Technical Operator Salary in Omaha, NE

Job Title Operating Engineer Job Description Summary Responsible to ensure the efficient operation and maintenance of mechanical, electrical and plumbing equipment and systems for the assigned property(s). Responsibilities include (but are not limited to) maintaining a clean and safe working environment, performing rounds, conducting routine assessments, performance of day-to-day preventive and corrective maintenance, painting, and housekeeping for assigned properties Job Description ESSENTIAL FUNCTIONS AND RESPONSIBILITIES:• Perform all plumbing, electrical, or HVAC requirements of the building(s)• Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc.• Monitor and adjust all mechanical/pneumatic equipment, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings• Verify field conditions and perform any necessary repairs or adjustments• Monitor Energy Management• Repair doors, ceilings, hand railings, and floors and other general repairs, adjustments and installations about the property• Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories, etc.)• Perform preventive maintenance duties in accordance with C&W standards, building protocol, manufacturer recommendations and industry best practices. including changing filters, cleaning coils, flushing condensers, punching tubes, greasing fan, pump and motor bearings as required, inspecting and adjusting belts, replacing motor bearings, aligning pulleys and shafts, monitor condenser, chilled, heating and secondary water chemical treatment and its associated feed equipment, clean and maintain cooling towers, and perform annual inspections and other scheduled routines as directed• Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps. Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of obstructions and debris• Check for properly operating emergency exit signs and lights and ensure free and clear access to emergency stairs and exits. Perform additional fire and life safety inspections as per NFPA and local jurisdiction, C&W standards, building protocol and as directed by superiors and property management• Document and report activities to supervisor• Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns• Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits• Complete all required C&W Safety Training as scheduled annually• Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hoursKEY COMPETENCIES:• Technical Proficiency• Initiative• Flexibility• Multi-Tasking• Sense of UrgencyIMPORTANT EDUCATION:• High School Diploma of GED Equivalent• Graduate of apprentice program or trade school preferredIMPORTANT EXPERIENCE:• 5+ years of related work experience in operating mechanical, electrical, and plumbing systems in a commercial property settingADDITIONAL ELIGIBILITY QUALIFICATIONS:• Appropriate license/permit for trade as may be required, i.e. Journeyman or Master Electrician License or City Licenses, such as Refrigeration Certificate of Fitness, High Pressure Boiler License, High Pressure Steam Operator, etc.)• May be required to have certification as a Universal Technician for CFC's depending on market licensure requirements• Possess and maintain a valid driver's license and good driving record with periodic checks (where applicable)• Basic Computing Skills in Outlook, Excel & Word• Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc.• Knowledgeable in energy management systems, techniques and operations.• Thorough knowledge in all building systems operations, maintenance and repair.May be only maintenance staff member on duty during certain shifts; may be required to work extended periods of time without relief when responding to priority/emergency situations (including overtime type assignments); may require shift work and/or on call dutiesWORK ENVIRONMENT:This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Regularly required to travel outside between properties in varying weather conditions.PHYSICAL DEMANDS:The ability to observe details at close range (within a few feet of the observer)Problem Sensitivity - The ability to tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing that there is a problemControl Precision - The ability to quickly and repeatedly adjust the controls of a machine or a vehicle to exact positionsManual Dexterity - The ability to quickly grasp, manipulate, or assemble objectsSubstantial lifting (up to 50 pounds) is requiredAbility to stand and walk for extended or continuous periods of timeAbility to quickly bend, stretch, twist, or reach outAbility to ascend and descend staircases, ladders, and/or step stoolsAbility to operate applicable hand tools, power tools, and equipmentCommunication/ Expression -The ability to communicate information and ideas so others will understandDeductive Reasoning - The ability to apply general rules to specific problems to produce answers that make senseInformation Ordering - The ability to arrange things or actions in a certain order or pattern according to a specific rule or set of rules (e.g., patterns of numbers, letters, words, pictures, mathematical operations).Cushman & Wakefield provides equal employment opportunity. Discrimination of any type will not be tolerated. Cushman & Wakefield is an Equal Opportunity / Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or any other characteristic protected by state, federal, or local law.In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or email [email protected] . Please refer to the job title and job location when you contact us.

Job ID: 495863Ready Mixed Concrete Co., A CRH Company, has been the premiere concrete supplier in the Omaha-Council Bluffs metro area since 1929. With state-of-the-art production and delivery, Ready Mixed supplies all types of projects from highly technical commercial construction and high-volume paving to residential projects. Position Overview Responsible for performing maintenance, installation, repair and troubleshooting work involving batch plant equipment and facilities. Ideal candidate will have industrial plant maintenance experience, hydrolic / pneumatic experience, welding, basic troubleshooting of equipment.Key Responsibilities (Essential Duties and Functions) Communicates with Maintenance Manager on issues affecting equipment maintenance, personnel, and safety Maintains and reports to Maintenance Manager with weekly project list Participate in a preventative maintenance program to service plant equipment and facilities Receives written work orders or verbal instructions from supervisor Maintains project schedules and coordinates own daily work load Works with Plant Managers to establish timing of scheduled production plant maintenance according to factors such as production schedules, personnel for assistance, and availability of parts and equipment required for the repair Works with Quality Control Manager and Plant Managers to schedule and perform annual plant and equipment certifications Works with and Maintenance Manager to schedule maintenance personnel update training and certifications Works with Safety Department to correct safety and maintenance deficiencies Ensures that equipment and facilities are in compliance with LRC, OSHA, and EPA regulations Assists with scale calibrations at ready mix production plants Attends seminars related to employee and customer relation, proper equipment operation and maintenance, and product training updates. Upon approval from Maintenance Manager and Operations Manager, attends associated industry meetings. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Education/Experience Associates degree in Electrical/Mechanical Technology, Maintenance/Project Management, or equivalent of two years related experience. Must be able to attain Crane Operator, Boom Lift, Scissor Lift, Loader, and Forklift Certifications. Must have experience with various types of welding processes. Experience in troubleshooting hydraulic, pneumatic, electrical, and mechanical systems. Class A or B CDL preferred. Will required to obtain a Class A within one year of hire date, will help with training Physical Demands While performing the duties of this Job, the employee is regularly required to talk or hear. The employee is frequently required to stand and walk. The employee is occasionally required to sit; use hands to manipulate or feel; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee must regularly lift and /or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision and depth perception. Work Environment While performing the duties of this Job, the employee is regularly exposed to outside weather conditions. The employee is frequently exposed to moving mechanical parts. Depending on site location, the noise level in the work environment can range from moderate to loud. Hearing protection will be necessary in loud environments. What CRH Offers You Highly competitive base pay Comprehensive medical, dental and disability benefits programs Group retirement savings program Health and wellness programs A diverse and inclusive culture that values opportunity for growth, development, and internal promotion About CRH CRH has a long and proud heritage. We are a collection of hundreds of family businesses, regional companies and large enterprises that together form the CRH family. CRH operates in a decentralized, diversified structure that allows you to work in a small company environment while having the career opportunities of large international organization.If you're up for a rewarding challenge, we invite you to take the first step and apply today! Once you click apply now, you will be brought to our official employment application. Please complete your online profile and it will be sent to the hiring manager. Our system allows you to view and track your status 24 hours a day. Thank you for your interest! Ready Mixed Concrete Co., a CRH Company, is an Affirmative Action and Equal Opportunity Employer.EOE/Vet/Disability--If you want to know more, please click on this link. Date: Apr 9, 2024 Nearest Major Market: Omaha Nearest Secondary Market: Council Bluffs Job Segment: Plant Operator, Welding, Project Manager, Hydraulics, Electrical, Manufacturing, Technology, Engineering

FIELD APPLICATION SPECIALISTJob Summary:The Field Application Specialist is responsible for high-level technical and application training to Copan's customers. The primary focus of this position is to assist on-site customer installations, contributing to the development and implementation of training programs, and developing technical communications and change management initiatives for WASP, WASPLab and Liquid Based Microbiology (LBM) customers in the US and Canada. This position reports to Copan Diagnostics Inc. CEO and the US Field Application Specialist Manager.Supervisory Responsibilities: • None Duties/Responsibilities:• Conducts comprehensive user training on WASP and WASPLab to customer competency, optimal utilization, and self-sufficiency.• During installations FAS may be required to be at site of installation for up to 10 weeks Monday through Friday.• Demonstrates proficiency in application of COPAN's instruments and software by uncovering customer's needs, implementing customized solutions, and facilitating rapid adoption.• Collaborates with Field Service to enhance customer experience.• Ensures that the level of knowledge and trust in WASP and WASPLab is optimal at different customer sites.• Drives implementation process and optimal utilization of COPAN's automation.• Conducts product demonstrations, while promoting product value to support the sales of COPAN automated platforms at tradeshows, workshops and customer sites as needed.• Assists regional sales associates during the implementation of WASP and WASPLab.• Contributes to laboratory workflow productivity by maximizing the efficiency of the product training.• Routinely checks that the configuration of COPAN's automation is optimal and that customers are running QC procedures properly.• Work with the sales team to ensure maximum utilization of COPAN products (i.e. ESwab, FecalSwab and broths, etc.).• Work with the sales team and customer for ESwab, FecalSwab and LBM validations and implementation.Required Skills/Abilities: • Excellent communication and interpersonal skills, including conflict resolution and troubleshooting skills.• Superior presentation and demonstration of products.• Knowledge of workflow aspects as they relate to the laboratory important to the system implementation.• Coordination of training rotations and schedules within the laboratory to achieve cross training for all operators on all shifts.• Flexibility and ability to initiate new assignments and successfully complete them.• Attention to detail, constantly and persistently striving for excellence in technical and customer facing skills.• Superior project management abilities, leading conference calls, teaching, motivational and organizational skills with a proven track record of accomplishments.• Professionalism in customer, cross-team interactions with high concern for customer needs and expectations.• Knowledge and experience of technical and application support.• Energetic and positive attitude, able to communicate the organizational vision and goals, and guiding team members in achieving these goals.• Computer literacy required.• Ability to travel domestically and internationally.• Ability to be on call during evening/weekend as needed.Education and Experience: • B.S. Degree or equivalent work experience required, preferably in Medical Technology, Biological Sciences, or Microbiology.• Minimum 2 years' relevant work experience in a clinical laboratory setting.• Prior field experience in technical clinical training preferred. Physical Requirements: • Must be able to sit for long periods on airplane or in an auto to reach job destinations.• Must be able to have manual dexterity to operate equipment and tools required on the job.• Must occasionally lift and/or move up to 25 lbs.• Must be able to occasionally crouch, kneel, and/or duck into tight spaces of the equipment.• The employee will be required to stand for long periods of time. Kneeling and crouching for extended periods is also necessary. Working Conditions:• While performing the duties of this job, the employee is regularly exposed to a lab environment.• The employee is frequently exposed to moving mechanical parts.• The employee is occasionally exposed to bodily fluids and biological contaminants. PPE (Personal Protective Equipment) is required.• The noise level in the work environment is usually moderate.Job Type: Full-timeAbility to Travel: 80%Experience Level: Mid-LevelPlease send all resumes to : [email protected]

KMTV, the Scripps CBS station in Omaha, NE is hiring a Director of Engineering (DOE)! The DOE leads a team that provides world-class customer service to all internal and external business partners. You'll manage the design, specifications, documentation, maintenance and installation of technical systems and workflow for designated station(s) while maintaining a thorough understanding of technology, facilities and operations.WHAT YOU'LL DO:Model and lead a culture of empathy, customer service and leadership.Lead the research, design, installation and repair of all television, digital, OTT, Internet Systems, high power RF systems, production environments and all associated equipment using current platforms and protocols.  Manage building facilities and grounds, including HVAC, power generation and security systems.Partner with the news department to develop, build and support content workflow and support systems including integration and problem-solving software, hardware, networking and infrastructure while facilitating a collaborative environment between newsroom and production control staff.Motivate and manage a staff of professional and technical engineers, operators and IT technicians. Develop and grow staff in technology and Scripps culture to meet the on-going and future technological needs of the station and evaluate staff growth opportunities and assessments.Establish and implement engineering policies and procedures.Evaluate and maintain the spectrum and broadband usage of the facility.Manage projects.Plan, design and document current and future broadcast and digital systems.Collaborate with other departments to determine current and future studio and transmission and workflow needs.Prepare and track capital, expense, repair and maintenance budgets.Use company purchasing management system to purchase and track assets and services as well as replacement cycles.Evaluate equipment solutions.Keep the station compliant with the FCC Rules and Regulations, as well as related local, state, and federal regulations.Perform other duties as assigned.WHAT YOU'LL NEED:BS/BA in related discipline or equivalent years of experience preferredGenerally, 10+ years of experience in related field preferredPrior managerial experience preferredNetwork, SBE and/or Project Management certification preferredWHAT YOU'LL BRING:“Customer service first” mindset, ability to deliver a high level of customer serviceStrong interpersonal skillsStrategic planning abilitiesExcellent managerial skills in working with management, users, staff, peers and vendorsExcellent written and oral communication skillsAbility to relate technical matters to non-technical usersAbility to relate business matters to technical staffTeam playerSelf-directed and can work independentlyStrong project management skillsCan manage shifting priorities, demands and timelines smoothlyKnowledge of FCC rulesUnderstanding of electronic, electrical, mechanical and information systemsKeen interest in emerging broadcast related technologies and how they might be utilized in our business environmentADDITIONAL CONSIDERATIONS:Valid driver's license, good driving record, and ability to provide proof of insurance with the company required insurance limits.#LI-SM2#LI-OnsiteIf you are a current Scripps employee, please do not apply on this site. Please access our internal career site at Worklife > My Info > View Open Positions at Scripps.SCRIPPS' COMMITMENT TO EQUITY, DIVERSITY AND INCLUSION:At Scripps, we are committed to a diverse and inclusive culture that reflects the communities we serve. We are intentional about creating an environment where employees, our audiences and other stakeholders feel valued and inspired to reach their full potential and make authentic connections. We foster a workplace culture that embraces each person’s diversity, including the extent to which they are similar or different. Scripps leaders believe that an equitable and inclusive culture is not only the right thing to do, it is a business imperative. Read more about our commitment to equity, diversity and inclusion at scripps.com.ABOUT SCRIPPS:The E.W. Scripps Company (NASDAQ: SSP) is a diversified media company focused on creating a better-informed world. As one of the nation’s largest local TV broadcasters, Scripps serves communities with quality, objective local journalism and operates a portfolio of more than 60 stations in 40+ markets. Scripps reaches households across the U.S. with national news outlets Scripps News and Court TV and popular entertainment brands ION, Bounce, Defy TV, Grit, ION Mystery and Laff. Scripps is the nation’s largest holder of broadcast spectrum. Scripps is the longtime steward of the Scripps National Spelling Bee. Founded in 1878, Scripps’ long-time motto is: “Give light and the people will find their own way.”As an equal employment opportunity employer, The E.W. Scripps Company and its affiliates do not discriminate in its employment decisions on the basis of race, sex, sexual orientation, transgender status, gender, color, religion, age, genetic information, medical condition, disability, marital status, citizenship or national origin, and military membership or veteran status, or on any other basis which would be in violation of any applicable federal, state or local law. Furthermore, the company will make reasonable accommodations for qualified individuals with known disabilities unless doing so would result in an undue hardship for the company.

Job ID: 495863Ready Mixed Concrete Co., A CRH Company, has been the premiere concrete supplier in the Omaha-Council Bluffs metro area since 1929. With state-of-the-art production and delivery, Ready Mixed supplies all types of projects from highly technical commercial construction and high-volume paving to residential projects.Position Overview Responsible for performing maintenance, installation, repair and troubleshooting work involving batch plant equipment and facilities. Ideal candidate will have industrial plant maintenance experience, hydrolic / pneumatic experience, welding, basic troubleshooting of equipment.Key Responsibilities (Essential Duties and Functions) Communicates with Maintenance Manager on issues affecting equipment maintenance, personnel, and safety Maintains and reports to Maintenance Manager with weekly project list Participate in a preventative maintenance program to service plant equipment and facilities Receives written work orders or verbal instructions from supervisor Maintains project schedules and coordinates own daily work load Works with Plant Managers to establish timing of scheduled production plant maintenance according to factors such as production schedules, personnel for assistance, and availability of parts and equipment required for the repair Works with Quality Control Manager and Plant Managers to schedule and perform annual plant and equipment certifications Works with and Maintenance Manager to schedule maintenance personnel update training and certifications Works with Safety Department to correct safety and maintenance deficiencies Ensures that equipment and facilities are in compliance with LRC, OSHA, and EPA regulations Assists with scale calibrations at ready mix production plants Attends seminars related to employee and customer relation, proper equipment operation and maintenance, and product training updates. Upon approval from Maintenance Manager and Operations Manager, attends associated industry meetings. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Education/Experience Associates degree in Electrical/Mechanical Technology, Maintenance/Project Management, or equivalent of two years related experience. Must be able to attain Crane Operator, Boom Lift, Scissor Lift, Loader, and Forklift Certifications. Must have experience with various types of welding processes. Experience in troubleshooting hydraulic, pneumatic, electrical, and mechanical systems. Class A or B CDL preferred. Will required to obtain a Class A within one year of hire date, will help with training Physical Demands While performing the duties of this Job, the employee is regularly required to talk or hear. The employee is frequently required to stand and walk. The employee is occasionally required to sit; use hands to manipulate or feel; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee must regularly lift and /or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision and depth perception.Work Environment While performing the duties of this Job, the employee is regularly exposed to outside weather conditions. The employee is frequently exposed to moving mechanical parts. Depending on site location, the noise level in the work environment can range from moderate to loud. Hearing protection will be necessary in loud environments.What CRH Offers You Highly competitive base pay Comprehensive medical, dental and disability benefits programs Group retirement savings program Health and wellness programs A diverse and inclusive culture that values opportunity for growth, development, and internal promotion About CRH CRH has a long and proud heritage. We are a collection of hundreds of family businesses, regional companies and large enterprises that together form the CRH family. CRH operates in a decentralized, diversified structure that allows you to work in a small company environment while having the career opportunities of large international organization.If you're up for a rewarding challenge, we invite you to take the first step and apply today! Once you click apply now, you will be brought to our official employment application. Please complete your online profile and it will be sent to the hiring manager. Our system allows you to view and track your status 24 hours a day. Thank you for your interest!Ready Mixed Concrete Co., a CRH Company, is an Affirmative Action and Equal Opportunity Employer.EOE/Vet/Disability--If you want to know more, please click on this link .

POSITION SUMMARY Integration engineers require a substantial amount of specialized expertise, including power system studies, software and hardware engineering, interface protocols, and general problem-solving skills. The problems to be solved have not been solved before, except in the broadest sense. Projects will include new and challenging problems with an input from a broad range of engineers where the system integration engineer "pulls it all together." RESPONSIBILITIES Develop and maintain an advanced level of technical expertise in electric power system protection and automation Work closely with design, vendor, utility, regulatory agency, operators, owners, contractors, and protection engineers to create system programming which translates the owner's requirements into concrete technical designs. Develop settings for all layers of control including; protective relaying, and communication processors. Simulate power system conditions in a lab environment to test communications and automation functionality of integrated IEDs and software packages. Write complete, detailed reports using a computer, and accurately process job billing. Standardize logic schemes via documentation using AutoCad. Track, organize and manage projects using web based storage. QUALIFICATIONS Minimum Job Qualifications: Strong knowledge of the National Electrical Code and various industry standards, such as NERC, IEEE, OSHA and NFPA. Requires special skills in a majority of the following: Generation and co-generation start-up - ANSI, NEC, and NEMA specification; - complex control systems - medium and high voltage substation start-up. Thorough knowledge of electrical apparatus testing with a strong theoretical understanding of electrical power systems, and good aptitude for problem evaluation. Requires a high degree of communication, and organizational skills. Communicate effectively, in writing and verbally, with clients, peers and management. Good judgment, dependable, supervises large-scale projects with technical expertise and good business management skills. Strong computer skills including editing, formatting and using templates in Microsoft Office Suite, use of Manufacturer specific software and documentation of design within AutoCad. Willing to work flexible hours, weekends, holidays and night work. Must be available for out-of-town and international travel of up to several weeks. Regularly required to stand, walk, use hands and fingers, handle or feel objects, tools or controls; reach with hands and arms; stoop, kneel, crouch, or crawl; talk, hear, and smell. Frequently required to sit, climb and balance. Specific vision abilities required by this job include close vision, distance vision, basic color differentiation and the ability to adjust focus. Valid Driver's License. EDUCATION AND CERTIFICATIONS Graduate Engineer BSEE or BSME and five years' experience in design, testing and commissioning of protection and automation systems. Three years' experience as Power Systems Engineer Registered Engineer in Training or the ability to obtain licensure PHYSICAL REQUIREMENTS Medium Lifting (30 Ibs. - 45 Ibs.) Heavy Lifting (over 50 Ibs.) Frequent Standing Frequent kneeling / crawling / stooping Frequent bending / twisting Frequent climbing (stairs, ladders) Frequent driving (car, van, truck) Due to the safety sensitive aspect of the role, candidates are required to successfully pass a drug test prior to employment. In addition, you will also be required to complete and pass a pre-employment background check and a motor vehicle records check. ENVIRONMENTAL DEMANDS Extreme cold (below 32*) Extreme heat (above 100*) Noise Level (Medium / High need to shout to be heard) Working around moving machinery (fork-lifts, tractors) Protective Equipment Required (earplugs, gloves, eyewear, respirator, mask, etc.) Work outdoors (no effective protection from weather) TRAVEL TIME REQUIRED 25% At Vertiv, we offer the stability of a global leader in a growing industry and the opportunity of a startup. We design, manufacture and service the mission-critical infrastructure technologies for vital applications in data centers, communication networks and commercial and industrial environments. With $5.0 billion in revenue, a strong customer base and global reach in nearly 70 countries, our move to establish a standalone business enables us to deliver greater value to our customers and create new opportunities for our people. The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to [email protected] No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, O, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. The anticipated pay range for this role in the State of Washington locality is between $35 to $62 per hour-pay ranges for other geographic localities may vary. Certain roles are eligible for additional rewards, including merit increases, annual bonus and stock. These awards are allocated based on individual performance and are role based. In addition, certain roles also have the opportunity to earn sales incentives based on revenue or utilization, depending on the terms of the plan and the employee's role. The role is eligible to participate in a comprehensive and competitive benefits program, including medical, dental, vision, disability, PTO (accrued up to 15 days the first year), holiday pay (9 days), and 401k. Additional details about total compensation and benefits will be provided during the hiring process. The anticipated pay range for this role in the Colorado locality is between $32 to $60 per hour-pay ranges for other geographic localities may vary. Certain roles are eligible for additional rewards, including merit increases, annual bonus and stock. These awards are allocated based on individual performance and are role based. In addition, certain roles also have the opportunity to earn sales incentives based on revenue or utilization, depending on the terms of the plan and the employee's role. The role is eligible to participate in a comprehensive and competitive benefits program, including medical, dental, vision, disability, PTO, holiday pay, and 401k. Additional details about total compensation and benefits will be provided during the hiring process.The estimated deadline to submit an application for this role is 3/18/2024 date, the company may need to extend the deadline based off the needs of the business and open role. If an extension is needed, the date will be updated accordingly. The anticipated pay range for this role in the California locality is between $35 to $64 per hour-pay ranges for other geographic localities may vary. Certain roles are eligible for additional rewards, including merit increases, annual bonus and stock. These awards are allocated based on individual performance and are role based. In addition, certain roles also have the opportunity to earn sales incentives based on revenue or utilization, depending on the terms of the plan and the employee's role. The role is eligible to participate in a comprehensive and competitive benefits program, including medical, dental, vision, disability, PTO, holiday pay, and 401k. Additional details about total compensation and benefits will be provided during the hiring process.

Must provide work history and or resume to be consideredPay: $34+/ with experience This position is on 12 hour shifts with a 3-2-2 rotating schedule.Benefits:Paid Time off from first day. Earn up to 14 days in your first year!401K starts immediately, company matches 50% on the first 6%Medical Benefits after 30 days of employment6 day holidayPaid WeeklyQuarterly BonusesEducation Assistance for Employees and dependentsDescription:The Industrial Utilities Technician works closely with all plant personnel to support improved utility system and equipment reliability as well as efficient and cost-effective use of plant resources. This position is a key member of a cross functional team that supports the improvement of asset reliability. The primary role of the Industrial Utilities Technician is to continuously improve the reliability, efficiency, and utilization of plant utility systems and equipment. This is accomplished by utilizing mechanical and electrical expertise in the operation and precise installation, maintenance, and repair of plant utility systems and equipment followed by concise and accurate documentation of all activities and observations.Job Duties:Apply industrial maintenance skills and knowledge to install, operate, maintain, and repair plant utility systems and equipment.Monitor and record system performance and make adjustments to assure the safe and efficient operation of plant utility systems and equipment.Initiate and perform condition monitoring tasks including preventive and predictive maintenance.Troubleshoot equipment failures to ascertain possible failure modes and participate with operations, plant engineering, suppliers, and other associates to improve equipment reliability.Utilize the company's Enterprise Asset Management System (EAMS) and supports its use as a key management information tool.Recommend, develop, and implement system modifications to improve equipment operations and provide for attainment of plant and department goals.Provide direction and training for less skilled maintenance personnel and machine operators.Requirements:Must be 18 years oldMust be willing to work overtime and weekendsMust be willing to work holidays if scheduledMust be authorized to work in the United States3 years of work experience in mechanical and electrical systems as well as specific training in ammonia refrigeration and industrial boiler operation is critical to the success of the Industrial Utilities Technician. (A combination of experience and/or training at an accredited technical school will be given consideration.)This position requires technical writing and verbal communications skills and the ability to read and work from Original Equipment Manufacturer (OEM) technical manuals, Process and Instrumentation Diagrams (P&IDs), and control schematics. Must have the ability to learn and effectively use various software programs including the company's Enterprise Asset Management System (EAMS) and various building management systems.Any questions or help with your application should be directed to [email protected] or can call 531-239-3620.Hormel Foods Corporation, in association with Papillion Foods, LLC, is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, age, religion, gender, gender orientation, gender identity, national origin, disability, or veteran status.recblid 2xuxsnjlw4ag4irhes1kgpmwsdc38j

The work we do matters!Hiring Agency:Transportation - Agency 27Location: Elkhorn Job Posting, Omaha Job PostingHiring Rate:$21.819Classification Salary Range:$21.82 - $32.16Job Posting:JR2024-00005586 Automotive/Diesel Mechanic - OMAHA - Tools Provided! (Evergreen) (Open)Applications No Longer Accepted On (If no date is displayed, job is posted as open until closed):Job Description:Description:Do you like solving a wide range of mechanical problems? Are you looking for new challenges? As a Diesel Technician at the Nebraska Department of Transportation, you'll be part of a supportive team that takes great pride in ensuring equipment is on the road, where it belongs, to help support the incredible freedom of travel throughout the State of Nebraska. The Nebraska Department of Transportation (NDOT) is seeking a dedicated and hardworking team player to join us in our mission to enhance the quality of life for Nebraskans by building and maintaining a convenient, safe, and innovative statewide transportation system!We reward our employee's hard work with a friendly and supportive work environment and a comprehensive benefits package that includes:• State-matched retirement contribution of 156%!• 13 paid holidays• Generous leave accruals that begin immediately• A culture that embraces work-life balance• Military leave• Tuition reimbursement program• Dependent tuition reimbursement program with partnering Nebraska community colleges• Public Service Loan Forgiveness Program (PSLF) through the Federal government• 79% employer-paid health insurance plans• Dental and vision insurance plans• Employer-paid $20,000 life insurance policy• Wide variety and availability of career advancement as the largest and most diverse employer in the State• Opportunity to be part of meaningful work and make a difference through public service• Training and development based on your career aspirations• Job security and stability, even during times of economic hardship• Employee Assistance Program• Fun, inviting teammatesPlease reach out to Alexis Vlademar, Talent Acquisition Partner, at 402-525-2304, if you have questions or to learn more.Job Duties• Perform highly skilled and complex diagnosis, maintenance, and repair of multiple makes and models of heavy-duty trucks, and road construction and maintenance equipment containing multiple, computerized systems/sensors, as well as medium and lightweight vehicles, and other motorized equipment. • Fabricate and repair equipment and parts by using a variety of welders, welding materials, and methods to adapt incompatible parts, replace unavailable parts, secure attachments, and repair damage. • Calibrate various systems on heavy-duty vehicles and equipment that distribute various materials as they pertain to road and weather conditions and allow operators to drive the vehicles and equipment safely and efficiently. • Inspect new equipment to ensure that it meets specifications and set up new equipment to ensure it is road-ready. • Evaluate equipment to identify adjustments needed to accommodate auxiliary attachments, equipment, and operating systems. Install, troubleshoot, repair, and replace mechanical, electrical, computer, and hydraulic system components to restore equipment to a state of safe and operational state. • Maintain hydraulics systems; install and monitor electrical systems; repair steering systems; repair suspension systems, brake systems, drive trains, and fuel systems, and repair/overhaul and/or replace diesel and/or gasoline engines.• Perform other duties as assigned.Requirements / Qualifications:Minimum Qualifications: Practical work experience performing automotive/diesel maintenance and repair, including use of computerized diagnostic instruments and equipment OR post-high school vocational or technical coursework in automotive/diesel mechanics including instruction in computerized diagnostic equipment and in automotive/diesel mechanical maintenance and repair practices, equipment, and technologies. Preferred Qualifications: A degree in Automotive Diesel Mechanics, with experience in the repair of trucks or heavy equipment. Experience in welding and fabrication. Basic computer experience. Possess or be able to obtain a Class A CDL within 90 days of hire through our in-house CDL training program. Costs to obtain the permit will be covered by the department. Other: Must be able to be reached and report to work for emergencies and snow removal within 30 minutes.Knowledge, skills, and abilities:Ability to work and communicate with a team. Ability to work with minimal supervision. Safety oriented. Self-motivated. High integrity. Trainable. Ability and willingness to learn and accept challenges by learning and adjusting to new technology and processes. Quality/results-oriented sense of urgency in the performance of duties. Ability to work safely and demonstrate safe and reliable practices and behaviors. Ability to interact in a positive manner and treat co-workers and supervisors with dignity and respect, work to resolve conflicts, and make good decisions using sound judgment, processes, and purpose.BenefitsWe offer a comprehensive package of pay, benefits, paid time off, retirement and professional development opportunities to help you get the most out of your career and life. Your paycheck is just part of your total compensation.Check out all that the State of Nebraska has to offer! For more information on benefits currently offered to permanent teammates, please visit: https://statejobs.nebraska.gov/index.html#benefitsEqual Opportunity StatementThe State of Nebraska values our teammates as well as a supportive environment that strives to promote diversity, inclusion, and belonging. We recruit, hire, train, and promote in all job classifications and at all levels without regard to race, color, religion, sex. age, national origin, disability, marital status or genetics.Current employees of the State of Nebraska should NOT apply on this external career. Instead go to Workday and access the Jobs Hub - Internal Apply app from your home landing page.