Instrumentation Technician Salary in Orlando, FL

Job DescriptionJob DescriptionPerforms laboratory procedures such as blood harvesting and urine monitoring according to protocol as assigned as well as any special procedures. Works with coordinators in assuring the smooth and orderly flow of procedures in the Clinics, Lab and Urine Monitoring areas.• Collects and harvests plasma, serum, and all other required laboratory specimens according to protocol specifications.• Monitors the collection of urine and/or fecal specimens from subjects participating in studies.• Performs advanced technical procedures including platelet aggregation, PBMC, flow & chip cytometry, and any other special procedures. • Completes all required study documents and may train on special equipment per protocol.• Assures that all procedures and processing areas are maintained in a neat, clean, and organized manner.• Performs other duties as assigned. Serves as a mentor and trainer to new technicians.High / Secondary school diploma or equivalent and relevant formal academic / vocational qualification 0-1 yr experience•PhlebotomyDetail oriented• Strong time management skills• Ability to multi-task• General computer skills including Microsoft Office• Written and verbal communication skills• Ability to work under constant exposure to high pressure, intense concentration• Ability to work well in a collaborative team environment • Knowledge of lab instrumentation and testing procedures• Work is performed in a clinical environment.• Exposure to biological fluids with potential exposure to infectious organisms.

Job DescriptionPerforms laboratory procedures such as blood harvesting and urine monitoring according to protocol as assigned as well as any special procedures. Works with coordinators in assuring the smooth and orderly flow of procedures in the Clinics, Lab and Urine Monitoring areas.• Collects and harvests plasma, serum, and all other required laboratory specimens according to protocol specifications.• Monitors the collection of urine and/or fecal specimens from subjects participating in studies.• Performs advanced technical procedures including platelet aggregation, PBMC, flow & chip cytometry, and any other special procedures. • Completes all required study documents and may train on special equipment per protocol.• Assures that all procedures and processing areas are maintained in a neat, clean, and organized manner.• Performs other duties as assigned. Serves as a mentor and trainer to new technicians.High / Secondary school diploma or equivalent and relevant formal academic / vocational qualification 0-1 yr experience•PhlebotomyDetail oriented• Strong time management skills• Ability to multi-task• General computer skills including Microsoft Office• Written and verbal communication skills• Ability to work under constant exposure to high pressure, intense concentration• Ability to work well in a collaborative team environment • Knowledge of lab instrumentation and testing procedures• Work is performed in a clinical environment.• Exposure to biological fluids with potential exposure to infectious organisms.

Job descriptionJOB DESCRIPTION:We have a Controls Engineer position open in Orlando, FL.This position is responsible for controls engineering project requirements involving control system design, DCS/PLC programming, control panel design, instrumentation, check-out support, and start-up assistance.RESPONSIBILITIES:Must be organized, technically competent, have effective oral and written communications, and experience in working in a multi-disciplined environment and interfacing with engineers, designers, and drafters.Designs, develops, and implements DCS/PLC control system (logic software and hardware) to meet process requirements. As well as complying with any local or government agency design/implementation codes.Knowledge of control panel and system design standards and code practices for any local or government agenciesDevelops documents detailing control configuration and design. Documents include Theory/Description of operation, Detailed control system design description, system implementation/acceptance test plans.Able to interface with facility design to optimize panel location minimizing voltage drop and optimizing panel maintenance.Able to perform the following system design calculations/analysis: Short circuit protection, harmonics, noise reduction/cancellation, power consumption, load flow, short circuit protection, protective relay/circuit design, ground fault monitoring, safety system implementation (SIL rating)Knowledge of analyzing system design for Hazard analysis development and mitigationAbility to implement control system redundancy to minimize single points of failure.Develops schematics of control system configuration, wiring, network layout, and equipment panel layouts on AutoCADWill assist with the initial start-up and debugging of integrated systems and the development of system documentation.Individual will be working on automation and control system integration projects for clients in industries such as entertainment and manufacturing.Will act as technical lead on projects and guide lower-level engineers, technicians, and contractors.Will act as Project Manager on smaller projects ranging from $50k to $250k. This includes but is not limited to:Develops and executes implementation plans for the project.Assigns work to meet overall project deadlines.Ensures that all project team members clearly understand the scope of W-M responsibilities.Develops schedules for W-M and customer requirements.Evaluates progress on project(s) and details changes.Responsible for all purchasing and subcontractor requirementsResponsible for the development of costs and proposal of change orders to contract scope.QUALIFICATIONS:Education Bachelor’s Degree in Electrical Engineering. (Directly related experience may be substituted for degree)5+ years in the following areas is preferred: Ethernet-based control systems, safety systems, instrumentation, components, logic programming, and DCS programming (i.e., DeltaV, Experion, 800xA.)Experience with instrumentation and controls/PLC system design (i.e., Allen Bradley, Modicon, Siemens) required.Experience with AutoCAD is also desired.Key Competencies Knowledge of contract documents and specifications. Ability to collect field data and accurately record findings. Ability to perform system design functions. Planning, Customer Focused, Timely Decision Making, Informing, Organizing, Priority Setting, Problem SolvingSkills All employees are required to be proficient in the use of Microsoft Windows and Office environments.TRAVEL: Ability to travel up to 35%.PHYSICAL DEMANDS OF POSITION:Seeing, color perception, hearing, listening, clear speech, dexterity in hands, driving, lifting, climbing, ability to mount and dismount equipment, pushing, and pulling.WORKING CONDITIONS:Standard office environment, On-site office environment, and diverse industrial environments. Frequent PC usage, fax machines, copy machines, and phones.Join our team as a Controls Engineer and contribute to the development of innovative solutions in the field of automation. We offer competitive compensation, comprehensive benefits package, and opportunities for professional growth. Apply today to be part of our dynamic team!Job Type: Full-timeSchedule:8 hour shiftApplication Question(s):Do you have experience in ethernet based control systems, DCS programming, and PLC system design?Ability to Relocate:Orlando, FL: Relocate before starting work (Required)Work Location: In person

Nemours is seeking a Medical Lab Technician (CASUAL/PRN), Evening/Night Shift, to join our Nemours Children's Health team in Orlando, Florida. The provision of laboratory services by the performance of clinical laboratory procedures and related tasks for the clinical laboratory and the areas of molecular diagnostics and flow cytometry, while under the oversight of a medical technologist and direction of a laboratory supervisor or manager. Performance of a variety of analytical procedures of moderate to high complexity, using manual and automated methods, and through a variety of clinical laboratory methodologies. In this function, must be able to perform all required calibration, quality control, statistical calculations and other process control and mathematical functions. Associate must also be able to understand concepts such as linearity, and standard deviation, as it applies to the performance of analytical testing in a clinical laboratory. Routinely performs a range of clinical analyses in molecular department by properly utilizing a variety of methodologies and instrumentation according to laboratory policies and procedures and in accordance with all regulatory agency requirements. Assists in the development and validation of various complex tests for implementation in the molecular and flow cytometry departments. Helps with completing proficiency testing and maintaining supply inventory as needed. Orders, accessions, statuses, and reports results of tests performed on patient specimens, monitoring a variety of critical clinical issues, such as patient identifiers, specimen quality, order appropriateness, etc. In this function, must be able to read and understand a variety of written material such as specimen requisitions, worksheets, patient identification, specimen requirements, etc., whether performing this task manually (e.g., on paper) or using an information system. Must be able to check and verify information such as patient identification, lot numbers, expiration dates, etc., and act appropriately. Monitors pending logs regularly to provide rapid turnaround time. Appropriately uses quality control materials, calibrates, and performs troubleshooting and maintenance on laboratory equipment following established procedures, and as assigned by supervisor. Must be able to take responsibility for laboratory equipment performance, as demonstrated by interactions with technical representatives for instrument maintenance, both preventive and repair; must be able to successfully perform start-up and shutdown of complex analytical equipment. Recognizes need for additional Quality Control, maintenance, or specimens prior to releasing test results. If specifically trained and assigned to specimen collection, collects specimens from patients and others or assists, e.g. in assisting physicians at bone marrow aspirate collections. Such collections may take place in a variety of environments. Such collections may require entering patient isolation rooms, whereby, associate must follow appropriate infection control procedures. Transports specimens as assigned, for example, from Operating Room, following appropriate procedures. Reviews technical and administrative procedures as assigned. The medical lab technician is responsible for staying informed about section changes, procedure changes and updates, etc. Reviews questions about procedures with section supervisor or designee as needed, informing supervisor when confusion about instructions or procedures exists. Handles supply and inventory issues as required/assigned, identifying key technical parameters, such as lot numbers, storage requirements, etc. as required for performance of laboratory procedures. Follows laboratory section inventory procedures (e.g., recording date received, condition when received, checking order forms, invoices, etc.) Retrieves supplies and equipment from storage areas as needed. Answers telephone as assigned; in this function, interacts routinely with a variety of individuals, including physicians, and other clinical staff, patients and their families, inspectors, vendors, etc. Must be able to demonstrate good customer service, for example, answering telephone promptly, referring calls appropriately, etc. Follows all laboratory and hospital safety policies (including, but not limited to chemical safety, e.g., the laboratory's Chemical Hygiene Plan, infection control policies, etc.). Must be able to perform functions using personal protective equipment and barrier protection, such as disposable gloves, laboratory coats, shields, goggles, etc. Must be able to handle a variety of hazardous materials, such as chemicals and pathogenic organisms. Trains others as assigned (e.g., students, new employees, etc.). Participates in department and hospital quality and improvement programs.Job RequirementsAssociate's Degree in Clinical Lab Program, or education and training that is equivalent is required. Minimum of six (6) months experience required. Experience can include clinical practicum time as a student. Florida Technician License in Chemistry, Hematology, Serology, Microbiology and Immunohematology required. Molecular Pathology (Preferred). Nationally recognized certification as a Medical Technician or equivalent (ASCP, AAB or AMT) required. Willingness to learn other areas is a must.

Instrumentation Technician Orlando, FL, USA Req #30806Tuesday, April 9, 2024Who We Are: Coca-Cola Beverages Florida, LLC (Coke Florida) is a family-owned independent Coca-Cola bottler that is the third largest privately-held and the sixth largest independent Coca-Cola bottler in the United States. Coke Florida sells, markets, manufactures and distributes over 600 products of The Coca-Cola Company and other partner companies including Monster Beverage Corporation and BODYARMOR. Coke Florida was named as a 2023 US Best Managed Company by Deloitte Private and The Wall Street Journal. This program recognizes outstanding U.S. private companies and the achievements of their management teams in four key areas: strategy, ability to execute, corporate culture, and governance/financial performance. What We Offer:Eligible full time Coke Florida Associates can participate in our Total Rewards Program which includes: Total Wellness Programs including health, dental and vision plans 401K program with healthy company match Supplemental Life Insurance Three weeks of vacation pay, and 11 company paid holidays* Tuition reimbursement Employee Assistance Programs (EAP) Competitive compensation Coke Florida is looking for an Instrumentation Technician based out of our Orlando location. We're currently looking for 3rd shift, working 6pm to 6:30am on a 2-2-3 rotation. What You Will Do: As a Coke Florida Instrumentation Technician, you will be responsible for the maintenance, repair, and upgrade of all automation instrumentation in the facility and to ensure all critical control equipment is within calibration standards. The instrumentation technician will provide support to plant operations and during critical equipment breakdowns. Roles and Responsibilities: Maintain all the Process Control systems and calibrate all critical control equipment, responsible for documenting findings Backup SCADA, wastewater, PLC, variable frequency drive, systems and evaluate PLC equipment Program and integrate the PLC systems Program and integrate the Automation systems. Train Maintenance personnel (PLC and Electronic equipment). Order Allen-Bradley parts; Set up and implement preventive maintenance procedure for process control systems (PLC) and Identify areas to be improved in the process systems; makes recommendations and implements approved changes) Work closely with the contractors on new Electrical and Electronic installations Provides technical expertise on project teams, Monitor production equipment Completes calibration, project and equipment status reports. Diagnose problems when machinery malfunctions. Conduct electrical repairs (i.e., wiring); complete work orders, Maintain logs and records Comply with GMP policies and procedures; Comply with Safety policies and procedures; Comply with all Integrated Management System policies and procedures Monitor instrumentation inventory Operate forklift complete paperwork as required Crib and inventory Participate in team meetings as required For this role, you will need: High School Diploma or GED At least 2 years Electrical and mechanical training for industrial environment experience Additional qualifications that will make you successful in this role: Ability to communicate and comprehend specifics regarding equipment problems; computer skills for ordering parts and troubleshooting; walking and standing on plant production floor for short periods of time; body agility (occasional climbing, kneeling, reaching) Ability to read, write and comprehend equipment manuals, safety regulations, and operating instructions. Ability to complete necessary reports Ability to move up to 70 pounds; manual dexterity to manipulate small objects; ability to distinguish color-coded wire and objects This job description is not an exhaustive list of all functions that the employee may be required to perform, and the employee may be required to perform additional functions. Coke Florida reserves the right to revise the job description at any time and to assign additional duties and responsibilities as needed.Employment with Coke Florida is at-will. The employee must be able to perform the essential functions of the position satisfactorily and, if requested, reasonable accommodations may be made to enable qualified individuals with disabilities to perform essential functions of their job, absent undue hardship.Coca-Cola Beverages Florida is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity and/or expression, status as a veteran, and basis of disability or any other federal, state or local protected class.Other details Job Family Manufacturing Job Function Quality Pay Type Hourly Apply NowinitStaticMap(true); Coke Florida is looking for an Instrumentation Technician based out of our Orlando location. We're currently looking for 3rd shift, working 6pm to 6:30am on a 2-2-3 rotation. What You Will Do: As a Coke Florida Instrumentation Technician, you will be responsible for the maintenance, repair, and upgrade of all automation instrumentation in the facility and to ensure all critical control equipment is within calibration standards. The instrumentation technician will provide support to plant operations and during critical equipment breakdowns. Roles and Responsibilities: Maintain all the Process Control systems and calibrate all critical control equipment, responsible for documenting findings Backup SCADA, wastewater, PLC, variable frequency drive, systems and evaluate PLC equipment Program and integrate the PLC systems Program and integrate the Automation systems. Train Maintenance personnel (PLC and Electronic equipment). Order Allen-Bradley parts; Set up and implement preventive maintenance procedure for process control systems (PLC) and Identify areas to be improved in the process systems; makes recommendations and implements approved changes) Work closely with the contractors on new Electrical and Electronic installations Provides technical expertise on project teams, Monitor production equipment Completes calibration, project and equipment status reports. Diagnose problems when machinery malfunctions. Conduct electrical repairs (i.e., wiring); complete work orders, Maintain logs and records Comply with GMP policies and procedures; Comply with Safety policies and procedures; Comply with all Integrated Management System policies and procedures Monitor instrumentation inventory Operate forklift complete paperwork as required Crib and inventory Participate in team meetings as required For this role, you will need: High School Diploma or GED At least 2 years Electrical and mechanical training for industrial environment experience Additional qualifications that will make you successful in this role: Ability to communicate and comprehend specifics regarding equipment problems; computer skills for ordering parts and troubleshooting; walking and standing on plant production floor for short periods of time; body agility (occasional climbing, kneeling, reaching) Ability to read, write and comprehend equipment manuals, safety regulations, and operating instructions. Ability to complete necessary reports Ability to move up to 70 pounds; manual dexterity to manipulate small objects; ability to distinguish color-coded wire and objects Orlando, FL, USA

Company DescriptionWe are SGS - the world's leading testing, inspection and certification company. We are recognized as the global benchmark for sustainability, quality and integrity. Our 98,000 employees operate a network of 2,650 offices and laboratories, working together to enable a better, safer and more interconnected world.Job DescriptionOur Orlando, FL laboratory is looking for a full-time Laboratory Technician to join their Extractions team! The Laboratory Technician will prepare samples with accuracy and precision in accordance to SGS' analytical SOPs. The Laboratory Technician works independently and as part of a team to meet daily production targets and ensure hold times and turnaround times are met. The Laboratory Technician always follows safe laboratory practices and maintains a safe working environment. Job FunctionsAfter appropriate training, independently prepare samples for analysis according to SGS' analytical SOPs using basic instrumentation specific to the department and analytical methodologiesPerforms routine operation, maintenance, calibration of prep instruments/equipmentMay assist with validation and MDL studies.Inputs and maintains technical information as needed to support the laboratory functions/operations.Maintains Laboratory Notebook where applicable.Adheres to internal standards, policies, and procedures.Performs other duties as required.QualificationsHigh school diploma and 0-2 years of experience in Analytical Chemistry Laboratories or prior experience working with one's hands (Required)Associates Degree in a Chemistry or similar scientific discipline and 1-2 years of years' relevant experience in Analytical Chemistry Laboratories (Preferred)Advanced English language skills (Required)Basic mathematical and reasoning skills (Required)Experience with Microsoft Office (Excel, Outlook, Word) (Required)Experience with LIMS (Required)Ability to lift/carry/push or pull upwards of 25 lbs on a frequent basis (Required)