Test Technician Salary in USA

Eurofins MET Laboratories is searching for a Test Technician in Baltimore, MD. Eurofins MET Laboratories, Inc. is one of the Nation's leading laboratories for the testing and certification of electronic and electrical products. We are a Nationally Recognized Testing Laboratory (NRTL) and have been serving clients for over 50 years. Our Union City, CA location is currently seeking an entry level Electrical Engineer, a dedicated team player, who we can train to perform TELECOM testing. Test Technician responsibilities include, but are not limited to, the following : • Review and schedule daily tasks that are assigned by Engineers or Manager • Prepare test equipment for proper operation and verify calibration • Understand the operation of the equipment under test • Setup tests in accordance with work instructions/standards and/or Test Engineer's instruction • Complete data sheets and take pictures of test setup • Manage project documentation in accordance with training • Monitor test, as needed • Collect and review the accuracy of test data • Unpack, store, control, repack customer equipment. • Build and repair test equipment. • Interface with and update Engineers and Manager on status of projects. • Some fabrication/machining work. • Responsible for the organization and clean-up of work station and the environmental laboratory, including putting away tools, storing customer equipment and sweeping. • Provide schedules and timely responses to the engineering staff. • Maintain METrak (RFB, task status, project review, etc.) • Perform in house calibration, measurement uncertainty budgets and calculation in accordance with ISO 17065. • Perform function checks on equipment returned from calibration (or outside the depts. possession) • Other duties as deemed appropriate by management and for which management believes adequate experience exists, or for which knowledge can be easily obtained in order to perform such duties. • Support department objectives and company goals • Be a team player • Sustain a positive, enthusiastic and professional attitude at all times • Accommodate requests with a smile and "can do" attitude • Adhere to manager directives • Maintain a professional appearance and demeanor • Arrive on time, properly dressed and prepared to work • Perform all duties in a timely, accurate, honest and professional manner • Communicate with customers professionally and in accordance with customer service standards • Be respectful of others The ideal candidate would possess : • Ability to maintain confidentially • Needs to be receptive to and accepting guidance from others • Ability to deal with difficult people and problems • Able to work well in a team environment • Able to work in a diverse group of people • Attention to detail • Willing to work overtime as necessary • Ability to multi-task and prioritize assignments • Perform other duties as assigned • Travel as needed Basic Minimum Qualifications : • College Degree or 4 years of related experience • Clean driving record • Able to stand or sit for long periods of time • Able to lift up to 30 pounds • Ability to climb ladders and use scissor lifts to mount devices, such as antennas • Ability to safely use power tools and perform light machining • Authorization to work in the United States indefinitely without restriction or sponsorship Position is full-time, Monday-Friday, 8:30 a.m.-5 p.m., with overtime as needed. Candidates currently living within a commutable distance of Baltimore, MD are encouraged to apply. As a Eurofins employee, you will become part of a company that has received national recognition as a great place to work. We offer excellent full-time benefits including comprehensive medical coverage, life and disability insurance, 401(k) with company match, paid holidays and vacation, personal days, and dental and vision options. To learn more about Eurofins, please explore our website www.eurofinsus.com . Eurofins is a M/F, Disabled, and Veteran Equal Employment Opportunity and Affirmative Action employer.

Company DescriptionEurofins Scientific is an international life sciences company, providing a unique range of analytical testing services to clients across multiple industries, to make life and our environment safer, healthier and more sustainable. From the food you eat, to the water you drink, to the medicines you rely on, Eurofins works with the biggest companies in the world to ensure the products they supply are safe, their ingredients are authentic and labelling is accurate.Eurofins is the global leader in food, environment, pharmaceutical and cosmetic product testing and in agroscience Contract Research Organisation services. Eurofins is one of the market leaders in certain testing and laboratory services for genomics, discovery pharmacology, forensics, advanced material sciences and in the support of clinical studies, as well as having an emerging global presence in Contract Development and Manufacturing Organisations. The Group also has a rapidly developing presence in highly specialised and molecular clinical diagnostic testing and in-vitro diagnostic products.In over just 30 years, Eurofins has grown from one laboratory in Nantes, France to 55,000 staff across a decentralised and entrepreneurial network of 900 laboratories in over 50 countries. Eurofins offers a portfolio of over 200,000 analytical methods to evaluate the safety, identity, composition, authenticity, origin, traceability and purity of biological substances and products.In 2020, Eurofins generated total revenues of EUR € 5.4 billion, and has been among the best performing stocks in Europe over the past 20 years.Job DescriptionEmployee Standards:Support department objectives and company goalsBe a team playerSustain a positive, enthusiastic and professional attitude at all timesAccommodate requests with a smile and "can do" attitudeAdhere to manager directivesMaintain a professional appearance and demeanorArrive on time, properly dressed and prepared to workPerform all duties in a timely, accurate, honest and professional mannerCommunicate with customers professionally and in accordance with customer service standardsBe respectful of othersTasks/Responsibilities:Efficiently conduct testing, such as input current, heat rise, leakage current, electric strength, stored energy (mains plug), mechanical strength and marking durability.Interpret test plan, provided by EngineerEfficiently interface with Project Engineer and Lab Manager.Plan and schedule each testTasks/Responsibilities:Efficiently conduct testing, such as input current, heat rise, leakage current, electric strength, stored energy (mains plug), mechanical strength and marking durability.Interpret test plan, provided by Engineer• Efficiently interface with Project Engineer and Lab Manager.• Plan and schedule each testQualificationsFour-year college degree in electrical engineering discipline or equivalent experienceAbility to work in a fast-paced environmentExceptional communication skillsAbility to maintain confidentiallyNeeds to be receptive to and accepting guidance from othersAbility to deal with difficult people and problemsAble to work well in a team environmentAble to work in a diverse group of peopleAttention to detailWilling to work overtime as necessaryAbility to multi-task and prioritize assignmentsPerform other duties as assignedTravel as neededAdditional InformationExcellent full time benefits including comprehensive medical coverage, dental, and vision optionsLife and disability insurance401(k) with company matchPaid vacation and holidaysBASIC HOURS: Monday - Friday8:30 am -5:00 pmEurofins is aM/F, Disabled, and Veteran Equal Employment Opportunity and Affirmative Action employer.

What will you do? This position will be responsible for product testing on specific assigned PCS (Power Control Systems) units and ensure that it is fully tested in accordance with ASCO procedures and standard industry practices testing the individual PCS sections, interconnecting the sections and testing the systems and the control programs. Also responsible to demonstrate the assigned PCS switchgear for customers during onsite witness tests. Position includes hands-on testing and troubleshooting with testers and design engineers. Test, troubleshoot, correct and document wiring and functional problems in accordance with the wiring diagram. Setup and perform PCS testing based on Sequence of Operation. Interface with both production and engineering personnel to properly record and correct both physical and design nonconformance issues. Configure and test PLC's (Programmable Logic Controller) and power management networks. Upload firmware and download parameters to control modules and other electronic components. Set up electronic components and protective relays per vendor manuals. Develop and build test simulations for customized PCS switchgear. Serve as "technical" point person for test group on an assigned PCS unit In order to meet customer demands, the position is subject to daily and weekend overtime to complete PCS Projects. Position works within standard PCS operating procedures and guidelines. Position requires a moderate degree of supervision. Promote a safe work environment. Performs other duties as assigned by supervisor. QUALIFICATIONS: Knowledge of electrical principals and power management. Ability to read and follow schematics of complex electrical and mechanical circuits. Knowledge of PLC interface and WonderWare programming strongly preferred. Computer programming and networking skills are a strong plus. 2-year Associates Degree in Power, Electronics, Computer Networking with 2-3 years relative experience; or 4 years of Military Training in Power, Electronics or Computer Networking. What's in it for me? Paid Holidays and PTO Program Employee Recognition Rewards Company Matching Personal Charitable Donations Safety Shoe and Safety Prescription Glasses Voucher Program Tuition Reimbursement for Qualifying Programs Company Discount Portal Basic Life and AD&D Insurance provided by Company Well-being Program providing the ability to earn rewards 401(k) + Company Match Schneider Electric offers a robust benefits package to support our employees such as flexible work arrangements, paid family leave,401(k)+ match, and more. Click here to find out more about working with us: http://se.com/us/careersWhy us?\r\n\r\nSchneider Electric is leading the digital transformation of energy management and automation. Our technologies enable the world to use energy in a safe, efficient and sustainable manner. We strive to promote a global economy that is both ecologically viable and highly productive.\r\n\r\n\r\n\r\n\r\n�25.7bn global revenue\r\n\r\n137 000+ employees in 100+ countries\r\n\r\n45% of revenue from IoT\r\n\r\n5% of revenue devoted for R&D\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\nYou must submit an online application to be considered for any position with us. This position will be posted until filled What will you do? This position will be responsible for product testing on specific assigned PCS (Power Control Systems) units and ensure that it is fully tested in accordance with ASCO procedures and standard industry practices testing the individual PCS sections, interconnecting the sections and testing the systems and the control programs. Also responsible to demonstrate the assigned PCS switchgear for customers during onsite witness tests. Position includes hands-on testing and troubleshooting with testers and design engineers. Test, troubleshoot, correct and document wiring and functional problems in accordance with the wiring diagram. Setup and perform PCS testing based on Sequence of Operation. Interface with both production and engineering personnel to properly record and correct both physical and design nonconformance issues. Configure and test PLC's (Programmable Logic Controller) and power management networks. Upload firmware and download parameters to control modules and other electronic components. Set up electronic components and protective relays per vendor manuals. Develop and build test simulations for customized PCS switchgear. Serve as "technical" point person for test group on an assigned PCS unit In order to meet customer demands, the position is subject to daily and weekend overtime to complete PCS Projects. Position works within standard PCS operating procedures and guidelines. Position requires a moderate degree of supervision. Promote a safe work environment. Performs other duties as assigned by supervisor. QUALIFICATIONS: Knowledge of electrical principals and power management. Ability to read and follow schematics of complex electrical and mechanical circuits. Knowledge of PLC interface and WonderWare programming strongly preferred. Computer programming and networking skills are a strong plus. 2-year Associates Degree in Power, Electronics, Computer Networking with 2-3 years relative experience; or 4 years of Military Training in Power, Electronics or Computer Networking.

Test Technicianlocation: San Diego, CA 92131pay: 19-26/hr DOEM-F 8am-5pmtemp to hire, possibility to be direct hireJob SummaryPerforms routine tests of circuits, instruments and mechanical assemblies to ensure unit functions according to specifications or to determine cause of failure. Essential DutiesReads test schedule, work orders, test manuals, performance specifications to determine testing procedure and equipment to be used.Sets up devices using hand tools or automatic test methods.Documents test results.Maintain logs and records indicating if there is a malfunction.May perform simple repairs and/or component removal or replacement.Testing and calibrating instruments.Performs go/no-go tests of circuits, components, instruments and mechanical assemblies.Sets up test devices using hand tools or automatic tests methods. Document test results.May perform simple repairs and/or component removal or replacement.May maintain logs and records indicating malfunctions.Must have good written and verbal communication skills.Qualifications & Requirementshigh school diploma5 years of directly related experience and/or training; or equivalent combination of education and experience.Requires intermediate level experience in simple repairs or component replacement.Must be able to proficiently communicate both verbally and in writing. -Must be able to proficiently add, subtract, multiply, and divide.Must have experience and demonstrate proficiency with electronic equipment (Oscilloscope's and Muti-Meter)Working knowledge of established drawings and experience in soldering, wire wrapping and cable harnessing.Working knowledge/experience of BOM's, schematics, engineering drawings.Must be able to proficiently utilize standard hand tools such as but not limited to screwdrivers, pliers, wrenches, and crimpers.All qualified applicants will receive consideration for employment without regard to race, color, national origin, age, ancestry, religion, sex, sexual orientation, gender identity, gender expression, marital status, disability, medical condition, genetic information, pregnancy, or military or veteran status. We consider all qualified applicants, including those with criminal histories, in a manner consistent with state and local laws, including the City of Los Angeles' Fair Chance Initiative for Hiring Ordinance.

Samtec, Inc.Samtec is seeking a Test Technician for our facility in Colorado Springs. This is a second shift position.Hours are Monday through Friday 2:30 PM to 11:00 PMThe hourly range for this position is $20.00 to $25.00 per hour plus shift differential and applicable bonuses and is commensurate with experience.Samtec mayconsider internal candidates based on core skills versus direct experience, but with the understanding that the associate would need to be developed into the role and that rate would be adjusted gradually into the range based on the growth trajectory.Standard benefit offerings available are medical (HSA/PPO), dental, vision, group life, AD&D, short and long term disability, PTO, vacation, EAP, 401k, other voluntary options along with a collaborative work environment and supportive company culture.The DC Test Technicianwill be expected to operate, maintain, and coordinate Optics assembly and testing processes. This is a hands-on position which requires processing orders, preparing test samples, collecting test and process characterization data. This position will work closely with our engineering group to develop/refine test and assembly processes.Application Deadline: June 21stEssential Functions/ResponsibilitiesOperates, maintains testers and related support equipment with minimal engineering direction.Read and interpret test results.Assists with managing production work flow through.Provides written pass downs to facilitate efficient transition between shifts.Collects test and process characterization data.Executes process equipment qualifications, documenting results and recommendations.Collaborates with engineering to define document developed test/assembly processes.Will assist with associate training of testing and assembly processes and equipment as required.The responsibilities as defined are intended to serve as a general guideline for this position. Associates may be asked to perform additional tasks depending on strengths and capabilities.Required ExperienceExperience working in a process/product development environment and/or or direct hands-on experience with semiconductor or IC packaging equipment, and or test preferred.Familiarity with clean room floor operating protocols, equipment and processes.Testing, troubleshooting and maintaining of microelectronic device test equipment preferred.Knowledge of package design, microelectronics assembly practices and associated equipment desired.Experience working with fiber optics.Reading and interpreting test results.Must be proficient with Microsoft Office (word, excel, ppt).Preferred EducationTechnical degree in related field.Training requiredOn the job training as appropriate.SAMTEC, Inc. is an Equal Opportunity Employer and committed to creating a diverse environment. All employment decisions at Samtec are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, pregnancy or parental status, age, disability, sexual orientation, gender and/or gender identity/expression, marital status, past or present military service, family medical history or genetic information, or any other status protected by applicable laws.PI238417727

Location: Salt Lake City, United States of AmericaThales people architect solutions that are relied upon to deliver operational advantage at every decisive moment throughout the mission. Defence and armed forces customers rely on us to deliver the full range of defensive systems for land, sea, and air. From early warning, to threat neutralisation, our platforms cover all levels from very short-range systems, to extended protection across the entire battle-space including Airspace Mobility Solutions, Vehicles and Tactical Systems and Missile Defence, Optronics, and Radar.Test TechnicianSalt Lake City, Utah (Onsite)Position SummaryThales is looking for a Test Technician who will be responsible for performing acceptance testing and diagnostic troubleshooting on electronic and RF-based equipment.In this position you will have full responsibility of acceptance testing activities for one or more product lines per released procedures.  Key Areas of ResponsibilityAdapts to different test levels from lower level assemblies (Digital, Analog and RF) to box and system level.Works from schematics, diagrams, written and verbal descriptions, layouts or defined plans from Engineering to perform routine testing, check-out and troubleshooting functions.Performs routine operational tests and fault isolation on systems and equipment to ensure conformance with final product specifications.Calibrate and align RF and digital circuit as required per Acceptance Test Procedure (ATP).Diagnoses and isolates malfunctions down to component level and conducts repairs if instructed.Conducts defined tests and collects data as assigned. Performs final verification of product and paperwork associate with the final product. Able to work with PCs and applications such as MS Windows suite and other related software.Minimum QualificationsHigh school diploma or GED with a minimum of 2 (two) years technical or vocational education in electronics and communications or a minimum of at least four (4) years of relevant work experience in the requested subject of expertise. Minimum of two (2) years of experience in testing electrical components/equipment, with proficiency in operating testing equipment such as oscilloscopes, multimeters, and other relevant tools.Familiarity with programming and test programming is preferred.Proficiency in soldering skills for electrical components is required.Ability to pass the IPC and/or J STD certification courses is necessary. While training and certification can be provided, prior knowledge and experience in these standards would be advantageous.Must be able to read and understand electronic schematics and mechanical blue prints. Great with numbers, detail oriented and strong organizational skills. Self-motivated, critical thinker with strong technical background. Excellent verbal and written communication skills.Must be a US Person as defined in applicable law. Must be a U.S. Person as defined in applicable law, or otherwise authorized or eligible for authorization, to access to hardware, software, technology or technical data controlled under the International Traffic in Arms Regulations (ITAR) and/or the Export Administration Regulations (EAR).Special Position RequirementsSchedule: 9/80 or 5/40 work schedules available.Travel: Travel may be required on occasion, anticipated to be less than 5% domestic travel annually.If you’re excited about working with Thales, but not meeting the requirements for this position, we encourage you to join our Talent Community!What We OfferThales provides an extensive benefits program for all full-time employees working 30 or more hours per week and their eligible dependents, including the following: Elective Health and Dental plans. Retirement Savings Plan with a company contribution and a match, and without vesting period. Company paid holidays, vacation days, and paid sick leave. Company provided Life Insurance.Why Join Us?Say HI and learn more about working at Thales click here.#LI-Onsite#LI-MR1This position will require successfully completing a post-offer background check. Qualified candidates with (a) criminal history will be considered and are not automatically disqualified, consistent with federal law, state law, and local ordinances.Successful applicant must comply with federal contractor vaccine mandate requirements.Thales champions inclusion and we believe diversity strengthens the fabric of our culture. We are an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law.If you need an accommodation or assistance in order to apply for a position with Thales, please contact us at [email protected].

Test Technician Leesburg, VA Job Description/Functions: Functionally tests and/or calibrates production assemblies Performs functional testing using written test procedures provide by Engineering and/or the customer Performs calibration of EIT proprietary product Performs basic troubleshooting on assemblies that do not pass tests Qualifications Required/Job Specifications Included: High School Diploma or GED required 2 years similar position Basic Electronics and trouble-shooting skills Demonstrated knowledge and application of applicable ISO processes Ability to work in a team environment

Test Technician Danville, VA Job Description/Functions: Functionally tests and/or calibrates production assemblies Performs functional testing using written test procedures provide by Engineering and/or the customer Performs calibration of EIT proprietary products Performs basic troubleshooting on assemblies that do not pass tests Qualifications Required/Job Specifications Included: High School Diploma or GED required Two years similar position Basic Electronics and trouble-shooting skills Demonstrated knowledge and application of applicable ISO processes Ability to work in a team environment

This job will provide you with an opportunity to further your career alongside some of the best and most passionate technology experts from around the world in a leading company within the test, measurement and data analytics industry. You will be a strong contributor collaborating closely with colleagues from various business functions.At HBK, we live up to our three values: Be True, Own It and Aim High. We believe in absolute integrity - it's how we win for stakeholders, the environment and each other. We believe in teamwork and keeping our promises - to ourselves and others. Finally, we believe in being bold and positive. This is how we perform at our best and achieve greater success.Performs pre-calibration and calibration duties per the product specificationsUtilizes specialized pre-calibration softwareAll work reviewed and certified by minimum Calibration Technician III or HigherPerforms error free production testing in an assigned area with limited cross functional interfaceMeasures and records data per work instruction requirements and document nonconformanceProvides daily support to meet the production demandMaintains a clean and safe work environmentAssists other Calibration Technicians and other departments, on an as needed basisKnowledge and Skill RequirementHigh school diploma or equivalent Must be accurate and organized with high attention to detailGood communication, reading, writing, and math skillsKnowledge of electronic principals Salary Range$18.00 - $21.50 per hourITAR RequirementsThis position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e., 'Green Card Holder'), Political Asylee, or Refugee.Equal Employment OpportunityDytran Instruments, Inc. is an Equal Opportunity/Affirmative Action Employer. All decisions regarding recruiting, screening, hiring, training, promotion, transfer, pay, training, benefits, and other conditions of employment will be made based on valid job qualifications and business reasons. All such decisions will be made without regard to race, color, religion, religious dress practice, religious grooming practice, creed, sex, national origin, age, disability, marital status, pregnancy, sexual orientation, citizenship, gender identity, veteran status, or any other protected class by federal, state, or local law. This includes consideration of qualified applicants with criminal histories consistent with City of Los Angeles Fair Chance Hiring Ordinance.

Technician I Intertek, a leading provider of ATIC (Assurance, Testing, Inspection, Certification) Services is looking for an Entry Level Technician to join our Plastics Testing Lab at Pittsfield, MA. This individual will be a critical member of our operations team responsible for providing a diverse range of plastics testing and characterization services to global polymer manufacturers, compounders, fabricators, and end-users. Our Value Proposition Intertek's Transportation Technologies group offer a salary and benefits package competitively placed within the local market, including medical, dental, vision, life, disability, 401(k) with company match, tuition reimbursement and more. In addition to our comprehensive benefits package, we offer: Day to day variety with the ability to work on high profile projects Flexible work schedule Work in a great location near Berkshire Mountains Opportunity for growth (over 100 locations with opportunity for growth/advancement/relocation) Employee referral bonuses What you'll do:Under immediate supervision, this position is an entry level position responsible for performing standard tests related to the characterization of plastics according to standardized test methods. Equipment and test methods are specified, and routine procedures are followed. Prepare and setup test equipment in proper sequence, to include use of notebooks where applicable, to obtain proper operation. Ask for required checks and project proofs during testing. Perform tests for data as requested by the customer. Record data and write reports in standardized formats. Report any observations, for example inconsistent data, to management. Performing other work as required. What it takes to be successful in this role: High school diploma or GED and 1+ year of relevant experience or the equivalent in terms of education, experience and training. Injection molding experience a plus KNOWLEDGE, SKILLS and ABILITIES Ability to utilize basic shop equipment and various hand tools Ability to review, understand, and convey technical information in an effective manner Ability to apply common-sense understanding to carry out test instructions Ability to deal with standard testing situations with only occasional or no variables Ability to work in a fast-paced, multi-tasking environment Strong communication skills, in both verbal and written formats Must be quality driven and customer focused. Microsoft Office software proficiency, including Word, Excel and Outlook Why work at Intertek?Intertek is a world leader in the $250 billion Quality Assurance market, with a proven, high-quality business model and a global network of customer-focused operations and highly engaged subject matter experts. At Intertek, we exercise our spirit of innovation, the passion of our people and our unmatched customer commitment to realize our purpose of making the world an ever better, safer, and more sustainable place for all. Learn more about Our History and What We Do .What we have to offer:When Working with Intertek , you can expect salary and benefit package competitively placed within the local market, including medical, dental, vision, life, disability, 401(k) with company match, tuition reimbursement and more.Intertek is a drug-free workplace. As a condition of employment, all hires are required to pass a pre-employment drug test.Intertek believes that Our People are our strongest tool for success. We are an Equal Opportunity Employer and do not discriminate against applicants due to veteran status or on the basis of disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, or gender identity.For individuals with disabilities who would like to request an accommodation, or who need assistance applying, please email [email protected] or call 1-877-694-8543 (option #5) to speak with a member of the HR Department.CA-TT#LI-JC1Intertek is a leading Total Quality Assurance provider to industries worldwide. Our network of more than 1,000 laboratories and offices in more than 100 countries, delivers innovative and bespoke Assurance, Testing, Inspection and Certification (ATIC) solutions for our customers' operations and supply chains. Working at Intertek means joining a global network of state-of-the-art facilities and passionate people who deliver superior customer service with a purpose of bringing quality, safety, and sustainability to life.