Data Engineer Salary in San Antonio, TX

Who We Are: The Spacecraft Development Department is a group of innovative engineers, program managers, and technicians developing unique spacecraft solutions for challenging space missions. We design and fabricate custom solutions to explore the boundaries of science or solve complex problems not yet delivered by industry using a variety of payloads. Objectives of this Role: Work in multidisciplinary project teams to design, analyze, and build cutting edge spacecraft to enable the next generation of spaceflight exploration.Provide technical leadership for command and data handling (C&DH) subsystem development across the full program life cycle.Interface with customers and support design reviews to justify design decisions.Support and lead R&D and promotional efforts to develop and implement new technologies.Provide innovative technical solutions to design challenges.Daily and Monthly Responsibilities: Develop electrical power subsystem requirements and verification planning and perform analyses necessary for development of a spacecraft C&DH subsystem.Lead supervision and design efforts for spacecraft C&DH systems as well as fabrication efforts for electrical C&DH subsystem spaceflight hardware.Test hardware to demonstrate robustness against the environmental conditions of launch and space.Develop technical reports for mission status and materials for internal and external reviews; propose and perform internal research to improve technology and establish competitive advantage.Mentor junior engineers and develop best practices to aid the development of spacecraft.Requirements: Requires a Bachelors or a Masters degree in Electrical Engineering or related field.5-10 years: Design experience required with demonstrated experience as a command and data handling subsystems lead.Avionics development and Model Based Systems Engineering (MBSE) experience preferred.Spacecraft or space system development experience for NASA, DoD, or commercial applications preferred.Demonstrated technical excellence through a variety of challenging assignments, work under moderate to minimal supervision, and demonstrated ability for having accountability for completing assignments.A valid/clear driver's license is required. Special Requirements: Applicant selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information. Applicant must be a U.S. citizen. Job Locations: San Antonio, Texas For benefits information at our San Antonio location, click here. For benefits information at all other locations, click here. An Equal Employment Opportunity/Affirmative Action Employer Race/Color/Religion/Sex/Sexual Orientation/Gender Identity/National Origin/Disabled/Veteran Committed to Diversity in the Workplace

Who We Are: The Electromechanical & Optical Systems department of the Applied Physics Division at Southwest Research Institute conceives, develops, designs, test and delivers specialized custom electrical, mechanical, optical and photonic systems solutions to benefit the government, industry, and the public. Objectives of this Role: Contribute to the design and development of innovative mechanical, electromechanical, and optical systems.Apply proficient CAD modeling techniques to create and refine system designs, from conception to final deliverable stage.Produce comprehensive technical drawings and schematics.Work in close collaboration with our technical team.Act as the point of contact for queries, provide advice and direction, engage in brainstorming sessions, guide design processes, liaise with fabricators, and address troubleshooting needs.Assist in generating high-quality, professionally written documentation that clearly communicates engineering concepts, design details, and project outcomes.Participate in the review, testing, and validation of design prototypes.Utilize engineering methodologies and principles to confirm the functionality and performance of developed systems, ensuring they meet the required specifications and standards.Daily and Monthly Responsibilities: Provide engineering support to assigned projects - working independently and in team environments.Brainstorm, troubleshoot, and provide technical support to colleagues and clients as needed.Attend team meetings to discuss project updates, progress, and risks.Typical duties will involve the formulation and implementation of approaches to solving a wide array of problems - focused on the design and development of mechanical and electrical systems for data collection.Review approaches and designs with other team members or staff.Review and prioritize projects, ensuring timely progress and adherence to deadlines.Develop and update technical designs, drawings, and schematics using CAD software.Communicate and collaborate with design teams to address requirements, offer guidance, and align project goalsRoutinely consult with Program/Project Leads regarding the status of work assignments.Direct and supervise the work of technicians as may be required. Provide comprehensive written updates for monthly progress reports, final reports, and proposals.Give input on cost estimates.Prepare and present work to clients.Conduct experiments methodically, analyze data and interpret results.Test and evaluate designs.Identify, formulate and produce effective solutions to emerging problems.Evaluate final product's overall performance and reliability.Requirements: Requires a Bachelors degree in Mechanical Engineering, Mechatronics Engineering, Industrial Engineering or related engineering degree.0-5 years: Mechanical Design, Electro-Mechanical Design.0-5 years: Experimental testing setup.0-2 years: SolidWorks and design experience.0-5 years: Strong communication skills.A valid/clear driver's license is required. Special Requirements: Applicant selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information. Applicant must be a U.S. citizen. Job Locations: San Antonio, Texas For more information about this division, visit the Applied Physics home page. For benefits information at our San Antonio location, click here. For benefits information at all other locations, click here. An Equal Employment Opportunity/Affirmative Action Employer Race/Color/Religion/Sex/Sexual Orientation/Gender Identity/National Origin/Disabled/Veteran Committed to Diversity in the Workplace

Enterprise Products Partners L.P. is one of the largest publicly traded partnerships and a leading North American provider of midstream energy services to producers and consumers of natural gas, NGLs, crude oil, refined products and petrochemicals. Our services include: natural gas gathering, treating, processing, transportation and storage; NGL transportation, fractionation, storage and import and export terminals; crude oil gathering, transportation, storage and terminals; petrochemical and refined products transportation, storage and terminals; and a marine transportation business that operates primarily on the United States inland and Intracoastal Waterway systems. The partnership's assets include approximately 50,000 miles of pipelines; 260 million barrels of storage capacity for NGLs, crude oil, refined products and petrochemicals; and 14 billion cubic feet of natural gas storage capacity. The Staff Reliability Engineer will be responsible for continuously improving our reliability program for the assigned assets that consists of preventive and predictive programs for each of the regional operating areas assigned (Central Texas and Permian Basin). Other responsibilities include, but are not limited to: Review equipment repair scopes, document down time, lost production, mean time between repairs and develop root cause failure analysis in order to review and revamp existing preventive and predictive programs. Automate / develop reliability reports to benchmark existing equipment performance. Monitor and calculate gas engine/turbine and compressor efficiencies. Implement case studies as needed to improve performance on gas engines/turbines, compressors and pumps. Aids to Identify and assist area operations that occur during production applications and systems related directly to machinery performance. Monitor condition of key pumps, compressors, gas engines/turbines, and motors in order to develop and maintain major overhaul plans for operating regions. Troubleshoot equipment issues using SKF vibration data analytics, Seeq, OSI PI, combustion gas analysis. Witness critical equipment performance tests at OEM facilities. Support field and capital engineering groups in reviewing equipment specifications and equipment selection, monitoring installation and successful start-up. Build trust and confidence with other Company support services and area Operations management team. The successful candidate will meet the following qualifications: B.S. in Mechanical Engineering is required. A minimum of 10 to 15 years' mechanical/process engineering experience in gas and liquid pipeline, gas cryogenic plant, petrochemical or refinery is required. Must have a broad understanding of rotating equipment as it relates to a plant and gas pipeline environment. Specific experience in pumps, gear boxes, centrifugal and reciprocating engines and compressors, gas engines/turbines, compressor surge controls, PLC programs, gas turbines controls, vibration protection, emissions monitoring for reciprocating engines and gas turbines, etc. Experience in process machinery equipment vibration analysis is required. Basic understanding of preventive and predictive maintenance concepts as it applies to reciprocating engines and compressors, gas turbines and other plant equipment. Proficient on personal computers, in particular, word processing and spreadsheets, database programs, data acquisition systems, OSI PI/SEEQ, PLC programs, understand gas engine/turbine controls, centrifugal compressor surge controls. Strong hands-on knowledge in performance monitoring, troubleshooting and repair of reciprocating engines and compressors. Must be self-motivated and work as team member; and mentor and share working knowledge with others. Lead reliability meetings for assigned locations and provide oversight and direction of reliability initiatives. Strong interpersonal and communication skills. Good technical writing ability and able to adapt and learn new methods in performing the job function. Ability and willingness to travel daily with some overnight/weekend stays is required.

Who We Are: We develop mechanical solutions for machinery systems in multiple industries. From power utilities to the oil and gas industry, we are proud to improve efficiency and productivity through expertise in engineering dynamics, structures, materials, and fluids systems. Objectives of this Role: Develop fluid or structural solutions for machinery systems using engineering principles, design practices, and engineering software tools.Utilize instrumentation to measure and understand industrial machinery systems, including electronics and data acquisition systems.Interface with customers on projects, including proposals, reports, and meetings.Travel to client sites for field testing.Promote organizational and laboratory capabilities at industry events and conferences.Daily and Monthly Responsibilities: Perform evaluations and analysis of structural and fluid problems of machinery and associated plant systems particularly for the energy industry, measure pulsation and vibration data in an effort to diagnosis machinery performance issues.Perform transient fluid modeling simulations; perform finite element analysis using ANSYS or similar tools; prepare and or run structural and fluid models of fluid handling machinery (compressors, pumps, etc.) and piping systems to identify behaviors, response to inputs.Assist in the development of software and diagnostic tools to enhance data collection and analysis, machinery system modeling, diagnose and solve existing machinery problems and the design of improved fluid handling machinery systems.Conduct laboratory research required by clients and directed at finding solutions and advancements for fluid handling machinery; independently write technical reports, proposals and technical presentations.Oversee and manage project technical activities, cost, and scheduling; deal directly with customers and supervise technical staff; develop and deliver presentations to customers; participate in conferences and other events to actively promote SwRI business.Requirements: Requires a Bachelors degree in Mechanical Engineering or related degree field.1 years: Professional level engineering experience, ideally with machinery related experience preferred; familiar with instrumentation used for laboratory experiments, electronics, and data acquisition systems.0-1 years: Some design experience is preferred.0-1 years: Must have sufficient written and communication skills for the preparation of technical reports, proposals, and presentations. Must be able to work in a team or independently with minimum oversight.0-1 years: Modeling experience with tools such as HYSYS, Synergi Pipeline Simulator (SPS) for fluid modeling or finite element analysis using ANSYS, structural dynamics, AISC structural design, ASME B31.3 piping design, and Caesar II for structural models.A valid/clear driver's license is required. Special Requirements: Must be a U.S. person (i.e., U.S. citizen, non-U.S. citizen national, lawful permanent resident, asylee, or refugee) due to ITAR work in section. Job Locations: San Antonio, Texas For more information about this division, visit the Mechanical Engineering home page. For benefits information at our San Antonio location, click here. For benefits information at all other locations, click here. An Equal Employment Opportunity/Affirmative Action Employer Race/Color/Religion/Sex/Sexual Orientation/Gender Identity/National Origin/Disabled/Veteran Committed to Diversity in the Workplace

100% Remote Contract 1099 or C2C 6 -9 month plusMUST be USCThe primary role of the Data Architect is to support and expand the Data & Analytics platforms that process, store, organize the data critical for the data and analytics team. This role will have expertise in data movement and database technologies support data analytics and Machine Learning (ML) / Artificial Intelligence (AI) capabilities in the cloud. This person is able to identify performance bottle necks in complex enterprise applications and identify tuning opportunitiesRequirementsResponsibilitiesPossess deep functional and technical understanding of the Machine Learning technologies (Google's Cloud Platform) and leverage it across Client's large, complex and diverse landscape.Analyze performance and scalability characteristics to identify bottlenecks in large-scale distributed systemsPerform root cause analysis of performance issues identified by internal testing and from customers and suggest corrective actionsBusiness acumen (strong understanding of how business operates, and how to harness data and analytics to meet business needs)expert at designing as well as developing all layers of an application and platformLeads the development of technology transitions or architecture evolutions by creating foundational examples of working solutions and coaches' teams on how to build on those examplesEngage early in project efforts to analyze current solutions, provide solution options and recommendations, understand business process impact, provide accurate estimates.Design and Architect applications across multiple domains including Data Engineering, Data Science, Data Viz and App development.Demonstrates deep understanding of business processes and technology building blocksLead collaboration with project teams, application, data, integration, infrastructure, and security enterprise architects to develop and deploy comprehensive solution architecturesEnsure projects are delivered in-line with design, roadmap and to the defined standards and best practices.Is skilled as a Data Architect who can design end-to-end data driven solutionsInfluences adoption working IT, Business and Architecture groupsCreates design considering data sources & dependencies, development landscape, deployment landscape.Generate ideas and suggestions for process and technical improvements for platforms and processes supported by the teamArchitect the GCP data platform to meet the non-functional requirements of the consumptions layer and solutions built on top of the data platform.Identify potential performance and availability challenges proactively, implement recommendations, and ensure that the systems' capacity and availability exceed requirements while ensuring the platform achieves business results.Partner with solution architects, data engineers, platform engineers and other team roles to assess the platform's needs, help design new capabilities, establish architectural roadmaps, design and run tests/proof-of-concepts, help troubleshoot problems, identify risks, and make recommendations.Comfortable with communication across all levels of department and create artifacts to clearly deliver the message.

Who We Are: The Materials Science and Failure Analysis Section develops solutions for complex materials problems using experimental and analytical methods. We serve government and commercial sponsors across a variety of technical sectors. Objectives of this Role: Provide laboratory support for research projects involving materials synthesis, optimization, and failure analysis.Use a variety of chemical/physical processes for materials synthesis and bench top characterization techniques to evaluate material systems.Provide data analysis and present results from project tasks in person and in writing to a multidisciplinary project team.Assist in, or lead, the design and assembly of laboratory apparatuses, including electronic, thermal, and mechanical controls.Daily and Monthly Responsibilities: With guidance from senior staff, perform analytical and experimental work in materials science and chemistry laboratory spaces.As necessary, perform troubleshooting on experimental methods and data acquisition instruments.Analyze and summarize collected data utilizing multiple post processing tools and report data to project team.Support or lead the design and assembly of specialized laboratory apparatuses.Coordinate with other operating groups to fulfill project needs.Requirements: Requires a Bachelors degree in Mechanical Engineering, Chemical Engineering, Materials Science & Engineering.0-3 years: Hands-on experience operating laboratory analytical instruments, preferably related to chemistry or materials characterization.0-3 years: Must possess strong interpersonal and problem-solving skills, the ability to work independently and effectively communicate complex information.0-2 years: Hands on experience with LabVIEW or similar control engineering software, programming languages (Fortran, Python, etc.) is desired.0-2 years: Hands on experience in the design and assembly of laboratory apparatuses. Familiarity with CAD software (e.g., Solid Works), processes flow diagraming, electrical and mechanical control systems is desired.A valid/clear driver's license is required. Special Requirements: Applicant selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information. Applicant must be a U.S. citizen. Job Locations: San Antonio, Texas For more information about this division, visit the Mechanical Engineering home page. For benefits information at our San Antonio location, click here. For benefits information at all other locations, click here. An Equal Employment Opportunity/Affirmative Action Employer Race/Color/Religion/Sex/Sexual Orientation/Gender Identity/National Origin/Disabled/Veteran Committed to Diversity in the Workplace

Who We Are: The Control Systems Department supports a wide variety of Sustainable Energy, Mobility, Powertrain, Aerospace and Defense projects across SwRI. We develop practical solutions by combining off-the-shelf and custom electronics, embedded systems and algorithms. System-level thinking is essential to support design and troubleshooting. Ideal candidates are insatiably curious to understand how things work, and how we can manipulate them. They are exceptionally high aptitude individuals who collaborate well with others. Objectives of this Role: Develop, implement and refine embedded control solutions across a variety of sustainable energy and mobility technologies.Systems may include control, data acquisition, and digital communications utilizing embedded systems (microcontrollers/FPGAs/CPLDs) and desktop applications (Windows/Linux) across various industries including vehicle powertrains and space flight systems.Apply principles and techniques of computer science, engineering, and mathematical analysis to meet project requirements.Lead the full lifecycle design for control and data acquisition systems for multiple applications; define requirements, write specifications, perform analysis, and implement designs from concept to final application; lead and work with team a of engineers.Collaborate with fellow staff, management, and clients to solve complex multidisciplinary engineering problems.Daily and Monthly Responsibilities: Collaborate with staff and clients to understand needs and imagine appropriate embedded system solutions.Leverage your embedded system technical experience to help develop novel solutions that are not commercially available based on microcontroller, DSP, FPGA, instrumentation and electronics.Develop, document, and execute test routines and procedures to validate and verify proper system operation.Troubleshoot new and existing embedded systems and the associated electromechanical systems.Apply principles and techniques of computer science, electrical and computer engineering, and mathematics to meet project requirements.Requirements: Requires a Bachelors, Masters or a PhD in Electrical Engineering or Computer Engineering0 years: Embedded software development (C/C++/Verilog).0 years: Circuit analysis, troubleshooting and design for embedded systems.0 years: Must have strong fundamental and experience-based understanding of electronics, circuits, register-level configuration of microcontrollers/DSPs and of HDL for FPGAs.A valid/clear driver's license is required. Special Requirements: Work assignment is in Ann Arbor, Michigan. Must be a U.S. person (i.e., U.S. citizen, non-U.S. citizen national, lawful permanent resident, asylee, or refugee) due to ITAR work in section. Job Locations: Ann Arbor, Michigan Or San Antonio, Texas For more information about this division, visit the Powertrain Engineering home page. For benefits information at our San Antonio location, click here. For benefits information at all other locations, click here. An Equal Employment Opportunity/Affirmative Action Employer Race/Color/Religion/Sex/Sexual Orientation/Gender Identity/National Origin/Disabled/Veteran Committed to Diversity in the Workplace

Who We Are: Carbon Capture and Utilization Process Development Section works to support first of its kind carbon capture and carbon utilization processes. Lab to pilot plant process development services are performed to take new and novel technologies to commercialization. Objectives of this Role: This position will fill a role in supporting operations for pilot plants for process development by expanding our technical portfolio of offerings to our clients.Ability to be hands on and fill operating and mechanical roles is critical to the success of our programs.Increased utilization by supporting existing large projects and conducting business development for existing and new areas.Oversee and conduct pilot plant buildup work for new and existing pilot plants.Be leader in operations training, procurement, and inventory control for process development and pilot plants, with expertise in technical areas of the research.Train operators and engineers to maintain pilot plant area and operations with a high degree of "technical" success. Emphasis on department safety culture, waste disposal, procedures, ISO.Daily and Monthly Responsibilities: Design processes or unit operations for chemical or refinery systems.Plan and conduct research and process development work in carbon capture and utilization areas.Expand particular area of expertise (ideally decarbonization, batch/CSTR kinetics, absorption/desorption).Support ongoing projects through pilot plant operations (Shift work may be required), data compilation, mass and energy balances, operator training, procedure development, laboratory upkeep, maintenance, and safety review/document preparation. Department safety emphasis.Opportunity to operate pilot plants as a lead operator during processing campaigns (requiring shift work and/or weekends).Create process simulations using commercial software in addition to input/output, process flow and process instrumentation diagrams.Conduct strategic business development activities.Provide technical supervision to other engineers, technicians, analyst, and pilot plant operators. Emphasis on proposal writing and publications.Communicate with vendors, clients, and operators to set up equipment and construct systems for new processes.Promote and secure new work as trained through mentorship and internal business development training.Requirements: Requires a Bachelors degree in Chemical Engineering.Shift work required.1-3 years: Direct experience with chemical engineering process development work (developing Excel spreadsheets for chemical engineering calculations and data compilation) to include designing and conducting lab scale to pilot scale experiments.1-3 years: High attention to detail in calculations, design, and operations. Must be able to develop process flow diagrams, process and instrumentation diagrams, I/O diagrams, and process control strategies.1-3 years: Must be able to communicate clearly and interface with clients or potential clients as needed in the course of the project or proposal process. Must be able to conduct tasks in parallel. Experience with actual hands-on buildup of processes and test systems is preferred.1-3 years: Experience in any of the following areas: biofuels, hydrotreating, carbon capture, carbon utilization, plastics recycling, pyrolysis, delayed coking, distillation, electrolysis, clean hydrogen, biomass conversion.A valid/clear driver's license is required. Special Requirements: Must be a U.S. person (i.e., U.S. citizen, non-U.S. citizen national, lawful permanent resident, asylee, or refugee) due to ITAR work in section. Job Locations: San Antonio, Texas For more information about this division, visit the Chemistry & Chemical Engineering home page. For benefits information at our San Antonio location, click here. For benefits information at all other locations, click here. An Equal Employment Opportunity/Affirmative Action Employer Race/Color/Religion/Sex/Sexual Orientation/Gender Identity/National Origin/Disabled/Veteran Committed to Diversity in the Workplace

DescriptionSummary:The Information Technology Engineer II (Enterprise Storage Engineer II) is a strategic position providing the highest level of technical skill and expertise in Storage Engineering as well as a tactical position involved with the execution of Storage Networking operations. The Information Technology Engineer II is responsible for full life cycle management of the storage environment including requirements gathering, design, implementation and support. This position has extensive technical knowledge and experience in operational maintenance, availability, capacity planning, and monitoring of critical Storage Area Networking (SAN), Network Attached Storage (NAS) and other storage related environments.The Information Technology Engineer II will design and build solutions based on business requirements, enterprise architecture, and knowledge of appropriate systems and system software. Provide knowledge and leadership in emerging storage technologies such as IT business continuity, replication, encryption, de-duplication, storage virtualization, thin provisioning, virtual tape, storage resource management (SRM), and database cloning.Day to day activities include storage provisioning, performance tuning, problem solving, capacity planning, adding volumes, scripting for automating of tasks, assigning ports, error tracking, data movement, software configurations, product evaluation, and addressing compatibility issues. The position also works as part of a cross-functional team that deals with the full spectrum of technology and will fulfill the role of third level support for storage technologies, providing training and direction to other technical staff that perform the bulk of the first and second level support tasks. Requirements:Bachelor’s degree in Computer Science, Engineering, Math or related field or equivalent experience (5 years) required. Extensive technical knowledge of Storage Area Networks and Storage Engineering to include: Interoperability, fiber infrastructure, replication, operational recoverability, storage masking, fiber channel transitions, fabric switches and remote sources. Extensive technical knowledge of File, Block and Object based storage systems.Knowledgeable in HA and BCP concepts (RAID, SPOFs, etc). Experience with VMware virtualization technologies. Experience with EMC Replication Manager or HP Continuous Access is required.In depth knowledge of electronic hardware to the component level as it relates to Data Center operations in general and Fiber Channel specifically.In depth knowledge of Network-attached Storage platforms.In depth knowledge of Storage Area Network from specific detail about components and software to then extend and include an overall view the requirements for storage across the corporate enterprise.Hardware/Software experience with one or more of the following models is required:EMC Time Finder, SRDF or equivalent software.Must have worked with Storage Administrator software and have administered a SAN and be able to tune and configure SAN storage systems as required to meet the demands of dynamically changing database and site storage requirements. Working knowledge of EMC Symmetric product lines such as PowerMax.Brocade, CISCO, Aruba director level fabric switches In-depth knowledge of EMC, HP or Pure storage product lines. Knowledge of local and wide area networking on multiple platforms: Windows, Unix, Linux and VMware; network protocols and routing; network, server, and host operating systems; IP networking, Active Director/LDAP, Provisioning windows Share and NTFS permissions, Linux/Unix file permissions, internet and intranet technologies; email, office automation and collaboration technologies; voice and/or data communications; voice and/or data networking; Windows desktop OS; server hardware, software, and administration.Basic Understanding of Cloud Compute TechnologiesA total of five (5) years of experience in large corporate systems environment with a wide variety of Information Management systems, networks and technologies required.Minimum of five (5) years of experience engineering solutions and instrumentation for EMC and/or HP Storage Area Networks (SAN) for mission critical, enterprise applications and databases.Minimum of three (3) years of experience in data lifecycle management systems (Storage Essentials, or comparable) in enterprise scale environment with multiple storage tier levels.Minimum of three (3) years of experience engineering solutions related to storage operational and disaster recovery data replication and/or storage virtualization technologies.Prior experience in a health care systems environment is a plus.One or more of the following storage networking certifications required:EMC Certified Professional/Engineer HP Certified SAN Engineer/ArchitectSNIA Storage Networking Certification as an SCP, SCSE, SCA, or SCSN-E At least one of the following certifications recommended:OS Engineer (Microsoft, UNIX or Linux)Work Type: Full TimeEEO is the law - click below for more information: https://www.eeoc.gov/sites/default/files/2023-06/22-088_EEOC_KnowYourRights6.12ScreenRdr.pdfWe endeavor to make this site accessible to any and all users. If you would like to contact us regarding the accessibility of our website or need assistance completing the application process, please contact us at (844) 257-6925.

Who We Are: The Rotating Machinery Dynamics Section at Southwest Research Institute is responsible for transitioning ideas and concepts for improving machinery, machinery based power systems, and renewable energy systems into tangible systems that we design, build, and test. Objectives of this Role: Designing, fabrication, assembly, and testing of custom compressors, pumps, and turbines for advanced power cycles that meet a complex set of requirements.Ensure that machinery casings and pressure containment are safe and meet applicable ASME boiler and pressure vessel codes.Design reliable shafting and rotating components that meet required rotordynamic, stress, and thermal design constraints.Design high temperature components with advanced cooling, thermal barrier systems, and creep life to survive design life requirements.Write reports and present technical data to clients and industry peers.Daily and Monthly Responsibilities: Model machine designs in SolidWorks and developing detailed manufacturing drawings for fabrication and assembly.Analyze the mechanical performance of a machine design using applicable engineering principles and advanced analysis software such as ANSYS.Work with a team of engineers with a specialty in controls, thermal management, thermodynamics, and aerodynamics to ensure that the design meets is intended target.Present updates to clients on the status of the design to collaborate and determine whether there is a need to alter design requirements.Present papers at applicable conferences to disseminate knowledge to the public.Requirements: Requires a Bachelors, Masters or a PhD in Mechanical Engineering0-5 years: Experience in machine design and analysis, must have an interest or academic experience in design and development of radial and axial turbomachineryPh.D with graduate experience in machinery design and analysis is highly desired.Strong Communication skills, successfully in a team setting and ability to creatively solve problems as a team.Will need to operate tests outdoors, indoors, and in extreme environments at field sites.A valid/clear driver's license is required Special Requirements: Must be a U.S. person (i.e., U.S. citizen, non-U.S. citizen national, lawful permanent resident, asylee, or refugee) due to ITAR work in section. Job Locations: San Antonio, Texas For more information about this division, visit the Mechanical Engineering home page. For benefits information at our San Antonio location, click here. For benefits information at all other locations, click here. An Equal Employment Opportunity/Affirmative Action Employer Race/Color/Religion/Sex/Sexual Orientation/Gender Identity/National Origin/Disabled/Veteran Committed to Diversity in the Workplace