Plant Engineer Salary in Philadelphia, PA

Pennoni is a multidisciplinary consulting engineering firm that was founded over five decades ago!  We approach engineering challenges from a wider spectrum of angles than most, from land development to energy management.  Our goal is to help communities and private sector clients alike navigate the ever-changing technological advancements available while learning how best to integrate “smart” solutions into the current landscape; this ultimately contributes to resilient and sustainable planning.  Our combination of talent and experience generates unprecedented solutions for diverse & iconic projects around the globe! Pennoni is hiring!  In particular, we are looking for a Project Engineer to help lead our water & wastewater projects on a full-time, direct basis at our office in Philadelphia, PA. Primary Responsibilities:Work on a variety of wet utilities (water / wastewater) projects; this includes municipal engineering for Pennsylvania municipalities (including subdivision & land development reviews, road rehabilitation, stormwater management / MS4, capital improvements, grant writing, and attendance at public meetings).Contribute to infrastructure planning efforts; this includes providing recommendations & cost estimates, coordinating feasibility studies, and developing solutions.Serve as our Engineer of Record on design/construction activities for plants and/or pipeline projects.Preparation of engineering reports.Work on project design and permitting.Coordinate master planning-related tasks.Perform (outdoor) construction inspection work, when needed.Additional tasks may be assigned, as needed. Basic Requirements:Bachelor’s degree in an Engineering-oriented discipline (preferably Civil Engineering or Environmental Engineering).6+ years of professional experience working in Engineering, preferably with infrastructure / utility projects. Preferred Qualifications:PE Experience working on infrastructure / utility projects, especially with wet utilities.Project management experience (i.e.:  preparing & managing budgets while overseeing project schedules / ensuring timely completion) is a plus!Experience working on design and permitting activities.Experience working with water resources (such as stream and waterway restoration) is a plus!Proficiency with engineering tools (e.g.:  CADD, GIS, analytical programs, etc.); experience with AutoCAD, Civil 3D, and ArcGIS / ArcInfo is preferred.Experience with H&H tools (e.g.:  InfoSWWM, HydroCAD, OpenFlows WaterCAD, WaterGEMS, & SewerGEMS) is a plus!Proficiency on all standard Microsoft Office software applications (especially Word, Excel, and Outlook).Proven ability to work in a team environment with minimal supervision while displaying a positive attitude.Excellent organizational skills, especially with a proven ability to work in a self-motivated manner while effectively multi-tasking and prioritizing multiple assignments.Excellent communication skills (verbal & written); technical writing skills are strongly preferred! Why Work With Us? Pennoni is an ENR Top 500 consulting engineering firm.  At our core, we recognize that the unique qualities of Pennoni’s individuals are essential for innovation and growth as a whole; we offer many opportunities to help you build your career!  We continually strive to build a great workplace where our employees trust the people they work for, enjoy the people they work with, and take pride in what they do. Equal Opportunity Employer / Veterans / Disabled

My client is seeking individuals with 4-5 years of Engineer / Project Engineer experience, ideally who are familiar with heavy construction, including: highways, water plants, wastewater plants, and industrial facilities. Ideal candidates possess strong personal initiative, excellent planning and problem-solving capabilities, effective interpersonal skills, and an unwavering commitment to safety.MUST HAVE - CONCRETE, FOUNDATION OR Drilling Experience.Responsibilities:• Impact through review, coordination, submission, and tracking all project submittals• Perform construction design including form/pour drawings, major pick plans, and layout of pipe/equipment/conduit• Analyze survey reports, maps, drawings, blueprints, and other topographical and geographical data to plan projects• Manage project controls and performance with field personnel to track, control and deliver successful results• Coordinate, submit, and track all project submittals• Generate job cost reports for all projects involved• Inspect project sites to monitor progress and ensure conformance to design specifications and safety standardsPosition Requirements:• Bachelor's Degree in Civil Engineering, or related• 4+ years of experience working in the heavy civil industry• Ability to meet fast-paced, changing schedules and priorities• Keen awareness of industry recommended practices, OSHA requirements, equipment, and QA/QC• Microsoft Office proficiency• Valid driver's license• Local travel (within 1-2 hours)Additional Skills & Experience & Certifications:• OSHA 10-Hour Certification, a plusPerks (At least the following):• Competitive wages, incentive compensation, 401(k) match• Graduated paid-days-off policy• Opportunities for personal career growth and company ownership #LI-DNI #1158342 - Vincent Beck

My Client is seeking individuals with 5-10 years of Engineer / Project Engineer experience, ideally who are familiar with heavy construction, including: highways, bridge, deep foundations, water plants, wastewater plants, industrial electrical, marine, and industrial facilities. Ideal candidates possess strong personal initiative, excellent planning and problem-solving capabilities, effective interpersonal skills, and an unwavering commitment to safety.ResponsibilitiesImpact through review, coordination, submission, and tracking all project submittalsPerform construction design including form/pour drawings, major pick plans, and layout of pipe/equipment/conduitAnalyze survey reports, maps, drawings, blueprints, and other topographical and geographical data to plan projectsManage project controls and performance with field personnel to track, control and deliver successful resultsCoordinate, submit, and track all project submittalsGenerate job cost reports for all projects involvedInspect project sites to monitor progress and ensure conformance to design specifications and safety standardsPosition RequirementsBachelor's Degree in Civil Engineering, or related2+ years of experience working in the heavy civil industryAbility to meet fast-paced, changing schedules and prioritiesKeen awareness of industry recommended practices, OSHA requirements, equipment, and QA/QCMicrosoft Office proficiencyValid driver's licenseLocal travel (within 1-2 hours) #LI-DNI #1159104 - Vincent Beck

Company & Position Overview: J.B. Poindexter & Co (JBPCO) is a privately held diversified manufacturing company forecasting $2.5B in annual revenue and 8,000+ team members in 2023. The nine operating subsidiaries, covering over 50 locations, are engaged in the production of commercial truck bodies, step-vans, utility trucks, funeral coaches, limousines, electric and alternative fuel vehicles, pickup truck bed enclosures, precision machining, and expandable foam plastic packaging. For more information, visit www.jbpoindexter.com .Automation Engineer will be responsible for leading automation projects from concept to implementation. After implementation, the projects will be handed over to the plant manufacturing engineering and personnel for the start of production. The project's life cycle includes, but is not limited to, identifying, justifying, writing the scope of work, selecting the preferred vendor/integrator, ensuring the solution is of good quality and design, ensuring the equipment is up to JBPCO standards, and implementing the solution at the plant. The Automation Engineer will be executing multiple projects at one time, potentially in different facilities across North America. Within the JBPCO portfolio, the automation engineer could be leading projects that vary from laying fiberglass to machine tending to assembly. The automation projects at their core are based around safety, labor dependency, quality, workflow, and delivery improvements.Essential Job Functions: Leads collaborative discussions between leadership and key stakeholders to determine automation capabilities, opportunities, and goals. Assist in the Factory-of-the-Future visions and road mapping activities associated. Initiate and lead new process development projects using a collaborative team approach including driving product design changes / design for manufacturing (DFM). Leads Concept-to-Commissioning process for automation systems, working closely with internal manufacturing customer and external system integrator. Develop strategies and initiatives to quickly leverage improvements across the enterprise through the strategic design and deployment of communized, scalable equipment systems. Develop procedures to aid the successful rollout of automation in the plants. Act as a change agent to lead change and drive technical innovation within individual plants and across the enterprise. Work cross-functionally and collaboratively, at all levels in the organization, to gain buy-in and ensure successful implementation of projects, strategies, and initiatives. Confers with planning and design staff concerning product design and tooling to ensure efficient Lean production methods. Confers with management, engineering, and other staff regarding manufacturing capabilities, production schedules, and other considerations to facilitate production processes. Drives PFMEA and other Quality Risk Assessment activities. Leads design and implements automated systems for use in fabrication, assembly, and other manufacturing processes. Develop equipment specifications with vendors to meet manufacturing requirements, and arrange for purchase of equipment, materials, or parts. Evaluate equipment according to specifications and quality standards through design reviews, and gated acceptance testing. Works with Business Units on production times, staffing requirements, and related costs to provide information for stakeholder decisions. Adheres to Quality policy by exceeding customer expectations, being customer focused and supporting continuous improvement activities. Adheres to JBPCO and industry safety policies and standards 100% of the time, including but not limited to, RIA, ANSI, ISO, IEEE, and NFPA. Champion automation projects that will reduce risk, improve throughput, safety, quality, space efficiency, and cost effectiveness. Automation project task can include, but not limited to, design and evaluate process and fixtures, preparing concept layouts, drawings, various flow diagrams. Utilize project management skills to maintain an appropriate level of project control with respect to project budget, project timeline, resource allocation, document control, and issuance of purchase orders. Use mathematical modeling, testing and other tools to verify, validate or assess process capability. Create and maintain the required level of control with all JBPCO documents, included but not limited to, solid models, drawings, procedures, and work instructions. Lead training efforts across the enterprise to enable manufacturing operations to be self-sufficient at running, maintaining, and modifying automation systems. Execute or assist vendors/integrators with standardized Task-Based Risk Assessment in accordance with A3 and JBPCO (ANSI/RIA TR R15.306). Work with maintenance on policies, procedures, and spare parts. Lead and train the Business Units on automation safety standards, mechanical and electrical. Qualifications: A self-starter with strong project leadership experience. Successful implementation of automation within a traditionally manual manufacturing environment. Experience with various types of automation, automation vendors, and automation applications. Experience in a high-volume, complex manufacturing environment and/or high-mix, low volume manufacturing environment. Ability to communicate, collaborate, and build rapport with personnel at all levels in a manufacturing environment. Understanding of manufacturing design elements/tools/systems, processes, and regulatory requirements. Understanding of design principles such as Data Analysis, DOE, FMEA, DFM/DFA. Must possess excellent automation/electrical/mechanical aptitude. Ability to work collaboratively within a team as well as independently. Automation experience including manufacturing line development and robotics training. Must have a passion for safety, workplace organization, and continuous improvement with a focus on Lean Tools and Lean implementation. Knowledge of Automation and Process Integration. Proficient with computer systems and software packages such as Microsoft Word, Excel, Power-Point, and Outlook (email). Must have a valid driver's license and passport. Preferred: Understanding of electrical standards for US, Canada, and Mexico. Optional: 3D CAD Competency (SolidWorks Preferred). Optional: Visual Basic Programming, Ladder Logic, other programming knowledge. Education: BSME, BSIE, BSEE or equivalent. Six years or more of directly related experience. Travel Expectation: 25% anticipated.J.B. Poindexter & Co., Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.#LI-EC1 Travel Required: Yes Virtual Job: false

This position is based in Plumsteadville, PAJob Summary:Executes and manages assigned projects in accordance with the Airgas Specialty Gases Project Management process. The function includes project planning and scheduling, scope definition, engineering design and review, functional and parts specification, budgeting, cost control, quality assurance, coordination of risk assessment and mitigation, planning maintenance and procedures, communications and project documentation. Obtains technical guidance and consultation from Airgas Engineering and other experts/Design Authorities as needed.Job Responsibilities: Maintain a zero accident safety record.Keep safety as the top priority in every project.Follow all applicable HSE procedures and lead by example by working safely in all situations.Completes Good Catches and participation in monthly safety meetingsParticipate in the investigation and follow-up of HSE-related incidentsDevelop concrete project scope, utilizing input from stakeholders including management, HSE, plant operations, engineering, maintenance, automation and others as appropriate.Assists with economic analysis of proposed projects and develops alternative solutions.Assists with development of proposals, including technical proposals and supporting documentation.Develop P&ID and system mechanical lay-out.Coordinates or conducts configuration of system PLCs.Coordinates or prepares electrical & instrumentation diagrams.Specifies equipment appropriate for the project functionality.Prepares equipment cost estimates and engineering estimates in support of proposals.Generates buy-in and cooperation from relevant stakeholdersResponsible for personal and project safety performance.Executes projects in compliance with all applicable company, federal, state and local regulations.Executes projects in accordance with project management procedure including design review, hazards analysis, MOC, PSSR and SOP development and operator training.Responsible for completing projects on time and within budget.Ensures that project and design are compliant with medical/Drug manufacturing requirements and CGMPDevelops engineering packages for bid (RFQs) that result in fair and accurate pricing from vendors and eliminates, as much as possible, field change notices.Procures equipment.Coordinates or conducts construction and project installation.Coordinates or conducts system testing/check-out.Member of the installation/start-up supervision team.Reports on safety, budget, schedule and quality.Keep all stakeholders informed of plans, progress and challenges, manage stakeholder expectations.Qualifications: Technical BS degree required; BS Chemical or Mechanical Engineering preferred.Minimum of 7 years of engineering and project management experience in a gas or chemical manufacturing business.Experience managing project budgets of $5MM+Experience managing projects with medical applicationsTechnical project experience preferred.Familiarity with mechanical, electrical, instrumentation, operation and controls of process equipment utilized in Airgas technologies.Familiarity with project management tools and techniques such as scope definition and changes, project scheduling, critical path, estimating, budgeting, reporting and cost control preferred.Ability to interpret and apply Airgas Industrial Management System, and relevant codes and oversight organizations such as ANSI, ASME, NFPA, CGMP and CGA.Ability to understand and interpret applicable specifications and standards.Must be a self starter and capable of moving projects along with minimal direction from his or her manager.Demonstrated ability to handle multiple tasks, prioritize work, and effectively works within a project execution team.Familiarity with vendors and suppliers of process equipment and services preferred.Excellent MS office product skills, including Outlook, Excel, Powerpoint, Project and Word.Excellent written and verbal communications skills.Knowledge of instrumentation, electrical and PLCs desirableAbility to coordinate with other groups within ASG, Airgas, external customers, and suppliersSome travel is required, up to 20% of the timeLight to moderate physical activity is required eg. Bending, walking, climbing ladders, occasional lifting to to 30 lbs.

Comcast brings together the best in media and technology. We drive innovation to create the world's best entertainment and online experiences. As a Fortune 50 leader, we set the pace in a variety of innovative and fascinating businesses and create career opportunities across a wide range of locations and disciplines. We are at the forefront of change and move at an amazing pace, thanks to our remarkable people, who bring cutting-edge products and services to life for millions of customers every day. If you share in our passion for teamwork, our vision to revolutionize industries and our goal to lead the future in media and technology, we want you to fast-forward your career at Comcast.Job SummaryThe Building Engineer & Maintenance Lead at Comcast Technology Center will provide the highest level of customer service and will support all and building infrastructure & operations. The primary function of this position will be to support & assist in the coordination and supervision of Property Management operations at the Comcast Technology Center.Job DescriptionCore ResponsibilitiesSupport the on-site building engineering team to ensure all building services such as preventative maintenance, systems management and contractor repairs are occurring according to current policy and procedure.Perform inspections for interior & exterior core & shell elements of the building & property & create work orders & project scopes to complete repairs when needed.Support scheduled work by contractors by providing oversight of third-party vendors, maintenance and operations activities.Assist in monitoring contractor activity as assigned to ensure safety procedures are being followed as outlined in the Comcast Technology Center policies and procedures. Including on site engineering team training & safety compliance.Ensure the contractor sign-in process and building policies and procedures are adhered to.Support energy saving opportunities & projects as assigned.Assist the Sr Director of Operations & as assigned with support for regular inspections and evaluation of building systems, HVAC equipment/systems, feature lighting, window shades, pest control, waste removal, wood floor systems, exterior paver systems, exterior landscaping, window washing, sphere & sculpture cleaning, plumbing, mechanical room conditions, as well as other repairs and maintenance as needed to ensure the systems & appearance of the systems & environment are maintained at a high level.Maintain the combustion engine run time logs & Philadelphia Air Management compliance & the fuel system maintenance & leak detection systems tracking.Support as assigned for the cleaning of the cooling towers, rainwater tanks, water treatment system testing.Support as assigned environmental health & safety compliance, high rise safety inspections, & FM Global inspections.Support all life safety & building systems maintenance & testing as assigned by the Sr Director of Operations.Assist with assembling the data for the building specific elements of the annual operations budget.Provide daily status updates to the Sr. Director of Operations and Property Management team regarding building status & ongoing project activities.Assist the Sr Director of operations with creation of project & work scopes/specifications, create RFP's and attain quotes from contractors for work or services as required.Assist with the review & approval of invoices, maintaining the PO log and issuing purchase orders to contractors.Consistent exercise of independent judgment and discretion in matters of significance.Regular, consistent and punctual attendance. Must be able to work nights and weekends, variable schedule(s) and overtime as necessary.Other duties and responsibilities as assigned.Supervisory Responsibilities This position reports directly to the Sr Director of Operations & acts as a secondary team point of contact for the day to-day maintenance of the Comcast Technology Center. Responsibilities include oversight and scheduling of all assigned contractor work, the day-to-day maintenance of the building, interfacing with building Tenants when applicable, addressing work orders and resolving problems.Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.Education and/or Experience Bachelor's Degree preferred.5+ years' experience in building operations & maintenance is required.Knowledgeable of building systems such as HVAC (Chillers, Cooling Towers, Pumps, etc.), building automation systems, fire alarm systems, electrical systems, lighting systems, water delivery systems, and overall MEP system knowledge.Knowledge of City of Philadelphia, NFPA & NEC code compliance & standards.Knowledge of and operating experience with automation systems such as BAS, lighting (Lutron), window shades and experience with MRI CMMS system.Ability to read, understand & interpret building drawings (blueprints) & submittals.Experience in energy performance monitoring, ASHRAE audits, Energy Star and sustainable building programs.Familiarity with LEED Green programs and certifications.Prior experience working with computer software such as Microsoft Outlook, Word, Excel, Power Point and SharePoint.Project management experience.Certificates, Licenses, RegistrationsLEED, CEM or Green Advantage designations are a plus.CFC Universal License is a plus.City of Philadelphia "A" Engineers License a plus.OSHA 30 or other Certification is a plus.BOMA or IFMA Accreditations a plus.Communication Skills Excellent verbal and written communication skills to interface with the management team, Tenants, vendors, contractors, building engineers and external services such as emergency response personnel.Other Skills and Abilities Sound judgment and decision-making skills.Be able to work in a fast-paced environment.Ability to provide exceptional customer service.Organized, prepared and punctual.Understanding of high-rise building systemsUnderstanding of maintenance standards, best practices & central plant operations preferred.Ability to be "on call" and respond to the site when needed. The position requires a daily on-siteEmployees at all levels are expected to:Understand our Operating Principles; make them the guidelines for how you do your job.Own the customer experience - think and act in ways that put our customers first, give them seamless digital options at every touchpoint, and make them promoters of our products and services.Know your stuff - be enthusiastic learners, users and advocates of our game-changing technology, products and services, especially our digital tools and experiences.Win as a team - make big things happen by working together and being open to new ideas.Be an active part of the Net Promoter System - a way of working that brings more employee and customer feedback into the company - by joining huddles, making call backs and helping us elevate opportunities to do better for our customers.Drive results and growth.Respect and promote inclusion & diversity.Do what's right for each other, our customers, investors and our communities.Disclaimer:This information has been designed to indicate the general nature and level of work performed by employees in this role. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications.Comcast is proud to be an equal opportunity workplace. We will consider all qualified applicants for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, veteran status, genetic information, or any other basis protected by applicable law.EducationBachelor's DegreeWhile possessing the stated degree is preferred, Comcast also may consider applicants who hold some combination of coursework and experience, or who have extensive related professional experience.Relevant Work Experience5-7 YearsPDN-9b106061-5652-4914-b48d-d72c764ac900

Location: REMOTESalary: $45.00 USD Hourly - $55.00 USD HourlyDescription: Our client is currently seeking a RF/DOCSIS Engineer Ideal Candidate:-Looking for 2 mid level engineers to work as outside RF plant engineers - will be primarily remote with some travel as needed (no more than 10%). - Need strong RF experience - understanding RF maps, RF nodes, spectrum maps, etc. and understand the connections within RF - Primarily troubleshoot data transmission and transport- handling RF escalations so must be technical and experienced -Must have exposure to DOCSIS/understanding of DOCSIS platforms- Experience evaluating and troubleshooting power supply for radios and nodes - Working with SNMP/Simple Network Management Protocol for IP networks - Any experience with network topology is a huge plus -Deploying over 7,000 CBRS radios in the next 6 months - huge undertaking-Confirm device power supplies - hands on experience working with Cable Modem Termination Systems (CMTS) -Provide support to installers live in the field on modem support, upstream downstream power, and evaluate signal to noise ratio-Will be working on basic RF troubleshooting and cable modem support -Troubleshooting daily - this team is an escalation point for outside engineers -Advise on risk mitigation within RF - must have 1+ years of experience with DOCSIS (telecom specific) Contact: [email protected] job and many more are available through The Judge Group. Find us on the web at www.judge.com

The Process Engineer will be required to define, document, and implement the best manufacturing technologies while developing, maintaining and implementing machinery and processing specifications. The individual will be responsible for developing and implement engineering projects as assigned by the Director of Production Engineering and take responsibility for execution of the assigned scope of work within the constraints of the schedule, budget, and specifications. The position requires a high degree of responsibility, leadership, decision making ability and self-sufficiency. ResponsibilitiesAct as a processing subject matter expert with the team in support of the project management, automation and performance optimization groupsDefine and develop all aspects of dairy processing equipment used in manufacturing of greek yogurt and non-dairy productsParticipate in all phases of a project from initial team meetings though pre-award support, proposal generation, installation, commissioning and start up as assigned by the Project Manager, specify processing equipment which meet project expectations within the time and budget constraints of the approved projectProvide guidance and expertise to plant operations, project managers and other functions as necessary in the development of packaging related projectsSupport the R&D Innovation team, Corporate Quality and Sales & Marketing in the development of processing systems and solutions for Chobani's customers and consumersInteract with operation, marketing, quality, sales and multiple equipment suppliersMay be assigned as project manager on specific projects as neededRequirementsBachelor's degree in Mechanical, Chemical or Manufacturing engineering programs (or equivalent experience)1-5 years of experience in a similar engineering roleExperience in processing equipment and materials as related to the food and beverage industryWorking knowledge of project life cycle deliverables, contract & scheduleKnowledge in sizing pumps, piping, and other general dairy processing equipmentMay be required to work in a site environment in the presence of heavy equipment, smoke, dust and noiseProficient in the use Microsoft Office software, Microsoft Project, CAPE or TOPS, and AutocadPro-activity, personal drive, decisiveness, commercial / business acumen, communication skills, excellent teamwork skills, organizational competency and the ability to prioritizePreferred experience in dairy processing processes, including pasteurization, separation, etc.

Senior Plant EngineerDirect HirePhiladelphia, PA (onsite)Salary: $130k-150k depending on experiencerelo help offeredMust be a US citizen (sponsorship and C2C not available)Must have a degree in Mechanical EngineeringMust have Cell therapy manufacturing experienceMust have at least 5 years of biopharma/life sciences industry experienceThe Senior Plant Engineer is responsible for the operation and optimization of the equipment, systems and utilities of a cGMP Cell Therapy Manufacturing Facility. Collaborate with Maintenance and Metrology groups to develop programs for equipment maintenance and calibrations. Coordinate with the Facilities, Engineering, Operations and Quality teams to ensure maximum uptime and efficiency of all systems and equipment.Primary ResponsibilitiesSupport the design, installation, start-up, commissioning, qualification and maintenance of equipment, systems and utilities associated with cGMP Manufacturing, Laboratories and Warehouse.Demonstrate a strong understanding of HVAC, controls, mechanical, electrical and utility systems, and be able to troubleshoot as necessary.Understanding of thermodynamics, psychrometric properties and HVAC/mechanical design is highly desirable.Monitor and respond to alarms generated from the BMS/QEMS, including off-hours and weekends.Responsible for launching and/or supporting technical investigations, deviations, CAPAs, etc. related to GMP facilities, utilities, and equipment.Develop and/or enhance departmental standard operating procedures.Ensure through continuous improvement and routine monitoring that equipment works to design and manufacturer's specifications.Participate in the planning, design, budgeting, scheduling and execution of assigned projects.Establishes programs and solutions for increasing uptime and for equipment problems that affect the manufacturing process.Independently applies advanced engineering techniques and analysis and provide technical guidance to less experienced design and engineering personnel.Conduct routine inspections of premises and equipment.Oversee work performed by maintenance and/or external contractors to ensure conformance to design and industry standards.Other duties as required.Position RequirementsBS or MS in Mechanical Engineering field is required.5 years of related BioPharma/Life Sciences experience required.Prior experience with Facilities operations in a cell therapy manufacturing facility, or experience with cell therapy manufacturing facility MEP design is highly desirable.Has comprehensive understanding of principles, theories, concepts, and industry practices and standards and their application.Extensive knowledge and experience designing/operating to ASHRAE, ISO, ISPE, SMACNA, etc. is highly desirable.Experience using Computerized Maintenance Management Software (Blue Mountain) is preferred.Experience using Building Management Systems (Siemens - Apogee/Desigo) and Environmental Monitoring Systems is preferred.Demonstrable experience with cGMP capital, maintenance, and operating projects.Prior experience using Reliability Centered Maintenance is highly desirable.Excellent oral and written communication skills required.The physical demands described here represent those that an employee must meet to perform the essential functions of this job successfully. Reasonable accommodations may be made upon request to enable individuals to perform essential functions. Please contact Human Resources to request an accommodation.Physical Demands and Activities Required:Must be able to wear appropriate cleanroom attire and all Personal Protective Equipment (PPE), i.e., scrubs, gowning coveralls, masks, gloves, etc.Must be able to work in a cleanroom lab setting with biohazards / various chemicals.Must meet requirements for and be able to wear a half-face respirator.Able to stand and/or walk 90% (and sit 10%) within your scheduled workday, which may include climbing ladders or steps.Ability to crouch, bend, twist, reach, and perform activities with repetitive motions.Must be able to lift and carry objects weighing up to 20 pounds.

This is a direct-hire (permanent/salaried) position with our Biotech client in Philadelphia, PA. It's 100% on-site, so candidates must be local or open to relocation to Philadelphia. Candidates must have solid hands-on experience with cell therapy manufacturing for consideration.OverviewThe Senior Plant Engineer is responsible for the operation and optimization of the equipment, systems and utilities of a cGMP Cell Therapy Manufacturing Facility. Collaborate with Maintenance and Metrology groups to develop programs for equipment maintenance and calibrations. Coordinate with the Facilities, Engineering, Operations and Quality teams to ensure maximum uptime and efficiency of all systems and equipment.Primary ResponsibilitiesSupport the design, installation, start-up, commissioning, qualification and maintenance of equipment, systems and utilities associated with cGMP Manufacturing, Laboratories and Warehouse.Demonstrate a strong understanding of HVAC, controls, mechanical, electrical and utility systems, and be able to troubleshoot as necessary.Understanding of thermodynamics, psychrometric properties and HVAC/mechanical design is highly desirable.Monitor and respond to alarms generated from the BMS/QEMS, including off-hours and weekends.Responsible for launching and/or supporting technical investigations, deviations, CAPAs, etc. related to GMP facilities, utilities, and equipment.Develop and/or enhance departmental standard operating procedures.Ensure through continuous improvement and routine monitoring that equipment works to design and manufacturer's specifications.Participate in the planning, design, budgeting, scheduling and execution of assigned projects.Establishes programs and solutions for increasing uptime and for equipment problems that affect the manufacturing process.Independently applies advanced engineering techniques and analysis and provide technical guidance to less experienced design and engineering personnel.Conduct routine inspections of premises and equipment.Oversee work performed by maintenance and/or external contractors to ensure conformance to design and industry standards.Other duties as required.Position RequirementsBS or MS in Mechanical Engineering field is required.5 years of related BioPharma/Life Sciences experience required.Prior experience with Facilities operations in a cell therapy manufacturing facility, or experience with cell therapy manufacturing facility MEP design is highly desirable.Has comprehensive understanding of principles, theories, concepts, and industry practices and standards and their application.Extensive knowledge and experience designing/operating to ASHRAE, ISO, ISPE, SMACNA, etc. is highly desirable.Experience using Computerized Maintenance Management Software (Blue Mountain) is preferred.Experience using Building Management Systems (Siemens - Apogee/Desigo) and Environmental Monitoring Systems is preferred.Demonstrable experience with cGMP capital, maintenance, and operating projects.Prior experience using Reliability Centered Maintenance is highly desirable.Excellent oral and written communication skills required.