metering units, main fuel pumps and environmental control systems for both the OE and aftermarket/spares end markets. We are rapidly growing and looking for people who feel rewarded by innovation, career growth, and making an impact and while working with state-of-the-art equipment on cutting-edge projects. If you're ready to be challenged, inspired, and supported as you pursue your professional best, we hope you'll explore a future with TRIUMPH.PositionWe have an exciting opportunity for an Obsolescence, Electronic Components & Logistics Engineer to join our West Hartford, CT team. The ideal candidate for this position should have a good technical background in Electronic Components, able to perform datasheet review and part comparison.Responsibilities•Familiar with a Product Data Management (PDM) or Product Lifecycle Management (PLM) tools,•Comfortable communicating with internal customers and team-members•Self-motivated and possess good interpersonal/team skills. •Experience with uploading/downloading, parsing, and analyzing electronic files (e.g. Excel format)•Communicate with PCB contract manufacturers, interface with Supply Chain, Purchasing, Project and Electronics Design; generate ‘Where Used' reports, and accurately track inventory and life-cycle data. Desired Knowledge, Skills & Abilities: •Technical oDatasheet Review (component parametrics, AEC-Qualifications, GiDEP, PCNs) oAnalysis Tools (Excel) oInventory Management Tools oDocumentation Tools (MS Word/PowerPoint, Visio, Adobe, Nuance)•Non-Technical oSchedule Tracking (MS Project) oInternet (SharePoint, Intranet)Qualifications•Minimum of a Bachelors' Degree in Electrical Engineering. Associates Degree may be considered•More than 2-years of relevant Electronics Engineering, Component Selection or Avionics Design experience. •Familiarity with Silicon Expert, IHS, CAPSEXPERT, DIGIKEY, FINDCHIPS, OCTOPART or other similar EDA search tools•Familiarity with Omnify Empower PLM tools preferred•Excellent written and verbal skills.•Able to work independently or across teams.Benefits•Comprehensive medical, dental and vision coverage with plan options that provide flexibility and choice (including telehealth options)•Healthcare spending accounts•Paid parental leave•Paid/flexible time off in addition to paid company holidays•401(k) with company match•Employee Stock Purchase Plan•Disability and life insurance•Incentives and performance-based rewards•Exciting growth and development opportunities empowered by our TRIUMPH Transformation and an entrepreneurial environment that encourages innovation and creativityVision and MissionOur Vision:As one team, we enable the safety and prosperity of the world. Our Mission:We partner with our Customers to TRIUMPH over their hardest aerospace, defense, and industrial challenges to deliver value to our stakeholders. Our Values:1.Integrity – Do the right thing for our stakeholders. We value safety, diversity, and respect.2.Teamwork – Win as One team-one company. Solicit help and assist others.3.Continuous Improvement – Pursue zero defect quality. Attack problems and relentlessly raise the bar.4.Innovation – Passion for growing the business. Lead through ingenuity and entrepreneurship.5.Act with Velocity – Partner, anticipate and communicate. Proactively solve problems.Physical Demands The work environment characteristics and physical demands described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, talk, or hear. The employee frequently is required to stand, walk, and use hands to finger, handle, or feel objects, tools, or controls. The employee is occasionally required to reach with hands and arms: stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 30 pounds. EHSEmployees are responsible for the Health, Safety, and Welfare of themselves, the environment, and other people. All employees must comply with EHS policy training and instructions, help to maintain a safe and clean working environment, and use any Personal Protective Equipment (PPE) provided by the Company. Employees must report any accidents, incidents, and near misses to management. Additionally, employees are expected to notify management of any dangerous or potentially dangerous situations or practices.Code of ConductTo perform the job successfully, an individual should demonstrate the TRIUMPH behaviors captured within our core values: Integrity, Teamwork, Continuous Improvement, Innovation, and Act with Velocity. Detailed definitions are below and performance metrics for each behavior can be found on our intranet and is embedded within our Performance Management processes. All employees are expected to represent the values and maintain the standards contained in TRIUMPH's Code of Conduct. Pursuant to International Traffic Arms Regulations (ITAR) and the Export Administration Regulations (EAR), applicants for SELECT positions will be required to provide proof of U.S. Citizenship, U.S. Permanent Residence, or U.S. Immigration Status in order to meet the minimum qualifications for those select positions. All inquiries related to citizenship are asked solely to comply with ITAR and EAR export licensing requirements. Legally authorized to work in the United States without company sponsorship. Triumph Group and all its divisions and subsidiaries are Equal Opportunity/Affirmative Action Employers. Triumph Group provides reasonable accommodation for individuals protected by Section 503 of the Rehabilitation Act of 1973, the Vietnam Era Veterans' Readjustment Assistance Act of 1974 and Title I of the Americans with Disabilities Act of 1990. Applicants who need accommodation in the job application process should [email protected] request assistance. Include the title of the position and location in the subject line of your email so we may direct your email to the appropriate person. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to."An Equal Opportunity Employer - Minorities/Females/Disabled/Veterans" We are an Equal Opportunity Employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, or any other characteristic protected by law. Pursuant to International Traffic Arms Regulations (ITAR) and the Export Administration Regulations (EAR), applicants for SELECT positions will be required to provide proof of U.S. Citizenship, U.S. Permanent Residence, or U.S. Immigration Status in order to meet the minimum qualifications for those select positions. All inquiries related to citizenship are asked solely to comply with ITAR and EAR export licensing requirements.The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c).PI239960792

This is what you will do: This position will lead research, design and implement scientific studies to enable the drug product (DP) process development, characterization, clinical manufacturing, and commercial validation of parenteral/injectable biologic products. Lead and support execution of stability studies, data processing, compiling and presentation of results supporting late-stage clinical activities as well as preparation for PPQ. Develop a variety of manufacturing unit operations including, drug substance (DS) freeze/thaw, compounding/mixing, sterile filtration, drug product filling of vials/syringes, visual inspection, and DS/DP transportation. A general understanding of protein chemistry and/or the ability to run biopharmaceutical assays in a laboratory is preferred.The role will lead manufacturing technology transfer activities in preparation for DS and DP PPQs, sending/receiving site process gap analysis, process FMEAs (failure mode and effects analysis), change control owner/leader, master batch record review, as well as leading at-scale/full scale process development studies, and authoring protocols, and reports. In addition, will support deviation investigations, change controls, and CAPAs using electronic Quality system. The candidate will also provide clinical and commercial manufacturing site support including but not limited to periodic meetings, action item owner, and in-person on-site manufacturing support. Interact regularly with multi-functional staff from Analytical Sciences & Quality Control, Drug Substance Process Development, Manufacturing Technical Services, Quality Assurance, and/or CMC Regulatory Affairs to support progress of the program and preparation of source documentation supporting BLA.You will be responsible for: Own the design and implement studies for Alexion pharmaceuticals' clinical drug candidates and commercial products, support tech transfer activities for internal manufacturing and contract manufacturing sitesLead progression of projects with multi-functional collaborators, as well as understand the implications of project activities and decisions with minimal directionPrioritizing multiple tasks and projects independently and as part of the teamAuthor SOPs, study protocols and technical reportsParticipate in multi-functional development teams representing Injectable Drug Product DevelopmentMaintain knowledge of current trends in drug product manufacturing processes, manufacturing equipment and single use systems as well as associated global regulatory expectations and scientific principles and theories. Train other peers as assigned in areas of expertiseActively participate in department and team meetings including assuming ownership and delivering on assign action itemsDevelop presentations for meetings with internal and external partnersYou will need to have:Bachelor's degree in Chemical Engineering, Chemistry, Biochemistry, Pharmaceutical Sciences, or relevant Engineering/Life Sciences field with 4+ years of relevant experience or Master's degree with 3+ years of relevant work experienceDedicated initiative to find resolution for technical challengesExcellent interpersonal, collaborative and communication skillsThe duties of this role are conducted in a lab environment. As is typical of a lab-based role, employees must be able, with or without an accommodation to: lift/carry 15/30 pounds unassisted/assisted; work comfortably in a controlled environment with and around biological, infectious and hazardous materials; gown/degown PPE; use a computer; engage in communications via phone, video and electronic messaging; engage in problem solving and non-linear thought, analysis and dialogue; collaborate with others; maintain general availability during standard business hours.We would prefer for you to have:Scientific and practical knowledge of protein biochemistry and/or drug product process developmentPrevious experience in bio-therapeutics development as well as relevant knowledge of cGMP and Quality expectations for PPQs and BLAScientific understanding of protein stability, thermodynamics, mechanism of protein degradation, bio-therapeutics drug formulation development and analytical tools used to test formulations is a plusHigh level proficiency in MS Office software including Word, Excel, Outlook, Visio, and PowerPointExpectation of working in the office 4 days a week statement: When we put unexpected teams in the same room, we unleash bold thinking with the power to inspire life-changing medicines. In-person working give us the platform we need to connect, work at pace and challenge perceptions. That's why we work, on average, a minimum of four days per week from the office. But that doesn't mean we're not flexible. We balance the expectation of being in the office while respecting individual flexibility. Join us in our unique and ambitious world!AstraZeneca embraces diversity and equality of opportunity. We are committed to building an inclusive and diverse team representing all backgrounds, with as wide a range of perspectives as possible, and harnessing industry-leading skills. We believe that the more inclusive we are, the better our work will be. We welcome and consider applications to join our team from all qualified candidates, regardless of their characteristics. We comply with all applicable laws and regulations on non-discrimination in employment (and recruitment), as well as work authorization and employment eligibility verification requirements.

This is what you will do: This position will lead research, design and implement scientific studies to enable the drug product (DP) process development, characterization, clinical manufacturing, and commercial validation of parenteral/injectable biologic products. Lead and support execution of stability studies, data processing, compiling and presentation of results supporting late-stage clinical activities as well as preparation for PPQ. Develop a variety of manufacturing unit operations including, drug substance (DS) freeze/thaw, compounding/mixing, sterile filtration, drug product filling of vials/syringes, visual inspection, and DS/DP transportation. A general understanding of protein chemistry and/or the ability to run biopharmaceutical assays in a laboratory is preferred.The role will lead manufacturing technology transfer activities in preparation for DS and DP PPQs, sending/receiving site process gap analysis, process FMEAs (failure mode and effects analysis), change control owner/leader, master batch record review, as well as leading at-scale/full scale process development studies, and authoring protocols, and reports. In addition, will support deviation investigations, change controls, and CAPAs using electronic Quality system. The candidate will also provide clinical and commercial manufacturing site support including but not limited to periodic meetings, action item owner, and in-person on-site manufacturing support. Interact regularly with multi-functional staff from Analytical Sciences & Quality Control, Drug Substance Process Development, Manufacturing Technical Services, Quality Assurance, and/or CMC Regulatory Affairs to support progress of the program and preparation of source documentation supporting BLA.You will be responsible for: Own the design and implement studies for Alexion pharmaceuticals' clinical drug candidates and commercial products, support tech transfer activities for internal manufacturing and contract manufacturing sitesLead progression of projects with multi-functional collaborators, as well as understand the implications of project activities and decisions with minimal directionPrioritizing multiple tasks and projects independently and as part of the teamAuthor SOPs, study protocols and technical reportsParticipate in multi-functional development teams representing Injectable Drug Product DevelopmentMaintain knowledge of current trends in drug product manufacturing processes, manufacturing equipment and single use systems as well as associated global regulatory expectations and scientific principles and theories. Train other peers as assigned in areas of expertiseActively participate in department and team meetings including assuming ownership and delivering on assign action itemsDevelop presentations for meetings with internal and external partnersYou will need to have:Bachelor's degree in Chemical Engineering, Chemistry, Biochemistry, Pharmaceutical Sciences, or relevant Engineering/Life Sciences field with 4+ years of relevant experience or Master's degree with 3+ years of relevant work experienceDedicated initiative to find resolution for technical challengesExcellent interpersonal, collaborative and communication skillsThe duties of this role are conducted in a lab environment. As is typical of a lab-based role, employees must be able, with or without an accommodation to: lift/carry 15/30 pounds unassisted/assisted; work comfortably in a controlled environment with and around biological, infectious and hazardous materials; gown/degown PPE; use a computer; engage in communications via phone, video and electronic messaging; engage in problem solving and non-linear thought, analysis and dialogue; collaborate with others; maintain general availability during standard business hours.We would prefer for you to have:Scientific and practical knowledge of protein biochemistry and/or drug product process developmentPrevious experience in bio-therapeutics development as well as relevant knowledge of cGMP and Quality expectations for PPQs and BLAScientific understanding of protein stability, thermodynamics, mechanism of protein degradation, bio-therapeutics drug formulation development and analytical tools used to test formulations is a plusHigh level proficiency in MS Office software including Word, Excel, Outlook, Visio, and PowerPointExpectation of working in the office 4 days a week statement: When we put unexpected teams in the same room, we unleash bold thinking with the power to inspire life-changing medicines. In-person working give us the platform we need to connect, work at pace and challenge perceptions. That's why we work, on average, a minimum of four days per week from the office. But that doesn't mean we're not flexible. We balance the expectation of being in the office while respecting individual flexibility. Join us in our unique and ambitious world!Date Posted26-Apr-2024Closing Date30-Jul-2024Alexion is proud to be an Equal Employment Opportunity and Affirmative Action employer. We are committed to fostering a culture of belonging where every single person can belong because of their uniqueness. The Company will not make decisions about employment, training, compensation, promotion, and other terms and conditions of employment based on race, color, religion, creed or lack thereof, sex, sexual orientation, age, ancestry, national origin, ethnicity, citizenship status, marital status, pregnancy, (including childbirth, breastfeeding, or related medical conditions), parental status (including adoption or surrogacy), military status, protected veteran status, disability, medical condition, gender identity or expression, genetic information, mental illness or other characteristics protected by law. Alexion provides reasonable accommodations to meet the needs of candidates and employees. To begin an interactive dialogue with Alexion regarding an accommodation, please contact [email protected]. Alexion participates in E-Verify.AstraZeneca requires all US employees to be fully vaccinated for COVID-19 but will consider requests for reasonable accommodations as required by applicable law.

This is what you will do: This position is responsible for leading research, design and execute scientific studies to enable the drug product (DP) process development, characterization, clinical manufacturing, and commercial validation of parenteral/injectable biologic products. Lead and support execution of stability studies, data processing, compiling and presentation of results supporting late-stage clinical activities as well as preparation for PPQ. The candidate will support the development of a variety of manufacturing unit operations including, but not limited to, drug substance (DS) freeze/thaw, compounding/mixing, sterile filtration, drug product filling of vials/syringes, visual inspection, and DS/DP transportation. A general understanding of protein chemistry and/or the ability to run biopharmaceutical assays in a laboratory is preferred. The role will lead manufacturing technology transfer activities in preparation for DS and DP PPQs, including but not limited to sending/receiving site process gap analysis, process FMEAs (failure mode and effects analysis), change control owner/leader, master batch record review, as well as leading at-scale/full scale process development studies, and authoring protocols, and reports. In addition, the candidate will support deviation investigations, change controls, and CAPAs utilizing electronic Quality system. The candidate will also provide clinical and commercial manufacturing site support including but not limited to periodic meetings, action item owner, and as necessary in-person on-site manufacturing support. This position is expected to interact regularly with cross-functional staff from Analytical Sciences & Quality Control, Drug Substance Process Development, Manufacturing Technical Services, Quality Assurance, and/or CMC Regulatory Affairs to support progress of the program and preparation of source documentation supporting BLA. You will be responsible for: Lead the design and execute studies for Alexion pharmaceuticals' clinical drug candidates and commercial products, support tech transfer activities for internal manufacturing and contract manufacturing sites Lead progression of projects with cross functional stakeholders, as well as understand the cross functional implication of project activities and decisions with minimal supervision Prioritizing multiple assigned tasks and projects independently and as part of the team Contribute to the development of strategic project plans for molecules in clinical development Author SOPs, study protocols and technical reports with minimal supervision Participate in cross-functional development teams representing Injectable Drug Product Development Maintain knowledge of current trends in drug product manufacturing processes, manufacturing equipment and single use systems as well as associated global regulatory expectations and scientific principles and theories. Actively participate in department and team meetings including assuming ownership and delivering on assign action items Develop presentations for meetings with internal and external stakeholders with minimal supervision Mentor and train junior Associate Scientists and Engineers regarding drug product development You will need to have: Bachelor's degree in Chemical Engineering, Chemistry, Biochemistry, Pharmaceutical Sciences, or relevant Engineering/Life Sciences field with 7+ years of relevant experience or Master's degree with 6+ years of relevant work experience Self-driven initiative to find resolution for technical challenges Excellent interpersonal, collaborative and communication skills The duties of this role are generally conducted in a lab environment. As is typical of a lab-based role, employees must be able, with or without an accommodation to: lift/carry 15/30 pounds unassisted/assisted; work comfortably in a controlled environment with and around biological, infectious and hazardous materials; gown/degown PPE; use a computer; engage in communications via phone, video and electronic messaging; engage in problem solving and non-linear thought, analysis and dialogue; collaborate with others; maintain general availability during standard business hours. We would prefer for you to have: Scientific and practical knowledge of protein biochemistry and/or drug product process development is preferred Previous experience in biotherapeutics development as well as relevant knowledge of cGMP and Quality expectations for PPQs and BLA is preferred Scientific understanding of protein stability, thermodynamics, mechanism of protein degradation, biotherapeutics drug formulation development and analytical tools used to test formulations is a plus High level proficiency in MS Office software including Word, Excel, Outlook, Visio, and PowerPoint In-person statement for 4 days in the office:When we put unexpected teams in the same room, we unleash bold thinking with the power to inspire life-changing medicines. In-person working give us the platform we need to connect, work at pace and challenge perceptions. That's why we work, on average, a minimum of four days per week from the office. But that doesn't mean we're not flexible. We balance the expectation of being in the office while respecting individual flexibility. Join us in our unique and ambitious world. AstraZeneca embraces diversity and equality of opportunity. We are committed to building an inclusive and diverse team representing all backgrounds, with as wide a range of perspectives as possible, and harnessing industry-leading skills. We believe that the more inclusive we are, the better our work will be. We welcome and consider applications to join our team from all qualified candidates, regardless of their characteristics. We comply with all applicable laws and regulations on non-discrimination in employment (and recruitment), as well as work authorization and employment eligibility verification requirements.

Locations: VA - McLean, United States of America, McLean, VirginiaAppSec EngineerAbout the JobDo you enjoy seeing the impact your work has on real customers? As a Security Engineer at Capital One, you'll help create, maintain, and improve applications and solutions at massive scale, helping to not only improve the security of applications for millions of people around the world, but also greatly reducing risk for Capital One. As a member of the Application Security team, you'll be part of the process that contributes to securing, validating and sustaining Capital One products, which millions of customers across the world use on a daily basis. Whether you are validating that our services, applications and websites are designed and implemented to the highest security standards, you will be part of a development ecosystem at Capital One which is unlike any other in our industry.Capital One Application Security is on the cutting edge of many security issues for a wide variety of platforms and technologies including cloud applications, mobile devices and APIs, all operating at massive scale. Similarly, our highly collaborative team is committed to each team member's growth as our business grows.The Capital One Application Security team is looking for an Application Security Engineer to help validate that our services, applications and websites are designed and implemented to the highest security standards. You will be responsible for analyzing the security of applications and services, discovering and addressing security issues, building security automation and quickly reacting to new threat scenarios. You will have the opportunity to learn from, and be mentored by, those who are building and securing our cutting-edge applications.An Application Security Engineer at Capital One is expected to be strong in multiple domains and provide significant contributions to the Capital One Security team. Security engineers are expected to develop solutions and apply appropriate decision making to complex business problems, all while adhering to security engineering best practices. In addition, an Application Security Engineer must foster constructive dialogue and seek resolution when confronted with discordant views. Engineers in this role are expected to participate fully in the planning of the team's work and constantly seek opportunities for process improvements. A successful candidate will need a combination of troubleshooting, technical, and communication skills, as well as the ability to handle a mix of tasks which may include project and software development work. This role will provide career growth opportunities as you gain new security skills in the course of your duties.Key job responsibilities:API and web application security reviewsMobile application security reviewsProjects and research work as neededSecurity training and outreach to internal development teamsSecurity guidance documentationSecurity tool developmentSecurity metrics delivery and improvementsAssistance with recruiting activities and administrative workBasic Qualifications:High School Diploma, GED or equivalent certificationAt least 4 years of experience with dynamic application security, web, API or mobile security, secure coding, or software development or a combination ofAt least 4 years of experience with security engineering or application securityPreferred Qualifications:Bachelor's Degree in Computer Science2+ years experience testing APIs, web and mobile applications2+ years experience with multiple programming languages (Java, Python, Perl, etc.)The minimum and maximum full-time annual salaries for this role are listed below, by location. Please note that this salary information is solely for candidates hired to perform work within one of these locations, and refers to the amount Capital One is willing to pay at the time of this posting. Salaries for part-time roles will be prorated based upon the agreed upon number of hours to be regularly worked.New York City (Hybrid On-Site): $165,100 - $188,500 for Prin Assoc, Cyber TechnicalCandidates hired to work in other locations will be subject to the pay range associated with that location, and the actual annualized salary amount offered to any candidate at the time of hire will be reflected solely in the candidate's offer letter.This role is also eligible to earn performance based incentive compensation, which may include cash bonus(es) and/or long term incentives (LTI). Incentives could be discretionary or non discretionary depending on the plan.Capital One offers a comprehensive, competitive, and inclusive set of health, financial and other benefits that support your total well-being. Learn more at the Capital One Careers website. Eligibility varies based on full or part-time status, exempt or non-exempt status, and management level.This role is expected to accept applications for a minimum of 5 business days.No agencies please. Capital One is an equal opportunity employer committed to diversity and inclusion in the workplace. All qualified applicants will receive consideration for employment without regard to sex (including pregnancy, childbirth or related medical conditions), race, color, age, national origin, religion, disability, genetic information, marital status, sexual orientation, gender identity, gender reassignment, citizenship, immigration status, protected veteran status, or any other basis prohibited under applicable federal, state or local law. Capital One promotes a drug-free workplace. Capital One will consider for employment qualified applicants with a criminal history in a manner consistent with the requirements of applicable laws regarding criminal background inquiries, including, to the extent applicable, Article 23-A of the New York Correction Law; San Francisco, California Police Code Article 49, Sections 4901-4920; New York City's Fair Chance Act; Philadelphia's Fair Criminal Records Screening Act; and other applicable federal, state, and local laws and regulations regarding criminal background inquiries.If you have visited our website in search of information on employment opportunities or to apply for a position, and you require an accommodation, please contact Capital One Recruiting at 1-800-304-9102 or via email at [email protected]. All information you provide will be kept confidential and will be used only to the extent required to provide needed reasonable accommodations.For technical support or questions about Capital One's recruiting process, please send an email to [email protected] One does not provide, endorse nor guarantee and is not liable for third-party products, services, educational tools or other information available through this site.Capital One Financial is made up of several different entities. Please note that any position posted in Canada is for Capital One Canada, any position posted in the United Kingdom is for Capital One Europe and any position posted in the Philippines is for Capital One Philippines Service Corp. (COPSSC).

Locations: VA - McLean, United States of America, McLean, VirginiaAppSec EngineerAbout the JobDo you enjoy seeing the impact your work has on real customers? As a Security Engineer at Capital One, you'll help create, maintain, and improve applications and solutions at massive scale, helping to not only improve the security of applications for millions of people around the world, but also greatly reducing risk for Capital One. As a member of the Application Security team, you'll be part of the process that contributes to securing, validating and sustaining Capital One products, which millions of customers across the world use on a daily basis. Whether you are validating that our services, applications and websites are designed and implemented to the highest security standards, you will be part of a development ecosystem at Capital One which is unlike any other in our industry.Capital One Application Security is on the cutting edge of many security issues for a wide variety of platforms and technologies including cloud applications, mobile devices and APIs, all operating at massive scale. Similarly, our highly collaborative team is committed to each team member's growth as our business grows.The Capital One Application Security team is looking for an Application Security Engineer to help validate that our services, applications and websites are designed and implemented to the highest security standards. You will be responsible for analyzing the security of applications and services, discovering and addressing security issues, building security automation and quickly reacting to new threat scenarios. You will have the opportunity to learn from, and be mentored by, those who are building and securing our cutting-edge applications.An Application Security Engineer at Capital One is expected to be strong in multiple domains and provide significant contributions to the Capital One Security team. Security engineers are expected to develop solutions and apply appropriate decision making to complex business problems, all while adhering to security engineering best practices. In addition, an Application Security Engineer must foster constructive dialogue and seek resolution when confronted with discordant views. Engineers in this role are expected to participate fully in the planning of the team's work and constantly seek opportunities for process improvements. A successful candidate will need a combination of troubleshooting, technical, and communication skills, as well as the ability to handle a mix of tasks which may include project and software development work. This role will provide career growth opportunities as you gain new security skills in the course of your duties.Key job responsibilities:API and web application security reviewsMobile application security reviewsProjects and research work as neededSecurity training and outreach to internal development teamsSecurity guidance documentationSecurity tool developmentSecurity metrics delivery and improvementsAssistance with recruiting activities and administrative workBasic Qualifications:High School Diploma, GED or equivalent certificationAt least 4 years of experience with dynamic application security, web, API or mobile security, secure coding, or software development or a combination ofAt least 4 years of experience with security engineering or application securityPreferred Qualifications:Bachelor's Degree in Computer Science2+ years experience testing APIs, web and mobile applications2+ years experience with multiple programming languages (Java, Python, Perl, etc.)The minimum and maximum full-time annual salaries for this role are listed below, by location. Please note that this salary information is solely for candidates hired to perform work within one of these locations, and refers to the amount Capital One is willing to pay at the time of this posting. Salaries for part-time roles will be prorated based upon the agreed upon number of hours to be regularly worked.New York City (Hybrid On-Site): $165,100 - $188,500 for Prin Assoc, Cyber TechnicalCandidates hired to work in other locations will be subject to the pay range associated with that location, and the actual annualized salary amount offered to any candidate at the time of hire will be reflected solely in the candidate's offer letter.This role is also eligible to earn performance based incentive compensation, which may include cash bonus(es) and/or long term incentives (LTI). Incentives could be discretionary or non discretionary depending on the plan.Capital One offers a comprehensive, competitive, and inclusive set of health, financial and other benefits that support your total well-being. Learn more at the Capital One Careers website. Eligibility varies based on full or part-time status, exempt or non-exempt status, and management level.This role is expected to accept applications for a minimum of 5 business days.No agencies please. Capital One is an equal opportunity employer committed to diversity and inclusion in the workplace. All qualified applicants will receive consideration for employment without regard to sex (including pregnancy, childbirth or related medical conditions), race, color, age, national origin, religion, disability, genetic information, marital status, sexual orientation, gender identity, gender reassignment, citizenship, immigration status, protected veteran status, or any other basis prohibited under applicable federal, state or local law. Capital One promotes a drug-free workplace. Capital One will consider for employment qualified applicants with a criminal history in a manner consistent with the requirements of applicable laws regarding criminal background inquiries, including, to the extent applicable, Article 23-A of the New York Correction Law; San Francisco, California Police Code Article 49, Sections 4901-4920; New York City's Fair Chance Act; Philadelphia's Fair Criminal Records Screening Act; and other applicable federal, state, and local laws and regulations regarding criminal background inquiries.If you have visited our website in search of information on employment opportunities or to apply for a position, and you require an accommodation, please contact Capital One Recruiting at 1-800-304-9102 or via email at [email protected]. All information you provide will be kept confidential and will be used only to the extent required to provide needed reasonable accommodations.For technical support or questions about Capital One's recruiting process, please send an email to [email protected] One does not provide, endorse nor guarantee and is not liable for third-party products, services, educational tools or other information available through this site.Capital One Financial is made up of several different entities. Please note that any position posted in Canada is for Capital One Canada, any position posted in the United Kingdom is for Capital One Europe and any position posted in the Philippines is for Capital One Philippines Service Corp. (COPSSC).