Facilities Technician Salary in Kent, WA

Job Description The Company US Wire Group is the parent of three independent companies (five manufacturing facilities) which produce steel wire and cable/wire related products that serve many industries. The independent business model fosters entrepreneurship and growth and allows professional development at all levels. US Wire Group is part of the Metals Processing Group and wholly owned by The Heico Companies, LLC. Our philosophy of developing a close customer contact to provide prompt, responsive service and to meet our customer's changing needs allows us to be leaders within our respective industries. Products are marketed domestically through a direct sales force, manufacturer's representatives and an established network of independent distributors. Our company is diverse and has a solid management base, product/market niches and efficient manufacturing capabilities.$20-$25 per hour The Position The Quality Control Technician tests and inspects products at various stages of the production process and compiles and evaluates statistical data to determine and maintain quality and reliability of products.Job Description Primary Responsibilities Performs, records, and evaluates chemical and physical tests necessary to control production processes or evaluate quality of in-process and finished goods (tensile, bend, torsion, acid/base chemistry) Recommends corrective measures and determines corrective actions to be taken. Reports deviation from quality levels and standard practice to immediate supervisor and shift foreman. Ensures that practices being used are in accordance with standard practice data. Provides technical assistance to department heads in project and experimental work. Identifies all rejected material and assists in its reclassification and disposition. Provides technical support for experimental and project work by recording and correlating operating data and results. Recommends improvements in process, standard practices and product evaluation. Performs process audits as determined by operating procedures and job work practices. Other as assigned Job Requirements High school graduate or GED. Ability to work with mathematical concepts such as fractions, percentages, ratios, and proportions to practical situations. Ability to read, analyze, and interpret general business procedures, specifications, and technical procedures. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the public. comfortable working with Microsoft Office (Word, Excel, Outlook). Must be at least intermediate skill level in Excel. Must be able to pass preemployment background, drug/alcohol, and physical screenings Must be able to work independently, as a team, and be able to work with both internal and external customers Ability to think strategically and problem solve Authorized to work for any employer in the United States of America Physical Requirements The employee must occasionally lift and/or move up to 30 pounds. Specific vision abilities required by this job include close vision for physical inspection, hand and eye coordination, depth perception Must be able to stand, walk and sit occasional to frequent. Must be able to work in a dusty environment around metals Hearing - must be able to hear others and warning sounds of forklift and other heavy machinery Speech - must be able to communicate effectively with others while working Smell - must be able to smell various chemicals and gasses Must be able to squat, stoop, twist, climb, crawl, reach, grasp, and fine manipulation, and bend occasional to frequent Key Competencies Innovation Focus - Confident ability to drive change and express and advocate for new ideas and ways of doing things. Willingness to take appropriate business risks, recognizing that to succeed overall, one will occasionally fail. Collaborative Style - Engages stakeholders in problem solving and decision making. Is adept at bringing people together to tackle issues rather than dictate solutions. Has a collegial, inclusive working style and is professional and courteous. Builds strong relationships both internally and externally. Is both confident and humble. Communication Skills - Excellent verbal and written communication skills with the ability to effectively deliver and reinforce consistent messages at all levels. Excellent listening skills. Analytical - collect and enter accurate data Quality Management - Looks for ways to improve and promote quality; Demonstrates accuracy and thoroughness and attention to detail Safety and Security - Observes safety and security procedures

Turbomachinery TechnicianLocation: Kent, WASalary: $46.20/hrIndustry: Aerospace/ManufacturingEmployment Type: 6 month assignment with potential for extension or conversionShift: Monday to Thursday, 3:00pm to 1:30am; Training will be on Day shift, Monday to FridayQualifications:High school diploma or equivalent required; Associate degree preferred.3+ years of experience with assembly of turbomachinery/propulsion systems, aircraft or automotive engines, or other highly technical machinery.5+ years experience in propulsion assembly, integration, and testing preferred.A&P license or equivalent experience in integration and test of propulsion systems preferred.Ability to interpret engineering drawings required.Ability to read and understand technical manuals/detailed work instructions required.Strong mechanical competence with the ability to use hand and power tools required.Ability to accurately use precision measurement and inspection tools required.Demonstrated troubleshooting and problem solving skills required.Knowledge of precision inspection equipment preferred.Experience with critical sealing surface requirements preferred.Experience with thread insert installation and thread tapping tools preferred.Experience operating heavy lifting equipment such as overhead cranes and forklifts on flight hardware preferred.Experience with 3D measurement tools, such as Faro Arms/Trackers and Verisurf software preferred.Knowledge in the use of 3D CAD tools (CREO is preferred), and ability to read and interpret GD&T per ASME Y14.5M-1994 standard preferred.Physical Requirement: climb ladders & stairs, and be able to lift up to 50lbs for limited durations of time.Must be a U.S. citizen or national U.S. permanent resident (current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. Duties:Perform hands-on assembly and maintenance of cutting-edge rocket engine turbomachinery.Share in the team s impact on all aspects of Turbopump assembly, disassembly, testing, and tool/fixture design.Provide critical feedback to make improvements with respect to process control, capability, and repeatability.Precision assembly of rocket engines.Detailed component inspection using calipers, micrometers, etc. to tolerances of 0.0001 .Calculating dimensional stack-ups to control proper assembly of components.Precision rotor balancing.Coordinating hardware processing such as inspection, cleaning, and shipping.Hardware management under critical cleanliness requirements (liquid oxygen service).Safely working with hazardous systems, containing chemicals and/or high pressure.Assist engineers in reviewing design concepts, providing feedback for improvements.Familiarity working with assembly fixture tooling.Review and follow work instructions for complex mechanical installations.Innovate to improve processes and increase efficiency of operations.Additional duties as assigned. EOE/ADA#clearance

Job Title: Engine Integration Technician II - A ShiftCompensation: $42.00 per hourLocation: Onsite - Kent, WASchedule: Monday to Thursday, 5:00 AM - 3:30 PM (A Shift).Technical Skills Needed:Strong mechanical background, preferably in aerospace or automotive mechanics.Experience with precision tooling, especially in aerospace applications.Knowledge and experience with propulsion systems, engines, or turbomachinery highly preferred.3-5 years of mechanical experience, with a preference for candidates closer to 5 years.Responsibilities:Perform hands-on assembly and maintenance of advanced engine turbomachinery.Participate in the assembly, disassembly, testing, and design of tools and fixtures related to turbomachinery.Provide critical feedback to enhance process control, capability, and repeatability.Minimum Qualifications:3+ years of experience with assembly of turbomachinery, propulsion systems, aircraft or automotive engines, or other highly technical machinery.Ability to interpret engineering drawings and understand technical manuals and detailed work instructions.Strong mechanical skills with the ability to use hand and power tools effectively.Demonstrated troubleshooting and problem-solving skills.Ability to maintain positive and professional relationships and contribute to a culture of inclusion.Preferred Qualifications:5+ years' experience in propulsion assembly, integration, and testing.Associate degree in a technical field or equivalent experience.Experience with precision inspection tools and critical sealing surface requirements.A&P license or experience in integration and test of propulsion systems.Experience with 3D measurement tools and CAD software, with a preference for knowledge in GD&T per ASME Y14.5M-1994 standards.Work Authorization Requirements:Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.

Shift: This role is 1st Shift, 5:30 AM-2:00 PMHourly Rate: $32.00 an hourDo you have a taste for food? If you are looking for the opportunity to reach your potential, consider Conagra Brands as your next destination. Conagra Brands is known for our Ionic brands like Reddi-wip, Slim Jim's, Duncan Hines BOOMCHIKPOP, Chef Boyardee, Swiss Miss and more!We are hiring for Maintenance Tech on our 1st shift.You will report to the shift supervisor and join a team of 235 plus team member.You will work onsite at our Food manufacturing plant is located in Kent WA.Essential Functions:Maintain and repair all aspects of production line equipment including cookers, wrappers, conveyors.Will work all craft specialties, including electrical, welding, mechanical, refrigeration, pneumatic and structural.Repair or replaces defective parts on equipment. Dismantles machinery to access part(s) needing repair replaces/repairs defective parts and reassembles machinery. Lubricates and cleans working mechanisms on production equipment.Respond to urgent needs to keep the production lines running.Perform plant inspections on fire systems, storage freezers, refrigeration system, and record information into daily summaries.Perform preventative maintenance work on equipment and ensure completion of work orders.You will work varying hours and shifts, including overtime and weekends, to accommodate the production deadlines.Must maintain regular attendance.Report food safety problems to personnel with authority to initiate action.Other maintenance responsibilities as assigned.Skills and Attributes:Must follow all plant work, safety, food safety, and GMP standards.Meet internal/external customer expectations through teamwork, respect, and a willingness to help and support others.Must maintain a good working relationship with all other departments and other maintenance shifts.Work in temperatures ranging from 125F to +/- 20, averaging 85F.Ability to routinely lift up to 50 lbs. frequently.Communicate to all levels.Job Qualifications2 years previous experience in electrical controls, hydraulics, pneumatic and ammonia refrigeration in a food manufacturing environment.Refrigeration operator's license.High School diploma or equivalentRelevant trade or technical school training preferred.Anticipated Close Date: June 24, 2024Location: Kent, WashingtonOur Benefits:We care about your total well-being and will support you with the following, subject to your location and role:Health: Medical, dental and vision insurance, company-paid life, accident and disability insuranceWealth: great pay, 401(k) and stock purchase planGrowth: online courses, virtual and on-site development experiencesBalance: paid-time offOur Company:Conagra Brands is oneofNorth America's leading branded food companies. Guided by an entrepreneurial spirit, our Company combines a rich heritage of making great food with a sharpened focus on innovation. Our portfolio is evolving to satisfy people's changing food preferences. Our iconic brands, such as Birds Eye,Duncan Hines, Healthy Choice, Marie Callender's, Reddi-wip, and Slim Jim, and emerging brands, including Angie's BOOMCHICKAPOP, Duke's, Earth Balance, Gardein, and Frontera, offer choices for every occasion.We pride ourselves on having the most impactful, energized and inclusive culture in the food industry. For more information, visitwww.conagrabrands.com.Conagra Brandsis an equal opportunity employer and considers qualified applicants for employment without regard to sex, race, color, religion, ethnic or national origin, gender, sexual orientation, gender identity or expression, age, pregnancy, leave status, disability, veteran status, genetic information and/or any other characteristic or status protected by national, federal, state or local law. PDN-9be79338-c192-40b4-aee8-54b0d5459253

Job Title: Turbomachinery Technician Location: Kent, WA 98032 Duration: 06 Months Shift Timing: Shifts available: Weekday Nights - Monday - Thursday (3:00pm - 1:30am). Will need to be able to train on a normal day shift (Monday - Friday) Description: Turbomachinery Technician This role is part of Operations, which is comprised of Integrated Supply Chain, Facilities, and Security. This includes Manufacturing and Supply Chain support across all facilities.As part of a small, passionate, and accomplished team of experts, you will perform hands-on assembly and maintenance of cutting-edge rocket engine turbomachinery. You will share in the team's impact on all aspects of Turbopump assembly, disassembly, testing, and tool/fixture design. You will also provide critical feedback to make improvements with respect to process control, capability, and repeatability.Special MentionsResponsibilities include but are not limited to: Precision assembly of rocket engine turbomachineryDetailed component inspection using calipers, micrometers, etc. to tolerances of 0.0001"Calculating dimensional stack-ups to control proper assembly of componentsPrecision rotor balancingCoordinating hardware processing such as inspection, cleaning, and shippingHardware management under critical cleanliness requirements (liquid oxygen service)Safely working with hazardous systems, containing chemicals and/or high pressureAssist engineers in reviewing design concepts, providing feedback for improvementsFamiliarity working with assembly fixture toolingReview and follow work instructions for complex mechanical installationsInnovate to improve processes and increase efficiency of operationsWe are looking for someone to apply their technical expertise, leadership skills, and commitment to quality to positively impact safe human spaceflight. Passion for our mission and vision is required!Minimum Qualifications 3+ years of experience with assembly of turbomachinery/propulsion systems, aircraft or automotive engines, or other highly technical machinery.Ability to interpret engineering drawings.Ability to read and understand technical manuals/detailed work instructions.Strong mechanical competence with the ability to use hand and power tools.Ability to accurately use precision measurement and inspection toolsDemonstrated troubleshooting and problem solving skills.Ability to earn trust, maintain positive and professional relationships, and contribute to a culture of inclusion.Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Physical Requirements: Climb ladders & stairs and be able to lift up to 50 lbs. for limited durations of time.Preferred Qualifications5+ years' experience in propulsion assembly, integration, and testing.Associate degree in a technical field.Knowledge of precision inspection equipment.Experience with critical sealing surface requirements.Experience with thread insert installation and thread tapping tools.A&P license or equivalent experience in integration and test of propulsion systems.Experience operating heavy lifting equipment such as overhead cranes and forklifts on flight hardware.Experience with 3D measurement tools, such as Faro Arms/Trackers and Verisurf software.Knowledge in the use of 3D CAD tools (CREO is preferred), and ability to read and interpret GD&T per ASME Y14.5M-1994 standard.

Position Title: Forklift Technician Location: Seattle - Kent, WA Position Type: Full Time Job Category: Skilled Labor - Trades Description: POSITION SUMMARY: Repairs and maintains electric, diesel, and gasoline industrial trucks and/or construction equipment by performing the following duties.ESSENTIAL FUNCTIONS Reasonable Accommodations Statement To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Essential Functions Statement(s) Reads work order and observes and listens to truck in operation to determine malfunction/diagnose the problem(s) Offers solutions to meet customer specifications; provide estimates when appropriate.Makes mechanical repairs to equipment after a complete inspection and analysis of breakdown has been completed.Records complete repair description on work order, including the correct model and the serial number of equipment and record hour meter reading.Obtains signature from a customer and communicates with customers on repair needs, or work that was completed.Examines protective guards, loose bolts, and specified safety devices on trucks and makes adjustments.Lubricates moving parts and drives repaired truck to verify conformance to specifications.Represents Equipment Depot to customers. Maintains the professional image of self and cleanliness (externally and internally) of the van at all times.Tracks and schedules with operations, or service manager when service van is due for routine maintenance or has other service-related issues.Works in a manner that protects customers, Equipment Depot, and the public. Returns paperwork to field service coordinator daily. Includes work orders, fuel receipts, sublet invoices, etc.Submits time cards by 9:00 a.m. daily. If the technician is dispatched to a job from home, time must be called in and given to the service administrator over the telephone by 9:00 a.m. daily. Qualifications: SKILLS & ABILITIES Education: High School Graduate or General Education Degree (GED)Experience: One to Three months related experience and/or training – and/or combination of education and experience.Computer Skills: To perform this job successfully, an individual must have knowledge of internet software.Certificates & Licenses: Must have a valid driver’s license and clean driving recordLanguage: Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of an organization.Math: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.Reasoning: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Pay DOE: $27-45/hrWORK ENVIRONMENT Work environment varies from office to job site to industrial locations OUR CORE VALUESPassion to Perform – We are passionate to perform and focus on concrete achievementsTrust to Act – We are empowered to act and act in a powerful wayAct Responsibly – We are responsible for our actions and the consequences they have for our stakeholders and our environmentMake it Fun! – We are serious about making work fun; it’s the way we do thingsAn Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability.The Company has reviewed this job description to ensure that essential functions and basic duties have been included. It is intended to provide guidelines for job expectations and the employee's ability to perform the position described. It is not intended to be construed as an exhaustive list of all functions, responsibilities, skills, and abilities. Additional functions and requirements may be assigned by supervisors as deemed appropriate. This document does not represent a contract of employment, and the Company reserves the right to change this job description and/or assign tasks for the employee to perform, as the Company may deem appropriate.PI240571353

Overview Overview: We are proud to be America's Largest Independent Self-Performing HVAC/R Service Provider. Over the past 30 years, our continued focus on Quality, Value, and Integrity has enabled us to create strong relationships with thousands of long-term customer partners. As we continue to expand, our focus remains on providing a top-notch work experience for our employees. If you are a quality-oriented individual who values integrity and hard work, then we want to talk to you! With our excellent review ratings on both Indeed and Glassdoor, Nextech has become the place to be for those in the HVAC Industry. Come join our team and start moving your career forward!Role: Our HVAC/R Technicians continue to drive our profession, image, and reputation. We are dedicated to providing the highest level of value-added customer service. Our HVAC/R Technicians are committed to performing service repairs, equipment maintenance, and replacements for our customers as needed, 24/7. Hardworking and integrity driven, our technicians make quality repairs in a timely manner, maintain their equipment to the highest standards, and build trusting relationships with our clients.Benefits: Company Vehicle Dispatched from home daily Paid Port to Port Tool Allowance Paid Training Paid Ongoing Training Excellent Health Insurance options including a FREE employee only option Dental, Vision, Accident, Critical Illness, Disability and Supplemental Life Insurance options FREE life insurance equal to your annualized pay rate 401k with a 50% match up to the first 6% of your contributions 7 paid Holidays 2 paid Personal days 10 paid Vacation days Responsibilities Provide the highest level of technical ability, quality, value, and integrity to our customers Install, maintain, and repair heating, ventilation, cooling, and refrigeration units for commercial customers. Diagnose and repair electronic, mechanical, and electrical components of these systems Travel to job sites in service area and work with dispatcher to ensure schedule is maintained and delays are properly communicated to customer Be available to work nights or weekends, on a rotating basis, to service emergency needs of our customers Maintain good working order of company vehicle, equipment, and electronics Maintain stock, parts, tools, and safety equipment in the vehicle Document details of services and parts provided to customers electronically through iPad applications Diagnose diverse service issues, obtain any replacement parts, calibrate system to manufacturer's recommendations, and be able to explain need for and value of recommended solutions Participate in company-provided training opportunities Identify and report potential opportunities for additional business (new unit/ system, PM contracts, and additional services) Qualifications High school diploma, GED or suitable equivalent 2+ years of recent HVAC/R Technician field experience Must live within 30 miles of location of position listed Valid driver's license EPA Certificate Proficient in reading schematics and work plans Knowledge with advance principles of air conditioning, refrigeration, and heating Excellent written, verbal, and interpersonal skills Basic computer skills for iPad and cell phone communication and documentation Ability to work overtime, weekends, or holidays - if needed

Check out this new opportunity!Integration Technician Kent, WAContract PositionWe partner to find talent for the companies that align their values with an employee first focus. Moseley Technical Services has supported the Aerospace, Defense, Commercial, and Government companies for 28 years. Our client's missions are our missions, and we ensure that we match our candidates with clients that will progress their meaningful career. Responsibilities:Provide tactical and technical support to Engineering/Production/Manufacturing by performing activities such as design, test, check-out, modification, fabrication, and assembly of prototype electro/mechanical systems, experimental design circuitry, laser/light transmission devices or specialized test equipment. Application may include electronic circuits, photonics and logic systems. Work from schematics, diagrams, written and verbal descriptions, layouts or defined plans to perform testing, checkout and trouble-shooting functions. Perform operational test and fault isolation on systems and equipment. Assist in determining methods or actions to remedy malfunctions. Assist in the design, construction, test and check-out of test equipment. Use manufacturing, test, development or diagnostic equipment, including, but not limited to, test programs, oscilloscopes, signal generators and specialized test apparatus.Perform general duties involved in the manufacturing, assembling, and testing of valves and controls components for various spaceflight systems.Share in the team's impact on all aspects of component and subassembly manufacturing. Production valve manufacturing team is a critical part of the company's Integrated Supply Chain.Integrate, test, functionally verify, and troubleshoot hydraulic and pneumatically actuated cryogenic valves, systems and components.Perform intermediate and/or depot level component maintenance, inspection, and repair.Assist engineers in reviewing and developing design concepts, tooling, test hardware and providing feedback for improvements.Follow, review, improve and provide feedback on work instructions for complex mechanical systems and installations.Safely work with chemical and/or high-pressure hazardous systems.Ensure tasks are performed on schedule, safely and in a professional manner.Rapidly adapt to changing roles while working in a challenging high-paced work environment.Show Innovation and accountability in the of improvement of processes and the efficiency of operations and the work area.Maintain inventory of parts and equipment for assembly, test, and maintenance of valve related systemsSupport overtime required for integration tasks or test campaigns.Qualifications:2+ years' experience in aerospace, aircraft, R&D or related industrial or defense fields.Strong attention to detail, desire to solve problems, and drive to resolve technical issues.Ability to lift items up to 40 lbs. and use lifting equipment and machinery for heavier hardware.Must possess a strong work ethic, prove ability to follow direction, and meet expectations.Ability to read and interpret engineering drawings and technical manuals.Physically able to climb ladders and stairs.Ability to support one of the following production work schedule: M- TH (5am - 3:30pm)Good verbal and written communication skills and ability to interface with software systems, databases and Microsoft Office Suite.Ability to earn trust, maintain positive and professional relationships, and contribute to a culture of inclusion apply their technical expertise, leadership skills, and commitment to quality to positively impact safe human spaceflightPreferred Qualifications: Experience with cryogenic systems, operation, safety and hardware. Prior experience fabricating, maintaining, testing, operating or inspecting aerospace mechanical components or fluids systems.Experience with CAD systems for review and interpretation of 3-D models.Your RecruiterStill have questions? Reach out toKeith- (phone) (256) 529-4904 (email) [email protected] What to ExpectApplicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.ResourcesTo apply, send resume to: [email protected] more active job openings: http://www.moseleytechnical.comFor more information about Moseley visit: http://www.moseleytechnical.com/about-us/

Modern Machinery has immediate opportunities for a full-time, journey-level, highly motivated, self-directed Heavy Equipment Field Service Technician. Candidates must be well established in the heavy equipment repair and maintenance industry with at least three to five years of experience operating a field service truck. Relocation assistance is available for qualified candidates. The hourly pay range for this position is: $31.70 - $54.00. This is a non-exempt position and is eligible for overtime pay. Job Requirements/Skills: Must demonstrate troubleshooting and analytical problem-solving skills. Must be able to stand for long periods of time along with walking, climbing ladders and stairs, reaching, pulling, leaning, and twisting. Requires a valid driver's class A or B CDL and the ability to maintain an insurable driving record Accurately complete DOT E-Logs and maintain compliance with DOT hours of service. Must be able to work well independently or with others in a team environment. Must be reliable, honest, and have a strong work ethic. Must have strong organizational and time management skills Must be able to effectively communicate both verbally and in writing with customers and co-workers. Must be able to lift up to75 lbs. Must own required tools. Ability to work overtime with minimal notice. Must be able to travel away from home. Strong computer skills. Education/Experience: High School diploma required. Associates or Bachelor's degree in diesel technology or related field preferred and/or an equivalent combination of education and experience Minimum of three to five years of verifiable experience repairing heavy equipment in a field service truck. Prior dealership experience is beneficial. Experience with Komatsu as the primary equipment line is preferred, all others may apply. Pre-employment Testing: This is a safety sensitive position subject to pre-employment testing including cannabis. Demonstrate Modern Machinery's core values and promote the mission and vision of the company. Follow all company policies and regulations for safe work procedures and contribute to the achievement of company safety goals. Independently troubleshoot and repair all systems (electrical, hydraulic, A/C, power train, etc.) on Komatsu and other Modern Machinery affiliated product lines. Operate equipment as needed to assist in locating and diagnosing the failure. Utilize hand and power tools and electronic diagnostic equipment. Read and interpret complex hydraulic and electrical schematics. Perform diagnostic testing and tuning of equipment. Have the experience and ability to determine the extent of the repair and the corrective action required. Follow all safety rules and policies while performing all work assignments as specified in company handbooks. Adhere to any additional customer requirements, safety related and otherwise when working on a customer's site. Asses parts to determine the cause of failure and/or their reusability. Communicate with parts department personnel to order the necessary parts required to complete repair(s). Perform assignments in a variety of environments, including the field, on customer's sites and in the shop. Customer satisfaction is our priority at Modern Machinery; all customer inquiries must be handled promptly and in a professional manner. Effectively communicate to the customer the machine's problem, the intended plan for repair and provide status updates throughout the repair process. Establish strong customer relationships. Work well under pressure and within deadlines while maintaining a positive attitude. Ensure the assigned field service truck is appropriately maintained and kept clean. Complete and submit assigned work order reports, time entry and all other paperwork on company provided laptop daily. When appropriate compile any additional documentation necessary for completeness. Assist other technicians on large repairs or projects. Attend and participate in appropriate training(s). The responsibilities described above are the general nature and levels of work performed but are not intended to be a complete comprehensive list of all the duties, activities, and responsibilities required of job incumbents. Responsibilities, duties, and activities may change at any time with or without notice.

This is a great opportunity for an individual who enjoys working in a fast-paced and team environment. As a Welder Technician, you must be well established in the heavy equipment repair and maintenance industry, and will be responsible to produce custom, high-quality, construction, crushing and screening equipment for the aggregate industry. The hourly pay range for this position is: $30.00 - $38.00. This is a non-exempt position and is eligible for overtime pay. Required Skills/Job Requirements:Must demonstrate troubleshooting and analytical problem-solving skills.Must be able to stand for long periods of time along with walking, climbing ladders and stairs, reaching, pulling, leaning, and twisting.Must be able to work well independently or with others in a team environment.Must be reliable, honest, and have a strong work ethic.Must have strong organizational and time management skills.Must be able to effectively communicate both verbally and in writing with supervisors and co-workers.Must be able to lift 75 lbs.Must own required tools.Ability to work overtime with minimal notice.Must be able to travel away from home if needed.Strong computer skills.Education and Experience:High School diploma required. Associates or bachelor's degree in diesel technology or related field preferred and/or an equivalent combination of education and experience.Minimum of two to three years of verifiable experience repairing heavy equipment.Welding experience with SMAW, MIG, Oxy-Acetylene cutting. Plasma cutting and some air arc experience is required.Proficient in Microsoft Office products (Outlook, Word, and Excel).Pre-employment Testing: This is a safety sensitive position subject to pre-employment testing including cannabis. Demonstrate Modern Machinery's core values and promote the mission and vision of the company. Follow all company policies and regulations for safe work procedures and contribute to the achievement of company safety goals. On average 50% of your time should be spent on welding and 50% on building machines systems (electrical, hydraulic.) on Komatsu and other Modern Machinery affiliated product lines. The expectation is that you communicate effectively with your team. In conjunction with your supervisor, engineering project lead, the following is expected:Operate equipment as needed to assist in building machines.Utilize hand and power tools to build machines. Read and interpret complex hydraulic and electrical schematics.Follow all safety rules and policies while performing all work assignments as specified in company handbooks.Assess parts to determine what is needed for build job Communicate with parts department personnel to order the necessary parts required to complete machine build.Customer satisfaction is our priority at Modern Machinery; all customer inquiries must be handled promptly and in a professional manner.Ensure all welds are inspected, weld repairs executed, and cleanup is complete before painters start painting.Ensuring all assembly work is completed to specifications.Ensure all bolts are tight.Gearboxes are filled with oil.Test run and track all belts.Attends training sessions and meeting as required.Establish, promote, and ensure an outstanding level of customer service to internal and external customers.Ability to perform other job-related duties as assigned. The responsibilities described above are the general nature and levels of work performed but are not intended to be a complete comprehensive list of all the duties, activities, and responsibilities required of job incumbents. Responsibilities, duties, and activities may change at any time with or without notice.