Project Control Manager Salary in Birmingham, AL

As a Project Manager I you get to be responsible for achieving the project's objectives. You'll work closely with the Project Executive, Project Sponsor and Project Management Team to define the project objectives, create a plan and for and executing the plan to achieve those objectives. The Project Manager has a working knowledge of the technical and organizational environments in which the project deliverable's are created and in which they will be used. You may also assist in the strategic planning for the department. The Project Manager must be an excellent communicator at all levels within the project environment, be proactive, exhibit strong leadership qualities, and be able to adapt to a dynamic and potentially geographically disbursed project environment.PRIMARY DUTIES:For you to perform this job successfully, an individual must be able to perform each primary duty satisfactorily. Responsible for meeting the scope, schedule, resource and budget commitments reflected in the Project Management Plan. - Responsible for overall project (Gross Margin) profitability- Obtains, organizes, and maintains all project contract documents- Receive, organize, and review information from the salesperson or project development team- Prepares project billing revenue forecasts and schedule of values Lead the project management team in developing and managing the Project Management Plan within the constraints established and approved by the Project Sponsor. - Obtain, organize, and maintain all project contract documents in accordance with Schneider Electric quality policy- Coordinates project in accordance with contract documents and approved sales estimate- Schedule and conduct all project construction meetings- Material procurement- Review and approve design, commissioning, and installation plans Implement and enforce change control over project scope, schedule, resources, and budget. Collaborate with functional managers and/or organizational management to obtain adequate resources with appropriate skills to staff the project team. - Manages resources by planning, scheduling, and forecasting manpower and resource requirements- Interview, hire, train, mentor, evaluate, and when necessary, terminate project personnel or make related recommendation in accordance with company policies Manage the timely resolution of issues, including the escalation of issues that are outside of the project team's scope of responsibility. Continually identify and proactively manage project risks & issues, ensure execution of corrective action plans up to closure. - Reviews and approves material and subcontract invoices for payment- Prepares and delivers final project closure and documentation to customers and ensures final payment- Management of and responsibility for project change order log Monitor the project and report the project status to the management on a regular basis. - Prepare and update project schedule and cost re-estimates on a routine basis SCOPE: Medium projects, regional or global projects, high need for coordination, medium project team Additional duties may be assigned. Participate and contribute in subcontractor qualification Participate and contribute in subcontractor bid solicitation process Contribute in bid evaluation Participate and contribute in subcontract negotiations Contribute to oversight of all financial services associated with the construction contract. This to include but not be limited to: change order management, billings, forecasting, bonds, insurance, accounts Payable and receivable process and project re-estimates / cost revisions. Participate and contribute Backlog reviews Participate and contribute in management of the project estimate from midterm to project close out Qualifications - External We know skills and competencies show up in many different ways and can be based on your life experience. If you do not necessarily meet all the requirements that are listed, we still encourage you to apply for the position. This job might be for you if: 4 year college degree or technical degreeSix to Eight years related work experience.The candidate will demonstrate a thorough knowledge of contracting and construction in Mechanical and Electrical field.An understanding of ESCO, lower and higher Ed background, and experience leading/directing multiple projects will be a plus.Understanding of and proficient in project management skillWorking knowledge of ISO requirementsExcellent time management and organization skillsProficient in Microsoft Office programs, including thorough knowledge of MS ProjectFinancial acumen and understandingExcellent customer serviceLeadership skills: team building, empower and delegate authority, ability to build rapport and consensusThorough understanding of contract procedures and tacticsAdvanced knowledge of contract law, codes, standards, and industry construction knowledgeStrong written and verbal communication skills75% travel in the Southeast Monday - Thursday weekly.Schneider Electric offers a robust benefits package to support our employees such as flexible work arrangements, paid family leave,401(k)+ match, and more. Click here to find out more about working with us: http://se.com/us/careers.We seek out and reward people for being straightforward, open, passionate, effective and challenging the status quo. We want our employees to reflect the diversity of the communities in which we operate. We welcome people as they are, creating an inclusive culture where all forms of diversity are seen as a real value for the company. We're looking for people with a passion for success - on the job and beyond. See what our people have to say about working for Schneider Electric: https://youtu.be/6D2Av1uUrzY . Let us learn about you! Apply today. You must submit an online application to be considered for any position with us. This position will be posted until filled.It is the policy of Schneider Electric to provide equal employment and advancement opportunities in the areas of recruiting, hiring, training, transferring, and promoting all qualified individuals regardless of race, religion, color, gender, disability, national origin, ancestry, age, military status, sexual orientation, marital status, or any other legally protected characteristic or conduct.Concerning agencies: Schneider Electric does not accept unsolicited resumes and will not be responsible for fees related to such.Schneider Electric is an Affirmative Action and Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability.Why us?Schneider Electric is leading the digital transformation of energy management and automation. Our technologies enable the world to use energy in a safe, efficient and sustainable manner. We strive to promote a global economy that is both ecologically viable and highly productive.€25.7bn global revenue137 000+ employees in 100+ countries45% of revenue from IoT5% of revenue devoted for R&DYou must submit an online application to be considered for any position with us. This position will be posted until filledIt is the policy of Schneider Electric to provide equal employment and advancement opportunities in the areas of recruiting, hiring, training, transferring, and promoting all qualified individuals regardless of race, religion, color, gender, disability, national origin, ancestry, age, military status, sexual orientation, marital status, or any other legally protected characteristic or conduct. Concerning agencies: Schneider Electric does not accept unsolicited resumes and will not be responsible for fees related to such.As a Project Manager I you get to be responsible for achieving the project's objectives. You'll work closely with the Project Executive, Project Sponsor and Project Management Team to define the project objectives, create a plan and for and executing the plan to achieve those objectives. The Project Manager has a working knowledge of the technical and organizational environments in which the project deliverable's are created and in which they will be used. You may also assist in the strategic planning for the department. The Project Manager must be an excellent communicator at all levels within the project environment, be proactive, exhibit strong leadership qualities, and be able to adapt to a dynamic and potentially geographically disbursed project environment.PRIMARY DUTIES:For you to perform this job successfully, an individual must be able to perform each primary duty satisfactorily. Responsible for meeting the scope, schedule, resource and budget commitments reflected in the Project Management Plan. - Responsible for overall project (Gross Margin) profitability- Obtains, organizes, and maintains all project contract documents- Receive, organize, and review information from the salesperson or project development team- Prepares project billing revenue forecasts and schedule of values Lead the project management team in developing and managing the Project Management Plan within the constraints established and approved by the Project Sponsor. - Obtain, organize, and maintain all project contract documents in accordance with Schneider Electric quality policy- Coordinates project in accordance with contract documents and approved sales estimate- Schedule and conduct all project construction meetings- Material procurement- Review and approve design, commissioning, and installation plans Implement and enforce change control over project scope, schedule, resources, and budget. Collaborate with functional managers and/or organizational management to obtain adequate resources with appropriate skills to staff the project team. - Manages resources by planning, scheduling, and forecasting manpower and resource requirements- Interview, hire, train, mentor, evaluate, and when necessary, terminate project personnel or make related recommendation in accordance with company policies Manage the timely resolution of issues, including the escalation of issues that are outside of the project team's scope of responsibility. Continually identify and proactively manage project risks & issues, ensure execution of corrective action plans up to closure. - Reviews and approves material and subcontract invoices for payment- Prepares and delivers final project closure and documentation to customers and ensures final payment- Management of and responsibility for project change order log Monitor the project and report the project status to the management on a regular basis. - Prepare and update project schedule and cost re-estimates on a routine basis SCOPE: Medium projects, regional or global projects, high need for coordination, medium project team Additional duties may be assigned. Participate and contribute in subcontractor qualification Participate and contribute in subcontractor bid solicitation process Contribute in bid evaluation Participate and contribute in subcontract negotiations Contribute to oversight of all financial services associated with the construction contract. This to include but not be limited to: change order management, billings, forecasting, bonds, insurance, accounts Payable and receivable process and project re-estimates / cost revisions. Participate and contribute Backlog reviews Participate and contribute in management of the project estimate from midterm to project close out

Provide project management assistance through completion of projects on time and under budgetManage and develop assigned staff toward maximum job performance and career potentialHelp create, review, negotiate, and works with the project team to process the meeting minutes, Owner Change Orders, and requests for informationEstablish, communicate, and implement the Project ScheduleInterpret and analyze reports to ensure adherence to project budgetDevelop a thorough understanding of the details of the projectManage the Quality Assurance/Quality Control programProvide leadership in risk evaluation, contract negotiations, and fee and pricing decisionsMPI does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, disability, veteran status, marital status, or based on an individual's status in any group or class protected by applicable federal, state or local law. MPI encourages applications from minorities, women, the disabled, protected veterans and all other qualified applicants.At least 1 year of commercial construction experience, healthcare construction experience is preferredBachelor's Degree in Construction Management, Civil Engineering, Architecture or a related field recommendedTeam player with a positive and driven attitudeStrong written and oral communication skillsThe ability to work in a fast paced work environmentDesire to further career as a Project ManagerOSHA certificaton preferred

Design Manager, AssistantUS-AL-BirminghamJob ID: 2024-3262Type: Gray AE, PSC# of Openings: 1Category: ARCH-ArchitectureGray AE, PSCOverviewGray AE is looking for an Architecture Assistant Design Manager to join our team in Birmingham, AL.ResponsibilitiesWhy Gray? Gray is a family-owned, fully integrated global service provider specializing in engineering, design, construction, digital, equipment manufacturing, and real estate services. Deeply rooted in EAC services, Gray serves both domestic and international customers across our core markets: Food & Beverage, Manufacturing, Automotive, Distribution, Mission Critical, and Commercial. At Gray, our purpose is to make a positive difference in people's lives and build a better future.Gray AE, the design arm of Gray, is a top-ranked firm offering architecture and engineering services across the globe. Made up of multidisciplinary teams of architects, engineers, and project managers, these collaborative teams work every day to provide unique, customized solutions for our customers.It’s the spirit of our people – the passion, commitment, and a great team environment – that makes our company a great place to work. Who we want… (Requirements) Bachelor's degree from four-year college or university with three-five years relevant experience; or a degree from a technical college and five-ten years of relevant experience Must possess basic computer skills including the ability to utilize word processing, spreadsheet, AutoCad and e-mail applications. May require knowledge of applications specific to the project assigned. Must also possess excellent communication and interpersonal skills. The new team member should be an energetic, self-motivated individual who enjoys a team environment, as well as a passion for collaboration and professional development. If you are a high achiever striving to exceed expectations in a fast-paced innovative company, then Gray is the place for you. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.QualificationsWhat we expect… (Essential Functions)Review design proposal criteria and facilitate preparation of proposal documents for use by construction personnel, subcontractors, and vendors. Function as the design lead on smaller proposals, typically less than 10 million dollars.Provide research regarding the project design, along with applicable code and regulatory requirements.Consults with customer to determine functional and spatial requirements of new structure or renovation, and prepares information regarding design, specifications, materials, color, and equipment.Prepares the layout of project and integrates engineering elements into unified design for customer review and approval.Responsible for quality assurance and quality control of design documents for all design disciplines including but not limited to review of documents prepared by Architectural Technicians, sub-consultants and design-build subcontractors.Prepare and administer design contracts with the customer and/or sub-consultants.Facilitate design reviews and presentation of current design documents for customer review and approval.Coordinate design activities with customers and Gray sub-consultants.Facilitate the preparation of schematic, design development, and construction documents and manage construction administration activities for the project.Develop a design schedule and estimate of A/E costs for projects.Substantially impacts the project by approving invoices, creating pay aps, negotiating with outside resources, creating the schedule, and managing the construction documents.Responsible for code reviews on behalf of management, in conjunction with the AOR.Work with EPA, CORE, and Authority of Jurisdiction to manage issues, in conjunction with the Design Management team.Must plan long and short-term goals as it relates to the design of the project.Monitor project design activities to assure compliance with Gray standards and procedures.Manage all administrative tasks related to design for the project.Manage all costs related to design activities to ensure accurate budget control. Has budgetary authority to spend money, as is seen fit.Will be responsible for the day-to-day management of one – three technicians and will perform some technical production.Other duties may be assigned. Physical Demands & Work EnvironmentThe physical demands described here are representative of those that must be met by a team member to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the team member is frequently required to stand, walk, sit, use hands and arms, reach, and talk or hear. They are regularly required to climb or balance, stoop, kneel, or crouch. Must frequently lift and/or move up to 25 lbs, and occasionally lift or move up to 100 lbs. Specific vision abilities include accurate near and distant vision. Frequently in a normal office environment where noise level is moderate and temperature/humidity is controlled. Occasionally exposed to wet and/or humid conditions, moving mechanical parts, and outside weather conditions. May be exposed to high, precarious places, fumes or airborne particles, extreme cold and/or heat, risk of electrical shock, explosives and vibrations. Noise level on the job site is normally moderate to loud. Overtime may be required. Supervisory ResponsibilitiesMay supervise 1 - 3 team members such as Architectural Technicians. Carries out supervisory responsibilities in accordance with the organization's policies and applicable laws. EEO DisclaimerGray is proud to be an Equal Opportunity Employer and welcomes everyone to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability. #LI-TK1 PI239476863

Design Manager, SeniorUS-AL-BirminghamJob ID: 2024-3263Type: Gray AE, PSC# of Openings: 1Category: ARCH-ArchitectureGray AE, PSCOverviewGray AE is looking for an Architecture Sr. Design Manager to join our team in Birmingham, AL.ResponsibilitiesWhy Gray AE? Gray is a family-owned, fully integrated global service provider specializing in engineering, design, construction, digital, equipment manufacturing, and real estate services. Deeply rooted in EAC services, Gray serves both domestic and international customers across our core markets: Food & Beverage, Manufacturing, Automotive, Distribution, Mission Critical, and Commercial. At Gray, our purpose is to make a positive difference in people's lives and build a better future.Gray AE, the design arm of Gray, is a top-ranked firm offering architecture and engineering services across the globe. Made up of multidisciplinary teams of architects, engineers, and project managers, these collaborative teams work every day to provide unique, customized solutions for our customers.It’s the spirit of our people – the passion, commitment, and a great team environment – that makes our company a great place to work. Who we want… (Requirements)Bachelor's degree from four-year college or university; degree from a technical college; or minimum of seven years related experience and/or training; or equivalent combination of education and experience. Must possess basic computer skills including the ability to utilize word processing, spreadsheet, e-mail and AutoCad applications. May require knowledge of applications specific to the project assigned. Must also possess excellent communication and interpersonal skills. The new team member should be an energetic, self-motivated individual who enjoys a team environment, as well as a passion for collaboration and professional development. If you are a high achiever striving to exceed expectations in a fast-paced innovative company, then Gray AE is the place for you.The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.QualificationsWhat we expect… (Essential Functions) Review design proposal criteria and facilitate preparation of proposal documents for use by construction personnel, subcontractors, and vendors.Provide research regarding the project design, along with applicable code and regulatory requirements.Consults with customer to determine functional and spatial requirements of new structure or renovation, and prepares information regarding design, specifications, materials, color, and equipment.Prepares the layout of project and integrates engineering elements into unified design for customer review and approval.Responsible for quality assurance and quality control of design documents for all design disciplines including but not limited to review of documents prepared by Architectural Technicians, sub-consultants and design-build subcontractors.Prepare and administer design contracts with the customer and/or sub-consultants.Facilitate design reviews and presentation of current design documents for customer review and approval.Coordinates design activities with customers and Gray AE sub-consultants.Facilitate the preparation of schematic, design development, and construction documents and manages construction administration activities for the project.Develop a design schedule and estimate of A/E costs for projects.Monitor project design activities to assure compliance with Gray AE standards and procedures.Manage all administrative tasks related to design for the project.Manage all costs related to design activities to ensure accurate cost control.Other duties may be assigned.Physical Demands & Work Environment The physical demands described here are representative of those that must be met by a team member to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the team member is frequently required to stand, walk, sit, use hands and arms, reach, and talk or hear. They are regularly required to climb or balance, stoop, kneel , or crouch. Must frequently lift and/or move up to 25 lbs, and occasionally lift or move up to 100 lbs. Specific vision abilities include accurate near and distant vision. Frequently in a normal office environment where noise level is moderate and temperature/humidity is controlled. Occasionally exposed to wet and/or humid conditions, moving mechanical parts, and outside weather conditions. May be exposed to high, precarious places, fumes or airborne particles, extreme cold and/or heat, risk of electrical shock, explosives and vibrations. Noise level on the job site is normally moderate to loud. Overtime will be required. Some travel will be required. Supervisory Responsibilities May supervise 1 to 3 team members such as Architectural Technicians and Assistant Design Managers. Carries out supervisory responsibilities in accordance with the organization's policies and applicable laws. Responsibilities include training team members, planning, assigning, and directing work; provides input for appraising performance; rewarding and disciplining team members; addressing complaints and resolving problems. EEO DisclaimerGray is proud to be an Equal Opportunity Employer and welcomes everyone to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability. #LI-TK1 PI239476697

Project Manager - Data Centers Career Area: Engineering - Civil What We're Looking For: Barge Design Solutions is currently seeking a Project Manager focused on civil site design projects within our Mission Critical / Data Center Program Team. Position will be located in any of the Barge offices or working remotely.Responsibilities:Works with Mission Critical Program leadership to implement proper PM procedures for this programmatic data center work.Collaborates with stakeholders on proposals to determine time, cost, & processes for accomplishing projects deliverables.Collaborates with stakeholders to establish Project Management Plans and assemble teams.Executes activities to ensure that goals or objectives of projects are accomplished within defined time and established budget in a technically sound manner.Provides technical leadership on civil-site data center projects including preparation of grading, drainage, site layout, utility, erosion control plans, permit documents.Develops contracts including subcontracts to comply with Barge terms. Ensures Quality Program implementation and execution. Reviews project reports and findings. On occasion visit job site for construction observation dutiesSupports team in managing construction administration activities to include including responses for Requests for Information, Submittals, Pricing Requests, Construction Change Directives, Consultant Supplemental Instructions, Addendums, Bulletins, etc.Mentors others and builds employee capabilitiesDevelops and maintains positive relationships with clients, customers, officials, contractors, and others. Sets and example of our core values in daily actions and promotes a positive workplace culturePerforms other duties as requested Education & Experience Qualifications: Bachelor's degree in Civil Engineering from an accredited programMinimum of 10 years' experience with civil site/land development/project managementPE registration Strong design and technical credibilityExcellent oral, written and graphical communication skillsAbility to effectively manage concurrent projects and deadlinesStrong teambuilding and collaboration skills Why join us? Barge Design Solutions, Inc., is an engineering and architecture firm with diverse in-house multidisciplinary practice areas. The employee-owned company is more than 400-people strong and serves clients nationwide from multiple U.S. locations. Barge is ranked No. 171 on Engineering News-Record (ENR)'s 2021 Top 500 Design Firms list, is No. 177 on Architectural Record's Top 300 Architecture Firms and is a certified Great Place To Work. Our primary purpose for being in business is ultimately to create a better life by unleashing the potential of our people, clients and communities. This purpose is supported by our company's core values because at the end of the day, Barge CARES: Collaborate - Help and expect help. Teamwork is essential in what we do. Authentic - Honesty, integrity and trust are at the heart of everything we do. We are who we say we are. Responsible - We are accountable for our work, our attitude, and our actions. We make Barge better. Excellence - We go all in and expect more of ourselves than others expect of us. Service - We are humble. We use our gifts in service of others. We believe that if we are living out our purpose for being in business and integrating our values into everything we do, we will ultimately achieve our vision to be the firm best known for being selected when it matters most. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status or on the basis of disability. Equal Opportunity Employer/Veterans/Disabled

The Commercial Construction Project Manager will:Provide overall leadership to entire project teamManage and develop assigned staff toward maximum job performance and career potential.Build and maintain rapport with architects, subcontractors, and vendors.Understand and administer contract and subcontract agreements.Establish, communicate, and implement the Project ScheduleManage budget and financial reportingInterpret and analyze reports to ensure adherence to project budget.Manage the Quality Assurance/Quality Control program.Provide leadership in risk evaluation, contract negotiations, and fee and pricing decisionsMPI does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, disability, veteran status, marital status, or based on an individual's status in any group or class protected by applicable federal, state or local law. MPI encourages applications from minorities, women, the disabled, protected veterans and all other qualified applicants.The successful Commercial Construction Project Manager will have the following:5+ years' experience in Commercial Construction Project ManagementBachelor's Degree in Construction Management or related field strongly preferredOSHA certification preferredProficient in project management softwareEffective communication skills, both written and verbal

TAI has consistently been recognized by professional publications such as ENR and BBJ as a Top National Design Firm in the US, Top Company, and Fastest Growing Company. We have partnered with a leading biotech company to identify a Project Manager to lead CapEx projects onsite.In this position, you will be responsible for project ideation, scoping, planning, and execution within the company's governance systems. This role will require a highly competent individual that can function in a highly visible role to deliver results to major capital project challenges.Qualifications/Responsibilities:Identify and capture new project opportunities.Develop project execution plans, manage issues and risks, drive issue resolution, and direct resources to deliver successful projects.Ensure adequate tracking and reporting controls are established to evaluate the project's progress and schedule performance.Track and communicate project status, risks, and key milestones to internal project stakeholders, and adjust project plans, budget request and/or resources as required to meet project requirements.Create detailed work breakdown structures for successful implementation strategies.Drive teams of responsible engineers, contractors, and other, less senior project professionals to achieve targets.Ensure accuracy of design information according to user requirement specifications and help define site standards for design basis.Required to be aware of current best practice in particular the utilization of costs / energy efficient materials.Collaborates with end users, stakeholders, and other department heads and key decision makers to ensure compliance to project scope and management of expectations.Provide clarity to project objectives, foster team development to meet expectations.Identify and source resources as required to satisfy execution needs.Experience of planning and managing resources to deliver pre-determined objectives as specified by more senior management.Participate in Safety, Health, and Environmental reviews, permit audits, and construction housekeeping inspections.Ensure that process hazard analysis open/action items are adequately addressed in engineering deliverables prior to full project funding and delivery.Applies comprehensive knowledge to act independently while providing guidance and training to others on using clear and effective verbal communication skills to express ideas, request actions, and formulate plans or policies.Works independently and provides guidance and training to others on analyzing data trends for use in reports to help guide decision-making.Participate in hazard and operability studies during detailed design.Contribute to RCA investigations for Contractor-related injuries during the construction execution phase of the project.Ensure permit to work, toolbox talks, and other contractor orientation programs or practices are followed daily and contractors control risk in execution.Requirements:BS in relevant engineering disciplineHas 10+ years of experience in a leadership role managing teams in a regulated industry, preferably pharmaceutical or medical device.Demonstrated track record of leading sustainable cultural and operational change and driving transformation.Possesses knowledge and understanding of Current Good Manufacturing Practices (cGMP) and how they apply to manufacturing operations.Strong Safety, Health, Environmental (SHE), and Quality systems appreciation with the ability to lead a zero-harm safety culture.*This is a full-time, direct-hire role with the following perks...health benefits, bonus, 401k matching, FSA, life insurance, generous PTO, and tuition reimbursement!*If you're interested in learning more about TAI Engineering and what made us a top-20 partner to the manufacturing sector per Engineering News Record (ENR), please visit us at www.taiengineering.com.

About Us:Clayco is a full-service, turnkey real estate development, master planning, architecture, engineering and construction firm that safely delivers clients across North America the highest quality solutions on time, on budget, and above and beyond expectations. With $5.8 billion in revenue for 2023, Clayco specializes in the "art and science of building," providing fast track, efficient solutions for industrial, commercial, institutional and residential related building projects.Why Clayco?Best Places to Work - St. Louis Business Journal, Los Angeles Business Journal, Phoenix Business Journal ENR - Top Midwest Contractors (#1), Top Design Build Contractors (#4), Top 400 Contractors (#20), ENR - Top Green Builders (#5)The Role We Want You ForThe Senior Preconstruction Manager-Process will overseeing and supporting management with customer focused coordination and preparation of projects within the Preconstruction Department. The Director of Preconstruction will lead participation in competitive bid efforts for both CM and Design Build project delivery formats including estimates beginning at the earliest stages of conceptual design through completed construction documents. Must lead project teams composed of both Clayco personnel and external partners by providing design management, value-based project scoping, risk assessment, and competitive reliable pricing.Specific Responsibilities:Responsible for bidding work accurately, competitively, and on time.Review of all RFP or design documents to establish a complete understanding of requested scope of work. Develop RFI lists for project clarifications. Emphasis of work will include more complicated, larger projects.Coordination with project team to provide take off and estimating, constructability analyses, value engineering, cost control, scope reviews etc.Ability to estimate and "fill in the gaps" for complete pricing when only conceptual design documents are available.Take off all materials and prices, identify subcontractor involvement, solicit subcontractor and/or manufacturer prices and estimate direct field labor.Assist internal team members who are responsible for building positive working relationships with local and national material suppliers and equipment vendors to provide current pricing of lighting, distribution equipment, low voltage systems, and miscellaneous material pricing.Assist internal team members in maintaining positive working relationships with local and national Electrical /Technology/LV System subcontractors to verify market conditions and labor issues.Assist internal team members responsible in maintaining current subcontractor and material costs within our estimating software.Contribute in creating data to be used for conceptual estimating measures, such as, man-hours and/or cost per lineal foot, per square foot, by system, by spec, by building type, etc.RequiredBachelor's Degree in Construction Management, Engineering, Architecture or related10+ years of estimating construction projects ($50+ million)Capability to lead project pursuits in multiple market sectors including Commercial, Industrial, Healthcare, Institutional, and ResidentialDemonstrated knowledge of building construction, materials, systems, market conditions, and trade practicesKnowledge of estimating and quantity takeoff softwareExperience leading Preconstruction meetingsPrevious supervisory experience managing and mentoring junior staffProficiency with Microsoft Office applications. Experience with Trimble on-screen takeoff software is preferred.Ability to review bid documents and offer design critique and/or VE opportunitiesMust work well under pressure and deadlines.Must have demonstrated success in leadership, safety awareness, good follow-up skills, coaching, and teamworkEffective written/oral communication skills, and interpersonal skillsSome things you should knowOur clients and projects are nationwide. The broader your knowledge of materials and labor costs, the better.No other builder can offer the collaborative design-build approach that Clayco doesThe right person for this role is a problem solver who can visualize and conceptualize to find best solutions for clients.We work on creative, complex, award-winning, high profile jobsThe pace is fast

About Us:Clayco is a full-service, turnkey real estate development, master planning, architecture, engineering and construction firm that safely delivers clients across North America the highest quality solutions on time, on budget, and above and beyond expectations. With $5.8 billion in revenue for 2023, Clayco specializes in the "art and science of building," providing fast track, efficient solutions for industrial, commercial, institutional and residential related building projects.Why Clayco?Best Places to Work - St. Louis Business Journal, Los Angeles Business Journal, Phoenix Business Journal ENR - Top Midwest Contractors (#1), Top Design Build Contractors (#4), Top 400 Contractors (#20), ENR - Top Green Builders (#5)The Role We Want You ForThe Senior Mechanical Preconstruction Manager will aspects of the preconstruction process for mechanical systems to develop accurate, detailed cost estimates, often based on conceptual or schematic designs with a focus on heavy/ advanced manufacturing, industrial and mission critical projects. This role is expected to interact with engineers, architects, consultants, owner's representatives, subcontractors, suppliers, a multi-discipline estimating team, senior management, project supervision, and field personnel.ResponsibilitiesResponsible for the collection and distribution of bid documentation relative to RFPs, and solicitation for bid requests using online platform (AutoDesk Building Connected)Assist in gathering information to complete Bid Qualification and Criteria requirementsAttend pre-bid meetings to become familiar with unique project requirements and analyze existing site conditions to determine required scope that is not already indicatedReview and interpret project documents to determine job-specific material, equipment, and labor requirements for scope developmentPrepare written scopes of work for subcontracts and suppliers and coordinate mechanical scopes with the work of other trades (e.g., civil, structural, architectural, electrical, etc.)Participate in pre-proposal design coordination meetings to support the development of pricing documents for conceptual estimatesPerform constructability analysis of project documents. Communicate design and constructability issues to the project team, while identifying risk elements and appropriate mitigation measuresProvide viable design alternatives and value engineering propositions with analysis supporting benefits to initial and life cycle cost, schedule, maintenance, etc.Perform quantity survey of mechanical systems and components using digitized software, and apply industry standard labor rates (e.g., MCAA, PHCC, etc.) to develop accurate cost estimatesEvaluate vendor and subcontractor for conformance with proposal requirements; level scopes and identify low cost/ best value responses while capturing assumptions, rationale, inclusions, exclusions, etc.Prepare estimates used for bidding and budgeting purposes (including self-performed work); participate in internal estimate review process and assist with final recap of estimate for presentation to senior managementSupport project management tasks, including budgeting, schedule development, interim design review, change order pricing, procurement, value engineering, and vendor selection based on proposal developmentCoordinate with project teams to evaluate productivity for historical data and schedule/ cost forecasting purposesMaintain and improve supplier and subcontractor database utilizing the company's prequalification programSupervise junior estimators, estimating assistants and/or Interns; providing training and support in a mentoring capacity and review work products for quality controlAssist in the organization and maintenance of estimating software material cost databases to ensure accurate costs are consistently utilized on bids; communicate data on construction and material cost trends affecting project costs to project teamsIdentify opportunities for improvement in departmental processes, approach, and execution of estimating and preconstruction functions; assist in creating or adopting new tools to maximize productivity with the lowest attendant value of acceptable riskRequirementsBachelor's degree in Mechanical Engineering, Construction Management, or related field, or a combination of education (including trade schools) and professional experience.10+ years experience in preconstruction/ estimating with a focus on mechanical systems (i.e., Fire Protection, HVAC, Plumbing, Piping)Exhibits inclusive leadership and teamwork behavior, and values diverse perspectives from team membersDemonstrated experience in the successful management of bidding process for conceptual estimates with a preferred emphasis on heavy/ advanced manufacturing, industrial and mission critical marketsWorking knowledge of codes and standards applicable to the design and installation of mechanical systemsWorking knowledge of construction contract language and terms in addition to various contractual delivery methods (e.g., negotiated, hard bid, design assist, GMP, etc.)Possesses strong technical writing, math and computer skills with proficiency using standard office software applications such as BlueBeam, Microsoft Excel, Word and PowerPoint to support estimating effortsProficiency using estimating software with a preference for Trimble productsSome Things You Should KnowNo other builder can offer the collaborative design-build approach that Clayco doesWe work on creative, complex, award-winning, high profile jobsThe pace is fastNationwide projects - Data Centers, High Rises, Higher Ed, Industrial, and more!

Our mission at Books-A-Million is to take care of our associates, customers, and stakeholders. Our standards are to provide a warm, genuine, and friendly experience, making our customers' needs our first priority. We develop and empower our associates to represent our organization passionately and positively through mutual respect; and we create and maintain an energetic environment that fosters loyalty to our brand. Join the BAM FAM and create a great career.The Position...Books-A-Million Inc is looking for an up-and-coming audit professional to take charge of our Internal Audit Department. The ideal candidate would be either a current senior auditor working in public accounting, or a strong internal audit senior/manager with an array of accounting and financial experience, preferably in the retail and/or commercial real estate industry. The main priorities of this position consist of evaluating the company's compliance with internal controls and developing lean initiatives that focus on improving business operations and processes. This position offers the opportunity for rapid advancement to senior level management in the various operating and staff departments of the company. *This position is IN-OFFICE at the Birmingham, AL corporate office. What We Need From You...Ability to lead all audit activities for the Company (i.e. operational, internal controls, and external audit relationships)Present findings to Executive Management and Audit Committee at least quarterly in an effective mannerAbility to analyze inventory observationsDeep understanding of major business processesStrong technical internal audit skills, including IT audit skillsStrong project management skillsAbility to interact comfortably with Senior/Executive level management and Board MembersAbility to build strong relationships with leaders of BAM's business operationsAbility to quickly assimilate relevant information in unfamiliar situationsSuperior analytical and critical thinking skillsExcellent listening, verbal, written and presentation communication skillsStrong influencing and negotiation skillsPassion to help improve business and process operationsSound judgment and ability to act independentlyQualifications And Education RequirementsBA/BS in Accounting or similar business area required. MBA/MACC preferred3-4 years of public accounting audit experience or 4-6 years of strong external audit experience (preferably within retail/service industries)Presentation and liaison experience with businesses and executivesAdvanced Excel data and reporting knowledgeApplying materiality threshold standardsCPA, CIA, is highly preferred, but not requiredTravel Requirements: Ability to travel up to 25%, domestically, as needed. Physical And Environmental RequirementsMust be able to sit at a computer or desk for extended periods of time. Must be able to use hands/arms to operate a keyboard, telephone and for repetitive motion activities. Must be able to lift objects up to 25 lbs. with or without assistance. Must be able to communicate using speech, sight, and sound with or without an assistive device. Must be able to stand, walk, stoop or crouch while performing daily activities of the job. Must be able to withstand changing weather conditions at stores and warehouse.