Materials Engineer Salary in San Antonio, TX

Who We Are: Our team has expertise in Design Engineering, Procurement, and construction of various scale pilot plants. Come join us! Objectives of this Role: This position will fill a role in supporting design, build, commissioning, and operations of pilot plants by designing, implementing, installing, testing, and troubleshooting process control systems and instrumentationBe a leader in training, procurement, and inventory control for process controls and instrumentation of pilot plants, with expertise in technical areas of the research (electrification, etc).Train technicians and engineers to maintain pilot plant area and operations with a high degree of technical success.Emphasis on department safety culture, waste disposal, procedures, ISO.Increased utilization by supporting existing large projects and conducting business development for existing and new areas.Conduct strategic business development activities.Daily and Monthly Responsibilities: Design, implement, install, test, and troubleshooting process control systems and instrumentation for pilot plants and unit operations for chemical or refinery systems.Plan and conduct research and process development work in chemical, gas, and petroleum areas.Support facility turnarounds, including scope development, planning, reviews, material selection and execution of work scopes, operator training, procedure development, laboratory upkeep, maintenance, and safety review/document preparation.Department safety emphasis.Provide technical assistance/troubleshooting assistance in resolving instrument operations and maintenance problems.Communicate with vendors, clients, and operators to set up equipment and construct systems for new processes.Promote and secure new work as trained through mentorship and internal business development training.Provide technical supervision to other engineers, technicians, and analysts. Emphasis on proposal writing and publications.Requirements: Requires a Bachelors or a Masters in Electrical Engineering, Mechanical Engineering, and other related Engineering disciplines with related experienceShift work required.1-3 years: Experience as a process controls/instrumentation engineer in the pilot plant fabrication and operation, refining, or petrochemical industries, computer skills, virtual meeting platforms, Word, and related.High attention to detail in calculations, design, and operations.Must be able to understand process flow diagrams, process and instrumentation diagrams, I/O diagrams, and process control strategies.Must be able to develop electrical drawings and wiring diagrams.1-3 years: Must be able to communicate clearly and interface with clients or potential clients as needed in the course of the project or proposal process.Must be able to conduct tasks in parallel.Experience with actual hands-on operations of processes and test systems is preferred.Experience Designing electrical systems, drawingwiring diagrams, and interpreting piping and instrumentation diagrams; instrumentation and AC/DC power equipment.Experience troubleshooting and resolving design challenges.A valid/clear driver's license is required Special Requirements: Must be a U.S. person (i.e., U.S. citizen, non-U.S. citizen national, lawful permanent resident, asylee, or refugee) due to ITAR work in section. Job Locations: San Antonio, Texas For more information about this division, visit the Chemistry & Chemical Engineering home page. For benefits information at our San Antonio location, click here. For benefits information at all other locations, click here. An Equal Employment Opportunity/Affirmative Action Employer Race/Color/Religion/Sex/Sexual Orientation/Gender Identity/National Origin/Disabled/Veteran Committed to Diversity in the Workplace

Who We Are: We develop and apply advanced computational methods to investigate the performance of a variety of engineering materials that are used in a wide range of applications, especially estimating the life and reliability of high-consequence engineering applications. Objectives of this Role: Join our team to perform fundamental and applied research through the development of advanced fatigue crack growth lifing methods for material and structural integrity assessments.Participate in individual and collaborative research projects that deal with applications in aerospace, engine, and manufacturing sectors.Apply principles in advanced engineering mechanics, materials science, uncertainty quantification, and applied mathematics to solve unique problems.Learn business development skills to support contract research programs.Interact with commercial and government clients.Daily and Monthly Responsibilities: Develop, test, implement, integrate, and document numerical algorithms for structural integrity and life prediction in user-friendly software: NASGRO® and DARWIN®.Ensure accuracy, precision, and consistency of predictions implemented within high-criticality commercial software.Solve fracture mechanics problems by solid continuum mechanics with finite element analysis.Build large solution ensembles in Abaqus using Python scripting capabilities.Utilize principles from computational geometry to discretize components.Write reports and manuals to document results and to provide guidance for software use.Communicate effectively with colleagues, collaborators, and customers. Resolve user issues encountered during usage.Prepare proposals, reports, and technical papers.Manage tasks and projects to completion within scope, budget, and schedule constraints within a team environment.Work independently with relatively little supervision and function effectively as a part of project teams.Provide specialist support to ensure material integrity and structural performance for projects focused on advanced applications in various sectors.Qualify materials and certify components using modeling, simulation, and other tools per best practices.Requirements: Requires a Masters or a PhD in Mechanical Engineering, Materials Science Engineering, Engineering Mechanics, Civil Engineering, or similar engineering degree.0-5 years: Must have experience and/or training in fracture mechanics, fatigue, finite element analysis, solid continuum mechanics, probabilistic methods, mechanical behavior of engineering metals, materials science, and software development.0-5 years: Must have experience using solid mechanics and finite element analysis to solve problems related to structural integrity at the component scale. Experience with ABAQUS, Fortran, Python, and formal software development processes is highly desirable.0-5 years: Experience with recent computational integrity techniques in materials science is desirable, including crystal plasticity, fatigue initiation mechanisms, reduced-order modeling, and physics informed AI/ML.0-5 years: Experience with recent advances in computational mechanics targeted towards structural applications is desirable, including contact algorithms, constitutive modeling, multi-physics, meshing algorithms, enriched methods, and automatic crack growth.A valid/clear driver's license is required Special Requirements: Must be a U.S. person (i.e., U.S. citizen, non-U.S. citizen national, lawful permanent resident, asylee, or refugee) due to ITAR work in section. Job Locations: San Antonio, Texas For more information about this division, visit the Mechanical Engineering home page. For benefits information at our San Antonio location, click here. For benefits information at all other locations, click here. An Equal Employment Opportunity/Affirmative Action Employer Race/Color/Religion/Sex/Sexual Orientation/Gender Identity/National Origin/Disabled/Veteran Committed to Diversity in the Workplace

Position Summary: Engineer with mechanical design experience, highly investigative mind inclined toward developing practical solutions for semi - automated production equipment to improve manufacturing productivity. The successful candidate should have proven machine design experience with highspeed pick and place automation integrated with PLC logic controllers. Future assignments related to machine safety, reliability, ergonomics, and product development to be determined and assigned once short-term goals completed. Plans and oversees utilization of production facilities and personnel in departments or other subdivisions of an industrial establishment. Responsible for complex planning activities for equipment layouts in plant, office, and production facilities. Conducts studies to determine the most efficient sequence of operations and workflow and recommends methods for maximum utilization of production facilities and personnel. Prepares cost estimates for proposed projects and evaluates cost factors. Primary Accountabilities (Essential Duties): Study existing equipment and develop strategies for improving upon current designs. Conduct elementary design calculations for machine like Pneumatics or hydraulics, statics, and power transmission etc. Provide exact estimates of time and costs needed to finish assigned work. Successfully implement all project goals rigorously executing Project Management processes. Comply with Total Quality Principles related with machine design. Prepare drawings, designs and parameters for machines and related parts. Calculate cost estimates for final product designs, and release reports to supervisors, incorporating costs of labor, material, delivery Execute material and cost estimates, project schedules along with reports. Design products using CAD and consult with engineering and manufacturing teammates to ensure that designs are feasible. Record and evaluate designs as necessary to bring them to safety, performance, and efficiency standards. Ensure all machine drawings adhere to customer's machine standards of drafting. Interact with suppliers for commercial components final selection and write purchase requisitions. Develop molds, dies, tools, fixtures, and jigs to be used in manufacturing process. Plan/develop layouts new machines, plants, equipment, and tool designs to provide maximum possible operating efficiency. Ensure to follow equipment construction based on plants capabilities. Interact with suppliers for commercial components final selection and write purchase requisitions. Develop molds, dies, tools, fixtures, and jigs to be used in manufacturing process. Develop layouts new machines, plants, equipment, and tool designs. Ensure to follow equipment construction based on plants capabilities. Assemble entire machine design packages and costed Bill of Materials, check drawings' accuracy, add detail till merge drawings as required. Consult with fabrication teams during product manufacturing, advising them on design specifications and providing physical assistance when required Develop and build the equipment with the maintenance team and run tests to measure performance and reliability of designs. Measures and studies available floor space and draws plan of floor space to scale, using drafting tools or computer-assisted design/drafting equipment. May develop management systems for cost analysis, financial planning, wage and salary administration, and job evaluation. Attend weekly team meetings to provide progress reports, obtain updates on colleagues' progress, strategize on steps for following week and acquire information about projected emerging product lines. Train plant maintenance and operations personnel. Working with Maintenance Manager to accomplish short- and long-term company goals. Other duties as assigned. Education/Experience Bachelor's degree and three years of experience in an Engineering capacity. Experience with highspeed metal roll forming equipment is a plus. Excellent communication skills with individuals at all levels both verbal and written. Advanced computer skills. Position Qualifications: To perform this job successfully, an individual must be able to perform each primary accountability satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Additionally, the physical demands and the work environment typically encountered are listed below. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties. Education / Experience: (an equivalent combination of education and experience required to successfully complete the primary accountabilities is indicated below) Degree: Bachelor's degree Major: Mechanical or Industrial Engineering Years of Experience: 3 Area: Engineering/ Lean manufacturing Competencies / Technical Skills: Core Competencies: Excellent communication skills, Multi-Tasking skills, Attention to detail, Quick thinking, Responsiveness, Decision-making, Develops relationships, Problem-solving, Drive for results, Analysis & Problem solving, Adaptability & Change Management, Personal credibility, Analytical thinking, Active listening, Conflict resolution, Dependability, Empathy, Friendliness, Integrity, Resilience, Knowledge of your product or service, Leadership, and Builds collaborative relationships with peers. Organizational Competencies: Continuous improvement, Superior customer service, Continuous learning, Active listening & understanding, Attention to detail, Steadfast ethics & integrity, All-in teamwork, Open & inclusive decision making, Creative problem solving, Humble & authentic, Growth mindset, and Broad perspective. Technical Skills: Proficient in Microsoft Office applications such as excel and word. Able to read calipers, micrometers, tape measures. Licenses / Certifications: EIT or PE status preferred. Physical Requirements: Sit for long periods of time. Handle up to 50 lbs. Work Conditions Environment: Office/Warehouse Travel: What we offerHealth & Welfare Medical, dental, and vision insurance plans for employees and dependents Health care & dependent flexible spending plans Free Life and AD&D coverage with supplemental coverage options Employee assistance programs focused on mental health Financial Wellbeing Competitive compensation Bonus opportunities Generous 401(k) plan Flexibility & Time Off Paid time off, including vacation, bereavement, jury duty, sick leave, disability, holidays. Community & Personal Development Donation matching and time off to volunteer Educational reimbursement About UsGibraltar is a leading manufacturer and supplier of products and services for North American agtech, renewable energy, residential, and infrastructure markets. By building solutions that make life better for people and the planet, Gibraltar advances the art and science of engineering, science and technology to shape the future of comfortable living, sustainable power, and productive growing. Guided by an inclusive, values-driven culture that celebrates and rewards different perspectives, we work together to create lasting positive impact on everyone our business touches. To learn more about what makes us #GibraltarProud, visit our website: www.gibraltar1.com Gibraltar is an Equal Opportunity Employer; and considers applicants for all positions without regard to race, color, religion, creed, gender, gender identity, national origin, age, disability, marital or veteran status, sexual orientation, or any other legally protected status. In addition, Gibraltar will provide reasonable accommodations for qualified individuals with disabilities. #LI-EB1

Who We Are: The Spacecraft Development Department is a group of innovative engineers, program managers, and technicians developing unique spacecraft solutions for challenging space missions. We design and fabricate custom solutions to explore the boundaries of science or solve complex problems not yet delivered by industry using a variety of payloads. Objectives of this Role: Work in multidisciplinary project teams to design, analyze, and build cutting edge spacecraft to enable the next generation of spaceflight exploration.Interface with customers and support design reviews to justify design decisions.Support and lead R&D and promotional efforts to develop and implement new technologies.Provide technical leadership for spacecraft system development across the full program life cycle.Provide innovative technical solutions to design challenges.Daily and Monthly Responsibilities: Support design efforts for spacecraft electrical power subsystems.Test hardware to demonstrate robustness against the environmental conditions of launch and space.Develop technical reports for mission status and materials for internal and external reviews.Propose and perform internal research to improve technology and establish competitive advantage.Requirements: Requires a Bachelors or a Masters degree in Electrical Engineering or related field.0-3 years: Design experience required; focus on electrical power subsystem preferred.Demonstrated technical excellence through a variety of challenging assignments, work under moderate to minimal supervision, and demonstrated ability for having accountability to complete assignments.A valid/clear driver's license is required. Special Requirements: Applicant selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information. Applicant must be a U.S. citizen. Job Locations: San Antonio, Texas For benefits information at our San Antonio location, click here. For benefits information at all other locations, click here. An Equal Employment Opportunity/Affirmative Action Employer Race/Color/Religion/Sex/Sexual Orientation/Gender Identity/National Origin/Disabled/Veteran Committed to Diversity in the Workplace

Who We Are: We develop mechanical solutions for machinery systems in multiple industries. From power utilities to the oil and gas industry, we are proud to improve efficiency and productivity through expertise in engineering dynamics, structures, materials, and fluids systems. Objectives of this Role: Develop fluid or structural solutions for machinery systems using engineering principles, design practices, and engineering software tools.Utilize instrumentation to measure and understand industrial machinery systems, including electronics and data acquisition systems.Interface with customers on projects, including proposals, reports, and meetings.Travel to client sites for field testing.Promote organizational and laboratory capabilities at industry events and conferences.Daily and Monthly Responsibilities: Perform evaluations and analysis of structural and fluid problems of machinery and associated plant systems particularly for the energy industry, measure pulsation and vibration data in an effort to diagnosis machinery performance issues.Perform transient fluid modeling simulations; perform finite element analysis using ANSYS or similar tools; prepare and or run structural and fluid models of fluid handling machinery (compressors, pumps, etc.) and piping systems to identify behaviors, response to inputs.Assist in the development of software and diagnostic tools to enhance data collection and analysis, machinery system modeling, diagnose and solve existing machinery problems and the design of improved fluid handling machinery systems.Conduct laboratory research required by clients and directed at finding solutions and advancements for fluid handling machinery; independently write technical reports, proposals and technical presentations.Oversee and manage project technical activities, cost, and scheduling; deal directly with customers and supervise technical staff; develop and deliver presentations to customers; participate in conferences and other events to actively promote SwRI business.Requirements: Requires a Bachelors degree in Mechanical Engineering or related degree field.1 years: Professional level engineering experience, ideally with machinery related experience preferred; familiar with instrumentation used for laboratory experiments, electronics, and data acquisition systems.0-1 years: Some design experience is preferred.0-1 years: Must have sufficient written and communication skills for the preparation of technical reports, proposals, and presentations. Must be able to work in a team or independently with minimum oversight.0-1 years: Modeling experience with tools such as HYSYS, Synergi Pipeline Simulator (SPS) for fluid modeling or finite element analysis using ANSYS, structural dynamics, AISC structural design, ASME B31.3 piping design, and Caesar II for structural models.A valid/clear driver's license is required. Special Requirements: Must be a U.S. person (i.e., U.S. citizen, non-U.S. citizen national, lawful permanent resident, asylee, or refugee) due to ITAR work in section. Job Locations: San Antonio, Texas For more information about this division, visit the Mechanical Engineering home page. For benefits information at our San Antonio location, click here. For benefits information at all other locations, click here. An Equal Employment Opportunity/Affirmative Action Employer Race/Color/Religion/Sex/Sexual Orientation/Gender Identity/National Origin/Disabled/Veteran Committed to Diversity in the Workplace

Reports to: Construction Technology Manager FLSA Status: Full-Time, Salaried Exempt Normal Working Hours - Office Hours: 8 am to 5 pm, Monday through Friday Position Objective: Responsible for leading the implementation and utilization of VDC/BIM technology and processes on various construction projects. ESSENTIAL DUTIES RESPONSIBILITIES: • Lead the process of MEP coordination on multiple construction projects by working closely with Joeris outsourcing partners • Work with Joeris outsourcing partners to create, develop, manage, and maintain 3D BIM models in Revit • Work with project teams to develop and implement VDC and BIM methodologies • Educate project teams and clients about the benefits of Virtual Design and Construction • Provide advice and direction on projects where technologies can be used. • Help to develop VDC/BIM strategies and its implementation plan for the company • Schedule and conduct kick off meetings and coordination meetings • Provide training to the project teams on using BIM Glue • Work with the preconstruction teams to develop simulations, logistics plans, and constructability reports • Use Virtual Reality with software like Enscape to conduct VR tour/experience for customers • Use Laser Scanning for reality capture of existing conditions on projects as required • Assist estimators with model-based cost estimation using Assemble. Provide training as needed. • Fly drones on the projects as needed • Assist marketing team by providing renderings, animations and videos as requested • Pilot new technologies that improves the VDC/BIM processes and services • Additional duties as required EDUCATION AND/OR EXPERIENCE: • 2+ years of experience in BIM coordination • Bachelor's degree in construction-related field • Course work or experience with BIM emphasis SKILLS • Required proficiency with Revit, Navisworks, and AutoCAD • Experience in project management and team management • Experience with Enscape and Oculus Rift • Complete understanding of BIM coordination process with experience of BIM Glue • Experience with laser scanners and software like Autodesk Recap • FAA certified to fly drones is a plus • Knowledge of Assemble and Sketchup is a plus • Must be able to read drawings, specifications, building codes, and other technical product and material specifications • Must be able to speak, read, and write English PHYSICAL REQUIREMENTS:Must be capable of remaining in a stationary sitting position, occasionally moving about the office; prolonged standing; occasional lifting (overhead, waist level) from floor; bending/reaching; climbing; balancing; bending; stooping; kneeling; crouching; crawling; handling; feeling; talking; hearing; depth perception; visual accommodation; color vision; field of vision; near acuity; far acuity; and strength. Frequent near vision use for reading and computer use. Ability to lift, move and transport items weighing 20 lbs. During workweek, or as needed, regular drives between job sites and for meetings with owners, architects, etc. WORK ENVIRONMENT: Work primarily in a climate-controlled environment with minimal safety/health hazard potential. May be exposed to a variety of extreme conditions at construction jobsites: heat; cold; wet and/or humid; proximity to moving mechanical parts; exposure to electric shock; working in high, exposed places; exposure to toxic/caustic chemicals, noise, dust, dirt, mud, vibration, fumes, airborne particles, etc. EQUAL EMPLOYMENT OPPORTUNITY:The Company is an equal opportunity employer and makes employment decisions on the basis of merit. Company policy prohibits unlawful discrimination based on race, color, creed, gender, religion, marital status, age, sexual orientation, gender identity, national origin, veteran status or physical or mental disability, or any other consideration made unlawful by federal, state, or local laws. This also includes a perception that anyone has any of those characteristics or is associated with a person who has or is perceived as having any of those characteristics. All such discrimination is unlawful. The Company is committed to compliance with all applicable laws providing equal employment opportunities. This commitment applies to all persons involved in the operations of the Company and prohibits unlawful discrimination by any employee of the Company, including Superintendents, Managers, and co-workers. To comply with applicable laws ensuring equal employment opportunities to qualified individuals with a disability, the Company will make reasonable accommodations for the known physical or mental limitations of an otherwise qualified individual with a disability who is an applicant or an employee unless undue hardship would result

Job Title: Cloud Engineer 3 (REMOTE)Location: Richmond, VADuration:12+ MonthsJob Description:The Azure Cloud and DevOps Trainer/Developer/Engineer is a versatile role that combines the responsibilities of developing and delivering Azure cloud migration from on-premises systems to Microsoft Azure cloud and DevOps training programsThe Azure Cloud and DevOps Trainer/Developer/Engineer is a versatile role that combines the responsibilities of developing and delivering Azure cloud migration from on-premises systems to Microsoft Azure cloud with High Available/DR capacity and DevOps training programs with the hands-on work of developing and maintaining Gitlab DevOps tools and pipelines. The ideal candidate will have a deep understanding of Azure cloud services, DevOps principles, and practices, as well as experience developing and delivering training materials and coding skills in multiple computer languages.Essential Duties and Responsibilities:Training:Develop and deliver Gitlab/Agile/Visual Studio Code training programs for internal audiencesCreate and maintain training materials, including presentations, handouts, exercises, and lab guidesStay up-to-date on the latest Azure cloud services, Gitlab DevOps tools, and technologiesDevelopment:Develop, migrate,and maintain Azure cloud infrastructure, including virtual machines, storage,App services, Key Vault, on-prem IIS, Windows Server, Redhat Linux(RHEL), andSQL DatabaseDevelop and maintain Automate Gitlab pipeline processes using scripting languages and automation tools, such as PowerShell, and, shell scriptsDevelop and maintainASP.NET and WebAPI applicationsTroubleshoot and resolve Azure cloud, Gitlab issuesDevelop and maintain Gitlab DevOps tools and pipelines, including continuous integration (CI), and continuous delivery (CD).Stay up-to-date on the latest Azure cloud services, Gitlab DevOps tools, and technologiesContribute to the development of Azure cloud and Gitlab DevOps documentationSkills:SkillRequired / DesiredAmountof ExperienceAzure cloudRequired5YearsGitlabRequired5YearsDevOps and Agile Software Development Life CycleRequired5Years.NET Development including ASP.NET, MVC, .NET CoreRequired7YearsSQL Server and T-SQLRequired3YearsPowershell and Shell scriptingRequired3YearsTrainerRequired3YearsWindows Server and Redhat LinuxRequired3Yearsv

Who We Are: Join the Surface Engineering and Materials Chemistry Section, within the Materials Engineering Department as a Summer Intern! Our group applies coatings or surface treatments to enhance the optical, chemical, electrical, mechanical, or structural properties of components. As a member of the team, you will help develop creative solutions for existing and next-generation technologies for both government and industry clients. You will have the opportunity to work with scientists and engineers who are experts in their fields and gain exposure to a diverse array of projects and technologies. Objectives of this Role: Work alongside engineering staff to perform experiments in material synthesis and characterization, thin film coating fabrication, process optimization and development.Be a solution-oriented problem solver that exercises creativity and independent judgement in determining approaches to solve a wide range of technical problems.Learn new technical skills to complete project work and develop new materials and processes.Get exposed to a variety of projects and real world technical problems.Daily and Monthly Responsibilities: Assist with building components, subunits, models, and adaptations of standard equipment.Performs experiments; documents in lab notebook, interprets data to determine pass/fail criteria for next steps.Hands-on work in laboratory environments. Quickly learn chemical and material synthesis processes.Assemble data and contribute to reports.Requirements: Must be pursuing a Bachelors or a Masters degree in Chemical Engineering.0 years: Strong interest in chemical engineering, technical challenges, and problem solving.Strong Communication Skills.A valid/clear driver's license is required. Special Requirements: Must be a U.S. person (i.e., U.S. citizen, non-U.S. citizen national, lawful permanent resident, asylee, or refugee) due to ITAR work in section. Job Locations: San Antonio, Texas For more information about this division, visit the Mechanical Engineering home page. For benefits information at our San Antonio location, click here. For benefits information at all other locations, click here. An Equal Employment Opportunity/Affirmative Action Employer Race/Color/Religion/Sex/Sexual Orientation/Gender Identity/National Origin/Disabled/Veteran Committed to Diversity in the Workplace

Who We Are: The Materials Science and Failure Analysis Section develops solutions for complex materials problems using experimental and analytical methods. We serve government and commercial sponsors across a variety of technical sectors. Objectives of this Role: Provide laboratory support for research projects involving materials synthesis, optimization, and failure analysis.Use a variety of chemical/physical processes for materials synthesis and bench top characterization techniques to evaluate material systems.Provide data analysis and present results from project tasks in person and in writing to a multidisciplinary project team.Assist in, or lead, the design and assembly of laboratory apparatuses, including electronic, thermal, and mechanical controls.Daily and Monthly Responsibilities: With guidance from senior staff, perform analytical and experimental work in materials science and chemistry laboratory spaces.As necessary, perform troubleshooting on experimental methods and data acquisition instruments.Analyze and summarize collected data utilizing multiple post processing tools and report data to project team.Support or lead the design and assembly of specialized laboratory apparatuses.Coordinate with other operating groups to fulfill project needs.Requirements: Requires a Bachelors degree in Mechanical Engineering, Chemical Engineering, Materials Science & Engineering.0-3 years: Hands-on experience operating laboratory analytical instruments, preferably related to chemistry or materials characterization.0-3 years: Must possess strong interpersonal and problem-solving skills, the ability to work independently and effectively communicate complex information.0-2 years: Hands on experience with LabVIEW or similar control engineering software, programming languages (Fortran, Python, etc.) is desired.0-2 years: Hands on experience in the design and assembly of laboratory apparatuses. Familiarity with CAD software (e.g., Solid Works), processes flow diagraming, electrical and mechanical control systems is desired.A valid/clear driver's license is required. Special Requirements: Applicant selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information. Applicant must be a U.S. citizen. Job Locations: San Antonio, Texas For more information about this division, visit the Mechanical Engineering home page. For benefits information at our San Antonio location, click here. For benefits information at all other locations, click here. An Equal Employment Opportunity/Affirmative Action Employer Race/Color/Religion/Sex/Sexual Orientation/Gender Identity/National Origin/Disabled/Veteran Committed to Diversity in the Workplace

Role: Substation EngineerLocation: San Antonio, TexasVISA: OfferedRelocation: OfferedType: Fully On-SiteWe are currently seeking a Substation Engineer.The ideal candidate will be responsible for executing engineering and design tasks that involve the application of engineering principles and expertise in substation design.Responsibilities:Engage in detailed engineering and design activities for substation projects ranging from 4kV to 345kV, encompassing the entire project lifecycle from conceptualization to construction.Develop and modify design documents and drawings for projects, including but not limited to one-lines, three-lines, control schematics, wiring diagrams, relay panel arrangements, specifications, conduit and cable sizing/routing, and generating bills of material.Facilitate effective communication and coordination of project activities with managers, clients, and relevant stakeholders.Prepare project scopes, schedules, and budgets, ensuring adherence to timelines and financial parameters.Assume the role of project engineer and/or project manager when necessary.Requirements:Bachelor's degree in Electrical EngineeringMinimum of 5 years of experience in substation design.Proficiency in AutoCAD, Microstation, and Microsoft Office Suite.