Chemical Engineer Salary in Maryland, USA

JOB DESCRIPTION DAP is looking to hire Plant Engineering and Maintenance Intern for Summer 2024. Job Responsibilities • Follows all plant safety policies and procedures • Actively participates in continuous improvement projects (OEE, OBE, ZBY) • Assists with capital projects in all phases (concept, funding request, procurement, installation, and start-up) • Performs data analysis to determine performance of equipment and identify opportunities for improvement. • Supports the plant's predictive/preventative maintenance program • Maintains schedules and issues progress reports Goals/Milestones/Timelines• Assist with capital projects - Activities and timing TBD, depending upon project schedules • Conduct RCFAs - collect historical information and support Engineers to conduct RCFAs, risk assessment and recommend mitigations and resolutions • Continuous improvement projects o Participates in active projects. Tasks TBD depending on the project. o Perform time studies on packaging lines to determine bottlenecks o Analyze data from SCADA system and eMaint to determine improvement opportunities for OEE • Preventative / Predictive Maintenance o Utilize ultrasonic and infrared test equipment to analyze equipment performance vs. baseline measurements o Collect data to compile mean time between failure (MTBF) intervals where applicable Requirements Major: Chemical, Mechanical, or Electrical Engineering.• Completed sophomore year at a minimum. • Required knowledge of Microsoft Project, MS Office. AutoCAD experience a plus. • Statistical Analysis experience would be beneficial. • Excellent verbal and written communication skills • Ability to interact successfully with others. • Willingness to work with multiple engineering and engineering-related disciplines. • Must have solid time management skills, a strong work ethic, attention to detail, and most importantly, a strong desire to learn. About DAP DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products. DAP is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services. You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores. DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world. At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers. Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/ DAP - On the job since 1865.

We are excited to share once again TranSystems has been recognized as a top 100 design firm by Engineering News-Record in 2023.   For more than 50 years, TranSystems has committed to a mission of performing engineering and architectural planning, design, and construction solution services in a manner that is both safe and in compliance with all applicable regulatory and client requirements.  At TranSystems, we have established and continue to nurture a culture that is committed to providing quality services for our clients.  We’re looking for top talent to grow with our firm. Responsibilities What you'll be challenged to do: TranSystems is excited to announce we are actively searching for an Industrial, Piping, Process or Mechanical Engineer to join our Marine Industrial Department.  Performing design/analysis. Including Plant Layout (industrial, chemical, or manufacturing) and General Arrangement Drawings. Developing 2-D drawings for construction bidding and construction Developing process flow diagrams, piping, and instrumentation diagrams. Material handling and processing equipment selection/procurement. Processing piping, pump layout/design, general electrical and instrument and control design. Preparing contract documents. Performing evaluation studies and developing reports. Preparation of specifications. Performing field work during design, analysis, and construction phases.  Performing submittal reviews including equipment fabrication drawings. Preferred experience in 3-D model development for conceptual layout and client presentations.  Preferred experience in HVAC/Industrial ventilation calculations and design. Preferred experience in pump, blower, compressor, fan sizing Additional experience in generic structural equipment design a plus. Additional experience in electrical design and control & logic design a plus. Coordinating auxiliary design requirements with related disciplines. Assisting Project Manager in monitoring project tasks to maintain budget, schedule, and scope of work. Qualifications What you bring to our firm: 5 or more years of experience as a mechanical, chemical, industrial, electronics engineer Experience with MS Office, Plant 3D, AutoCAD, Revit, or other similar 2-D/3-D pipe design software. Familiar with pipe stress and flow modeling software. Effective communication skills.  Actively engages multiple perspectives when solving problems, seeks to learn from peers, and encourages reciprocal learning among team members. Actively advocates for full inclusion in the workplace, fostering an environment that welcomes diversity and values equity for all employees, partners, clients, and the communities that TranSystems serves. TranSystems is proud to be an equal opportunity / affirmative action employer and ensures nondiscrimination and equal employment opportunity in all programs and activities in accordance with all applicable laws and regulations. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sex, age, national origin, pregnancy status, marital status, sexual orientation, genetic information, citizenship status, disability, protected Veteran status or any other status protected by law. In compliance with the Immigration Reform and Control Act of 1986, we will hire only U.S. citizens and aliens lawfully authorized to work in the United States (if the position is or will be one which is subject to U.S. law).   As the employer of choice, we are committed to action and strive for a company that reflects the vast diversity of our country and the communities we serve. TranSystems is committed to embracing diversity in all forms, including race, culture, age, sexual orientation, gender identity, disability, veteran status, thought and religious background. We acknowledge the impacts of prejudice and discrimination on historically underserved communities. We commit to establishing a more diverse, inclusive and positive work environment that drives innovation. Recruiters or staffing agencies: TranSystems is not obligated to compensate any external recruiter or search firm who presents a candidate, their resume, or profile to a TranSystems employee without 1) a current, fully-executed agreement on file and 2) being assigned to the open position (as a search) via our applicant tracking solution. #LI-KK1

Requisition ID: 166656Job Level: Mid LevelHome District/Group: Kiewit Foundations CoDepartment: Field OperationsMarket: IndustrialEmployment Type: Full TimeLocationLive where you want, go where the work is! + 10% Field Premium while on project sites.We have projects all across the East Coast. This role would likely start in Maine, but over time will travel all throughout the east coast.Position OverviewAs a Superintendent, you will play a significant part in the success of Kiewit Foundations Co. by directly managing the execution of field operations. We rely on Superintendents to set the highest expectations among their crew(s) for safety, quality, schedule, cost performance and team development. Every day you will bring your hands-on attitude to not only work on some of North Americas largest and unique projects but to also build builders who will continue to shape our infrastructure for generations to come. A strong technical and practical background in specialty foundations and geotechnical construction is required. Also, excellent communication skills and the ability to work well in a team environment are considered critical to this position.District OverviewKiewit Foundations Co. is a full-service geotechnical foundation contractor operating across North America. Our experience and expertise cover a wide range of specialty foundation construction for both structural and ground improvement solutions. We operate in the transportation, power, water/wastewater, mining, building, industrial, and oil, gas, and chemical markets. As part of Kiewit we are integrated with 135 years of construction and engineering experience that provides wholistic solutions to the industry that are unmatched. Our rapidly growing foundations business, which includes drilled shafts, micro pile, driven pile, augercast-in-place pile, full displacement pile, soil mixing, support of excavation, anchors, tie-backs, stone columns, and other geotechnical solutions is a multi-faceted and leading-edge division of Kiewit focused on delivering differentiated solutions.Responsibilities Form and lead an effective discipline team, delegating responsibilities and setting goals Assist in the hiring, training and development of craft personnel (drillers, foreman, laborers, crane operators, etc.) Develop and maintain open communication with crews, field engineers/coordinators, Safety, Quality, and clients. Assist in preparing work plans and scheduling in determining manpower levels, material quantities, and equipment requirements. Examine/inspect field conditions and troubleshoot problems, correct inaccuracies, and implement cost saving measures. Monitor and adhere to established budgetary guidelines for job and ensure that cost control measures are being followed. Monitor job safety and provide job safety training and awareness for all personnel. Monitor quality standards and ensure that technical specifications are being met. Assist with developing entire job schedules, 90 day schedules, and three week schedules. Monitor job schedule and coordinate work with contractors and deliveries with suppliers and ensure inspections are scheduled appropriately. Advise senior level superintendents and/or project management of potential problems, work interferences, schedule difficulties, etc. Assist in resolving such problems as required.Qualifications 5+ years of experience in the planning, scheduling, and management of deep foundation and/or ground improvement operations 3+ years of supervisory experience as a superintendent Experience with and broad knowledge of foundation/ground improvement equipment (drills, concrete pumps, batch plants). How to use it properly and how to rapidly troubleshoot. Knowledge of proper pumping and placement of concrete and grout. Must be skilled in one of if not multiple of the following disciplines (pile driving, auger cast, small-diameter shafts, micro piles etc...) Experience working in a team setting and directing/reviewing the work of others Highly motivated, with a demonstrated passion for excellence and taking initiative Demonstrated commitment to ethics and integrity Passion for safety, with the ability to help us ensure that nobody gets hurt Strong interpersonal, written, and verbal communication skills The physical ability to freely access all points of a construction site in wide-ranging climates and environmental conditions and move objects up to 30 pounds Ability and desire to travel and relocate as business requires. Project assignments may involve full relocation or temporary assignments facilitated by a turnaround schedule. Ability to work in the United States without sponsorship, both now and in the future.Preferred Qualifications: Strong all-around knowledge of ground improvement techniques, structural deep foundation methods, and support of excavation (SOE) operations; Ground Improvement experience includes rigid inclusions, soil mixing, vibro-replacement (stone columns), vibro-compaction, compaction grouting, permeation grouting, jet grouting, and deep dynamic compaction. o Structural deep foundation experience includes micropiles, drilled shafts, auger-cast-in-place piles, driven piles. o Support of excavation experience includes secant pile, soldier pile, anchors, and tie-backs.Other Requirements: Regular, reliable attendance Work productively and meet deadlines timely Communicate and interact effectively and professionally with supervisors, employees, and others individually or in a team environment Perform work safely and effectively. Understand and follow oral and written instructions, including warning signs, equipment use, and other policies. Work during normal operating hours to organize and complete work within given deadlines. Work overtime and weekends as required. May work at various different locations and conditions may varyBase Compensation: $72,931 - $140,000(Actual compensation is subject to variation due to such factors as education, experience, skillset, and/or location)We offer our fulltime staff employees a comprehensive benefits package that's among the best in our industry, including top-tier medical, dental and vision plans covering eligible employees and dependents, voluntary wellness and employee assistance programs, life insurance, disability, retirement plans with matching, and generous paid time off.We are an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Total Safety is looking for an Air Tech to add to their safety conscious team! The Air Tech performs inspections, maintenance and repairs on various safety equipment which may include fixed and portable eyewash, safety showers, fall protection equipment, fixed ladders and portable gas monitors. Hole, fire and confined space watch. Helping lead fire protection technician with some fire protection equipment inspection, maintenance and repairs. The hourly pay range for this position is $20-23.Specific Job Duties And ResponsibilitiesReceipt, inspection, cleaning, servicing, reassembling and testing of various SCBA (Self Contained Breathing Apparatus) and other respiratory equipment and breathing air equipment in accordance with approved testing and service procedures.Routine inspection and maintenance of breathing air regulators and reducersCompletes all documentation and data entry associated with inspection and repair in a timely and accurate manner and obtains signature from customer so that proper invoicing and documentation can be provided to customer as required. This includes all inspection and repair documents, job cost billable expenses and time sheets.Learns to conduct detailed visual inspections and system functional tests of various systems and equipment for the purpose of reporting any deficiencies and corrective action recommendations to customer. Learns to assess the repair needed and to quote the customer price and delivery for repair or replacement.Assists others in facility including stocking shelves with clean, tested and ready to use equipment and pulling, staging and loading customer orders onto trucks for delivery. Maintains work area and other areas in a clean and orderly condition. Performs additional duties after trainingQualificationsEducation: High School diploma or GED. Associates degree, technical or military training strongly preferred.Experience: At least one (1) year of field experience in fire protection, petrochemical, oil refinery or related industry.Preferred: At least one (1) year of experience operation, maintenance, reassemble and test electronic safety equipment in accordance with manufacturers' specifications, including the ability to troubleshoot and diagnose assigned equipment problems and take corrective action within policy and procedure limitations.Required Licenses or Specific Training: Must have a valid driver's license from state of residence and valid proof of vehicle insurance. Must possess good driving record and be insurable for Total Safety vehicle insurance while driving company truck. Forklift experience preferred. Must have ability to pass internal forklift certification as required. Must be willing travel to customers site and available for travel for short and long-term out-of-town and/or offshore projects.Must have Class C driver's license with a DOT hazardous endorsement if required by facility. Ability to study for and pass any basic license requirements within six months of employment. Have or obtain applicable State Fire Marshal Licenses (if required by State) for appropriate areas of service within 6 months of hire date if land based. Must have ICC/NAFED certification.Other Required Skills, Knowledge or Abilities: Demonstrated ability to operate electronic safety equipment and understand production platform shutdowns performed through fire and gas detection systems.Ability to operate and maintain, reassemble and test electronic safety equipment in accordance with manufacturers' specifications.Ability to troubleshoot and diagnose assigned equipment problems and take corrective action within policy and procedure limitations.Knowledge of all regulatory standards pertaining to assigned responsibilities; i.e., State, OSHA, and NFPA regulations, etc.Must have knowledge of applicable Code of Federal Regulations. Coast Guard and ABS regulations if offshore.Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.Proficiency in the care and use of all site specific, facility and customer required Personal Protection Equipment (PPE). Trained in Respiratory Protection and fully certified to wear respiratory breathing equipment (Fit Tested).Must demonstrate ability to work in a team environment and willingness to assume additional or new responsibilities readily.Interpersonal Communications: Ability to read, write and comprehend English (operational, process, safety and quality instructions.) Ability to write routine reports and correspondence. Second language is a plus. Ability to speak effectively before groups of customers or employees of organization preferred. Contacts with immediate associates and immediate supervisor for instructions, training and guidance. Daily customer contact.Physical DemandsWhile performing the duties of this job, the employee is regularly required to stand; walk; and stoop, kneel, or crouch. Uses hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, and ability to adjust focus.Work EnvironmentShop and yard environment. May be frequently exposed to wet, humid, outside weather conditions and vibration. Works in some customer environments during later part of training. May be exposed to high pressure, chemicals, and shop traffic. The noise level in work environment is usually moderate.Complexity of Duties and Decisions: Performs a variety of manual functions. Follows established procedures to perform standardized tasks. Most errors are caught during self-inspection or by higher level staff before leaving work unit. Supervisor assures that the work is technically accurate and in compliance with instructions or established procedures.Authority: Works under direct supervision: Specific instructions are given on assignments or follows written or verbal instructions and established procedures and standard practice to perform assigned tasks. No direct reports but may assist less experienced.Total Safety is the world's premier provider of integrated safety and compliance services and the products necessary to support them, including gas detection, respiratory protection, safety training, fire protection, compliance and inspection, industrial hygiene, onsite emergency medical treatment/paramedics, communications systems, engineered systems design, and materials management. Our Core Values are People, Safety & Wellbeing, Accountability, Responsibility, Empowerment, Honesty, Transparency, and Integrity.Total Safety operates from 176 locations in 20 countries to ensure the safe Wellbeing of Workers Worldwide (W3).Total Safety is proud to be an Equal Opportunity Employer and will not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status or any other protected status.

System Design Engineer, Fluid SystemsThis is an extremely exciting start-up company who is working to raise living standards globally through a more affordable, secure, and environmentally friendly form of nuclear energy along with innovations in medical isotopes to improve human health. We are seeking a highly capable and motivated System Design Engineer who will focus on system design, analysis, systems engineering, and engineering oversight. In this role, you will act as a system design engineer for the company's advanced nuclear reactor projects. You will integrate and coordinate with engineers working on interfacing systems and to be a part of a high-performing team of engineers and scientists. What Will You Be Doing? Design of reliable and fault tolerant fluid systems from development of requirements through final design and commissioning. Develop maintenance plans for system hardware. Develop in-service inspection and in-service test plans for system hardware. Develop system level functional and performance requirements and flow requirements down to component specifications. Oversight of system construction planning and eventually construction, test, and startup. Review work of suppliers to determine compliance with requirements and minimize system level integration issues. Develop and review technical design documents, such as System Design Descriptions, Interface Control Documents, Engineering Design Specifications, etc. Generate design packages for system designs including coordinating of calculations, design reports, drawings, and specifications. Interface with the design team to create and manage drawing packages of system designs, including but not limited to Piping and Instrumentation Diagrams (P&IDs), 3D models, and system interface drawings. Interface with various design disciplines (such as mechanical, instrumentation and controls, civil, and nuclear) to identify and develop system design and performance criteria. Provide Support and oversight during test execution, evaluation of test results, and reporting of test results. What Will You Need to Be Successful in This Role? B.S. in Mechanical, Chemical, Nuclear Engineering, or related discipline from an accredited university and 5+ years direct experience with proven mechanical systems skills. Experience working with fluid systems, fluid components or piping! Experience working with suppliers on safety-related development projects. Experience with piping systems and the ability to read and draw P&IDs. Strong understanding of design codes (ASME, BPVC, API). Experience with power plant operations and maintenance. Familiar with safety classifications of systems, structures, and components. Familiar with piping design and analysis as well as familiar with fault detection and monitoring. Experience working to quality standards on design activities, such as ASME NQA-1, AS 9100, ISO 9001, or equivalent. The successful candidate will possess a high degree of trust and integrity, be able to communicate openly, and display respect and a desire to foster teamwork. Attention to detail and aspiration for technical excellence. Actual position starting level and title will be determined based on assessment of qualifications. This is a fully remote, full-time opportunity. Pay Rate is between $40.00 - $90.00 per hour. *Pay range offered to a successful candidate will be based on several factors, including the candidate's education, work experience, work location, specific job duties, certifications, etc.Qualified candidates should APPLY NOW for immediate consideration! Please hit APPLY to provide the required information, and we will be back in touch as soon as possible.Benefits: Volt offers benefits (based on eligibility) that include the following: health, dental, vision, term life, short term disability, AD&D, 401(k), Sick time, and other types of paid leaves (as required by law), Employee Assistance Program (EAP).Volt is an Equal Opportunity Employer and prohibits any kind of unlawful discrimination and harassment. Volt is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment on the basis of race, color, religion or belief, national origin, citizenship, social or ethnic origin, sex, age, physical or mental disability, veteran status, marital status, domestic partner status, sexual orientation, or any other status protected by the statutes, rules, and regulations in the locations where it operates. If you are an individual with a disability and need a reasonable accommodation to assist with your job search or application for employment, please click here or call (866) 898-0005. Please indicate the specifics of the assistance needed.Volt does not discriminate against applicants based on citizenship status, immigration status, or national origin, in accordance with 8 U.S.C. § 1324b. The company will consider for employment qualified applicants with arrest and conviction records in a manner that complies with the San Francisco Fair Chance Ordinance, the Los Angeles Fair Chance Initiative for Hiring Ordinance, and other applicable laws.Job ID : 415422

You deserve the job you loveVolt is immediately hiring for Business Support Specialist In Wilmington, Delaware. As a Business Support Specialist you will: You will join a successful team of Remote Technical Support Engineers and Scheduling Coordinators delivering day-to-day support services for Life Science and Chemical Analysis customers. Your primary role will be to support the Worldwide Remote Engineers and Scheduling teams through the implementation of a new, groundbreaking customer communication/ticket logging system & scheduling service. This is an excellent opportunity to work in a world-class organization as part of a high-profile project. Learn current support processes and tools (SAP based) for communication/ticket management Learn how the current processes work and what needs to adapt Perform testing of the new Customer Communication/Ticket Management (SAP based) tools May serve as a liaison between Information Technology, user groups and functional departments. Help deploy training for the support staff in upcoming releases Provide "on-the fly" support for functional application software and business processes during release phase Collaborate closely directly with customers when required Feedback status updates (challenges, successes, change requests, etc.) to the project team Support any subsequent rollouts and enhancement rollouts across the globe This is a full time contingent opportunity.The ideal candidate will have: Minimum Bachelor's Degree (all courses accepted, but preference for Chemistry, Life Sciences, STEM or Project Management based fields) Experience of operating in a laboratory and/or project management capacity desirable. Superb communication and people skills - able to communicate with stakeholders at all levels. Ability to work as part of a multicultural, cross-country team. Excellent time management skills. The ability to organize and prioritize your workload effectively. A strong valuation of processes and the ability to follow them accordingly with good attention to detail The ability to set customer expectations and balance customer requirements with business needs Pay Rate: $22.00 - $24.50 per hour *Pay range offered to a successful candidate will be based on several factors, including the candidate's education, work experience, work location, specific job duties, certifications, etc.Qualified candidates should APPLY NOW for immediate consideration! Please hit APPLY to provide the required information, and we will be back in touch as soon as possible.Benefits: Volt offers benefits (based on eligibility) that include the following: health, dental, vision, term life, short term disability, AD&D, 401(k), Sick time, and other types of paid leaves (as required by law), Employee Assistance Program (EAP).Volt is an Equal Opportunity Employer and prohibits any kind of unlawful discrimination and harassment. Volt is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment on the basis of race, color, religion or belief, national origin, citizenship, social or ethnic origin, sex, age, physical or mental disability, veteran status, marital status, domestic partner status, sexual orientation, or any other status protected by the statutes, rules, and regulations in the locations where it operates. If you are an individual with a disability and need a reasonable accommodation to assist with your job search or application for employment, please click here or call (866) 898-0005. Please indicate the specifics of the assistance needed.Volt does not discriminate against applicants based on citizenship status, immigration status, or national origin, in accordance with 8 U.S.C. § 1324b. The company will consider for employment qualified applicants with arrest and conviction records in a manner that complies with the San Francisco Fair Chance Ordinance, the Los Angeles Fair Chance Initiative for Hiring Ordinance, and other applicable laws. __PRESENT__PRESENTJob ID : 423989

System Design Engineer, Fluid SystemsThis is an extremely exciting start-up company who is working to raise living standards globally through a more affordable, secure, and environmentally friendly form of nuclear energy along with innovations in medical isotopes to improve human health. We are seeking a highly capable and motivated System Design Engineer who will focus on system design, analysis, systems engineering, and engineering oversight. In this role, you will act as a system design engineer for the company's advanced nuclear reactor projects. You will integrate and coordinate with engineers working on interfacing systems and to be a part of a high-performing team of engineers and scientists. What Will You Be Doing? Design of reliable and fault tolerant fluid systems from development of requirements through final design and commissioning. Perform technical trade studies and decisions to refine system design. Develop maintenance plans for system hardware. Develop in-service inspection and in-service test plans for system hardware. Develop system level functional and performance requirements and flow requirements down to component specifications. Oversight of system construction planning and eventually construction, test, and startup. Review work of suppliers to determine compliance with requirements and minimize system level integration issues. Develop and review technical design documents, such as System Design Descriptions, Interface Control Documents, Engineering Design Specifications, etc. Generate design packages for system designs including coordinating of calculations, design reports, drawings, and specifications. Interface with the design team to create and manage drawing packages of system designs, including but not limited to Piping and Instrumentation Diagrams (P&IDs), 3D models, and system interface drawings. Interface with various design disciplines (such as mechanical, instrumentation and controls, civil, and nuclear) to identify and develop system design and performance criteria. Provide Support and oversight during test execution, evaluation of test results, and reporting of test results. What Will You Need to Be Successful in This Role? B.S. in Mechanical, Chemical, Nuclear Engineering, or related discipline from an accredited university and 5+ years direct experience with proven mechanical systems skills. Experience working with fluid systems or fluid components or piping. Experience working with suppliers on safety-related projects. Experience with piping systems and the ability to read and draw P&IDs. Strong understanding of design codes (ASME, BPVC, API). Experience with power plant operations and maintenance. Familiar with safety classifications of systems, structures, and components. Familiar with piping design and analysis as well as familiar with fault detection and monitoring. Experience working to quality standards on design activities, such as ASME NQA-1, AS 9100, ISO 9001, or equivalent. The successful candidate will possess a high degree of trust and integrity, be able to communicate openly, and display respect and a desire to foster teamwork. Attention to detail and aspiration for technical excellence. Actual position starting level and title will be determined based on assessment of qualifications. This is a fully remote, full-time opportunity. Pay Rate is between $40.00 - $90.00 per hour. *Pay range offered to a successful candidate will be based on several factors, including the candidate's education, work experience, work location, specific job duties, certifications, etc.Qualified candidates should APPLY NOW for immediate consideration! Please hit APPLY to provide the required information, and we will be back in touch as soon as possible.Benefits: Volt offers benefits (based on eligibility) that include the following: health, dental, vision, term life, short term disability, AD&D, 401(k), Sick time, and other types of paid leaves (as required by law), Employee Assistance Program (EAP).Volt is an Equal Opportunity Employer and prohibits any kind of unlawful discrimination and harassment. Volt is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment on the basis of race, color, religion or belief, national origin, citizenship, social or ethnic origin, sex, age, physical or mental disability, veteran status, marital status, domestic partner status, sexual orientation, or any other status protected by the statutes, rules, and regulations in the locations where it operates. If you are an individual with a disability and need a reasonable accommodation to assist with your job search or application for employment, please click here or call (866) 898-0005. Please indicate the specifics of the assistance needed.Volt does not discriminate against applicants based on citizenship status, immigration status, or national origin, in accordance with 8 U.S.C. § 1324b. The company will consider for employment qualified applicants with arrest and conviction records in a manner that complies with the San Francisco Fair Chance Ordinance, the Los Angeles Fair Chance Initiative for Hiring Ordinance, and other applicable laws.Job ID : 415420