Operating Engineer Salary in USA

Job Title Operating Engineer Job Description Summary Responsible to ensure the efficient operation and maintenance of mechanical, electrical and plumbing equipment and systems for the assigned property(s). Responsibilities include (but are not limited to) maintaining a clean and safe working environment, performing rounds, conducting routine assessments, performance of day-to-day preventive and corrective maintenance, painting, and housekeeping for assigned properties Job Description ESSENTIAL FUNCTIONS AND RESPONSIBILITIES• Perform all plumbing, electrical, or HVAC requirements of the building(s)• Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc.• Monitor and adjust all mechanical/pneumatic equipment, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings• Verify field conditions and perform any necessary repairs or adjustments• Monitor Energy Management• Repair doors, ceilings, hand railings, and floors and other general repairs, adjustments and installations about the property• Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories, etc.)• Perform preventive maintenance duties in accordance with C&W standards, building protocol, manufacturer recommendations and industry best practices. including changing filters, cleaning coils, flushing condensers, punching tubes, greasing fan, pump and motor bearings as required, inspecting and adjusting belts, replacing motor bearings, aligning pulleys and shafts, monitor condenser, chilled, heating and secondary water chemical treatment and its associated feed equipment, clean and maintain cooling towers, and perform annual inspections and other scheduled routines as directed.• Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps. Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of obstructions and debris• Check for properly operating emergency exit signs and lights and ensure free and clear access to emergency stairs and exits. Perform additional fire and life safety inspections as per NFPA and local jurisdiction, C&W standards, building protocol and as directed by superiors and property management• Document and report activities to supervisor• Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns• Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits• Complete all required C&W Safety Training as scheduled annually• Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hoursKEY COMPETENCIES• Technical Proficiency• Initiative• Flexibility• Multi-Tasking• Sense of UrgencyIMPORTANT EDUCATION• High School Diploma of GED Equivalent• Graduate of apprentice program or trade school preferredIMPORTANT EXPERIENCE• 5+ years of related work experience in operating mechanical, electrical, and plumbing systems in a commercial property settingADDITIONAL ELIGIBILITY QUALIFICATIONS• Appropriate license/permit for trade as may be required, i.e. Journeyman or Master Electrician License or City Licenses, such as Refrigeration Certificate of Fitness, High Pressure Boiler License, High Pressure Steam Operator, etc.)• May be required to have certification as a Universal Technician for CFC's depending on market licensure requirements• Possess and maintain a valid driver's license and good driving record with periodic checks (where applicable)• Basic Computing Skills in Outlook, Excel & Word• Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc.• Knowledgeable in energy management systems, techniques and operations.• Thorough knowledge in all building systems operations, maintenance and repair.May be only maintenance staff member on duty during certain shifts; may be required to work extended periods of time without relief when responding to priority/emergency situations (including overtime type assignments); may require shift work and/or on call dutiesWORK ENVIRONMENTThis job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Regularly required to travel outside between properties in varying weather conditions.PHYSICAL DEMANDSThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.• Must have ability to stoop, stand, climb, frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices• Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine• Involves movement between departments, floors, and properties to facilitate work• Ability to speak clearly so others can understand you• Ability to read and understand information presented orally and in writing• Regularly required to utilize vision abilities, allowing reading of printed material, drawings, and schematicsAAP/EEO STATEMENTC&W provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Further, the company takes affirmative action to ensure that applicants are employed and employees during employment are treated without regard to any of these characteristics. Discrimination of any type will not be tolerated.OTHER DUTIESThis job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice.Cushman & Wakefield provides equal employment opportunity. Discrimination of any type will not be tolerated. Cushman & Wakefield is an Equal Opportunity / Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or any other characteristic protected by state, federal, or local law.In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or email [email protected] . Please refer to the job title and job location when you contact us.

Job Title Operating Engineer Job Description Summary Responsible to ensure the efficient operation and maintenance of mechanical, electrical and plumbing equipment and systems for the assigned property(s). Responsibilities include (but are not limited to) maintaining a clean and safe working environment, performing rounds, conducting routine assessments, performance of day-to-day preventive and corrective maintenance, painting, and housekeeping for assigned properties. Job Description • Perform all plumbing, electrical, or HVAC requirements of the building(s)• Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc.• Monitor and adjust all mechanical/pneumatic equipment, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings• Verify field conditions and perform any necessary repairs or adjustments• Monitor Energy Management• Repair doors, ceilings, hand railings, and floors and other general repairs, adjustments and installations about the property• Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories, etc.)• Perform preventive maintenance duties in accordance with C&W standards, building protocol, manufacturer recommendations and industry best practices. including changing filters, cleaning coils, flushing condensers, punching tubes, greasing fan, pump and motor bearings as required, inspecting and adjusting belts, replacing motor bearings, aligning pulleys and shafts, monitor condenser, chilled, heating and secondary water chemical treatment and its associated feed equipment, clean and maintain cooling towers, and perform annual inspections and other scheduled routines as directed.• Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps. Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of obstructions and debris• Check for properly operating emergency exit signs and lights and ensure free and clear access to emergency stairs and exits. Perform additional fire and life safety inspections as per NFPA and local jurisdiction, C&W standards, building protocol and as directed by superiors and property management• Document and report activities to supervisor• Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns• Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits• Complete all required C&W Safety Training as scheduled annually• Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hoursKEY COMPETENCIES• Technical Proficiency• Initiative• Flexibility• Multi-Tasking• Sense of UrgencyIMPORTANT EDUCATION• High School Diploma of GED Equivalent• Graduate of apprentice program or trade school preferredIMPORTANT EXPERIENCE• 5+ years of related work experience in operating mechanical, electrical, and plumbing systems in a commercial property settingADDITIONAL ELIGIBILITY QUALIFICATIONS• Appropriate license/permit for trade as may be required, i.e. Journeyman or Master Electrician License or City Licenses, such as Refrigeration Certificate of Fitness, High Pressure Boiler License, High Pressure Steam Operator, etc.)• May be required to have certification as a Universal Technician for CFC's depending on market licensure requirements• Possess and maintain a valid driver's license and good driving record with periodic checks (where applicable)• Basic Computing Skills in Outlook, Excel & Word• Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc.• Knowledgeable in energy management systems, techniques and operations.• Thorough knowledge in all building systems operations, maintenance and repair.May be only maintenance staff member on duty during certain shifts; may be required to work extended periods of time without relief when responding to priority/emergency situations (including overtime type assignments); may require shift work and/or on call dutiesWORK ENVIRONMENTThis job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Regularly required to travel outside between properties in varying weather conditions.PHYSICAL DEMANDSThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.• Must have ability to stoop, stand, climb, frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices• Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine• Involves movement between departments, floors, and properties to facilitate work• Ability to speak clearly so others can understand you• Ability to read and understand information presented orally and in writing• Regularly required to utilize vision abilities, allowing reading of printed material, drawings, and schematicsAAP/EEO STATEMENTC&W provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Further, the company takes affirmative action to ensure that applicants are employed and employees during employment are treated without regard to any of these characteristics. Discrimination of any type will not be tolerated.OTHER DUTIESThis job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice.Cushman & Wakefield provides equal employment opportunity. Discrimination of any type will not be tolerated. Cushman & Wakefield is an Equal Opportunity / Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or any other characteristic protected by state, federal, or local law.In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or email [email protected] . Please refer to the job title and job location when you contact us.

Job Title Operating Engineer Job Description Summary Responsible to ensure the efficient operation and maintenance of mechanical, electrical and plumbing equipment and systems for the assigned property(s). Responsibilities include (but are not limited to) maintaining a clean and safe working environment, performing rounds, conducting routine assessments, performance of day-to-day preventive and corrective maintenance, painting, and housekeeping for assigned properties Job Description ESSENTIAL FUNCTIONS AND RESPONSIBILITIES:• Perform all plumbing, electrical, or HVAC requirements of the building(s)• Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc.• Monitor and adjust all mechanical/pneumatic equipment, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings• Verify field conditions and perform any necessary repairs or adjustments• Monitor Energy Management• Repair doors, ceilings, hand railings, and floors and other general repairs, adjustments and installations about the property• Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories, etc.)• Perform preventive maintenance duties in accordance with C&W standards, building protocol, manufacturer recommendations and industry best practices. including changing filters, cleaning coils, flushing condensers, punching tubes, greasing fan, pump and motor bearings as required, inspecting and adjusting belts, replacing motor bearings, aligning pulleys and shafts, monitor condenser, chilled, heating and secondary water chemical treatment and its associated feed equipment, clean and maintain cooling towers, and perform annual inspections and other scheduled routines as directed• Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps. Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of obstructions and debris• Check for properly operating emergency exit signs and lights and ensure free and clear access to emergency stairs and exits. Perform additional fire and life safety inspections as per NFPA and local jurisdiction, C&W standards, building protocol and as directed by superiors and property management• Document and report activities to supervisor• Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns• Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits• Complete all required C&W Safety Training as scheduled annually• Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hoursKEY COMPETENCIES:• Technical Proficiency• Initiative• Flexibility• Multi-Tasking• Sense of UrgencyIMPORTANT EDUCATION:• High School Diploma of GED Equivalent• Graduate of apprentice program or trade school preferredIMPORTANT EXPERIENCE:• 5+ years of related work experience in operating mechanical, electrical, and plumbing systems in a commercial property settingADDITIONAL ELIGIBILITY QUALIFICATIONS:• Appropriate license/permit for trade as may be required, i.e. Journeyman or Master Electrician License or City Licenses, such as Refrigeration Certificate of Fitness, High Pressure Boiler License, High Pressure Steam Operator, etc.)• May be required to have certification as a Universal Technician for CFC's depending on market licensure requirements• Possess and maintain a valid driver's license and good driving record with periodic checks (where applicable)• Basic Computing Skills in Outlook, Excel & Word• Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc.• Knowledgeable in energy management systems, techniques and operations.• Thorough knowledge in all building systems operations, maintenance and repair.May be only maintenance staff member on duty during certain shifts; may be required to work extended periods of time without relief when responding to priority/emergency situations (including overtime type assignments); may require shift work and/or on call dutiesWORK ENVIRONMENT:This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Regularly required to travel outside between properties in varying weather conditions.PHYSICAL DEMANDS:The ability to observe details at close range (within a few feet of the observer)Problem Sensitivity - The ability to tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing that there is a problemControl Precision - The ability to quickly and repeatedly adjust the controls of a machine or a vehicle to exact positionsManual Dexterity - The ability to quickly grasp, manipulate, or assemble objectsSubstantial lifting (up to 50 pounds) is requiredAbility to stand and walk for extended or continuous periods of timeAbility to quickly bend, stretch, twist, or reach outAbility to ascend and descend staircases, ladders, and/or step stoolsAbility to operate applicable hand tools, power tools, and equipmentCommunication/ Expression -The ability to communicate information and ideas so others will understandDeductive Reasoning - The ability to apply general rules to specific problems to produce answers that make senseInformation Ordering - The ability to arrange things or actions in a certain order or pattern according to a specific rule or set of rules (e.g., patterns of numbers, letters, words, pictures, mathematical operations).Cushman & Wakefield provides equal employment opportunity. Discrimination of any type will not be tolerated. Cushman & Wakefield is an Equal Opportunity / Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or any other characteristic protected by state, federal, or local law.In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or email [email protected] . Please refer to the job title and job location when you contact us.

Job Title Operating Engineer Job Description Summary Responsible to ensure the efficient operation and maintenance of mechanical, electrical and plumbing equipment and systems for the assigned property(s). Responsibilities include (but are not limited to) maintaining a clean and safe working environment, performing rounds, conducting routine assessments, performance of day-to-day preventive and corrective maintenance, painting, and housekeeping for assigned properties Job Description [Please delete this section before finalizing the Job Requisition: Below is an example Job Description for this Job Profile, and may need to be updated to reflect the specific responsibilities of this role. Please also ensure that you validate the selection of the Job Profile and placement of this Position in the Job Architecture before finalizing.]\n\nESSENTIAL FUNCTIONS AND RESPONSIBILITIES\n• Perform all plumbing, electrical, or HVAC requirements of the building(s)\n• Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc.\n• Monitor and adjust all mechanical/pneumatic equipment, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings\n• Verify field conditions and perform any necessary repairs or adjustments\n• Monitor Energy Management\n• Repair doors, ceilings, hand railings, and floors and other general repairs, adjustments and installations about the property\n• Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories, etc.)\n• Perform preventive maintenance duties in accordance with C&W standards, building protocol, manufacturer recommendations and industry best practices. including changing filters, cleaning coils, flushing condensers, punching tubes, greasing fan, pump and motor bearings as required, inspecting and adjusting belts, replacing motor bearings, aligning pulleys and shafts, monitor condenser, chilled, heating and secondary water chemical treatment and its associated feed equipment, clean and maintain cooling towers, and perform annual inspections and other scheduled routines as directed. \n• Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps. Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of obstructions and debris\n• Check for properly operating emergency exit signs and lights and ensure free and clear access to emergency stairs and exits. Perform additional fire and life safety inspections as per NFPA and local jurisdiction, C&W standards, building protocol and as directed by superiors and property management\n• Document and report activities to supervisor\n• Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns\n• Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits\n• Complete all required C&W Safety Training as scheduled annually\n• Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hours\nKEY COMPETENCIES \n• Technical Proficiency\n• Initiative\n• Flexibility\n• Multi-Tasking\n• Sense of Urgency\nIMPORTANT EDUCATION \n• High School Diploma of GED Equivalent\n• Graduate of apprentice program or trade school preferred\nIMPORTANT EXPERIENCE\n• 5+ years of related work experience in operating mechanical, electrical, and plumbing systems in a commercial property setting \nADDITIONAL ELIGIBILITY QUALIFICATIONS\n• Appropriate license/permit for trade as may be required, i.e. Journeyman or Master Electrician License or City Licenses, such as Refrigeration Certificate of Fitness, High Pressure Boiler License, High Pressure Steam Operator, etc.) \n• May be required to have certification as a Universal Technician for CFC's depending on market licensure requirements\n• Possess and maintain a valid driver's license and good driving record with periodic checks (where applicable)\n• Basic Computing Skills in Outlook, Excel & Word\n• Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc. \n• Knowledgeable in energy management systems, techniques and operations. \n• Thorough knowledge in all building systems operations, maintenance and repair.\nMay be only maintenance staff member on duty during certain shifts; may be required to work extended periods of time without relief when responding to priority/emergency situations (including overtime type assignments); may require shift work and/or on call duties\nWORK ENVIRONMENT\nThis job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Regularly required to travel outside between properties in varying weather conditions.\nPHYSICAL DEMANDS\nThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. \n• Must have ability to stoop, stand, climb, frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices\n• Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine\n• Involves movement between departments, floors, and properties to facilitate work\n• Ability to speak clearly so others can understand you\n• Ability to read and understand information presented orally and in writing\n• Regularly required to utilize vision abilities, allowing reading of printed material, drawings, and schematics\nAAP/EEO STATEMENT\nC&W provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Further, the company takes affirmative action to ensure that applicants are employed and employees during employment are treated without regard to any of these characteristics. Discrimination of any type will not be tolerated.\nOTHER DUTIES\nThis job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice.Cushman & Wakefield provides equal employment opportunity. Discrimination of any type will not be tolerated. Cushman & Wakefield is an Equal Opportunity / Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or any other characteristic protected by state, federal, or local law.In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or email [email protected] . Please refer to the job title and job location when you contact us.

Job Title Operating Engineer Job Description Summary Responsible to ensure the efficient operation and maintenance of mechanical, electrical and plumbing equipment and systems for the assigned property(s). Responsibilities include (but are not limited to) maintaining a clean and safe working environment, performing rounds, conducting routine assessments, performance of day-to-day preventive and corrective maintenance, painting, and housekeeping for assigned properties Job Description ESSENTIAL FUNCTIONS AND RESPONSIBILITIES• Perform all plumbing, electrical, or HVAC requirements of the building(s)• Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc.• Monitor and adjust all mechanical/pneumatic equipment, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings• Verify field conditions and perform any necessary repairs or adjustments• Monitor Energy Management• Repair doors, ceilings, hand railings, and floors and other general repairs, adjustments and installations about the property• Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories, etc.)• Perform preventive maintenance duties in accordance with C&W standards, building protocol, manufacturer recommendations and industry best practices. including changing filters, cleaning coils, flushing condensers, punching tubes, greasing fan, pump and motor bearings as required, inspecting and adjusting belts, replacing motor bearings, aligning pulleys and shafts, monitor condenser, chilled, heating and secondary water chemical treatment and its associated feed equipment, clean and maintain cooling towers, and perform annual inspections and other scheduled routines as directed.• Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps. Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of obstructions and debris• Check for properly operating emergency exit signs and lights and ensure free and clear access to emergency stairs and exits. Perform additional fire and life safety inspections as per NFPA and local jurisdiction, C&W standards, building protocol and as directed by superiors and property management• Document and report activities to supervisor• Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns• Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits• Complete all required C&W Safety Training as scheduled annually• Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hoursKEY COMPETENCIES• Technical Proficiency• Initiative• Flexibility• Multi-Tasking• Sense of UrgencyIMPORTANT EDUCATION• High School Diploma of GED Equivalent• Graduate of apprentice program or trade school preferredIMPORTANT EXPERIENCE• 5+ years of related work experience in operating mechanical, electrical, and plumbing systems in a commercial property settingADDITIONAL ELIGIBILITY QUALIFICATIONS• Appropriate license/permit for trade as may be required, i.e. Journeyman or Master Electrician License or City Licenses, such as Refrigeration Certificate of Fitness, High Pressure Boiler License, High Pressure Steam Operator, etc.)• May be required to have certification as a Universal Technician for CFC's depending on market licensure requirements• Possess and maintain a valid driver's license and good driving record with periodic checks (where applicable)• Basic Computing Skills in Outlook, Excel & Word• Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc.• Knowledgeable in energy management systems, techniques and operations.• Thorough knowledge in all building systems operations, maintenance and repair.May be only maintenance staff member on duty during certain shifts; may be required to work extended periods of time without relief when responding to priority/emergency situations (including overtime type assignments); may require shift work and/or on call dutiesWORK ENVIRONMENTThis job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Regularly required to travel outside between properties in varying weather conditions.PHYSICAL DEMANDSThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.• Must have ability to stoop, stand, climb, frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices• Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine• Involves movement between departments, floors, and properties to facilitate work• Ability to speak clearly so others can understand you• Ability to read and understand information presented orally and in writing• Regularly required to utilize vision abilities, allowing reading of printed material, drawings, and schematicsAAP/EEO STATEMENTC&W provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Further, the company takes affirmative action to ensure that applicants are employed and employees during employment are treated without regard to any of these characteristics. Discrimination of any type will not be tolerated.OTHER DUTIESThis job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice.#INDSkilledTradCushman & Wakefield provides equal employment opportunity. Discrimination of any type will not be tolerated. Cushman & Wakefield is an Equal Opportunity / Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or any other characteristic protected by state, federal, or local law.In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or email [email protected] . Please refer to the job title and job location when you contact us.

Job Title Operating Engineer Job Description Summary Responsible to ensure the proper efficient operations and maintenance of the mechanical electrical and plumbing systems for the assigned facility. The performance of all necessary maintenance and operational tasks are developed to assure maximum life and reliability of all mechanical/ electrical/plumbing systems. Typically, this position does not have a Chief Engineer on-site at the building and is sometimes the solo engineer at the building. This position may also include the supervision of maintenance staff at the building depending on the size and complexity of the assignment. Job Description • Assist with or conduct the daily operations and maintenance of the mechanical, electrical and plumbing systems and general maintenance requirements for the buildings• Supervise maintenance staff when applicable and assign, and monitor maintenance activities and projects• Perform preventive maintenance duties, including changing filters, lubricating motors, replacing lamps, ballasts and fixtures, Inspecting and adjusting belts, replacing motor bearings, aligning shafts, and other inspections and maintenance recommended by equipment manufacturers• Recommend improvements to the preventive maintenance program on an ongoing basis• Develop and maintain effective building-specific maintenance procedures• Coordinate maintenance efforts with outside contractors and technicians• Maintain stock and inventory control• Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns• Comply with all applicable codes, regulations, governmental agency, and company directives as related to building operations and practice safe work habits• Ensure management team is informed of current building operations by compiling and submitting monthly reports• Complete all required C&W Safety Training as scheduled annually.• Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hoursKEY COMPETENCIES• Communication Proficiency (oral and written)• Organization Skills• Technical Proficiency• Decision Making• Problem Solving/AnalysisIMPORTANT EDUCATION• High School Diploma or GED Equivalent• Graduate of apprentice program or trade school preferredIMPORTANT EXPERIENCE• 5+ years of related trade experience in operating mechanical, electrical and plumbing systems in a commercial property settingADDITIONAL ELIGIBILITY QUALIFICATIONS• Appropriate license/permit for trade as may be required, i.e. Journeyman or Master Electrician License, City Licenses, Operators License, Steam Engineers License, etc.• Possess a valid "Universal" level certification for CFC and HFC based refrigerants (EPA Section 608); to service, repair, or dispose of equipment that could release ozone depleting refrigerants to the atmosphere or any similar combination of education and experience• Possess and maintain a valid driver's license and good driving record with periodic checks• Basic Computing Skills in Outlook, Excel & Word• Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc.• Knowledgeable in energy management systems, techniques and operations.• Thorough knowledge in all building systems operations, maintenance and repairMay be only maintenance staff member on duty during certain shifts; may be required to work extended periods of time without relief when responding to priority/emergency situations (including overtime type assignments); may require shift work and/or on call dutiesWORK ENVIRONMENTThis job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Regularly required to travel outside between properties in varying weather conditions.PHYSICAL DEMANDSThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.• Must have ability to stoop, stand, climb, frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices• Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine• Involves movement between departments, floors, and properties to facilitate work• Ability to speak clearly so others can understand you• Ability to read and understand information presented orally and in writing• Regularly required to utilize vision abilities, allowing reading of printed material, drawings, and schematicsAAP/EEO STATEMENTC&W provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Further, the company takes affirmative action to ensure that applicants are employed and employees during employment are treated without regard to any of these characteristics. Discrimination of any type will not be tolerated.OTHER DUTIESThis job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice.Cushman & Wakefield provides equal employment opportunity. Discrimination of any type will not be tolerated. Cushman & Wakefield is an Equal Opportunity / Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or any other characteristic protected by state, federal, or local law.In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or email [email protected] . Please refer to the job title and job location when you contact us.

Job Title Operating Engineer Job Description Summary Responsible to ensure the proper efficient operations and maintenance of the mechanical electrical and plumbing systems for the assigned facility. The performance of all necessary maintenance and operational tasks are developed to assure maximum life and reliability of all mechanical/ electrical/plumbing systems. Typically, this position does not have a Chief Engineer on-site at the building and is sometimes the solo engineer at the building. This position may also include the supervision of maintenance staff at the building depending on the size and complexity of the assignment. Job Description ESSENTIAL FUNCTIONS AND RESPONSIBILITIES• Assist with or conduct the daily operations and maintenance of the mechanical, electrical and plumbing systems and general maintenance requirements for the buildings• Supervise maintenance staff when applicable and assign, and monitor maintenance activities and projects• Perform preventive maintenance duties, including changing filters, lubricating motors, replacing lamps, ballasts and fixtures, Inspecting and adjusting belts, replacing motor bearings, aligning shafts, and other inspections and maintenance recommended by equipment manufacturers• Recommend improvements to the preventive maintenance program on an ongoing basis• Develop and maintain effective building-specific maintenance procedures• Coordinate maintenance efforts with outside contractors and technicians• Maintain stock and inventory control• Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns• Comply with all applicable codes, regulations, governmental agency, and company directives as related to building operations and practice safe work habits• Ensure management team is informed of current building operations by compiling and submitting monthly reports• Complete all required C&W Safety Training as scheduled annually.• Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hoursKEY COMPETENCIES• Communication Proficiency (oral and written)• Organization Skills• Technical Proficiency• Decision Making• Problem Solving/AnalysisIMPORTANT EDUCATION• High School Diploma or GED Equivalent• Graduate of apprentice program or trade school preferredIMPORTANT EXPERIENCE• 5+ years of related trade experience in operating mechanical, electrical and plumbing systems in a commercial property settingADDITIONAL ELIGIBILITY QUALIFICATIONS• Appropriate license/permit for trade as may be required, i.e. Journeyman or Master Electrician License, City Licenses, Operators License, Steam Engineers License, etc.• Possess a valid "Universal" level certification for CFC and HFC based refrigerants (EPA Section 608); to service, repair, or dispose of equipment that could release ozone depleting refrigerants to the atmosphere or any similar combination of education and experience• Possess and maintain a valid driver's license and good driving record with periodic checks• Basic Computing Skills in Outlook, Excel & Word• Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc.• Knowledgeable in energy management systems, techniques and operations.• Thorough knowledge in all building systems operations, maintenance and repairMay be only maintenance staff member on duty during certain shifts; may be required to work extended periods of time without relief when responding to priority/emergency situations (including overtime type assignments); may require shift work and/or on call dutiesWORK ENVIRONMENTThis job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Regularly required to travel outside between properties in varying weather conditions.PHYSICAL DEMANDSThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.• Must have ability to stoop, stand, climb, frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices• Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine• Involves movement between departments, floors, and properties to facilitate work• Ability to speak clearly so others can understand you• Ability to read and understand information presented orally and in writing• Regularly required to utilize vision abilities, allowing reading of printed material, drawings, and schematicsAAP/EEO STATEMENTC&W provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Further, the company takes affirmative action to ensure that applicants are employed and employees during employment are treated without regard to any of these characteristics. Discrimination of any type will not be tolerated.OTHER DUTIESThis job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice.Cushman & Wakefield also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health, vision, and dental insurance, flexible spending accounts, health savings accounts, retirement savings plans, life, and disability insurance programs, and paid and unpaid time away from work. In addition to a comprehensive benefits package, Cushman and Wakefield provide eligible employees with competitive pay, which may vary depending on eligibility factors such as geographic location, date of hire, total hours worked, job type, business line, and applicability of collective bargaining agreements.The compensation that will be offered to the successful candidate will depend on factors such as whether the position is covered by a collective bargaining agreement, the geographic area in which the work will be performed, market pay rates in that area, and the candidate's experience and qualifications.The company will not pay less than minimum wage for this role.The compensation for the position is: $56.44 - $56.44Cushman & Wakefield provides equal employment opportunity. Discrimination of any type will not be tolerated. Cushman & Wakefield is an Equal Opportunity / Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or any other characteristic protected by state, federal, or local law.In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or email [email protected] . Please refer to the job title and job location when you contact us.

Job Title Operating Engineer Job Description Summary Responsible to ensure the efficient operation and maintenance of mechanical, electrical and plumbing equipment and systems for the assigned property(s). Responsibilities include (but are not limited to) maintaining a clean and safe working environment, performing rounds, conducting routine assessments, performance of day-to-day preventive and corrective maintenance, painting, and housekeeping for assigned properties Job Description ESSENTIAL FUNCTIONS AND RESPONSIBILITIES• Perform all plumbing, electrical, or HVAC requirements of the building(s)• Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc.• Monitor and adjust all mechanical/pneumatic equipment, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings• Verify field conditions and perform any necessary repairs or adjustments• Monitor Energy Management• Repair doors, ceilings, hand railings, and floors and other general repairs, adjustments and installations about the property• Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories, etc.)• Perform preventive maintenance duties in accordance with C&W standards, building protocol, manufacturer recommendations and industry best practices. including changing filters, cleaning coils, flushing condensers, punching tubes, greasing fan, pump and motor bearings as required, inspecting and adjusting belts, replacing motor bearings, aligning pulleys and shafts, monitor condenser, chilled, heating and secondary water chemical treatment and its associated feed equipment, clean and maintain cooling towers, and perform annual inspections and other scheduled routines as directed.• Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps. Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of obstructions and debris• Check for properly operating emergency exit signs and lights and ensure free and clear access to emergency stairs and exits. Perform additional fire and life safety inspections as per NFPA and local jurisdiction, C&W standards, building protocol and as directed by superiors and property management• Document and report activities to supervisor• Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns• Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits• Complete all required C&W Safety Training as scheduled annually• Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hoursKEY COMPETENCIES• Technical Proficiency• Initiative• Flexibility• Multi-Tasking• Sense of UrgencyIMPORTANT EDUCATION• High School Diploma of GED Equivalent• Graduate of apprentice program or trade school preferredIMPORTANT EXPERIENCE• 5+ years of related work experience in operating mechanical, electrical, and plumbing systems in a commercial property settingADDITIONAL ELIGIBILITY QUALIFICATIONS• Appropriate license/permit for trade as may be required, i.e. Journeyman or Master Electrician License or City Licenses, such as Refrigeration Certificate of Fitness, High Pressure Boiler License, High Pressure Steam Operator, etc.)• May be required to have certification as a Universal Technician for CFC's depending on market licensure requirements• Possess and maintain a valid driver's license and good driving record with periodic checks (where applicable)• Basic Computing Skills in Outlook, Excel & Word• Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc.• Knowledgeable in energy management systems, techniques and operations.• Thorough knowledge in all building systems operations, maintenance and repair.May be only maintenance staff member on duty during certain shifts; may be required to work extended periods of time without relief when responding to priority/emergency situations (including overtime type assignments); may require shift work and/or on call dutiesWORK ENVIRONMENTThis job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Regularly required to travel outside between properties in varying weather conditions.PHYSICAL DEMANDSThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.• Must have ability to stoop, stand, climb, frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices• Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine• Involves movement between departments, floors, and properties to facilitate work• Ability to speak clearly so others can understand you• Ability to read and understand information presented orally and in writing• Regularly required to utilize vision abilities, allowing reading of printed material, drawings, and schematicsAAP/EEO STATEMENTC&W provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Further, the company takes affirmative action to ensure that applicants are employed and employees during employment are treated without regard to any of these characteristics. Discrimination of any type will not be tolerated.OTHER DUTIESThis job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice.Cushman & Wakefield provides equal employment opportunity. Discrimination of any type will not be tolerated. Cushman & Wakefield is an Equal Opportunity / Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or any other characteristic protected by state, federal, or local law.In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or email [email protected] . Please refer to the job title and job location when you contact us.

Job Title Operating Engineer Job Description Summary Responsible to ensure the efficient operation and maintenance of mechanical, electrical and plumbing equipment and systems for the assigned property(s). Responsibilities include (but are not limited to) maintaining a clean and safe working environment, performing rounds, conducting routine assessments, performance of day-to-day preventive and corrective maintenance, painting, and housekeeping for assigned properties Job Description [Please delete this section before finalizing the Job Requisition: Below is an example Job Description for this Job Profile, and may need to be updated to reflect the specific responsibilities of this role. Please also ensure that you validate the selection of the Job Profile and placement of this Position in the Job Architecture before finalizing.]ESSENTIAL FUNCTIONS AND RESPONSIBILITIES• Perform all plumbing, electrical, or HVAC requirements of the building(s)• Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc.• Monitor and adjust all mechanical/pneumatic equipment, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings• Verify field conditions and perform any necessary repairs or adjustments• Monitor Energy Management• Repair doors, ceilings, hand railings, and floors and other general repairs, adjustments and installations about the property• Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories, etc.)• Perform preventive maintenance duties in accordance with C&W standards, building protocol, manufacturer recommendations and industry best practices. including changing filters, cleaning coils, flushing condensers, punching tubes, greasing fan, pump and motor bearings as required, inspecting and adjusting belts, replacing motor bearings, aligning pulleys and shafts, monitor condenser, chilled, heating and secondary water chemical treatment and its associated feed equipment, clean and maintain cooling towers, and perform annual inspections and other scheduled routines as directed.• Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps. Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of obstructions and debris• Check for properly operating emergency exit signs and lights and ensure free and clear access to emergency stairs and exits. Perform additional fire and life safety inspections as per NFPA and local jurisdiction, C&W standards, building protocol and as directed by superiors and property management• Document and report activities to supervisor• Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns• Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits• Complete all required C&W Safety Training as scheduled annually• Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hoursKEY COMPETENCIES• Technical Proficiency• Initiative• Flexibility• Multi-Tasking• Sense of UrgencyIMPORTANT EDUCATION• High School Diploma of GED Equivalent• Graduate of apprentice program or trade school preferredIMPORTANT EXPERIENCE• 5+ years of related work experience in operating mechanical, electrical, and plumbing systems in a commercial property settingADDITIONAL ELIGIBILITY QUALIFICATIONS• Appropriate license/permit for trade as may be required, i.e. Journeyman or Master Electrician License or City Licenses, such as Refrigeration Certificate of Fitness, High Pressure Boiler License, High Pressure Steam Operator, etc.)• May be required to have certification as a Universal Technician for CFC's depending on market licensure requirements• Possess and maintain a valid driver's license and good driving record with periodic checks (where applicable)• Basic Computing Skills in Outlook, Excel & Word• Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc.• Knowledgeable in energy management systems, techniques and operations.• Thorough knowledge in all building systems operations, maintenance and repair.May be only maintenance staff member on duty during certain shifts; may be required to work extended periods of time without relief when responding to priority/emergency situations (including overtime type assignments); may require shift work and/or on call dutiesWORK ENVIRONMENTThis job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Regularly required to travel outside between properties in varying weather conditions.PHYSICAL DEMANDSThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.• Must have ability to stoop, stand, climb, frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices• Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine• Involves movement between departments, floors, and properties to facilitate work• Ability to speak clearly so others can understand you• Ability to read and understand information presented orally and in writing• Regularly required to utilize vision abilities, allowing reading of printed material, drawings, and schematicsAAP/EEO STATEMENTC&W provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Further, the company takes affirmative action to ensure that applicants are employed and employees during employment are treated without regard to any of these characteristics. Discrimination of any type will not be tolerated.OTHER DUTIESThis job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice.Cushman & Wakefield provides equal employment opportunity. Discrimination of any type will not be tolerated. Cushman & Wakefield is an Equal Opportunity / Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or any other characteristic protected by state, federal, or local law.In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or email [email protected] . Please refer to the job title and job location when you contact us.

Job Title Operating Engineer Job Description Summary Responsible to ensure the efficient operation and maintenance of mechanical, electrical and plumbing equipment and systems for the assigned property(s). Responsibilities include (but are not limited to) maintaining a clean and safe working environment, performing rounds, conducting routine assessments, performance of day-to-day preventive and corrective maintenance, painting, and housekeeping for assigned properties Job Description ESSENTIAL FUNCTIONS AND RESPONSIBILITIES• Perform all plumbing, electrical, or HVAC requirements of the building(s)• Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc.• Monitor and adjust all mechanical/pneumatic equipment, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings• Verify field conditions and perform any necessary repairs or adjustments• Monitor Energy Management• Repair doors, ceilings, hand railings, and floors and other general repairs, adjustments and installations about the property• Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories, etc.)• Perform preventive maintenance duties in accordance with C&W standards, building protocol, manufacturer recommendations and industry best practices. including changing filters, cleaning coils, flushing condensers, punching tubes, greasing fan, pump and motor bearings as required, inspecting and adjusting belts, replacing motor bearings, aligning pulleys and shafts, monitor condenser, chilled, heating and secondary water chemical treatment and its associated feed equipment, clean and maintain cooling towers, and perform annual inspections and other scheduled routines as directed.• Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps. Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of obstructions and debris• Check for properly operating emergency exit signs and lights and ensure free and clear access to emergency stairs and exits. Perform additional fire and life safety inspections as per NFPA and local jurisdiction, C&W standards, building protocol and as directed by superiors and property management• Document and report activities to supervisor• Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns• Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits• Complete all required C&W Safety Training as scheduled annually• Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hoursKEY COMPETENCIES• Technical Proficiency• Initiative• Flexibility• Multi-Tasking• Sense of UrgencyIMPORTANT EDUCATION• High School Diploma of GED Equivalent• Graduate of apprentice program or trade school preferredIMPORTANT EXPERIENCE• 5+ years of related work experience in operating mechanical, electrical, and plumbing systems in a commercial property settingADDITIONAL ELIGIBILITY QUALIFICATIONS• Appropriate license/permit for trade as may be required, i.e. Journeyman or Master Electrician License or City Licenses, such as Refrigeration Certificate of Fitness, High Pressure Boiler License, High Pressure Steam Operator, etc.)• May be required to have certification as a Universal Technician for CFC's depending on market licensure requirements• Possess and maintain a valid driver's license and good driving record with periodic checks (where applicable)• Basic Computing Skills in Outlook, Excel & Word• Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc.• Knowledgeable in energy management systems, techniques and operations.• Thorough knowledge in all building systems operations, maintenance and repair.May be only maintenance staff member on duty during certain shifts; may be required to work extended periods of time without relief when responding to priority/emergency situations (including overtime type assignments); may require shift work and/or on call dutiesWORK ENVIRONMENTThis job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Regularly required to travel outside between properties in varying weather conditions.PHYSICAL DEMANDSThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.• Must have ability to stoop, stand, climb, frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices• Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine• Involves movement between departments, floors, and properties to facilitate work• Ability to speak clearly so others can understand you• Ability to read and understand information presented orally and in writing• Regularly required to utilize vision abilities, allowing reading of printed material, drawings, and schematicsAAP/EEO STATEMENTC&W provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Further, the company takes affirmative action to ensure that applicants are employed and employees during employment are treated without regard to any of these characteristics. Discrimination of any type will not be tolerated.OTHER DUTIESThis job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice.Cushman & Wakefield provides equal employment opportunity. Discrimination of any type will not be tolerated. Cushman & Wakefield is an Equal Opportunity / Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or any other characteristic protected by state, federal, or local law.In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or email [email protected] . Please refer to the job title and job location when you contact us.