Office Engineer Salary in Olathe, KS

OverviewWe are seeking a full-time Aviation Software & Systems Engineer for our aviation product development team located in our Olathe, KS office. In this role, you will support the successful development, and verification of sophisticated avionics systems by creating and testing embedded and PC software; evaluating relevant sensor and component technology; devising and analyzing algorithmic concepts; and implementing system-level simulations and tests.Essential Functions:Develop and maintain algorithms and software for sensor-system intensive FAA-certified avionics, including attitude heading reference systems (AHRS), strap-down magnetometers, and inertial productsAssist in software verification activities to support FAA certificationEvaluate viability of existing and emerging sensor technologies for advanced state-of-the-art avionics productsDesign and implement simulations of complex avionics systemsParticipate in testing of avionics systems in laboratory and flight environmentsParticipate in product design activities including electrical, software, or mechanical developmentBasic Qualifications:Qualified candidates will possess a Masters Degree or PhD in Electrical, Aerospace, Software or Mechanical Engineering from an accredited college or university with a cumulative minimum 3.5 GPA or a field relevant to Garmin's business needs for this role, OR 4 years work experience performing a role substantially similar to the essential functions of this job description AND demonstrated training and knowledge in dynamics, Kalman Filtering, estimation, and/or control theory relevant to Garmin's business needs for this role A minimum of 2 years experience performing a role that involves structured software programming, preferably C or C++ and active use of system design and analysis tools, preferably Matlab and/or Simulink Demonstrated strong and effective verbal, written, and interpersonal communication skills and superior analytical skills with keen attention to detail and quality are also a mustDesired Qualifications:Demonstrated knowledge of inertial sensors and navigation relevant to Garmin's business needsExperience with RTCA DO-178B software development and certification testing proceduresPrivate pilot's licenseGarmin International is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, veteran's status, age or disability.This position is eligible for Garmin's benefit program. Details can be found here: Garmin Benefits.

OverviewWe are seeking a full-time Aviation Systems Integration & Test Engineer at our office in Olathe, Kansas to plan and execute hands-on testing of new avionics solutions that delight our customers across aviation market segments. Working in close collaboration with various engineering teams, you will apply your systems integration and test skills to deliver superior systems, products, and services. Check out these behind the scenes videos: Part 1 & Part 2 Essential FunctionsPerform hands-on system testing of new systems, products, and servicesUnderstand and communicate customer expectations across aviation marketsCreate system test plans in coordination with development schedulesDevelop system test procedures to validate user experience and verify system requirementsTroubleshoot integration bench setup issues and investigate problems reported by customersClearly communicate issues observed during testing and recommend solutions to engineering teamsDefine and maintain system architectures and requirementsProactively improve processes, tools, and proceduresExemplify Garmin's Mission, Vision, Values, and Quality Policy and proactively work to improve Garmin's image and cultureBasic QualificationsBachelor's Degree in Computer Science, Electrical Engineering, Computer Engineering, Mechanical Engineering, Aerospace Engineering, or another relevant technical field AND a minimum of 1 year relevant experience OR an equivalent combination of education and experienceExcellent academics (cumulative GPA greater than or equal to 3.0 as a general rule)Demonstrated advanced knowledge in one or more of the following technical areas: Systems Integration, System Safety, System RequirementsDemonstrated problem solving abilityDesired QualificationsMaster's Degree in an Engineering fieldOutstanding academics (cumulative GPA greater than or equal to 3.5)Demonstrated passion for and involvement in the aviation communityOperational knowledge of Garmin or competitive avionicsPrevious work experience with consumer or aviation productsGarmin International is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, veteran's status, age or disability.This position is eligible for Garmin's benefit program. Details can be found here: Garmin Benefits

OverviewWe are seeking a full-time Senior Aviation Systems Security Engineer at our office in Olathe, Kansas, to design and evaluate security architectures for our avionics systems, products, and services. Working in close collaboration with various engineering teams, you will apply your systems engineering skills and cybersecurity expertise to ensure certification and business requirements are met and Garmin's high security posture is maintained. Check out these behind the scenes videos: Part 1 & Part 2 Essential Functions Plan, design, and analyze security architectures to meet certification and business requirements Perform security assessments using applicable industry standards, guidance, and methods Generate and maintain security standards, processes, and requirements Develop threat models to identify threat scenarios and determine risk acceptability Plan and execute security testing to ensure robustness of implemented security measures Actively monitor and evaluate the global cybersecurity landscape Perform technical market research on emerging technologies Support incident response efforts including investigation, remediation, and communication Coordinate security initiatives internally to establish a robust security posture Understand and communicate customer expectations across aviation markets Proactively improve processes, tools, and procedures Exemplify Garmin's Mission, Vision, Values, and Quality Policy and proactively work to improve Garmin's image and culture Basic qualificationsBachelor's Degree in Computer Science, Electrical Engineering, Computer Engineering, Mechanical Engineering, Aerospace Engineering, or another relevant technical field AND a minimum of 5 years relevant experience OR an equivalent combination of education and experienceExcellent academics (cumulative GPA greater than or equal to 3.0 as a general rule) Demonstrated expert knowledge in one or more of the following technical areas: Systems Integration, System Safety, System Requirements, System Security Demonstrated problem solving ability Desired qualificationsMaster's Degree in an Engineering field Outstanding academics (cumulative GPA greater than or equal to 3.5) Demonstrated ability to develop software, perform security testing, or conduct security risk assessments in accordance with RTCA DO-326A, EUROCAE ED-202A, or ASTM F3532 Experience with avionics certification standards and guidance such as ARP 4754(A) or ARP 4761 Demonstrated passion for and involvement in the aviation community Operational knowledge of Garmin or competitive avionics Garmin International is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, veteran's status, age or disability.This position is eligible for Garmin's benefit program. Details can be found here: Garmin Benefits

OverviewWe are seeking a full-time Aviation Systems Security Engineer at our office in Olathe, Kansas, to design and evaluate security architectures for our avionics systems, products, and services. Working in close collaboration with various engineering teams, you will apply your systems engineering skills and cybersecurity expertise to ensure certification and business requirements are met and Garmin's high security posture is maintained. Check out these behind the scenes videos: Part 1 & Part 2 Essential functionsPlan, design, and analyze security architectures to meet certification and business requirements Perform security assessments using applicable industry standards, guidance, and methods Generate and maintain security standards, processes, and requirements Develop threat models to identify threat scenarios and determine risk acceptability Plan and execute security testing to ensure robustness of implemented security measures Actively monitor and evaluate the global cybersecurity landscape Perform technical market research on emerging technologies Support incident response efforts including investigation, remediation, and communication Coordinate security initiatives internally to establish a robust security posture Understand and communicate customer expectations across aviation markets Proactively improve processes, tools, and procedures Exemplify Garmin's Mission, Vision, Values, and Quality Policy and proactively work to improve Garmin's image and culture Basic qualificationsBachelor's Degree in Computer Science, Electrical Engineering, Computer Engineering, Mechanical Engineering, Aerospace Engineering, or another relevant technical field AND a minimum of 1 year relevant experience OR an equivalent combination of education and experienceExcellent academics (cumulative GPA greater than or equal to 3.0 as a general rule) Demonstrated advanced knowledge in one or more of the following technical areas: Systems Integration, System Safety, System Requirements, System Security Demonstrated problem solving ability Desired qualificationsMaster's Degree in an Engineering field Outstanding academics (cumulative GPA greater than or equal to 3.5) Demonstrated ability to develop software, perform security testing, or conduct security risk assessments in accordance with RTCA DO-326A, EUROCAE ED-202A, or ASTM F3532 Experience with avionics certification standards and guidance such as ARP 4754(A) or ARP 4761 Demonstrated passion for and involvement in the aviation community Operational knowledge of Garmin or competitive avionics Garmin International is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, veteran's status, age or disability.This position is eligible for Garmin's benefit program. Details can be found here: Garmin Benefits

OverviewWe are seeking a full-time Technical Lead Aviation Systems Engineer in our office in Olathe, KS to develop innovative solutions that delight our customers across aviation market segments. Working in close collaboration with Garmin Aviation leadership, you will apply your business and technical skills to create superior systems, products, and lead cross-functional teams to bring these to market. Check out these behind the scenes videos: Part 1 & Part 2 Essential FunctionsLead development of complex systems, products, and services Perform technical market research on emerging technologies and competitive avionics solutionsDefine and maintain system architectures and requirements Understand and communicate customer expectations across aviation markets Mature product/feature concepts and manage roadmaps through periodic reviews with leadership Plan and execute integration testing to validate user experience and verify system requirements Proactively improve processes, tools, and procedures Exemplify Garmin's Mission, Vision, Values, and Quality Policy and proactivley work to improve Garmin's image and cultureBasic QualificationsBachelor's Degree in Computer Science, Electrical Engineering, Computer Engineering, Mechanical Engineering, Aerospace Engineering, or another relevant technical field AND a minimum of 9 years relevant experience OR an equivalent combination of education and experienceExcellent academics (cumulative GPA greater than or equal to 3.0 as a general rule)Demonstrated expert knowledge in one or more of the following technical areas: Systems Integration, System Safety, System Requirements, System Security Demonstrated problem solving abilityDesired QualificationsMaster's Degree in an Engineering fieldOutstanding academics (cumulative GPA greater than or equal to 3.5)Demonstrated passion for and involvement in the aviation communityOperational knowledge of Garmin or competitive avionicsGarmin International is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, veteran's status, age or disability.This position is eligible for Garmin's benefit program. Details can be found here: Garmin Benefits

OverviewWe are seeking a full-time Senior Antenna Engineer in our Olathe, KS location. In this role, you will be responsible for providing technical solutions, project planning, and design execution/testing for complex Aviation antennas for Garmin. Essential FunctionsResponsible for hands on antenna design/development efforts for externally mounted aviation antennasResponsible for hands on antenna design/development efforts for product integrated antennas in Garmin AvionicsCapable of designing naturally resonant (or with matching network) multiband antennasAnalyzes test data and reports to determine if the proposed antenna design meets functional and performance specificationsPartners with Mechanical Engineers to provide feedback of antenna design needs in mechanical assemblyCollaborates with other engineers to realize complete antenna design that may include active transmitters and/or receiversCollaborates and adds value through participation in design reviews, providing comments on antenna design aspects and other engineering areasEvaluates new antenna manufacturing technologies as they apply to existing designs and potential new designsParticipates in project leadership and/or program planning including providing technical input to product development plans and concept documentsMakes substantial contributions toward determination of project goal/objective feasibilityMentors and provides guidance to less experienced Antenna EngineersContributes to advanced technical research on new antenna ideas and enhance Garmin's Intellectual PropertyDirects/coordinates manufacture of prototypes and participates in recruiting activities as assignedBasic QualificationsBachelor's Degree in Electrical Engineering AND a minimum of 5 years of industry experience in RF/antenna design OR Master's Degree in Electrical Engineering with focus on RF/antennas and electromagnetics AND a minimum of 3 years of industry experience in RF/antenna design OR Doctoral Degree in Electrical Engineering with focus on RF/antennas and electromagnetics AND 1 year of industry experience OR an equivalent combination of education and relevant experienceExcellent academics (cumulative GPA greater than or equal to 3.0 as a general rule)Demonstrated strong and effective verbal, written and interpersonal communication skillsDemonstrated ability with application of design standards and procedures to develop moderately complex antenna designs including simulations, prototyping and evaluationDesired QualificationsOutstanding academics (cumulative GPA greater than or equal to 3.5)Extensive circuit design experience with complex commercial or aviation productsExperience with HFSS and simulation driven design workflowsRF design experience such as Filters, LNAs, Receivers, etc.Experience with Keysight Pathwave (ADS) or AWR Microwave OfficePrevious design experience with patch antennas, quad-helix antennas, and other large form factor antennasGarmin International is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, veteran's status, age or disability.This position is eligible for Garmin's benefit program. Details can be found here: Garmin Benefits

OverviewWe are seeking a full-time RF Design Engineer located in our Olathe, KS office. In this role, you will be responsible for designing and developing electronic circuits, equipment and systems for Garmin's Aviation products. Essential FunctionsAbility to use advanced RF Simulation tools, design and build RF designs, and iterate RF simulation and physical design to achieve performance agreement.Demonstrated understanding and ability to implement basic RF design elements: Filters (distributed and lumped), transmission lines, Matching Structures, Small Signal Gain elements, Large Signal Design.Demonstrated understanding and ability to use RF design concepts: Smith Chart, S-parameters, VSWR, Quality Factor "Q", Linearity (P1dB, IP3), Cumulative Noise Figure, Techniques for accounting for RF parasitics.Understand signal processing concepts: Transfer Functions, RF Design for Sampled Systems, Modulation Types, Correlation Implementations (GPS, RADAR, etc...). Prepare or direct preparation of product layouts, detailed drawings and schematics.Direct and coordinate manufacture of prototypes.Plan and develop experimental test programs to verify compliance to all applicable regulations and quality guidelines.Analyze test data and reports to determine if the proposed design meets functional and performance specifications.Support production facilities in the manufacture of products.Interface with the Test Engineers and factory personnel on the testing and production of the products.Perform cost/performance tradeoff analysis of different circuit options.Complete documentation of the design in the required formatsBasic QualificationsBachelor's Degree or Master's Degree in Electrical Engineering, Computer Engineering, Software Engineering or related field AND a minimum of 1 year relevant experience OR an equivalent combination of education and experienceExcellent academics (cumulative GPA greater than or equal to 3.0 as a general rule)Demonstrated ability with application of design standards and procedures to design and develop moderately complex analog, digital and/or RF designs including simulations, schematics, PCB layouts and evaluationDemonstrated ability with electrical engineering toolsDemonstrated knowledge of design impacts on manufacturabilityDesired QualificationsOutstanding academics (cumulative GPA greater than or equal to 3.5)Previous work or internship experience with circuit design for consumer or aviation productsGarmin International is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, veteran's status, age or disability.This position is eligible for Garmin's benefit program. Details can be found here: Garmin Benefits.

OverviewWe are seeking a full-time Aviation Field Service Engineer 2 in our Olathe, KS location. In this role, you will be responsible for utilizing extensive knowledge of the specifications, capabilities, and operation of Garmin avionics products, and providing technical support on Garmin products to customers and distributors. Essential Functions Assist in the mentoring/coaching of new and less-experienced department associatesAnswer customer and installer technical inquiries regarding Garmin products via telephone, letter, fax, and e-mailTravel to customers' facilities to provide on-site support of avionics installations and troubleshooting as requiredArrange for return for factory repair of customer equipment and arrange for exchange of out-of-box failures of Garmin equipmentAct as liaison between customer and associates of other departments within Garmin and monitor, document, and report failure trends in Garmin equipmentIdentify/recommend improvements in Garmin products, documentation, and proceduresReview special circumstances and authorize warranty service when deemed appropriateReview pilot's guides, installation manuals, and maintenance manuals for completeness, technical accuracy, and areas likely to be misinterpretedProvide advanced level of support to fellow associates/Garmin customers by serving as the SME (Subject Matter Expert) for one of more Garmin avionic productsServe as a point of contact and liaise between Engineering and the customer, distributor, or FSE in support of any products with SME responsibilitiesAble to travel, coordinate, and represent Garmin at industry and professional meetings, trade shows and conferencesAbility to be on a rotation for 24/7 aviation technical support coverageAssist Senior FSE with mentoring/coaching of less experienced Field Service EngineersBasic Qualifications Associate's Degree or equivalent military/trade school OR a minimum of 4 years relevant experienceMust have served as a Garmin Field Service Engineer 1 for 2 years OR must have a minimum of 2 years experience with providing field service supportMust possess a minimum of 4 years experience in avionics installation and troubleshootingDemonstrated a high level of strong/effective verbal, written and interpersonal communication skills to work across functional and organizational linesMust demonstrate a superior customer-oriented attitudeMust demonstrate broad knowledge of aircraft systems and avionic sub-systemsMust possess proficiency using personal computers and Microsoft OfficeMust possess the ability to LRU level troubleshoot and repair various avionic systemsMust be positive, detail oriented, organized, team oriented and a driven problem solver with proven success in solving difficult problems, multi-tasker, and self-starter with the ability to prioritize and work proactively in a fast paced, deadline-driven environmentDesired Qualifications Previous avionics experience in an aircraft maintenance facility and/or an aircraft manufacturing environmentPilot's LicenseExperience troubleshooting and installing Garmin avionics systemsGarmin International is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, veteran's status, age or disability.This position is eligible for Garmin's benefit program. Details can be found here: Garmin Benefits

OverviewWe are seeking a full-time Process Engineer 2 in our Olathe, KS location with the Mechanical Assembly Team. In this role, you will be responsible for complex process development and the support of multiple aviation units, the creation of work cell environments and the justification and procurement of equipment needed while operating in a team-oriented environment. The Mechanical Assembly Team (MAT) is responsible for the unit level assembly and packaging of all Garmin products. Most of the units are assembled in a work cell environment by manual or semi-automated methods. The Process Engineer's main responsibility is to design work areas that produce the highest quality product, in the shortest amount of time, using the most economical method, while delivering a product that exceeds the customer's expectations. Essential FunctionsMay serve as a leader for small projects or sub projects for a new unit in development or a group of mature units following established proceduresDevelop more complex process instructions for manufacturing associatesResearch and develop new, cutting-edge automation concept to meet the processEstimate level of effort for a task including calculating build timesAttend continuous improvement meetings and serve as a member of Kaizen teamsCollaborate and add value through participation in design reviews, apply design for manufacturability guidelines to design reviews, and provide alternative solutions as appropriateAssess factory associates for certification to a processDevelop designed experiments for process and quality improvementsAnalyze processes for quality improvements and provide justification for purchasesDemonstrate excellent communication skills in collaboration with vendors that produce custom parts or equipmentAnalyze data to determine quality trends, find technical root causes and implement corrective actions for given problemsDesign custom tooling as needed for specific applications using CAD software toolsProvide reliable solutions to a variety of problems using sound problem solving techniquesServe as a mentor to less experienced process engineers (Process Engineer 1)Apply a sense of urgency, commitment and focus on the right priorities in developing solutions in a timely fashion and participate in recruiting activities as assignedAbility to travel domestically and internationally on occasionDesign, test and validate all aspects of the mechanical designModel moderately complex parts and assemblies in 3D CAD softwareIndependently determine general approach and specific solutions to technical problems Apply knowledge of production and operations processes to overall designInteract with product design engineers to incorporate Design for Manufacturability principlesInterface with outside teams and individuals to ensure all solutions comply with product design specificationsGenerate revision-controlled design and user documentationProject manage and collaborate with fellow project stakeholdersConduct training for equipment operators and maintenance techniciansTroubleshoot, support and continuously improve existing automated solutionsBasic QualificationsBachelor's Degree in Mechanical, Industrial, or Manufacturing Engineering or related field AND a minimum of 3 year relevant experience OR an equivalent combination of education and experienceExcellent academics (cumulative GPA greater than or equal to 3.0 as a general rule)Demonstrates full use of industry standards and proceduresDemonstrates proficiency and knowledge in use of engineering toolsDemonstrates beginner level programming abilities and experienceDemonstrates use of Lean techniques in process developmentDemonstrates strong and effective verbal, written, and interpersonal communication skills Desired QualificationsOutstanding academics (cumulative GPA greater than or equal to 3.5)Previous work or internship experience in a manufacturing environmentSix Sigma CertificationPrevious experience with AS9100 and NADCAPDemonstrated Proficiency in Microsoft Office applicationsExperience using 2D and 3D CAD design software (AutoCAD, Solidworks)Design experience with fixturing, pneumatics, sensors and safety controlsWorking knowledge of modern machining and rapid prototyping capabilitiesGarmin International is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, veteran's status, age or disability.This position is eligible for Garmin's benefit program. Details can be found here: Garmin Benefits

OverviewWe are seeking a full-time Architectural Engineer in our Olathe, KS location. In this role, you will be responsible for applying engineering principles and techniques to optimize the facility in a manufacturing environment to meet organizational objectives which includes ensuring proper installations, renovations and maintenance of facility systems to minimize production delays, leading facility improvement projects, developing robust facility maintenance plans, implementing network solutions for facility capability monitoring and ensuring compliance with workplace safety, health and other regulatory requirements. Essential FunctionsApply engineering principles/techniques to optimize the facility engineering in a manufacturing environment to meet organizational objectivesCollaborate with senior leadership, process engineers, industrial engineers, automation engineers and design engineers to establish facility requirements necessary to support future growthAnalyze contractor proposals for compliance to facility growth requirements, regulatory requirements, capacity needs, system scalability, serviceability, cost controls and suggest alternative solutionsEnsure proper installations, renovations and maintenance of facilities to minimize production delaysLead facility improvement projectsAdopt new technologies to improve facility systems including, but not limited to, factory temperature/humidity regulation, compressed air supply, liquid/gaseous nitrogen supply, oxygen monitoring, air particle reduction/cleanroom, conductive flooring, wastewater treatment, electrical & plumbing systems, lead abatement, etc.Determine equipment/facility specifications meet a facility's needs or standardsPrepare budgets and analyze project costsUnderstand manufacturing requirements/specifications to design and oversee implementation of facility expansion, layouts, various systems, and quality controlsEnsure compliance with relevant regulations, building codes, and health/safety standardsPrepare reports and compliance documentationInform senior leadership of facility and utility specifications to support decision-makingRecommend/oversee contractors handling construction and maintenance tasksPredict problems or risks and develop plans to avoid or mitigate themDetermine project timelines and time constraintsDetermine space requirements for various functions and plan or improve production methods including layout, lean production flow, tooling and production equipment, material, fabrication, assembly methods and staffing requirementsPartner with site-wide facilities team to develop and implement robust preventive maintenance programs for manufacturing facilities and mechanical systemsImplement network solutions to monitor facility performance data to establish good control parametersAssist in planning and tracking all maintenance work and investigate root cause of facilities failuresLead continuous improvement projects and explore opportunities for additional improvement projectsMaintain quality assurance system related to facility maintenance, operational systems and facility infrastructure to ascertain and improve operational efficienciesConduct regular inspections of facilities to identify potential hazards and ensure compliance with local and federal regulationsIdentify opportunities to improve energy efficiency and sustainabilityMaintain accurate records of maintenance and repair activities, as well as expenses/budgetingEnsure compliance with workplace safety, health and other regulatory requirementsMonitor on-going operational costsReview and maintaining logbooks for completion of maintenance tasksCommunicate with planning and design staff concerning new product introduction and assure sufficient facility resources exist to supportEvaluate operational systems and recommend design modifications to eliminate causes of malfunctions or changes in system requirements when necessaryBasic QualificationsBachelor Degree in Electrical Engineering, Mechanical Engineering, Industrial Engineering, Architectural Engineering or another related engineering disciplineExcellent academics (cumulative GPA greater than or equal to 3.0 as a general rule) with the demonstrated ability to apply learned knowledgeMust possess a minimum of 1 year experience as a facilities engineer in a manufacturing environmentExperience with AutoCAD, Oracle, and MS OfficeStrong understanding of mechanical, electrical, HVAC and plumbing systemsExperience in project management, including budgeting and schedulingKnowledge of the building process and construction principlesKnowledge of relevant regulations and building codesDemonstrated strong and effective verbal, written, and respectful interpersonal communication skillsPossess troubleshooting and problem-solving skills and demonstrated project management skillsMust be team-oriented, possess a positive attitude, work well with others, and able to guide/mentor less experienced engineersDesired Qualifications2+ years relevant manufacturing experienceFE or PE licenseExperience with energy efficiency and sustainability initiativesProfessional certification in Leadership in Energy and Environmental Design (LEED)Garmin International is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, veteran's status, age or disability.This position is eligible for Garmin's benefit program. Details can be found here: Garmin Benefits