Transport Engineer Salary in California, USA

Network Engineer II * Unified CommunicationsJob LocationsUS-CA-Redwood CityReq No.2020-5777CategoryITTypeRegular Full-TimeSummary of Major ResponsibilitiesThe Network Engineer II position is designed for persons with at least five years of experience working within the Cisco-based networking field.  This position supports the hardware and software inclusive of the local, metropolitan, and wide-area networks.  The position is responsible for problem resolution, general support, and leads projects related to the network infrastructure of Exact Sciences, its partners, and affiliates.  The Network Engineer II will act as a key technical resource for third-level support and will work both independently and as part of a team in a department with a strong customer service focus.  This position participates in, and often leads both design and implementation of solutions within the entire network engineering technology stack and provides input to management regarding process and technological improvements.  This role will have the primary responsibility of supporting the Unified Communications environment for the entire Exact Sciences enterprise network.  This encompasses Cisco Unified Communications Manager as well as Microsoft Skype for Business and Microsoft Teams voice services.  The role be second level support for device provisioning while holding primary responsibility of enterprise wide application management.Essential Duties and ResponsibilitiesUnder general guidance, design, develop, install, support, and maintain hardware and software infrastructure according to best practices; including routers, switches, wireless access points, wireless controllers, and firewalls.Diagnose problems and lead issue resolution, often under time constraints.Provide significant input into designing and implementing the necessary controls and procedures to protect information systems assets from intentional or inadvertent modification, disclosure, or destruction.Create and maintain network documentation.Ability to understand complex network environments. Ability to develop and follow effective test plans.Ability to create an enterprise class network design when given business requirements.Monitor network usage to proactively anticipate problems and suggest possible solutions.Ensure enterprise class solutions are continuously provided by designing and implementing resilient, reliable, and documented systems that are appropriately supported.Work closely with colleagues to meet team goals and improve processes and procedures. Remain current on emerging technologies via professional groups, trade magazines, internal and external training, independent research and study, and other avenues available.Play a critical role in planning future business systems improvements.Willingness to learn, along with the ability to take and provide direction, and work collaboratively as part of a team that is geographically diverse.Excellent interpersonal skills.Excellent communication skills.Ability to operate in a cross-cultural and complex environment.Ability to build consensus across functions.Willingness to regularly work outside of normal business hours, when required, for support and implementations.Uphold company mission and values through accountability, innovation, integrity, quality, and teamwork.Support and comply with the company’s Quality Management System policies and procedures.Regular and reliable attendance.Ability to lift up to 40 pounds for approximately 5% of a typical working day. Ability to work on a 10-foot ladder.Ability to work on a mobile device, tablet, or in front of a computer screen and/or perform typing for approximately 100% of a typical working day. Ability to work on a computer and phone simultaneously. Ability to travel 5% of working time away from work location, may include overnight/weekend travel.QualificationsMinimum QualificationsBachelor’s degree in Computer Sciences or related field; or Associates degree and 2 years of relevant experience in lieu of Bachelor’s degree.5+ years of experience with Windows, Mac, and iOS systems.3+ years of experience working in Cisco based technology stack.3+ years of experience configuring and supporting an EIGRP based network.3+ years of experience with network traffic analysis, remote access methods and systems, stateful inspection firewalls, encryption, authentication, and authorization technologies.Ability to describe, in detail, a broad range of application transport and network protocols; including SSL/TLS, DNS, DHCP, CAPWAP, STP, SFTP, HTTP/HTTPS, SMTP, SNMP, NAT, LDAPS, OSPF, BGP, and EIGRP.Ability to describe, in detail, the OSI Model.Demonstrated ability to perform the Essential Duties of the position with or without accommodation.Authorization to work in the United States without sponsorship.Preferred QualificationsBachelor’s degree in Computer Sciences or related field.5+ years of experience working in Cisco based technology stack.3+ years of experience supporting Cisco Unified Communications Manager.2+ years AWS experience with EC2 based appliances.1+ years of experience supporting Microsoft Skype For Business.1+ years of experience using Microsoft Teams.1+ years of experience provisioning SIP trunks on any platform.CCNP, CCVP, or MSCE Communication certification.Strong oral, written, communications, and presentation skills.Ability to work independently with minimal supervision.Ability to work under pressure and adhere to deadlines.We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to age, color, creed, disability, gender identity, national origin, protected veteran status, race, religion, sex, sexual orientation, and any other status protected by applicable local, state or federal law. Applicable portions of the Company’s affirmative action program are available to any applicant or employee for inspection upon request.

Location: REMOTESalary: $55.00 USD Hourly - $65.00 USD HourlyDescription: Remote The successful candidate will be responsible for the advanced configuration and operating system upgrades of carrier-class Cisco, Juniper and Nokia equipment that tie together a complex, multivendor nationwide data network. The Engineer will also be responsible for working on up-and-coming virtualization technologies in the Pacific and North Central Markets. They will assist with and perform implementation responsibilities for one or more COINs and work closely with the Implementation and Engineering teams to carry out our strategic technology goals and transition from VXLAN to the eNSE platform. This new network leverages virtualization and software defined networking to transform how we provide products and services while maintaining our position as the industry leader. Company is seeking a motivated and driven engineering professional who will assume responsibilities for engineering IP networking build projects and work closely with the Capacity Planning, Design and Operations teams to implement our strategic technology goals. • Work 3rd shift, 8-hours, 5-day work weeks (Monday-Friday mornings) • Plan, prioritize, and schedule maintenance window changes with many groups both inside and outside the office with minimum supervision during the daytime and then implement these changes during scheduled maintenance windows while adhering to corporate standards • You will need hands-on experience configuring routers, switches, and related network equipment. Preferably: Cisco Carrier Routing Systems (CRS), Cisco Network Convergence System (NCS), ASR 9K, ISR 3945, Nexus 3K, 7K, 9K, Juniper MX-480, MX-960. Operating Systems: IOS, XR-IOS, NX-OS, JunOS. Implement configuration changes for the directional Intelligent Edge Networks. These include but are not limited to: SAP eNSE fabric, Access eNSE fabric, EPC element migration to eNSE, ISP peering routers, VCP Edge connectivity, eNSE connectivity to MSE and UT • Leveraging automation tools like Python, NSO, DCNM, VTS, Pronghorn and Nuage to complete the above projects • Transport circuit turn up/troubleshooting • Turn up new and disconnect older circuits of varying bandwidths using procedures written by both an internal engineering group and outside vendors. The work is done in parallel with other internal groups • Work remotely with local operation team members throughout the United States to deploy and troubleshot newly installed racked routers and switches into Company data center locations. • Work independently with minimum supervision and meet aggressive deployment dates and timelines • Ability to quickly adapt and learn new tasks and processes around deploying new routers and switches in a remote setting • Engineering the network configuration for the onboarding of Company private cloud tenants • Solid understanding of Networking specific technologies: IPV6, L2VPN, L3VPN, OSPFv3, MPBGP, QOS/Traffic Engineering, MPLS (LDP & TDP) and VRFs • Perform BAU maintenance work such as ACL updates and software upgrades on border leafs, access leafs, and spines on the eNSE fabric • Utilize network monitoring tools, during maintenance windows, to ensure that all monitored network equipment is functioning in accordance with company standards and policies, both before and after changes are made • Be proficient with network configuration compare tools such as Ultra compare, Diff Checker, Notepad ++ • Take accountability to review MOPs and automated dry-run outputs with the engineering team before any scheduled change to ensure accuracy • Required to attend daytime MOP review and team/project synch meetings • Regularly assist team members in an "overwatch" role during cutovers, migrations, and upgrades through network monitoring tools to ensure customer service interruptions do not occur • Engage in both intra and interdepartmental communication to plan, schedule, prioritize, and prepare for maintenance window activities • Enter all night changes into the change management database "Kirke" and ensure all notifications are approved prior to maintenance window activities • Work closely with local onsite Network Assurance team to validate no customer impacts were sustained to our customers. All pre/post configuration/traffic checks will need to be performed on each device being worked on MUST HAVE SKILLS (Most Important): • Bachelor's degree or four or more years of work experience • Willingness to work a flexible schedule, including nights and an occasional weekend as necessary. • Positive attitude, strong work ethic, and a desire to do your best each day • Must possess extensive knowledge of Layer 1 troubleshooting for copper and fiber cabling including Cat5/6 copper cabling and fiber types of SC, LC, FC, MPO, MOP creation and implementation • Must have in depth knowledge and expert comprehension of Command Line Interface (CLI) commands for Nokia 7750/7706/7250, Cisco 55A1,5504, 5508, 9508, CRS-16, Nexus 3k/5k/7K/9K (IOS, XE, XR, NX-OS) • Experience with IP Layer 1-3 for Edge Networks and strong knowledge of MPLS • Hands on experience with virtualization of networks and implementing updates and changes on working devices • Ability to follow and implement detailed engineering design documents • The ability to articulate and explain your work and self through email and phone. • Knowledgeable in Layer 1 remote connectivity to network devices via console and Ethernet, copper (CAT5/6) and SC, LC, MPO fiber cabling • Ability to work closely with others, manage the workload you are assigned, and schedule work/project manage tasks with other installation teams and groups • Ability to clearly communicate ideas in order to lead phone calls to implement changes and thoroughly test for any residual issues afterwards during maintenance window hours. • Need to be comfortable working on the phone and troubleshooting with local support personnel to correct OBM (Out of Band Management) and Ethernet/fiber cabling issues. • Functional knowledge of TCP/IP (IPv4 and IPv6) • They must have the ability to follow and implement detailed engineering design documents and join team/project calls throughout the day in various US time zones and have the ability to convey status and work updates • Administrative skills to track and update emails, tickets, projects, and work logs • Knowledge of spine and leaf fabric networking • Working knowledge of VXLAN and BGP • Ability to pay CLOSE attention to details and be a thorough will all aspects of your work DESIRED SKILLS: • A bachelor's degree • CCNA or CCNP certifications • Hands on experience with Nokia SR-OS devices • Experience with virtualization technology in a corporate environment • Knowledge of Cloud Computing (VMWare, Openstack, AWS, Azure, or similar). Some experience with data center and cloud technologies such as Linux OS, VMware, Open-Stack, Ansible, Chef/Puppet and/or Docker • Five or more years of experience that involved working on large, complex data networks. • Experience working with data networking gear and troubleshooting data networking problems involving: TCP/IP, BGP, MP-BGP, OSPF, MPLS, IPv4, IPv6, L2VPN, L3VPN, SIP, and other advanced LAN/WAN technologies and concepts • Experience with planning for multiple technical projects AND implementing them by working with people using multiple lines of communications (phone, e-mail, face to face, etc.) in order to deliver them on time • Good understanding of 3G and 4G call flow EDUCATION/CERTIFICATIONS: • Bachelor's degree or four or more years of relevant work experience Contact: [email protected] job and many more are available through The Judge Group. Find us on the web at www.judge.com

Job ID: SOFTW012365Position Title: Software Engineer III – Mobile (Multiple Openings)Company/Employer: Uber Freight US LLCLocation: 1725 3rd Street, San Francisco, CA 94103JOB DUTIES AND RESPONSIBILITIES:Develop and/or test IOS applications using company technology stack.Apply technical knowledge to evaluate complex data, developments, and projects in order to provide recommendations to resolve technical issues.Support the company’s business operations and improve engineering productivity.Integrate and automate the very steps that transport products every day.Build software components that can be integrated into a fully functional software system.Work alongside Product Managers, Designers, Data Scientists and Operators to understand what's most important and translate that to systems, designs, and scalable code.Work under diverse scope.Select methods or techniques for solutions.Work independently with very little daily supervision.MINIMUM EDUCATION/EXPERIENCE REQUIREMENTS:Requires a Bachelor's degree in Computer Engineering, Computer Science, or a directly related field of study.3 years of related experience with iOS development;3 years of experience with high quality User Interface (UI) experience;3 years of experience analyzing a feature in production using analytics;3 years of experience analyzing a feature in production using experiments;3 years of experience in iOS Software Development Kit (SDK);3 years of experience developing in Swift;3 years of experience in Lottie;1 year of experience with mobile release;1 year of experience with application publication; and2 years of experience with testing and testability in EACH of the following:iOSMobile applicationsExperience may be gained concurrently.Work from home available. Must reside within commuting distance from the employer's San Francisco, CA office.SALARY RANGE: $164,857.00/year to $208,920.00/year

Location: REMOTESalary: $55.00 USD Hourly - $60.00 USD HourlyDescription: Our client is currently seeking a Network Engineer - III Job description:The successful candidate will be responsible for the advanced configuration and operating system upgrades of carrier-class Cisco, Juniper and Nokia equipment that tie together a complex, multivendor nationwide data network. The Engineer will also be responsible for working on up-and-coming virtualization technologies in the Pacific and North Central Markets. They will assist with and perform implementation responsibilities for one or more COINs and work closely with the Implementation and Engineering teams to carry out our strategic technology goals and transition from VXLAN to the eNSE platform. This new network leverages virtualization and software defined networking to transform how we provide products and services while maintaining our position as the industry leader. We are seeking a motivated and driven engineering professional who will assume responsibilities for engineering IP networking build projects and work closely with the Capacity Planning, Design and Operations teams to implement our strategic technology goals. ? Work 3rd shift, 10-hours, 4-day work weeks (Tuesday-Friday mornings) ? Plan, prioritize, and schedule maintenance window changes with many groups both inside and outside the office with minimum supervision during the daytime and then implement these changes during scheduled maintenance windows while adhering to corporate standards. ? You will need hands-on experience configuring routers, switches and related network equipment. Preferably: Cisco Carrier Routing Systems (CRS), Cisco Network Convergence System (NCS), ASR 9K, ISR 3945, Nexus 3K, 7K, 9K, Juniper MX-480, MX-960. Operating Systems: IOS, XR-IOS, NX-OS, JunOS. Implement configuration changes for the directional Intelligent Edge Networks. These include but are not limited to: SAP eNSE fabric, Access eNSE fabric, EPC element migration to eNSE, ISP peering routers, VCP Edge connectivity, eNSE connectivity to MSE and UT ? Leveraging automation tools like Python, NSO, DCNM, VTS, Pronghorn and Nuage to complete the above projects. ? Transport circuit turn up/troubleshooting ? Turn up new and disconnect older circuits of varying bandwidths using procedures written by both an internal engineering group and outside vendors. The work is done in parallel with other internal groups. ? Work remotely with local operation team members throughout the United States to deploy and troubleshot newly installed racked routers and switches into data center locations ? Work independently with minimum supervision and meet aggressive deployment dates and timelines ? Ability to quickly adapt and learn new tasks and processes around deploying new routers and switches in a remote setting ? Engineering the network configuration for the onboarding of private cloud tenants ? Solid understanding of Networking specific technologies: IPV6, L2VPN, L3VPN, OSPFv3, MPBGP, QOS/Traffic Engineering, MPLS (LDP & TDP) and VRFs ? Perform BAU maintenance work such as ACL updates and software upgrades on border and access leafs and spines in eNSE. ? Utilize network monitoring tools, during maintenance windows, to ensure that all monitored network equipment is functioning in accordance with company standards and policies, both before and after changes are made. ? Be proficient with network configuration compare tools such as Ultracompare, Diff Checker, Notepad ++. ? Take accountability to review MOPs and automated dry-run outputs with the engineering team before any scheduled change to ensure accuracy. ? Required to attend daytime MOP review and team/project synch meetings. ? Regularly assist team members in an ?overwatch? role during cutovers, migrations, and upgrades through network monitoring tools to ensure customer service interruptions do not occur. ? Engage in both intra and interdepartmental communication to plan, schedule, prioritize, and prepare for maintenance window activities. ? Enter all night changes into the change management database ?Kirke? and ensure all notifications are approved prior to maintenance window activities. ? Work closely with local onsite Network Assurance team to validate no customer impacts were sustained to our customers. All pre/post configuration/traffic checks will need to be performed on each device being worked on. MUST HAVE SKILLS (Most Important): ? Bachelor?s degree or four or more years of work experience ? Willingness to work a flexible schedule, including nights and an occasional weekend as necessary. ? Positive attitude, strong work ethic, and a desire to do your best each day ? Must possess extensive knowledge of Layer 1 troubleshooting for copper and fiber cabling including Cat5/6 copper cabling and fiber types SC, LC, FC, MPO, MOP creation and implementation ? Must have in depth knowledge and expert comprehension of Command Line Interface (CLI) commands for Nokia 7750/7706/7250, Cisco 55A1,5504, 5508, 9508, CRS-16, Nexus 3k/5k/7K/9K (IOS, XE, XR, NX-OS) ? Experience with IP Layer 1-3 for Edge Networks and strong knowledge of MPLS ? Hands on experience with virtualization of networks and implementing updates and changes on working devices ? Ability to follow and implement detailed engineering design documents ? The ability to articulate and explain your work and self through email and phone. ? Knowledgeable in Layer 1 remote connectivity to network devices via console and Ethernet, copper (CAT5/6) and SC,LC,MPO fiber cabling ? Ability to work closely with others, manage the workload you are assigned, and schedule work/project manage tasks with other installation teams and groups ? Ability to clearly communicate ideas in order to lead phone calls to implement changes and thoroughly test for any residual issues afterwards during maintenance window hours. ? Need to be comfortable working on the phone and troubleshooting with local support personnel to correct OBM (Out of Band Management) and Ethernet/fiber cabling issues. ? Functional knowledge of TCP/IP (IPv4 and IPv6) ? They must have the ability to follow and implement detailed engineering design documents and join team/project calls throughout the day in various US time zones and have the ability to convey status and work updates ? Administrative skills to track and update emails, tickets, projects, and work logs. ? Knowledge of spine and leaf fabric networking ? Working knowledge of VXLAN and BGP ? Ability to pay CLOSE attention to details and be a thorough will all aspects of your work DESIRED SKILLS: ? A bachelor?s degree. ? CCNA or CCNP certifications. ? Hands on experience with Nokia SR-OS devices. ? Experience with virtualization technology in a corporate environment. ? Knowledge of Cloud Computing (VMWare, Openstack, AWS, Azure, or similar). Some experience with data center and cloud technologies such as Linux OS, VMware, Open-Stack, Ansible, Chef/Puppet and/or Docker. ? Five or more years of experience that involved working on large, complex data networks. ? Experience working with data networking gear and troubleshooting data networking problems involving: TCP/IP, BGP, MP-BGP, OSPF, MPLS, IPv4, IPv6, L2VPN, L3VPN, SIP, and other advanced LAN/WAN technologies and concepts. ? Experience with planning for multiple technical projects AND implementing them by working with people using multiple lines of communications (phone, e-mail, face to face, etc.) in order to deliver them on time. ? Good understanding of 3G and 4G call flow. EDUCATION/CERTIFICATIONS: ? Bachelor?s degree or four or more years of relevant work experience Contact: [email protected] job and many more are available through The Judge Group. Find us on the web at www.judge.com

Job Req ID: 24995About Supermicro:Supermicro is a Top Tier provider of advanced server, storage, and networking solutions for Data Center, Cloud Computing, Enterprise IT, Hadoop/ Big Data, Hyperscale, HPC and IoT/Embedded customers worldwide. We are the #5 fastest growing company among the Silicon Valley Top 50 technology firms. Our unprecedented global expansion has provided us with the opportunity to offer a large number of new positions to the technology community. We seek talented, passionate, and committed engineers, technologists, and business leaders to join us.Job Summary:As a global leader for networking solution innovation, Supermicro's mission is to develop and provide the market with end-to end computing solution and high performance networking products. The Manufacturing Engineer will be responsible for leading a group of Engineers to perform DFMA review, analysis and review final report. The Manufacturing Engineer will also be reviewing the new and existing product design from raw material, PCBA, mechanical, electronic and system integration to ensure not only the Supermicro products meets the industrial and company quality standard but also the best optimization. We are looking for a highly motivated individual who is ready to work beyond boundaries and capable of doing what it takes to meet the goals.Essential Duties and Responsibilities:• Review and improve the current DFMA process • Reviewing and facilitating the early-stage product design reviews, working with all cross functional teams at all levels to make the manufacturing and assembly process more robust, less cost and more smoothness in mass production manufacturing environment to meet high customer demands • Perform hardware system/board/component debug/analysis/trouble shooting and related tasks • Work closely with design teams to review and improve product designIncludes the following essential duties and responsibilities (other duties may also be assigned): • Transport, disassemble, re-assemble, diagnose and analyze the products for correction, enhancement and improvement • Search for MRP, BOM, ECO/ECN, part specs, design documents, assembly instructions, test reports, production assembly record, quality data, RMA data, ISO documents, industrial standards, etc. • Assign team members to take product photos, generate formal DFMA report and post finding items on intranet • Ensure all DFMA record in system and follow up findings with other related teams for solution and closure, work with IT to optimize DFMA database • Review/Generate 8D report, deep understanding of root cause analysis and tools used such as fish bone diagram, Pareto chart, 5 whys, FMEA Qualifications:• BS in Mechanical Engineering, Computer Science or Engineering or Electrical Engineering; MS degree is preferred • Minimum 5+ years of relevant work experiences with manufacturing and quality on PCBA and system level assembly in computing industry (storage, server and cloud) • Influent with MS Office Excel, Word, and PowerPoint • Knowledge of PCB/PCBA, Allegro, Valor is desirable • Established capability in reducing defects and improving process such as 6 Sigma, SPC and DOE • Excellent communication skills within cross functional teams with varying levels of technical expertise • Contract manufacturing experience, additional certificates and licenses are considered a plus • Active/proactive learner aligns to the latest new technologySalary Range$82,000 - $133,000The salary offered will depend on several factors, including your location, level, education, training, specific skills, years of experience, and comparison to other employees already in this role. In addition to a comprehensive benefits package, candidates may be eligible for other forms of compensation, such as participation in bonus and equity award programs.EEO StatementSupermicro is an Equal Opportunity Employer and embraces diversity in our employee population. It is the policy of Supermicro to provide equal opportunity to all qualified applicants and employees without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status or special disabled veteran, marital status, pregnancy, genetic information, or any other legally protected status.

Location: REMOTESalary: $50.00 USD Hourly - $60.00 USD HourlyDescription: Our client is currently seeking a Network Engineer - III Job description:JOB DUTIES: The successful candidate will join the Core Network Engineering and Implementation team with responsibilities for engineering new eNSE platform located within data center throughout the United States. Being a part of the Network Build Team, you will assist with and perform implementation responsibilities and work closely with diverse Engineering teams to carry out our strategic technology goals and transition from VXLAN to the eNSE platform. This new network leverages virtualization and software defined networking to transform how we provide products and services while maintaining our position as the industry leader. We are seeking a motivated and driven engineering professional who will assume responsibilities for engineering IP networking build projects and work closely with the Capacity Planning, Design and Operations teams to implement our strategic technology goals. The candidate will work to create an environment of teamwork and cooperation with all stakeholders including: territories, edge, and design. • The Network Engineer's main responsibilities include writing technical and detailed Layer 1 equipment installation and fiber testing Method of Procedures (MOP), scheduling/tracking and correcting testing failures and working with local market team members throughout the United States to deploy and troubleshot newly installed racked routers and switches in Wireless MSCs (Mobile Switching Centers) • Develop network configurations from design models/templates by creating MOPs for Engineers to implement during network maintenance windows • Hands-on experience configuring routers, switches and related network equipment. Preferably: Cisco Carrier Routing Systems (CRS), Cisco Network Convergence System (NCS), ASR 9K, ISR 3945, Nexus 3K, 7K, 9K, Juniper MX-480, MX-960. Operating Systems: IOS, XR-IOS, NX-OS, JunOS. • Work remotely with local operation team members throughout the United States to deploy and troubleshoot newly installed racked routers and switches into data center locations • Work independently with minimum supervision and meet aggressive deployment dates and timelines • Ability to quickly adapt and learn new tasks and processes around deploying new routers and switches in a remote setting • Mentor new team members when they join the group and introduce them to all aspects of the job • Utilize automated workflows to assist with device configuration and provide feedback on improvements • The candidate will work to support strategic technology goals including the ongoing migration of core elements to the intelligent edge network • Work on engineering and deploying directional networks for Intelligent Edge including but not limited to: SAP ENSE Fabric, Access ENSE fabric, ISP, NNI and 5G connectivity • Engineer and create network configurations for the onboarding of private cloud tenants • Responsible for engineering IP edge networks at Service Aggregation Points (SAP) and Transport Aggregation Points (TAP) • Building networks for interconnection to Cloud Platforms (VCP) for growth, capacity and expansion • Engineering network solutions with a strong interaction with PNF and VNF applications teams • Working with underlay and overlay controllers for network creation, network modeling, and network deployments. Leveraging plugins for network deployments across multiple virtualized OS environments. • Overseeing network builds from procurement to "In Service" • Work with peer teams to ensure new networks are built and migrated to meet KPI's and company objectives • Work collaboratively with existing team members to meet team goals MUST HAVE SKILLS (Most Important): • Bachelor's degree or four or more years of relevant work experience • Experience with IP Layer 1-3 for Edge Networks • Hands on experience with virtualization of networks and implementing updates and changes on working devices • Functional knowledge of TCP/IP (IPv4 and IPv6) • Knowledge of spine and leaf fabric networking • Working knowledge of VXLAN and BGP • Must possess extensive knowledge of Layer 1 troubleshooting for copper and fiber cabling including Cat5/6 copper cabling and fiber types SC, LC, FC, MPO, MOP creation and implementation • In depth knowledge and expert comprehension of Command Line Interface (CLI) commands for Nokia 7750/7706/7250, Cisco 55A1,5504, 5508, 9508, CRS-16, Nexus 3k/5k/7K/9K (IOS, XE, XR, NX-OS) • Must possess the ability to work on multiple projects at the same time, stay organized/prioritize their workload, and make updates to tickets/spreadsheets/deployment schedules. • Need to be comfortable working on the phone and troubleshooting with local support personnel to correct OBM (Out of Band Management) and Ethernet/fiber cabling issues. • Have the ability to follow and implement detailed engineering design documents and join team/project calls throughout the day in various US time zones and have the ability to convey status and work updates. • Administrative skills to track and update emails, tickets, projects, and work logs. DESIRED SKILLS: • Positive attitude, strong work ethic, and a desire to do your best each day • CCNA/JNCIS or other networking certifications • Ability to work closely with others, manage the workload you are assigned, and schedule work/project manage tasks with other installation teams and groups • Ability to follow and implement detailed engineering design documents • Past experience working in a remote environment and testing newly installed switches and routers • The ability to articulate and explain you work and self through email and on the phone • Experience with MPLS Layer 2 and Layer 3 VPNs • Worked with Cisco (VTS), Nokia (Nuage) or Itential (IAP), HPNA, DCNM automation tools • Solid understanding of networking-specific technologies: IPV6, L2VPN, L3VPN, OSPFv3, mp-BGP, QOS/Traffic Engineering, MPLS (LDP & TDP), inter-AS MPLS, and m-VPN • A strong ability to understand end to end call flows for deploying network services • Knowledge of or prior experience with cloud and scripting experience in Linux, Openstack, Python and virtualization • Any cloud and scripting experience i.e. Linux, Openstack, Python, automation, virtualization EDUCATION/CERTIFICATIONS: Bachelor's degree or four or more years of relevant work experience LOGISTICS: 40 hour work week daytime shift no overtime. Occasional overnight maintenance support. Contact: [email protected] job and many more are available through The Judge Group. Find us on the web at www.judge.com

Location: REMOTESalary: $50.00 USD Hourly - $70.00 USD HourlyDescription: Title- Network Engineer III Location- Bedminster, NJ (100% Remote)Duration- Long-term contractJOB DESCRIPTION: The successful candidate will join the Core Network Engineering and Implementation team with responsibilities for engineering Client's new eNSE platform in the Pacific and North Central Markets. Being a part of the Network Build Team, you will assist with and perform implementation responsibilities throughout the central and western parts of the United States and work closely with the Implementation and Engineering teams to carry out our strategic technology goals and transition from VXLAN to the eNSE platform. This new network leverages virtualization and software defined networking to transform how we provide products and services while maintaining our position as the industry leader. Client is seeking a motivated and driven engineering professional who will assume responsibilities for engineering IP networking build projects and work closely with the Capacity Planning, Design and Operations teams to implement our strategic technology goals. The candidate will work to create an environment of teamwork and cooperation with all stakeholders including: territories, edge, and design. • The Network Engineer's main responsibilities include writing technical and detailed Layer 1 equipment installation and fiber testing Method of Procedures (MOP), scheduling/tracking and correcting testing failures and working with local market team members throughout the United States to deploy and troubleshot newly installed racked routers and switches in Client MSCs (Mobile Switching Centers) • Develop network configurations from design models/templates by creating MOPs for Engineers to implement during network maintenance windows • Hands-on experience configuring routers, switches and related network equipment. Preferably: Cisco Carrier Routing Systems (CRS), Cisco Network Convergence System (NCS), ASR 9K, ISR 3945, Nexus 3K, 7K, 9K, Juniper MX-480, MX-960. Operating Systems: IOS, XR-IOS, NX-OS, JunOS • Work remotely with local operation team members throughout the United States to deploy and troubleshoot newly installed racked routers and switches into client data center locations • Work independently with minimum supervision and meet aggressive deployment dates and timelines • Ability to quickly adapt and learn new tasks and processes around deploying new routers and switches in a remote setting • Mentor new team members when they join the group and introduce them to all aspects of the job • Utilize automated workflows to assist with device configuration and provide feedback on improvements • The candidate will work to support client's strategic technology goals including the ongoing migration of core elements to the intelligent edge network • Work on engineering and deploying directional networks for Intelligent Edge including but not limited to: SAP ENSE Fabric, Access ENSE fabric, ISP, NNI and 5G connectivity • Engineer and create network configurations for the onboarding of client's private cloud tenants • Responsible for engineering IP edge networks at Service Aggregation Points (SAP) and Transport Aggregation Points (TAP) • Building networks for interconnection to client Cloud Platforms (VCP) for growth, capacity and expansion • Engineering network solutions with a strong interaction with PNF and VNF applications teams • Working with underlay and overlay controllers for network creation, network modeling, and network deployments. Leveraging plugins for network deployments across multiple virtualized OS environments • Overseeing network builds from procurement to "In Service" • Work with peer teams to ensure new networks are built and migrated to meet KPI's and company objectives • Work collaboratively with existing team members to meet team goals MUST HAVE SKILLS (Most Important): • Bachelor's degree or four or more years of relevant work experience • Experience with IP Layer 1-3 for Edge Networks • Hands on experience with virtualization of networks and implementing updates and changes on working devices • Functional knowledge of TCP/IP (IPv4 and IPv6) • Knowledge of spine and leaf fabric networking • Working knowledge of VXLAN and BGP • Must possess extensive knowledge of Layer 1 troubleshooting for copper and fiber cabling including Cat5/6 copper cabling and fiber types SC, LC, FC, MPO, MOP creation and implementation • In depth knowledge and expert comprehension of Command Line Interface (CLI) commands for Nokia 7750/7706/7250, Cisco 55A1,5504, 5508, 9508, CRS-16, Nexus 3k/5k/7K/9K (IOS, XE, XR, NX-OS) • Must possess the ability to work on multiple projects at the same time, stay organized/prioritize their workload, and make updates to tickets/spreadsheets/deployment schedules. • Need to be comfortable working on the phone and troubleshooting with local support personnel to correct OBM (Out of Band Management) and Ethernet/fiber cabling issues. • Have the ability to follow and implement detailed engineering design documents and join team/project calls throughout the day in various US time zones and have the ability to convey status and work updates. • Administrative skills to track and update emails, tickets, projects, and work logs. DESIRED SKILLS: • Positive attitude, strong work ethic, and a desire to do your best each day • CCNA/JSCIS or other networking certifications • Ability to work closely with others, manage the workload you are assigned, and schedule work/project manage tasks with other installation teams and groups • Ability to follow and implement detailed engineering design documents • Past experience working in a remote environment and testing newly installed switches and routers • The ability to articulate and explain you work and self through email and on the phone • Experience with MPLS Layer 2 and Layer 3 VPNs • Worked with Cisco (VTS), Nokia (Nuage) or Itential (IAP), HPNA, DCNM automation tools • Solid understanding of networking-specific technologies: IPV6, L2VPN, L3VPN, OSPFv3, mp-BGP, QOS/Traffic Engineering, MPLS (LDP & TDP), inter-AS MPLS, and m-VPN • A strong ability to understand end to end call flows for deploying network services • Knowledge of or prior experience with cloud and scripting experience in Linux, Openstack, Python and virtualization • Any cloud and scripting experience i.e. Linux, Openstack, Python, automation, virtualizationEDUCATION/CERTIFICATIONS: Bachelor's degree or four or more years of relevant work experienceLOGISTICS: 40 hour work week daytime shift no overtime. Occasional overnight maintenance support. Contact: [email protected] job and many more are available through The Judge Group. Find us on the web at www.judge.com

Meta is seeking a Connectivity Design Engineer to join our DEC Design team. Our Data Centers are the foundation upon which our rapidly growing infrastructure efficiently operates and our innovative services are delivered. This role is responsible for the design of inside and outside plant structured cabling and infrastructure for our data center installations - including new builds, retrofits, special projects, and technology modifications. Design Engineers must be capable of developing designs as well providing effective oversight of outsourced design work. In addition to assuring timely delivery of designs that meet (or exceed) project requirements, Design Engineers are expected to drive best practices and establish tools, processes, and standards consistent with large-scale data center deployments. Full design lifecycle engagement is required - with lessons learned from field deployments rolled into future programmatic designs. The Design Engineer is expected to collaborate effectively with internal and external stakeholders - assuring all structured cabling design requirements are met in design execution. Connectivity Design Engineer Responsibilities: Drive designated program initiatives end-to-end - from requirements gathering, to design development, cross-functional validation, and rollout.For special programs, drive global project execution in addition to program development.Actively seek and promote best design practices, processes, and improvements to establish program designs conducive to large-scale builds.Actively incorporate lessons learned from previous builds and design generations.Fluent interfacing with network transport and network architecture requirementsOversee the design execution of complete and correct construction documents, schematic diagrams, pathways, rack systems, rack elevations, cable matrices, and bills of materials, as needed for all OSP, ISP, and Network structured cabling and infrastructure elements.Assist with request for proposal (RFP) process & bid documentation coordination for both design and construction contracts as required.Streamline deployment of project deliverables on short timelines.Validate and proof project deliverables and executable design documentation at each design milestone.Engage in construction administration phase for design-driven elements that require technical depth that cannot be resolved directly by the Design Consultant or at the Site Level- such as change coordination and request for information (RFI) responses.Partner with internal and external teams to drive programmatically approved changes across applicable projects.Oversee and maintain documents reflecting project completion deliverables (i.e. as-built documentation), updating as required.Collaborate with internal stakeholders to deliver project designs meeting capacity and network requirements as well as rollout timelines.Drive scalable structured cabling solutions throughout Meta owned or operated data center spaces and support facilities.Serve as a Technical SME for programs and projects that one leads.Provide regular project status updates and support GDCC and corporate dashboards that capture delivery, cost, quality, and other established metrics.Participate in various team syncs to drive alignment, visibility, and consistency in program and project execution. Identify and respond to risks and high-priority issues timely and effectively.Travel as required (~10-25%) to review projects and coordinate with onsite personnel and contractors at project locations. Minimum Qualifications:Bachelor of Science degree in engineering or equivalent practical experience.10+ years of experience delivering engineering results.Demonstrated expertise in physical infrastructure design including structured cabling and fiber-optic cabling.Proven leadership experience such as leading large complex projects, leading teams, coordinating with a wide variety and diverse number of stakeholders.Comprehensive knowledge of and experience with fiber optic components, cabling, interconnect products, technologies, and standards.Effective prioritization skills to continuously analyze workload and qualify priorities based on impact and effort, often involving shifting deadlines and quick turnaround.Workflow efficiency and automation - demonstrated experience in improving/developing processes to drive efficiency, automating wherever possible.Construction experience such as site walks, punch lists, field coordination, RFIs, clash detection, lessons learned feedback loops, etc.Mission critical engineering project experience.Detail oriented, experience providing solutions to complex problems, and proven skill to effectively manage deadlines.Demonstrated experience effectively engaging with diverse stakeholders (internal and external) to extract, analyze, and qualify requirements to drive solutions from inception to completion.Experience with construction management applications (e.g. e-Builder, Unifier, BIM360, Procore). Preferred Qualifications:Network design experience, including Network/Transport Certification (CCNA or equivalent).Working knowledge of 40/100/400G Ethernet and CWDM, DWDM and optical transport network technologiesExperience with fiber topology evolution to achieve resiliency, and latency requirementsExperience with tooling & automation development (i.e. computer programming/scripting, database integration, dashboards, APIs).BICSI accreditation - RCDD / DCDC certification.PMP accreditation or similar. About Meta: Meta builds technologies that help people connect, find communities, and grow businesses. When Facebook launched in 2004, it changed the way people connect. Apps like Messenger, Instagram and WhatsApp further empowered billions around the world. Now, Meta is moving beyond 2D screens toward immersive experiences like augmented and virtual reality to help build the next evolution in social technology. People who choose to build their careers by building with us at Meta help shape a future that will take us beyond what digital connection makes possible today-beyond the constraints of screens, the limits of distance, and even the rules of physics. Meta is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state and local law. Meta participates in the E-Verify program in certain locations, as required by law. Please note that Meta may leverage artificial intelligence and machine learning technologies in connection with applications for employment. Meta is committed to providing reasonable accommodations for candidates with disabilities in our recruiting process. If you need any assistance or accommodations due to a disability, please let us know at [email protected].$144,000/year to $201,000/year + bonus + equity + benefitsIndividual compensation is determined by skills, qualifications, experience, and location. Compensation details listed in this posting reflect the base hourly rate, monthly rate, or annual salary only, and do not include bonus, equity or sales incentives, if applicable. In addition to base compensation, Meta offers benefits. Learn more about benefits at Meta.

The CompanyAre you looking to join an organization that is growing and dynamic? What about a high-energy, collaborative environment that rewards hard work?J.S. Held is a global consulting firm that combines technical, scientific, financial, and strategic expertise to advise clients seeking to realize value and mitigate risk. Our professionals serve as trusted advisors to organizations facing high stakes matters demanding urgent attention, staunch integrity, proven experience, clear-cut analysis, and an understanding of both tangible and intangible assets.The firm provides a comprehensive suite of services, products, and data that enable clients to navigate complex, contentious, and often catastrophic situations.The Team And Job SummaryWe are seeking a mid to senior-level Forensic Civil Structural Engineer (PE or SE) to enhance our already robust team of professionals supporting our clients throughout the US. Our engineers routinely perform forensic investigations, provide consultation, prepare and deliver technical papers; and serve as expert witnesses. Our areas of practice include residential, commercial, and industrial buildings' roofing, fenestration, foundation and envelopes; hazard assessments and resulting damage; design and construction defect evaluation; and premise liability evaluations. Assignments will require regular local and regional travel to project sites. Active involvement in professional associations and societies is encouraged and supported.Job Responsibilities Conducts field observations, testing and data collection. Prepares reports detailing observations made, testing results, research conducted, and opinions or recommendations. Works with building departments to determine repair directives. Conducts research and develops technical topics for publication. Meets with and presents to peers and clients. Engages in client-relations marketing.Required Qualifications Bachelor's degree in engineering (from an ABET accredited school required).PE or SE licenseHighly qualified and experienced EI/EITs are considered.7+ more years of experience as a forensic engineer.Familiar with modern building codes and industry standards. Excellent analytical and problem-solving skills. Excellent verbal and written communication and interpersonal skills. Willing to travel and conduct site inspections. A desire to learn, excel and grow with us and within the profession.Must reside in California.A valid driver's license.Preferred Qualifications. Testimony experience as a designated expert witness Experience in engineering design or construction Experience conducting damage assessments and forensic investigations (preferred but not required). Storm damage and building envelope evaluation experience is a plus.Physical And Mental Job Qualifications Must be able to lift up to 50 pounds at times. Must be able to travel to various project sites and conduct field investigations. Must be able to work at heights. Must be able to work in hot and cold environments, both indoors and outdoors. Must be able to periodically access and work on roofs, scaffolds, lifts, and other elevated surfaces and in enclosed spaces (attics, crawlspaces, etc.) with appropriate personal protection. Must be able to lift, transport, set up, and utilize an extension ladder to access roofs and other elevated surfaces. Physically able to climb, stand, walk, kneel, and crouch for extended periods of timeSome of the Benefits We Have IncludeJ.S. Held understands all our employees are people and sometimes life needs flexibility. We work to always provide an environment that best supports and suits our team's needs. Our flexible work environment allows employees to work remotely, when needed Flexible Time Off Policy Medical, Dental, and Vision Insurance 401k Match Commuter BenefitsA reasonable estimate of the salary range for this role is $110k - $150k. Any offered salary range is based on a wide array of factors including but not limited to skillset, experience, training, location, scope of role, management responsibility, etc.Other DutiesPlease note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.By submitting your application, you acknowledge that you have read the J.S. Held Online Privacy Notice and hereby freely and unambiguously give informed consent to the collection, processing, use, and storage of your personal information as required and described therein. California residents can click here to learn more about the personal information we collect and here to learn about additional privacy rights that may be available.AboutPlease explore what we're all about at www.jsheld.com.EEO and Job AccommodationsWe embrace diversity and our commitment to building a team and environment that fosters professional and personal enrichment is unwavering. We are greater when we are equal!J.S. Held is an equal opportunity employer that is committed to hiring a diverse workforce. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law.If you are an individual with a disability and would like to request for a reasonable accommodation, please email [email protected] and include "Applicant Accommodation" within the subject line with your request and contact information.

Key Details: Direct Hire/PermHybrid work scheduleRequirements: Oracle Cloud Fusion, SQL/PLSQL, Python/PowerShell, LinuxPay: up to $150k (possible flex for right candidate)Work Authorization: Must be eligible to work in the US without sponsorship now or in the future.Summary: As a Data Engineer, you will manage platforms, applications, and data associated with the job function, performing data migrations, automating data enrichment tasks, and developing system integrations across marketing, finance, sales, and relationship management systems. You will be expected to have expertise in relational databases, data mining and transformation, integration patterns, systems administration, reporting, risk management, and application security. Your role involves collaborating with and coaching team members to create effective, scalable solutions, making strategic decisions, implementing best practices, and ensuring projects are completed on schedule.Responsibilities: Maintain Windows and Linux servers running integration platforms and assist with compliance procedures.Collaborate with solutions architects, project managers, business analysts, and developers to ensure proper strategy, design, and solutions are created.Create supporting documentation for system integration, administration, and compliance tasks.Assist with incident management and resolution for database and platform settings.Stay up to date with novel integration capabilities and patterns.Create maintainable, elegant code and high-quality data products that are well-documented and user-friendly.Build, maintain, and improve the infrastructure for extracting, transforming, and loading data from various sources using SQL and Oracle technologies.Design analytics tools to utilize the data pipeline to produce actionable insights.Analyze business needs to create scalable solutions.Identify methods to streamline processes and automate repetitive tasks.Work with partners from different functional departments and lead projects.Maintain security data across multiple data centers and regions.Requirements: Education:Bachelor's degree in computer science, engineering, information technology, or a related field, or comparable experience.Required Skills and Experience:5+ years of experience in creating distributed data pipelines for batch and real-time applications.4+ years of programming experience in R or Python.4+ years of experience with SQL; NoSQL experience is a plus.4+ years of experience in dimensional data modeling and schema design.Experience with Oracle Database and Oracle Fusion Cloud.Expertise in integration development using ETL tools (e.g., Talend, MuleSoft, Informatica, SSIS).Well-versed in a variety of transport and API protocols, including REST, GraphQL, and gRPC.Knowledge of JSON, XML, SQL, and SOAP/REST-based online services.Strong communication skills and ability to work in highly agile environments.Proficiency with API Authentication and Authorization (OAuth, OpenID, Bearer).Strong analytical and problem-solving skills.Ability to work autonomously with little oversight.Knowledge of integration development for sales and CRM technologies.Experience in developing, managing, and designing data processing systems, including MapReduce or MPP systems.Familiarity with constructing microservices using frameworks like Spring Boot.All qualified applicants will receive consideration for employment without regard to race, color, national origin, age, ancestry, religion, sex, sexual orientation, ge