Machine Operator Salary in Boston, MA

Job Title Lead Building Operating Engineer Job Description Summary Responsible to ensure the proper efficient operations and maintenance of the mechanical electrical and plumbing systems for the assigned facility. The performance of all necessary maintenance and operational tasks are developed to assure maximum life and reliability of all mechanical/ electrical/plumbing systems. Typically, this position does not have a Chief Engineer on-site at the building and is sometimes the solo engineer at the building. This position may also include the supervision of maintenance staff at the building depending on the size and complexity of the assignment. Job Description ESSENTIAL FUNCTIONS AND RESPONSIBILITIES• Assist with or conduct the daily operations and maintenance of the mechanical, electrical and plumbing systems and general maintenance requirements for the buildings• Supervise maintenance staff when applicable and assign, and monitor maintenance activities and projects• Perform preventive maintenance duties, including changing filters, lubricating motors, replacing lamps, ballasts and fixtures, Inspecting and adjusting belts, replacing motor bearings, aligning shafts, and other inspections and maintenance recommended by equipment manufacturers• Recommend improvements to the preventive maintenance program on an ongoing basis• Develop and maintain effective building-specific maintenance procedures• Coordinate maintenance efforts with outside contractors and technicians• Maintain stock and inventory control• Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns• Comply with all applicable codes, regulations, governmental agency, and company directives as related to building operations and practice safe work habits• Ensure management team is informed of current building operations by compiling and submitting monthly reports• Complete all required C&W Safety Training as scheduled annually.• Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hoursKEY COMPETENCIES• Communication Proficiency (oral and written)• Organization Skills• Technical Proficiency• Decision Making• Problem Solving/AnalysisIMPORTANT EDUCATION• High School Diploma or GED Equivalent• Graduate of apprentice program or trade school preferredIMPORTANT EXPERIENCE• 5+ years of related trade experience in operating mechanical, electrical and plumbing systems in a commercial property settingADDITIONAL ELIGIBILITY QUALIFICATIONS• Appropriate license/permit for trade as may be required, i.e. Journeyman or Master Electrician License, City Licenses, Operators License, Steam Engineers License, etc.• Possess a valid "Universal" level certification for CFC and HFC based refrigerants (EPA Section 608); to service, repair, or dispose of equipment that could release ozone depleting refrigerants to the atmosphere or any similar combination of education and experience• Possess and maintain a valid driver's license and good driving record with periodic checks• Basic Computing Skills in Outlook, Excel & Word• Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc.• Knowledgeable in energy management systems, techniques and operations.• Thorough knowledge in all building systems operations, maintenance and repairMay be only maintenance staff member on duty during certain shifts; may be required to work extended periods of time without relief when responding to priority/emergency situations (including overtime type assignments); may require shift work and/or on call dutiesWORK ENVIRONMENTThis job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Regularly required to travel outside between properties in varying weather conditions.PHYSICAL DEMANDSThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.• Must have ability to stoop, stand, climb, frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices• Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine• Involves movement between departments, floors, and properties to facilitate work• Ability to speak clearly so others can understand you• Ability to read and understand information presented orally and in writing• Regularly required to utilize vision abilities, allowing reading of printed material, drawings, and schematicsAAP/EEO STATEMENTC&W provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Further, the company takes affirmative action to ensure that applicants are employed and employees during employment are treated without regard to any of these characteristics. Discrimination of any type will not be tolerated.OTHER DUTIESThis job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice.#INDSkilledTradesCushman & Wakefield provides equal employment opportunity. Discrimination of any type will not be tolerated. Cushman & Wakefield is an Equal Opportunity / Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or any other characteristic protected by state, federal, or local law.In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or email [email protected] . Please refer to the job title and job location when you contact us.

Job Title Operating Engineer - 2nd Shift Job Description Summary Responsible to ensure the efficient operation and maintenance of mechanical, electrical and plumbing equipment and systems for the assigned property(s). Responsibilities include (but are not limited to) maintaining a clean and safe working environment, performing rounds, conducting routine assessments, performance of day-to-day preventive and corrective maintenance, painting, and housekeeping for assigned properties Job Description ESSENTIAL FUNCTIONS AND RESPONSIBILITIES• Perform all plumbing, electrical, or HVAC requirements of the building(s)• Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc.• Monitor and adjust all mechanical/pneumatic equipment, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings• Verify field conditions and perform any necessary repairs or adjustments• Monitor Energy Management• Repair doors, ceilings, hand railings, and floors and other general repairs, adjustments and installations about the property• Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories, etc.)• Perform preventive maintenance duties in accordance with C&W standards, building protocol, manufacturer recommendations and industry best practices. including changing filters, cleaning coils, flushing condensers, punching tubes, greasing fan, pump and motor bearings as required, inspecting and adjusting belts, replacing motor bearings, aligning pulleys and shafts, monitor condenser, chilled, heating and secondary water chemical treatment and its associated feed equipment, clean and maintain cooling towers, and perform annual inspections and other scheduled routines as directed.• Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps. Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of obstructions and debris• Check for properly operating emergency exit signs and lights and ensure free and clear access to emergency stairs and exits. Perform additional fire and life safety inspections as per NFPA and local jurisdiction, C&W standards, building protocol and as directed by superiors and property management• Document and report activities to supervisor• Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns• Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits• Complete all required C&W Safety Training as scheduled annually• Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hoursKEY COMPETENCIES• Technical Proficiency• Initiative• Flexibility• Multi-Tasking• Sense of UrgencyIMPORTANT EDUCATION• High School Diploma of GED Equivalent• Graduate of apprentice program or trade school preferredIMPORTANT EXPERIENCE• 5+ years of related work experience in operating mechanical, electrical, and plumbing systems in a commercial property settingADDITIONAL ELIGIBILITY QUALIFICATIONS• Appropriate license/permit for trade as may be required, i.e. Journeyman or Master Electrician License or City Licenses, such as Refrigeration Certificate of Fitness, High Pressure Boiler License, High Pressure Steam Operator, etc.)• May be required to have certification as a Universal Technician for CFC's depending on market licensure requirements• Possess and maintain a valid driver's license and good driving record with periodic checks (where applicable)• Basic Computing Skills in Outlook, Excel & Word• Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc.• Knowledgeable in energy management systems, techniques and operations.• Thorough knowledge in all building systems operations, maintenance and repair.May be only maintenance staff member on duty during certain shifts; may be required to work extended periods of time without relief when responding to priority/emergency situations (including overtime type assignments); may require shift work and/or on call dutiesWORK ENVIRONMENTThis job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Regularly required to travel outside between properties in varying weather conditions.PHYSICAL DEMANDSThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.• Must have ability to stoop, stand, climb, frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices• Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine• Involves movement between departments, floors, and properties to facilitate work• Ability to speak clearly so others can understand you• Ability to read and understand information presented orally and in writing• Regularly required to utilize vision abilities, allowing reading of printed material, drawings, and schematicsAAP/EEO STATEMENTC&W provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Further, the company takes affirmative action to ensure that applicants are employed and employees during employment are treated without regard to any of these characteristics. Discrimination of any type will not be tolerated.OTHER DUTIESThis job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice.Cushman & Wakefield provides equal employment opportunity. Discrimination of any type will not be tolerated. Cushman & Wakefield is an Equal Opportunity / Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or any other characteristic protected by state, federal, or local law.In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or email [email protected] . Please refer to the job title and job location when you contact us.

Are you a Backhoe Operator looking for a career instead of just another job? Do you want the chance to work for a company where advancement is generated internally? Would you like to work at a dynamic, energetic, growing company, with a strong family oriented culture in the Utility industry? If the answer is yes, Feeney Brothers Utility Services may be the place for you! Since our founding in 1988 safety, community, integrity, and innovation have been the cornerstones of our operations at Feeney Brothers. Feeney Brothers provides area utilities throughout New England with comprehensive solutions for completing complex projects in urban, suburban, and rural settings. We equip our qualified workforce with state-of-the-art training and innovative tools to provide excellent service to our customers in the safest manner possible. Feeney Brothers Utility Services is currently looking for Backhoe Operators to join our team as part of a utility crew. The biggest challenges of this Backhoe Operator role are the physical demands and operating in/dealing with the New England elements. If you believe this Backhoe Operator career opportunity is really for you please apply. This position would be a great building block for you and your family at a well-established and successful organization.JOB PURPOSEOperators drive, control, and maintain heavy equipment and other necessary machinery in a safe, efficient manner. Operators will work in a fast-paced environments. Safety is a top priority for Operators and must have knowledge of safe operation and driving practices to complete obligations. Operators report directly to the Foreman.DUTIES AND RESPONSIBILITIESExcavating trenches and structures, laying pipe and precast concrete structures, loading trucks and back-filling trenchesPlacing shoring and trench boxesOperates a crawler or rubber-tired machine mounted with an excavator bucketMay also be equipped with various hydraulic attachments (e.g. hammers, pipe vacuum)Performs daily inspection on equipment for issues and/or deficienciesCompletes inspection paperwork daily and notifies the Foreman of any issues/defectsMay assist the crew, when needed, in operating other equipment and/or helping the laborers on the groundPerforms other duties as assigned

DescriptionBackhoe Operator JOB PURPOSE Operators drive, control, and maintain heavy equipment and other necessary machinery in a safe, efficient manner. Operators will work in a fast-paced environments. Safety is a top priority for Operators and must have knowledge of safe operation and driving practices to complete obligations. Operators report directly to the Foreman. DUTIES AND RESPONSIBILITIES Excavating trenches and structures, laying pipe and precast concrete structures, loading trucks and back-filling trenches Placing shoring and trench boxes Operates a crawler or rubber-tired machine mounted with an excavator bucket May also be equipped with various hydraulic attachments (e.g. hammers, pipe vacuum) Performs daily inspection on equipment for issues and/or deficiencies Completes inspection paperwork daily and notifies the Foreman of any issues/defects May assist the crew, when needed, in operating other equipment and/or helping the laborers on the ground Performs other duties as assigned POSITION REQUIREMENTS CERTIFICATIONS AND QUALIFICATIONS 2A Hoisting License (at least) DOT Medical Examiners Certificate Valid Driver's License OSHA 10 We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law.Schedule: Home daily Monday to Friday Weekends as needed Year round work Ability to commute/relocate: Boston, MA: Reliably commute or planning to relocate before starting work (Required) Experience: Backhoe operation: 3 years (Required) License/Certification: Driver's License (Required)

100% Remote Contract 1099 or C2C 6 -9 month plusMUST be USCThe primary role of the Data Architect is to support and expand the Data & Analytics platforms that process, store, organize the data critical for the data and analytics team. This role will have expertise in data movement and database technologies support data analytics and Machine Learning (ML) / Artificial Intelligence (AI) capabilities in the cloud. This person is able to identify performance bottle necks in complex enterprise applications and identify tuning opportunitiesRequirementsResponsibilitiesPossess deep functional and technical understanding of the Machine Learning technologies (Google's Cloud Platform) and leverage it across Client's large, complex and diverse landscape.Analyze performance and scalability characteristics to identify bottlenecks in large-scale distributed systemsPerform root cause analysis of performance issues identified by internal testing and from customers and suggest corrective actionsBusiness acumen (strong understanding of how business operates, and how to harness data and analytics to meet business needs)expert at designing as well as developing all layers of an application and platformLeads the development of technology transitions or architecture evolutions by creating foundational examples of working solutions and coaches' teams on how to build on those examplesEngage early in project efforts to analyze current solutions, provide solution options and recommendations, understand business process impact, provide accurate estimates.Design and Architect applications across multiple domains including Data Engineering, Data Science, Data Viz and App development.Demonstrates deep understanding of business processes and technology building blocksLead collaboration with project teams, application, data, integration, infrastructure, and security enterprise architects to develop and deploy comprehensive solution architecturesEnsure projects are delivered in-line with design, roadmap and to the defined standards and best practices.Is skilled as a Data Architect who can design end-to-end data driven solutionsInfluences adoption working IT, Business and Architecture groupsCreates design considering data sources & dependencies, development landscape, deployment landscape.Generate ideas and suggestions for process and technical improvements for platforms and processes supported by the teamArchitect the GCP data platform to meet the non-functional requirements of the consumptions layer and solutions built on top of the data platform.Identify potential performance and availability challenges proactively, implement recommendations, and ensure that the systems' capacity and availability exceed requirements while ensuring the platform achieves business results.Partner with solution architects, data engineers, platform engineers and other team roles to assess the platform's needs, help design new capabilities, establish architectural roadmaps, design and run tests/proof-of-concepts, help troubleshoot problems, identify risks, and make recommendations.Comfortable with communication across all levels of department and create artifacts to clearly deliver the message.