Mechanical Engineer Salary in Albuquerque, NM

TransCore-Amtech Systems (AMS), a subsidiary of ST Engineering, is seeking a full-time QA Engineer II to join our team in Albuquerque, New Mexico Job Summary: Creates, evaluates, and executes quality assurance processes, procedures and statistical techniques. Job Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Essential Duties and Responsibilities include the following. Other duties may be assigned. Participate in implementing and monitoring processes for an ISO 9001:2015 certified quality system May be asked to be the Subject Matter Expert for certain quality processes Perform internal auditing of quality system processes Coordinate completion of corrective and preventive actions Perform supplier site audits for supplier qualifications and nonconformances Perform root cause analysis for process and product nonconformances Perform failure analysis and reporting for RFID products May be responsible for coordinating IPC solder certification training Support ESD Control program Conduct data analysis for product and process performance using statistical techniques Participate on engineering design teams to provide inputs regarding quality for new product development Required Skills and Experience: Typically requires a minimum of 4 years of related experience. Project Management Detail-oriented Analytical Skills Multitasking & Adaptability Customer Service & Communication Skills MS Office & Database Software Technical Reports Troubleshooting Desired Skills: Time Management Skills & Organizational Skills Problem Solving Skills Organizational Skills Training/Presentation Skills Interpreting Financial Reports Preferred Certificates, Licenses, Registrations: American Society of Quality - Certified Quality Engineer, Manager, or Auditor IPC Solder Standards: IPC-A-610, IPC J-STD-001, IPC 7711/7721 ANSI/ESD S.20.20 Electro-Static Control Program Education: Bachelor's degree (B.A.) in Engineering field of Mechanical, Electrical, or Quality Assurance Engineering from four-year college or university.

Job DescriptionWith the continuously expanding heterogeneous integration landscape to enable 2.5D/3D connectivity solutions, the Embedded Silicon Bridge Process Development team is excited to announce we are seeking a new Process Integration Yield/Device Development Engineer.As a Process Integration Yield/Device Development Engineer you will be responsible for but not limited to:Design and execution of experiments for next-generation Embedded Multi-die Interconnect Bridge (EMIB) products.Defining and establishing process recipes, flows, characterization windows, and specifications for new products.Partnering with Technology Development (TD) process engineering module teams to select required equipment to develop new devices or products.Collaborating with upstream and downstream customers to meet product requests, develop design rules, and manage interactions while ensuring manufacturability and reliability goals can be met.Planning and conducting experiments and data analysis to optimize and characterize new processes and understand sources of variation within the fab to improve process stability/capability.Developing solutions to problems utilizing formal education, statistical knowledge, experiment design, industry literature, and problem-solving tools.Developing strategies to resolve difficult problems and establishing systems to deal with these problems in the future.The ideal candidate should exhibit the following behavioral traits:Excellent communication skills and demonstrated willingness to work across organizational boundaries to meet objectives and key results while fostering a challenging and positive work environment.Demonstrated track record of leading process integration and module engineering co-development.High tolerance of ambiguity demonstrated flexibility and adaptability in a fast-changing environment.Established track record of problem-solving with creativity and out-of-box thinking as well as future, strategic, and possibility thinking.This position requires to be onsite in Rio Rancho, NM. You must work a minimum of six months onsite before working hybrid.Relocation assistance provided.QualificationsYou must possess the below minimum qualifications to be initially considered for this position. Preferred qualifications are in addition to the minimum requirements and are considered a plus factor in identifying top candidates.Minimum Qualifications:The candidate must possess a Bachelor's degree in Engineering, Computer Science, or Device Physics (a higher technical degree strongly preferred) and have demonstrated increasing levels of technical leadership responsibilities in technology development as well as 5+ years of semiconductor process development and manufacturing experience.3+ years of strong technical depth and demonstrated fab interconnect / middle of line / back end of line (BEOL) integration development expertise.5+ years leading technical teams and task forces, driving them to successful completion and mentoring others in resolving technical issues.Preferred Qualifications:Master's or Ph.D. degree in Engineering, Computer Science, or Device Physics.Embedded Silicon Bridge process integration experience.Demonstrated track record of process development and transfer/startup.Inside this Business GroupAs the world's largest chip manufacturer, Intel strives to make every facet of semiconductor manufacturing state-of-the-art -- from semiconductor process development and manufacturing, through yield improvement to packaging, final test and optimization, and world class Supply Chain and facilities support. Employees in the Technology Development and Manufacturing Group are part of a worldwide network of design, development, manufacturing, and assembly/test facilities, all focused on utilizing the power of Moore's Law to bring smart, connected devices to every person on Earth.Posting StatementAll qualified applicants will receive consideration for employment without regard to race, color, religion, religious creed, sex, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, military and veteran status, marital status, pregnancy, gender, gender expression, gender identity, sexual orientation, or any other characteristic protected by local law, regulation, or ordinance.BenefitsWe offer a total compensation package that ranks among the best in the industry. It consists of competitive pay, stock, bonuses, as well as, benefit programs which include health, retirement, and vacation. Find more information about all of our Amazing Benefits here.Working ModelThis role will be eligible for our hybrid work model which allows employees to split their time between working on-site at their assigned Intel site and off-site. In certain circumstances the work model may change to accommodate business needs.

ABOUT ROCKET LAB Rocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. Join our pioneering team and launch your career to new heights!SPACE SYSTEMS Rocket Lab's Space Systems team is responsible for every satellite and satellite component made by Rocket Lab: from complete satellites destined for missions to the Moon and Mars, to the individual components and subsystems that make up a satellite like solar panels, flight software, reaction wheels and star trackers, separation systems, radios, and more. Our Space Systems team is made up of engineers, technicians, and designers who design, create, and put together our own satellites for missions across the commercial, government, and defense sectors, or who build and assemble satellite hardware and software that supports other satellite missions. PRODUCTION ENGINEER II As a Production Engineer based at Rocket Lab's site in Albuquerque, New Mexico, you will be responsible for process improvements, yield and day to day sustaining work in the solar cell and silicon-based production processes. In this role you will take ownership of metal and dielectric e-beam deposition systems and the associated metrology, and work with production engineering team to sustain and improve production. To be successful in this role, you must be data driven, able to build solid relationships with operators on the production floor and R&D engineers and possess a high degree of ownership. Join a driven team of pioneers relentlessly tackling challenging projects, delivering on the impossible, and making an impact on the future of space! WHAT YOU'LL GET TO DO: Supporting sustaining activities to maximize yield and productivity of fab operation. Working with operations to maximize project completion. Own process modules by responding to defect issues, writing clear work instructions, training, yield reporting. Plan and perform experiments to improve safety/throughput/yield/reliability and assist R&D when new products or experiments are needed. YOU'LL BRING THESE QUALIFICATIONS: Bachelor's degree in an engineering field 2+ years of related industrial/manufacturing experience. Semiconductor-related experience may be considered. THESE QUALIFICATIONS WOULD BE NICE TO HAVE: E-beam deposition experience Solid understanding of statistical methods and working knowledge of JMP Lithography, wet and dry etch, III-V, or singulation. Hands-on experience with thin film metrology tools Understanding of solar cell device physics and testing methods ADDITIONAL REQUIREMENTS: Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus. Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing. Must be physically able to commute to buildings Occasional exposure to dust, fumes and moderate levels of noise. WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Biow at [email protected] dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Discover your full potential. At Tetra Tech, we are collaborating with industry-leading experts for a sustainable future for our world. We combine consulting and engineering with advanced analytics and technology to solve the world's most complex challenges. Our innovation hubs across the globe will enable you to share ideas and best practices while growing your professional network. Wherever you are in your career journey, you will benefit from working with world-class engineers, scientists, and technical specialists.Apply today and join the company that is Leading with Science.We are seeking a full-time, mid-level Project Engineer for our Albuquerque, NM operations. This position can be remote if you are within 100 miles of Albuquerque, NM; Phoenix, AZ, or Flagstaff, AZ.Response, assessment and evaluation services (RAES) are parts of a larger program associated with abandoned mines. The selected candidate will support our work at a variety of environmental engineering programs in the following areas:• Be part of a team of engineers and scientists developing designs required to implement removal and remedial actions for cleanup of environmentally impacted sites and abandoned uranium mines.• Work with a team to perform engineering design, develop plans, specifications, and cost estimating.• Support constructability evaluation with construction contractors• Support engineering alternative evaluations for removal and remedial actions at abandoned uranium mines.• Support pilot studies of new technologies and approaches for mine clean up.• Provide construction oversight of design implementation by construction contractors.• Be familiar with heavy equipment, construction means and methods, and surveying.• Communicate with client and contractors in the field during construction; serve as liaison between field and senior engineers in office.Qualifications:The ideal candidate will have a minimum of 7 years relevant experience. You will also have / be:• Familiarity with design/construction of disposal cells, waste piles, evaporative covers/caps, erosion and water controls, stormwater routing and controls, road design, slope stabilization, and restoration techniques.• Experience with engineering design and construction oversight. • Experience with environmental investigations.• Familiarity with AutoCAD Civil 3D.• Familiarity with heavy equipment, earthwork construction, and land surveying.• Experience in southwestern United States, environmental remediation, mining and mine reclamation, uranium mining and mills, interaction with regulatory agencies, tribal lands, CERCLA sites.• Excellent communication skills.Degree / Certifications• BS in engineering (civil, environmental, geotechnical) from an accredited college or university. • Professional Engineer (PE) is desirable; an EIT candidate with progress working under a PE is acceptable. • 40-hour OSHA HAZWOPER training is a plus• 30-hour OSHA construction safety training is a plus.Work EnvironmentThis position can be remote if you are within 100 miles of Albuquerque, NM; Phoenix, AZ, or Flagstaff, AZ. This position is primarily desk work, however, occasionally (30%) you will need to travel and perform fieldwork. The field work is anticipated to be in Arizona and New Mexico. A physical capacity for working outdoors, often in isolated areas, is required. You must be able to:• Drive on a regular basis. Passing a motor vehicle record background check and maintaining a valid driver's license and good driving record is required.• Work outdoors in all weather conditions, both hot and cold. • Walk on uneven terrain. • Work in variable outdoor environments, packing heavy equipment, and excavations using hand tools. • Carry field equipment (35 to 40 pounds).• Don personal protective gear as needed.Tetra Tech offers comprehensive benefit options that allow employees to design a plan based on individual needs and assists in planning for long-term financial security. Available benefits include medical, dental and vision insurance, term life, disability, accidental death & dismemberment coverage, Flexible Spending Account (FSA), Health Spending Account (HSA), time off with pay, 401k retirement plan, and an Employee Stock Purchase Plan.Health and safety play a vital role in our success. Tetra Tech's employees work together to comply with all applicable health & safety practices and protocols, including any public health orders and regulations that are mandated by local, state, provincial, federal, and international authorities as well as client and project requirements.About Tetra Tech:Tetra Tech combines the resources of a global, multibillion-dollar company with local, client-focused delivery in more than 550 locations around the world. Our reputation rests on the technical expertise and dedication of our employees27,000 associates working together to provide smart, scalable solutions for challenging projects. We are proud to be home to leading technical experts in water, environment, infrastructure, resource management, energy, and international development.Explore our open positions at https://www.tetratech.com/careers. Follow us on social media to learn more about our people, culture, and opportunities:LinkedIn: @TetraTechCareersTwitter: @TetraTechJobsFacebook: @TetraTechCareersTetra Tech is proud to be an Equal Opportunity Employer. Diversity, inclusion, and equity are among Tetra Tech's core values. Throughout our history, the company has prioritized equitable inclusion of all people. All qualified candidates will be considered without regard to race, color, religion, national origin, military or veteran status, gender, age, disabilities, sexual orientation, gender identity, pregnancy and pregnancy-related conditions, genetic information and any other characteristics protected by the law. We invite resumes from all interested parties. Please visit our website at www.tetratech.com to see the array of diverse services and exciting projects we are currently working on.Tetra Tech is a VEVRAA federal contractor and we request priority referral of veterans for available positions.We thank all applicants for their interest, however, only those candidates selected for interviews will be contacted.Please no phone calls or agencies.Additional Information Organization: 103 EMI

ABOUT ROCKET LAB Rocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. Join our pioneering team and launch your career to new heights!SPACE SYSTEMS Rocket Lab's Space Systems team is responsible for every satellite and satellite component made by Rocket Lab: from complete satellites destined for missions to the Moon and Mars, to the individual components and subsystems that make up a satellite like solar panels, flight software, reaction wheels and star trackers, separation systems, radios, and more. Our Space Systems team is made up of engineers, technicians, and designers who design, create, and put together our own satellites for missions across the commercial, government, and defense sectors, or who build and assemble satellite hardware and software that supports other satellite missions. SENIOR R&D ENGINEER Based out of Rocket Lab's site in Albuquerque, NM, theSenior R&D Engineerwill be a part of an integrated products R&D group that is responsible for the development of new solar panel products and new process development. You will support the R&D group by solving multi-disciplinary design problems related to new missions, new materials, and new product development. WHAT YOU'LL GET TO DO: Design, build, and test functional space hardware that powers a wide range of missions and impacts nearly every person on the planet. Make hands-on contributions to real hardware that operates in space. Develop space solar power technology that is among the highest efficiency and lightest ever made. Advance the state of the art in space solar technology. Participate in and lead hardware design projects from concept to production. Develop, qualify and implement new assembly processes including new equipment and advanced automation. Work with and lead multidisciplinary project teams. Participate in strategic product road-mapping. Become a subject matter expert in various areas of expertise. Use organizational skills for leading project teams, managing multiple concurrent projects, and planning, prioritizing and documenting work. Develop a strong theoretical understanding of the science and engineering principles that underpin space solar panels and assembly equipment, and use that knowledge to train others, recommend improvements, and conduct meaningful experiments. Solve multi-disciplinary electrical, thermal, mechanical, and materials problems for space solar panel products that have to survive in multi-effects environments. Use failure analysis methods such as five why, fishbone diagrams, root cause analysis, and FMEA to identify potential causes of failures and develop solutions. Document and communicate work product using written and spoken reports and presentations. YOU'LL BRING THESE QUALIFICATIONS Bachelor's degree in mechanical or aerospace engineering 5+ years of experience in mechanical design Experience in new product or new hardware development THESE QUALIFICATIONS WOULD BE NICE TO HAVE: Master's or PhD in a relevant subject matter Experience with space solar panels and systems Experience designing mechanical systems for use in the space environment. Proficiency using SolidWorks for design concepting and basic analysis. Proficiency in geometric dimensioning and tolerancing Experience in the management of technical projects Strong communication skills, with ability to work with multidisciplinary project teams and interact with people of different skillsets, job functions, and abilities. Strong organizational skills with the ability to lead projects, manage multiple concurrent projects, and plan, prioritize, and document work. Experience and acumen in solving multi-disciplinary electrical, thermal, mechanical, and materials problems for space solar panel products that must survive in multi-effects environments. ADDITIONAL QUALIFICATIONS: Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus. Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing. Must be physically able to commute to buildings Occasional exposure to dust, fumes and moderate levels of noise. WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Biow at [email protected] dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

ABOUT ROCKET LAB Rocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. Join our pioneering team and launch your career to new heights!SOLAERO This is a rare opportunity to play a key role in Rocket Lab's evolution into an end-to-end space company that delivers launch, spacecraft, and on-orbit operations. The Space Systems Division is shaping Rocket Lab's future with Photon, our brand of high-performance satellites, enabling innovative missions in low Earth orbit and beyond including missions for NASA to LEO, the Moon, and Mars and commercial customers including leading the design and manufacture of 17 high power telecommunication spacecraft buses for Globalstar. Rocket Lab is also growing spacecraft components business, anchored on the acquisition of Sinclair Interplanetary manufacturing reaction wheels and star trackers in Toronto, SolAero Technologies manufacturing solar power and primary structure solutions in Albuquerque, Planetary Systems Corporation manufacturing launch separation systems in Silver Spring, and Advanced Solutions, Inc. provider flight and ground software as a service in Denver. Our component's business is key to vertically integrating our spacecraft solutions and enabling constellations for customers. IT SYSTEMS ENGINEER I Located onsite at Rocket Labs Albuquerque, NM facility, the IT Systems Engineer I will be responsible for the implementation, administration, and operation of the different platform and operating system environments that are in use at Rocket Lab. These platforms and operating systems include: VMware Kubernetes Linux Windows Server and Client Network technology WHAT YOU'LL GET TO DO: Enable Rocket Lab Engineers globally, by leveraging the last platform technology, to efficiently design, manufacture, and manage the next generation of rockets and space systems. Assist our fantastic team by providing subject matter expertise and support for our different platforms, operating system environments, and supporting infrastructure. Carry out upgrades and maintenance with a focus on continuous improvement to provide a reliable and secure infrastructure. Assist with and/or manage project planning and deployment for platform initiatives. Support the Configuration Management function(s) at Rocket Lab through the implementation of standards for the deployment and management of the different platform environments to ensure: Compliance with Rocket Lab Policies, including cybersecurity policies, standards, and procedures. Improvements to increase reliability of systems. System High Availability and Disaster Recovery. Simplified and consistent environment management practises. Complete and compliant system baselines and hardening. guides for each OS and environment Automated build, deployment, and maintenance processes for each OS and environment. That the team is providing effective support. Clear and concise reporting on usage, uptime, support levels, etc. Comprehensive documentation of environments and support. Efficient cost control. YOU'LL BRING THESE QUALIFICATIONS: Bachelors Degree in IT field or equivalent experience with a high school diploma or GED (4+ total years) Strong knowledge of one or more of the following: Kubernetes, VMware, Linux, Windows, Configuration Management, Automation, and/or Infrastructure as Code, networking (LANWANWireless). THESE QUALIFICATIONS WOULD BE NICE TO HAVE: Scripting, automation, or Infrastructure as Code experience. O365, Azure, and/or AWS experience. Security frameworks and technology: ISO 27001, NIST 800-171, IPSEC, SSL VPNs, firewalls, etc. Experience with containerization technologies such as Docker and K8s. ADDITIONAL REQUIREMENTS: Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus. Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing. Must be physically able to commute to buildings Occasional exposure to dust, fumes and moderate levels of noise. WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Biow at [email protected] dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Job DescriptionThe New Mexico Disaggregated Manufacturing Organization (NM DMO) is growing rapidly as it brings Foveros HVM (High Volume Manufacturing) to life under a single organization with all segments of the process co-located at a single campus for the first time. As part of this exciting growth opportunity, the Fab 9 Wafer Level Assembly organizations are seeking a Process Engineer to join our team as a key contributor to our startup and ramp into HVM.In this role, you will contribute to startup and ramp into high-volume production for all aspects of your assigned module, including safety, quality, output, cost, and labor productivity. Specific contributions will include but are not limited to:Partnering with peer engineers and process development/transfer sites to become a technical expert on your aligned equipment and process.Installing and qualifying equipment and processes for successful factory startup and ramp.Collaborating with partner factories worldwide to transfer new processes, maintain copy exactly parameters, share learnings, and drive improvements to processes and equipment.Sustain and continuously improve your area of ownership by proactively identifying and implementing safety and ergonomic improvements, excursion prevention measures, and methods to increase equipment availability and utilization and reduce cost.Qualify and implement new hardware, software, and equipment upgrades.Partnering with the Manufacturing team to mentor and assist technicians with their technical development.The ideal candidate should exhibit the following behavioral traits:Willingness to thrive within an ambiguous environment, driving structure, framework, and processes as necessary.Demonstration of initiative, and evidence of the ability to be self-directing.Detail orientation.Excellent verbal and written communication skills, assertiveness, and the ability to influence stakeholders.Willingness to work effectively within and across organizations as well as lead and participate in team efforts.Willingness to multitask between process, equipment, factory sustaining, continuous improvement, process transfer, and cross-site technical leadership.Strong technical problem solving and data analysis skills including familiarity with Model Based Problem Solving (MBPS).Familiarity with statistical process control methodologies and engineering analysis tools.Evidence of the ability to develop, qualify, and implement process improvements.Comfortable working in a factory and/or lab environmentRelocation assistance provided.QualificationsYou must possess the below minimum qualifications to be initially considered for this position. Preferred qualifications are in addition to the minimum requirements and are considered a plus factor in identifying top candidates.Minimum QualificationsCandidate must possess a B.S., Masters or Ph.D. degree in an Engineering and/or Science discipline such as Physics, Applied Physics, Chemistry, Materials Science, Chemical Engineering, Mechanical Engineering, or Electrical Engineering.2+ years experience (M.S. or Ph.D.) or 5+ years of experience (B.S.) in semiconductor fabrication process and/or equipmentPreferred Qualifications5+ year in semiconductor industry experience via graduate research, internship, or prior employment.5+ year in statistical process control techniques, data analysis, and model-based problem solving.Inside this Business GroupAs the world's largest chip manufacturer, Intel strives to make every facet of semiconductor manufacturing state-of-the-art -- from semiconductor process development and manufacturing, through yield improvement to packaging, final test and optimization, and world class Supply Chain and facilities support. Employees in the Technology Development and Manufacturing Group are part of a worldwide network of design, development, manufacturing, and assembly/test facilities, all focused on utilizing the power of Moore's Law to bring smart, connected devices to every person on Earth.Posting StatementAll qualified applicants will receive consideration for employment without regard to race, color, religion, religious creed, sex, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, military and veteran status, marital status, pregnancy, gender, gender expression, gender identity, sexual orientation, or any other characteristic protected by local law, regulation, or ordinance.BenefitsWe offer a total compensation package that ranks among the best in the industry. It consists of competitive pay, stock, bonuses, as well as, benefit programs which include health, retirement, and vacation. Find more information about all of our Amazing Benefits here.Working ModelThis role will require an on-site presence.

Job TypeFull-timeDescriptionAbacus Solutions Group: We're built on our shared core values! We are difference-makers, passionate about serving, we work hard with integrity and do the right thing. Difference makers means that we look at every opportunity as a chance to make a difference. Passionate about serving means that we are always looking for ways to serve our customers and coworkers. Working hard and doing the right thing with integrity means that for every decision we make we first ask, "Is the decision consistent with our moral and ethical principles?" We hire, review, reward and recognize our teammates based on these characteristics, so it is important that you share these values to be part of the team.Position Overview: We're hiring a Senior Space Systems Engineer to join our team in support of the Space Systems Command in Albuquerque, NM. In this role, you will support development and definition, including performing risk assessments, management of interfaces, technical planning, requirements verification and involvement in systems architecture development. You will merge MBSE and systems-of-systems engineering and integration to create MBSE models that drive integration. Additionally, you must be experienced in providing support in systems/subsystem integration and test while working closely with program management to assure complete program integrity.Work Location: Kirtland AFB, Albuquerque, NMDuties and Responsibilities:Designing, developing, and supporting model-based systems to support a variety of systemsDeveloping and improving Systems Engineering processes for the program that are appropriate for all levels of system developmentEffectively communicating with all levels of the organization to determine process needs and to support other engineers as a model-based systems SMEPartnering with other Systems Engineers to design full life-cycle systems engineering processes that include documentation, workflow automation, efficiency measurement, bi-directional traceabilityRequirementsBachelor's degree in Aerospace Engineering, Mechanical Engineering, Electrical Engineering, Physics, Computer Science, or Computer Engineering and 15 years of relevant experience; Master's degree and 13 years of relevant experienceExperience with satellite ground systemsExperience with defining and executing MBSE projectsFamiliarity with MBSE tools, such as Cameo, MagicDraw or similar modeling toolsFamiliarity with DOORS or DOORs Next GenKnowledge of systems engineering and integration principles and conceptsAbility to lead systems engineering activities that define and evolve a system of systems baselineExperience with test and evaluationDesired Experience:Ability to integrate MBSE models and other technical baseline data, including CAD, Models, and SimAbility to work with senior client personnel, leaders, and decision makersExperience on programs migrating systems to the cloudINCOSE CertificationMBSE CertificationSysML CertificationSecurity Qualifications:Must have fully adjudicated DoD Top Secret clearance or DOE Q clearance with ability to obtain and maintain TS/SCIMust be a US CitizenPay & Benefits: $67-78/hr. Relocation assistance available. We offer a wide range of medical benefits, employee resources and strategic discount alliances. These benefits include co-pay medical benefits, company matching 401K, Choice Time Off, Long Term and Short-Term Disability Insurance, Life Insurance, and other ancillary benefits.All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations, and ordinances. We also consider qualified applicants regardless of criminal histories, consistent with legal requirements.Salary Description$67-78/hrPDN-9bd7630c-ea6e-4de1-b355-ed64e43fd72a

LHH Recruitment Solutions is seeking an experienced Thermal Engineer for a client in the aerospace industry, located in the Albuquerque, NM northeast area. This role will contribute to conceptualizing, evaluating, implementing, and managing thermal systems. Our client offers great benefits plus on-site perks which include a fitness area, shower facilities, a pickleball court, an outdoor dog kennel, and a relaxation zone complete with complimentary beverages and snacks. Daily company lunches are also prepared by an in-house chef. If this role sounds like it would be a good fit, submit an application for consideration!Responsibilities:Undertake the creation and execution of Thermal and CFD simulations aimed at predicting fluid dynamics, heat transmission, and associated phenomena crucial to bolstering the evolution of the High-Elevation Platform Hub (HEPH).Execute analyses involving CFD and thermal aspects, with the intent of refining blueprints and elevating the efficiency and dependability of HEPH sub-systems.Engage in collaborative ventures with cross-disciplinary groups to seamlessly integrate CFD simulations into the design workflow.Maintain up-to-date familiarity with the latest strides in Thermal engineering methodologies and technologies, particularly those suited for the advancement of HEPH or analogous undertakings.Conduct rapid-turnaround manual and spreadsheet computations for instances where prompt results are requisite.Draft comprehensive technical documents and deliver presentations elucidating discoveries to invested parties.Desired QualificationsA solid command of fluid mechanics, heat transfer, and pertinent principles as they relate to aerospace frameworks.Familiarity with programming languages like Python, Matlab, or C++.Acquaintance with avant-garde resolutions to existing thermal and flow predicaments encountered within aerospace contexts.Proficiency in utilizing CFD and thermal analysis software such as COMSOL or ANSYS Fluent.Outstanding prowess in troubleshooting and effective communication.Capability to operate autonomously while also contributing effectively to a multi-faceted collective.Preferred background in multiphase flow, reacting flow, and radiation thermal modeling within the aerospace arena.Highly desirable experience involving thermal experimentation and instrumentation.Preferred familiarity with FEA analysis software, with expertise in tools like Ansys Mechanical/ ABAQUS being a plus.Education and Background:A Bachelor's or Master's degree in Mechanical Engineering or a closely related discipline.A minimum of 4 years of hands-on involvement in Thermal engineering and CFD, preferably in aerospace applications.If this role sounds like a good fit for you, apply today!

Our client is a local multidisciplinary civil engineering firm looking to add a Civil Engineer to their family-like team! They work projects of all sizes, and properly manage them. They are known for having an incredible work environment and culture. This company gets you excited for Monday's, and treats you like gold!What They Have For You Competitive base salary plus performance based bonuses. NO Micromanaging! Tight knit company with a family-like feel! Diverse project types Benefits including Medical/Dental/Vision insurance, 401k with a company match, flex-time/hybrid scheduling, company outings, and more!What You Will Need/what You Will Be Doing3-8 years of experience in land development/site development (all are welcome to apply)Bachelor's degree in civil engineering or a related field.Must have EIT or PE preferredAutoCAD and Civil 3D experience is required.Needs to have the ability to work collaboratively with co-workers and management. ALL CONVERSATIONS ARE STRICTLY CONFIDENTIAL * To be considered, please apply with a resume. If you have any other questions or wish to discuss any other engineering positions, reach out to John Serrano with gpac at [email protected] or (605)800-4271All qualified applicants will receive consideration without regard to race, age, color, sex (including pregnancy), religion, national origin, disability, sexual orientation, gender identity, marital status, military status, genetic information, or any other status protected by applicable laws or regulations.GPAC (Growing People and Companies) is an award-winning search firm specializing in placing quality professionals within multiple industries across the United States since 1990. We are extremely competitive, client-focused and realize that our value is in our ability to deliver the right solutions at the right time.