Engineering/Architecture Salary in Redmond, WA

DESCRIPTIONProject Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and under-served communities around the world. We are looking for Software Development Engineer to help us build this service from the ground up.Key job responsibilities* Define, build, test, and support infrastructure to automate ground systems hardware Integration & Test activities at scale* Leverage AWS to develop solutions that bridge the gap between ground systems suppliers and internal backend systems* Own the full software development lifecycle, including design, testing and integration with other Kuiper systemsThis role will be part of the Software and Algorithms (SWALG) team, part of Ground Systems Engineering. SWALG is responsible for:* Design, development, deployment, and support of a tier 1 Monitoring and Remediation System (MARS) needed to maintain high availability of hundreds of ground terminals deployed around the world.* Ground systems integration/test (I&T) automation* Ground terminal configuration, provisioning, and acceptance automation* Systems analysis* Algorithm development (pointing/tracking/calibration/monitoring)* Software interface definition for supplier-provided hardware and development of software test automation* Definition of use cases/requirements needed to drive ground modem software developmentExport Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the lifeIn this role as a Software Development Engineer, you will design, implement, optimize, and operate systems critical to the uptime and performance of Kuiper ground terminals. Your contributions will have a direct impact on customers around the world.About the teamThe Kuiper Ground Systems Engineering team is responsible for the development, deployment, and long-term performance optimization of Kuiper satellite ground terminals located around the world (Gateway and Telemetry, Tracking, and Command (TT&C)). Ground terminals include full-motion parabolic antennas, radio frequency spectrum monitoring, terminal monitoring and control, and fault management systems. These software-driven distributed systems form the communications backbone for the Kuiper constellation and must provide the world-class reliability, uptime, and performance our customers expect from Amazon.We are open to hiring candidates to work out of one of the following locations:Redmond, WA, USABASIC QUALIFICATIONS- 3+ years of non-internship professional software development experience- 2+ years of non-internship design or architecture (design patterns, reliability and scaling) of new and existing systems experience- Experience programming with at least one software programming languagePREFERRED QUALIFICATIONS- 3+ years of full software development life cycle, including coding standards, code reviews, source control management, build processes, testing, and operations experience- Bachelor's degree in computer science or equivalent- Experience using AWS and Python is a plusAmazon is committed to a diverse and inclusive workplace. Amazon is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status. For individuals with disabilities who would like to request an accommodation, please visit https://www.amazon.jobs/en/disability/us.Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $115,000/year in our lowest geographic market up to $223,600/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit https://www.aboutamazon.com/workplace/employee-benefits. Applicants should apply via our internal or external career site.

DESCRIPTIONAre you interested in designing and building infrastructure to support leading edge technology in satellite communications? If the answer is yes, then the Project Kuiper team has an exciting opportunity for you.Amazon has created some of the most game changing technologies in the world and Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.As a Site Civil Engineer on the Ground Systems Site Engineering team, you will be responsible for the design of overall site infrastructure of Kuiper Ground Gateways and Telemetry, Tracking, and Control (TT&C) antenna sites. Key job responsibilities• Review and aid in the development of hosting requirements (specifications) for gateway sites• Assist in the review of proposed gateway sites to determine their suitability for Amazon’s use• Assist the site acquisitions team by conducting site surveys if required • Provide technical leadership and oversight during the design and construction of globally located ground gateway sites• Review and approve site specific drawings and analysis submitted by local architectural and engineering vendors for domestic and international locations to include: Geotechnical and Topographical surveys; preliminary/conceptual designs; site power and fiber infrastructure including grounding and lightning protection; equipment foundations, site grading and access roads; and perimeter security fencing.• Conduct onsite inspections during construction to ensure compliance with approved drawings• Define remediation plans for deficiencies found during and after construction• Support the development of infrastructure acceptance test activities• Support the creation and maintenance of as-built drawing packages for the global gateway sitesExport Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the lifeAs a Site Civil Engineer on the Ground Systems Site Engineering team, you will be responsible for the design of overall site infrastructure of Kuiper Ground Gateways and Telemetry, Tracking, and Control (TT&C) antenna sites. You will provide engineering support from conceptual design to overseeing the design, inspection, and test of the infrastructure for globally located Kuiper Ground Gateway and TT&C sites. Additionally, you will be responsible for working with the site acquisitions team to establish the suitability of proposed sites for Amazon’s use, working with the sustainability team to identify and implement renewable solutions.About the teamThe Site Enginnering team is part of the Ground Systems team responsible for the architecture, design, build, and installation of Kuiper’s Ground Gateways and TT&C Antennas. Our Ground Gateways enable high data rate, low latency communications between Kuiper points of presence (PoP) and our Low Earth Orbit Satellite constellation. TT&C Antennas support satellite Launch and Early Orbit enabling command and control of the satellites during this critical phase. The team works closely with the Site Construction, Networks, Regulatory, Payload Test, and RF Systems teams to ensure Kuiper provides a seamless customer experience.We are open to hiring candidates to work out of one of the following locations:Arlington, VA, USA | Austin, TX, USA | Redmond, WA, USA | San Diego, CA, USABASIC QUALIFICATIONS- Bachelor’s degree in civil engineering or a related field from an accredited program- Minimum of 5 years of experience in civil/site engineering and design- Documented experience with foundation design, geotechnical engineering, grading and drainage, utilitiesPREFERRED QUALIFICATIONS- Ground Gateway (teleport) or data center design and/or construction experience- Ability to interpret geotechnical reports and design infrastructure including foundations in various climates accordingly- Strong sense of ethics and ability to work collaboratively as a member of a highly motivated team who insists on the highest standards and deliver systems which delight customers- Master’s Degree in civil engineering with a focus on structural analysis or geotechnical engineering- Experience with analysis software (MathCAD, STAAD, RAM, Visual Analysis, HiltiProfis Engineering Suite, etc.)- Licensed professional engineer- Knowledge of CAD tools, such as AutoCAD and Revit- Ability to read, interpret and apply codes and standards to design- Familiarity with interpreting international building codes and past design experience with IBC 2021- Field and international experience dealing with various standards, construction regulations, and bylaws- Understanding of codes and regulatory requirements for design- Understanding of steel, concrete, and masonry design practices in various climate zones- Ability to produce complete construction drawings and documents with little oversight- Familiarity with SmartSheet and managing contractors and vendors within the designated software mediums- Experience with Microsoft Office applications (e.g., Word, Excel, Project, and PowerPoint)Amazon is committed to a diverse and inclusive workplace. Amazon is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status. For individuals with disabilities who would like to request an accommodation, please visit https://www.amazon.jobs/en/disability/us.Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $93,900/year in our lowest geographic market up to $185,000/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit https://www.aboutamazon.com/workplace/employee-benefits. Applicants should apply via our internal or external career site.

Meta Reality Labs - Research (RL-R) is dedicated to the research and development required to bring virtual and augmented reality to billions of people around the world. At the Codec Avatar lab, we aspire to a vision of social VR and AR, where people are able to interact with each other across distances in a way that is indistinguishable from in-person interactions.RL-R is seeking a self-motivated leader to join our team as a Hardware Engineering Manager. In this role, you will support a world-class, multi-disciplinary team of researchers, engineers, and technicians. Your primary responsibility will be to lead our electrical engineers and embedded software engineers to enable progress towards authentic social presence.You will work cross-functionally with teams that will dynamically change depending on the problem and potentially include mechanical, optical, systems, software, project management, and research experts. We want people who work well in teams, can brainstorm new solutions, work in new technology areas, are able to drive a concept into prototypes and then mature systems for both small- and large-scale data captures. This role will focus on guiding career growth in your team, establishing and tracking goals for highly ambiguous programs, and managing priorities and resources on projects. Hardware Engineering Manager, Electrical & Embedded SW Responsibilities: Manage a team of Electrical and Embedded Software Engineers tasked with the development of hardware and systems, guided by research-led outputsIdentify essential roles for the team's success and recruit top-tier engineering talentProvide the team with guidance, consistent feedback, education, and mentorshipDevelop career progression plans, manage performance, and conduct performance reviewsHandle a diverse range of stakeholders while defining processes for your teamFacilitate the integration of new technologies into research prototypesConduct architecture and design reviews to ensure the quality of hardware and embedded systemsCollaborate with various engineering disciplines in a team settingEffectively persuade leaders and key partners to achieve alignmentDevelop a flexible set of processes that balance engineering rigor with speed, and establish mechanisms for its appropriate applicationCollaborate with cross-functional engineering managers and architects on hardware and software integrationEncourage collaboration among internal RL-R Pittsburgh-based teams, promoting teamwork, and shared problem-solving to achieve common objectives Minimum Qualifications:BS or higher education in Electrical, Software, or Computer Systems Engineering8+ years of experience with system-level design including circuit design, system bring-up, integration, debug8+ Experience with embedded software design and programming in C/C++ for development, debugging, testing and performance analysis5+ years experience managing a team of Electrical Engineers and Embedded SW EngineersDemonstrated cross-functional collaboration working with engineers, SW architecture, and other hardware/software functions delivering complex systems Preferred Qualifications:Experience in working with external vendors for manufacturing and designExperience with SoC, RF (WiFi/BT), batteries, audio, sensors integration, displays, custom ASIC/silicon, camera sensors, and high speed I/OFamiliarity with MCAD tools like SolidWorks & Siemens NX and ECAD tools like Cadence and/or Altium DesignerExperience with wireless and wired communication protocols,TCP/IP, Ethernet, Bluetooth and 802.11Experience leading and driving electrical design development from schematic capture, PCB layout through assemblyExperience with digital circuit design and embedded software integration of protocols such as I2C, UART, SPI, USB, MIPI, I2S, CoaXPress etcExperience with high speed signaling over DP, MIPI, HDMI, PCIE, and USB SSExperience with prototyping or pre-silicon environments (FPGAs, simulation, or emulation)Experience with embedded DSP, CPU/MCU, and GPU architecturesExperience with input devices, health/medical devices, wearables, or devices with high levels of miniaturizationExperience with VR/AR systems and motion capture systems & techniques About Meta: Meta builds technologies that help people connect, find communities, and grow businesses. When Facebook launched in 2004, it changed the way people connect. Apps like Messenger, Instagram and WhatsApp further empowered billions around the world. Now, Meta is moving beyond 2D screens toward immersive experiences like augmented and virtual reality to help build the next evolution in social technology. People who choose to build their careers by building with us at Meta help shape a future that will take us beyond what digital connection makes possible today-beyond the constraints of screens, the limits of distance, and even the rules of physics. Meta is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state and local law. Meta participates in the E-Verify program in certain locations, as required by law. Please note that Meta may leverage artificial intelligence and machine learning technologies in connection with applications for employment. Meta is committed to providing reasonable accommodations for candidates with disabilities in our recruiting process. If you need any assistance or accommodations due to a disability, please let us know at [email protected].

DESCRIPTIONProject Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and under-served communities around the world. We are looking for an outstanding Applied Scientist who will help lay down the foundation of various science applications such as anomaly detection, advanced calibration methods, space engineering simulations, analytics, operational research, etc. The ideal candidate:* Thinks big and demonstrates bias for action while delivering short and long term results* Creative and capable of finding elegant solutions to ambiguous problems* Strong scientist/data-driven mindset with good intuition and strong backbone yet remains open-minded, respectful to others’ opinions, and naturally challenges their own beliefs* Enjoys working in a fast-paced, start-up-like environment* Eager to learn about new subjects and work outside their comfort zone* Strong team player who empowers and learns from othersKey job responsibilities* Owns the end-to-end development of solutions for concrete business problems: * Translate ambiguous problems into well defined mathematical problems * Propose relevant metrics, evaluation methods, and dashboards * Formulate hypothesis, create test environments, collect data, and present results * Prototype, test, and implement state-of-the-art algorithms* Collaborate closely with engineers to deploy performant, scalable, and maintainable applications in the cloud* Write internal science documentation and external publicationsExport Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the lifeIn this role as an Applied Scientist, you will design, implement, optimize, and operate systems critical to the uptime and performance of Kuiper ground terminals. Your contributions will have a direct impact on customers around the world.About the teamThe Kuiper Ground Systems Engineering team is responsible for the development, deployment, and long-term performance optimization of Kuiper satellite ground terminals located around the world (Gateway and Telemetry, Tracking, and Command (TT&C)). Ground terminals include full-motion parabolic antennas, radio frequency spectrum monitoring, terminal monitoring and control, and fault management systems. These software-driven distributed systems form the communications backbone for the Kuiper constellation and must provide the world-class reliability, uptime, and performance our customers expect from Amazon.This role will be part of the Software and Algorithms (SWALG) team, part of Ground Systems Engineering. SWALG is responsible for:* Design, development, deployment, and support of a tier 1 Monitoring and Remediation System (MARS) needed to maintain high availability of hundreds of ground terminals deployed around the world.* Ground systems integration/test (I&T) automation* Ground terminal configuration, provisioning, and acceptance automation* Systems analysis* Algorithm development (pointing/tracking/calibration/monitoring)* Software interface definition for supplier-provided hardware and development of software test automation* Definition of use cases/requirements needed to drive ground modem software developmentWe are open to hiring candidates to work out of one of the following locations:Redmond, WA, USABASIC QUALIFICATIONS- 3+ years of building models for top-tier business applications or strong academic records- PhD, or Master's degree and 4+ years of computer science, statistical modeling, machine learning, or related field experience- Excellent probability and statistics core- Experience in stochastic processes, Bayesian inference, and sampling methods (e.g. Monte Carlo Markov Chain)- Demonstrated proficiency in Python, C/C++, Java, Rust or related languagePREFERRED QUALIFICATIONS- Experience in calibration and anomaly detection- Experience in hardware projects- Good knowledge of neural methods- Experience in cloud application development- Strong algorithms and data structures skillsAmazon is committed to a diverse and inclusive workplace. Amazon is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status. For individuals with disabilities who would like to request an accommodation, please visit https://www.amazon.jobs/en/disability/us.Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $136,000/year in our lowest geographic market up to $222,200/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit https://www.aboutamazon.com/workplace/employee-benefits. Applicants should apply via our internal or external career site.

DESCRIPTIONProject Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and under-served communities around the world. We are looking for Software Development Engineer to help us build this service from the ground up.Key job responsibilities* Work with stakeholders across the Kuiper organization to define, design, implement, and optimize a state-of-the-art condition monitoring and remediation system for ground terminals.* Own the full software development lifecycle - including design, testing, deployment, mission integration, and operational support.* Work with applied scientists/engineers on our team to define, test, and implement machine-learned anomaly detection tools, predictive maintenance workflows, and automated remediation applications.This role will be part of the Software and Algorithms (SWALG) team, part of Ground Systems Engineering. SWALG is responsible for:* Design, development, deployment, and support of a tier 1 Monitoring and Remediation System (MARS) needed to maintain high availability of hundreds of ground terminals deployed around the world.* Ground systems integration/test (I&T) automation* Ground terminal configuration, provisioning, and acceptance automation* Systems analysis* Algorithm development (pointing/tracking/calibration/monitoring)* Software interface definition for supplier-provided hardware and development of software test automation* Definition of use cases/requirements needed to drive ground modem software developmentExport Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the lifeIn this role as a Software Development Engineer, you will design, implement, optimize, and operate systems critical to the uptime and performance of Kuiper ground terminals. Your contributions will have a direct impact on customers around the world.About the teamThe Kuiper Ground Systems Engineering team is responsible for the development, deployment, and long-term performance optimization of Kuiper satellite ground terminals located around the world (Gateway and Telemetry, Tracking, and Command (TT&C)). Ground terminals include full-motion parabolic antennas, radio frequency spectrum monitoring, terminal monitoring and control, and fault management systems. These software-driven distributed systems form the communications backbone for the Kuiper constellation and must provide the world-class reliability, uptime, and performance our customers expect from Amazon.We are open to hiring candidates to work out of one of the following locations:Redmond, WA, USABASIC QUALIFICATIONS- 3+ years of non-internship professional software development experience- 2+ years of non-internship design or architecture (design patterns, reliability and scaling) of new and existing systems experience- Experience programming with at least one software programming languagePREFERRED QUALIFICATIONS- 3+ years of full software development life cycle, including coding standards, code reviews, source control management, build processes, testing, and operations experience- Bachelor's degree in computer science or equivalentAmazon is committed to a diverse and inclusive workplace. Amazon is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status. For individuals with disabilities who would like to request an accommodation, please visit https://www.amazon.jobs/en/disability/us.Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $115,000/year in our lowest geographic market up to $223,600/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit https://www.aboutamazon.com/workplace/employee-benefits. Applicants should apply via our internal or external career site.

DESCRIPTIONProject Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.The Reliability Engineer will proactively drive the design for reliability for Kuiper hardware systems. This role has responsibility for developing and leading the reliability process, and staffing a team to deliver on program reliability objectives. This role will require interfacing closely with subsystem teams, provide technical input and guidance on designs, and support as needed with detailed analysis and test capabilities.The candidate will have experience in using Physics-of-Failure based approach to develop and implement both analytical and empirical approaches for product quality/reliability risk identification and assessment during product design, manufacturing, testing and deployment stages. The individual should be able to drive Project Kuiper’s requirements in carrying out stress driven risk analysis, including thermal, electrical and mechanical stresses in order to identify overstress and fatigue-related product weaknesses. This individual is capable of evaluating not only product design quality/reliability risks, but also has the skills and experiences in assessing electronics manufacture process related quality/reliability issues. At the component level, the individual will drive critical component identification and the associated vendor selection and qualification requirements. The candidate will be expected to use knowledge of process capability for PCBAs and electronic component production as well as system-level performance requirements to establish critical quality and reliability metrics. At the system level, the reliability team will develop system level reliability models and related reliability assessments and risk analyses for spacecraft optimization. The candidate will be expected to be familiar with system reliability engineering tools, such as reliability block diagram, Markov model, statistical modeling and data analytics.Responsibilities: - Assist with building a center of excellence for reliability analysis and test for Kuiper hardware design. - Develop system level reliability model and establish reliability allocations across vehicle subsystems to meet reliability targets. - Review, guide, support subsystem teams FMECAs, predictive modelling techniques, and test plans. - Establish test capabilities, and failure analysis as needed.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.We are open to hiring candidates to work out of one of the following locations:Redmond, WA, USABASIC QUALIFICATIONS- Advanced degree (MS / PhD) in Reliability Engineering, Physics or related fields, or equivalent experience.- 3+ years of experience with state of art PCBAs and electronics component packaging.- 3+ years of experience with failure analysis activities and root cause analysis.- 3+ years of experience with accelerated life testing and environmental stress screening (ALT, ESS, HALT/HASS).PREFERRED QUALIFICATIONS- Experienced with design for reliability in space environments.- Experience with full range of environmental stress testing, fatigue testing, vibration and shock testing, electrical stress testing, ESD testing.- Experienced with space hardware qualification (MIL Std 1540 / SMC-S-016).- Extensively experienced with off the shelf and custom component and board level reliability prediction and correlation with test data.- Experienced with custom component package development, qualification and deployment into the field.- Experience with failure analysis techniques: Electrical debug, Cross sectioning, dye and pry and microscopy.- Experienced with reliability assessment and test for long duration ‘moving mechanical assemblies’ in harsh (space) environments.- Experience with software and programing: Ansys Mechanical, Sherlock Automated Design Analysis and Python.- PhD in reliability engineering or relevant field.Amazon is committed to a diverse and inclusive workplace. Amazon is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status. For individuals with disabilities who would like to request an accommodation, please visit https://www.amazon.jobs/en/disability/us.Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $93,900/year in our lowest geographic market up to $185,000/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit https://www.aboutamazon.com/workplace/employee-benefits. This position will remain posted until filled. Applicants should apply via our internal or external career site.

The Augmented Reality AI Org at Meta is seeking a strong technical leader to join our team and work on the next generation of AI Experiences on smart devices. As a technical leader in the team, you will play a critical role in building the core AI tech powering the experiences on Meta's Smart Glasses, AR Glasses and Quest devices. We have the opportunity to build the next computing platform powered by the latest and greatest AI technologies. Last year we launched the AI Assistant on Ray-Ban Meta Smart Glasses, and we are working on making it a truly human-like Assistant that can see what you see and hear what you hear, helping users get things done in the most ubiquitous way. Engineering Manager, AI at Meta Responsibilities: Support and grow a team of AI and NLP expertsDevelop technical vision, long-term strategy and set direction for the team and the organizationDrive execution of developing models and systems that are crucial to the end user experiencePresent the team's work and plans in cross-company executive forumsCommunicate, collaborate, and build relationships with clients and peer teams to facilitate cross-functional projects Minimum Qualifications:Experience and track of record in landing large product impacts in a fast-paced environment 5+ years of hands on experience in large language model, NLP, and/or multimodal modeling, in the setting of both research and engineering development2+ years of hands on supporting and leading teams of software engineers and research scientistsExperience in developing large-scale AI servicesExperience with cross functional collaboration with product and platform teams, as well as non-engineering functionsDemonstrated experience recruiting, building, structuring, leading technical organizations, including performance management Preferred Qualifications:PhD in deep learning, artificial intelligence, and/or related technical fieldExperience and knowledge of ML frameworks like PyTorch, TensorFlow, etc.Experience and knowledge of training and finetuning LLMsExperience and knowledge of multi-modal modeling and computer vision About Meta: Meta builds technologies that help people connect, find communities, and grow businesses. When Facebook launched in 2004, it changed the way people connect. Apps like Messenger, Instagram and WhatsApp further empowered billions around the world. Now, Meta is moving beyond 2D screens toward immersive experiences like augmented and virtual reality to help build the next evolution in social technology. People who choose to build their careers by building with us at Meta help shape a future that will take us beyond what digital connection makes possible today-beyond the constraints of screens, the limits of distance, and even the rules of physics. Meta is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state and local law. Meta participates in the E-Verify program in certain locations, as required by law. Please note that Meta may leverage artificial intelligence and machine learning technologies in connection with applications for employment. Meta is committed to providing reasonable accommodations for candidates with disabilities in our recruiting process. If you need any assistance or accommodations due to a disability, please let us know at [email protected].

DESCRIPTIONProject Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world. Key job responsibilitiesAt the component level, the individual will drive critical component identification and the associated vendor selection and qualification requirements. The candidate will be expected to use knowledge of process capability for PCBAs and electronic component production as well as system-level performance requirements to establish critical quality and reliability metrics. At the system level, the reliability team will develop system level reliability models and related reliability assessments and risk analyses for spacecraft optimization. The candidate will be expected to be familiar with system reliability engineering tools, such as reliability block diagram, Markov model, statistical modeling and data analytics.The candidate will have experience in using Physics-of-Failure based approach to develop and implement both analytical and empirical approaches for product quality/reliability risk identification and assessment during product design, manufacturing, testing and deployment stages. The individual should be able to drive Project Kuiper’s requirements in carrying out stress driven risk analysis, including thermal, electrical and mechanical stresses in order to identify overstress and fatigue-related product weaknesses. This individual is capable of evaluating not only product design quality/reliability risks, but also has the skills and experiences in assessing electronics manufacture process related quality/reliability issues.- Build a center of excellence for reliability analysis and test for Kuiper hardware design.- Staff and lead a team of reliability subject matter experts in design, analysis and test.- Develop system level reliability model and establish reliability allocations across vehicle subsystems to meet reliability targets.- Review, guide, support subsystem teams FMECAs, predictive modelling techniques, and test plans.- Establish test capabilities, and failure analysis as needed.Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the lifeThe Sr. Manager - Reliability Engineering will proactively drive the design for reliability for Kuiper hardware systems. This role has responsibility for developing and leading the reliability process, and staffing a team to deliver on program reliability objectives. This role will require interfacing closely with subsystem teams, provide technical input and guidance on designs, and support as needed with detailed analysis and test capabilities.We are open to hiring candidates to work out of one of the following locations:Redmond, WA, USABASIC QUALIFICATIONS- Bachelor's degree in Reliability Engineering, Physics or related fields, or equivalent experience.- 7+ years of experience building and leading teams.- 7+ years of experience with state of art PCBAs and electronics component packaging.- 7+ years of experience with failure analysis activities and root cause analysis.- 7+ years of experience with accelerated life testing (ALT, ESS, HALT/HASS).PREFERRED QUALIFICATIONS- Advanced degree (MS / PhD) in Reliability Engineering, Physics or related fields, or equivalent experience.- Experienced with design for reliability in space environments.- Experience with full range of environmental stress testing, fatigue testing, vibration and shock testing, electrical stress testing, ESD testing.- Experienced with space hardware qualification (MIL Std 1540 / SMC-S-016).- Extensively experienced with off the shelf and custom component and board level reliability prediction and correlation with test data.- Experienced with custom component package development, qualification and deployment into the field.- Experience with failure analysis techniques: Electrical debug, Cross sectioning, dye and pry and microscopy.- Experienced with reliability assessment and test for long duration ‘moving mechanical assemblies’ in harsh (space) environments.- Experience with software and programing: Ansys Mechanical, Sherlock Automated Design Analysis and Python.Amazon is committed to a diverse and inclusive workplace. Amazon is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status. For individuals with disabilities who would like to request an accommodation, please visit https://www.amazon.jobs/en/disability/us.Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $143,800/year in our lowest geographic market up to $279,600/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit https://www.aboutamazon.com/workplace/employee-benefits. This position will remain posted until filled. Applicants should apply via our internal or external career site.

If you are interested in building the fundamental infrastructure powering Mixed Reality scenarios for both VR devices & AR Glasses - then we have the right opportunity for you. Some of the devices we have shipped in the past include: Oculus Quest, Quest 2 , Quest Pro, Quest3. Some of the devices we are currently working on include: multiple next generation VR and AR products.We are a mix of embedded software engineers, firmware enthusiasts, systems generalists and full stack engineers working in a rhythm to deliver awesome camera experiences on our consumer electronics devices. Our team works across many code bases including but not limited to AOSP, Firmware, Linux Kernel, using mostly C++.We are looking for a seasoned Engineering Manager to help us scale our team and be a part of an exciting journey to shape our AR/VR products. This is a highly visible role and we are looking for a leader who can bring the right execution & operational rigor while helping scale the team further and set the strategy going forward. The ideal candidate has experience designing and developing critical and complex systems software in addition to strong communication, organizational, cross-functional and people management skills. Software Engineering Manager - XR Cameras & Sensors Responsibilities: Build a high performance team developing the abstractions, primitives, and frameworks that enable AR and VR on a Linux/AOSP based foundationHire, onboard and retain engineering talent, support career advancements and skill developmentSet clear expectations and create a positive work environment based on individual accountability and teamworkSet ambitious yet attainable goals, and motivate the team to achieve themDrive efficient and effective cross functional collaboration with the broader teamsPlan and coordinate major initiatives such as phased releases of the team's software that align with product roadmaps and organizational prioritiesInfluence the engineering culture of the team and advocate for higher product quality and engineering efficiency Minimum Qualifications:7+ years experience developing, debugging and shipping C++ based system software products or Java based Android internalsEffective communication skills3+ years experience managing and growing software engineersExperience with software development tools and processes such as source control, bug tracking, design documentation, Agile methodology etc.Experience working collaboratively with cross-functional teams in a large organizationBachelor's degree in Computer Science, Computer Engineering, relevant technical field, or equivalent practical experience.Experience developing, debugging, and shipping software products on large code bases that span platforms and tools. Preferred Qualifications:Experience in technically leading and/or managing teams delivering Operating Systems and/or middleware for high performance consumer electronics About Meta: Meta builds technologies that help people connect, find communities, and grow businesses. When Facebook launched in 2004, it changed the way people connect. Apps like Messenger, Instagram and WhatsApp further empowered billions around the world. Now, Meta is moving beyond 2D screens toward immersive experiences like augmented and virtual reality to help build the next evolution in social technology. People who choose to build their careers by building with us at Meta help shape a future that will take us beyond what digital connection makes possible today-beyond the constraints of screens, the limits of distance, and even the rules of physics. Meta is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state and local law. Meta participates in the E-Verify program in certain locations, as required by law. Please note that Meta may leverage artificial intelligence and machine learning technologies in connection with applications for employment. Meta is committed to providing reasonable accommodations for candidates with disabilities in our recruiting process. If you need any assistance or accommodations due to a disability, please let us know at [email protected].

Title: Technical Program Manager IVLocation: Redmond, WADuration: 9 monthsProject OverviewWe are currently seeking a TPM on the Optics and Display Research team who will work with a world-class group of researchers and engineers. This is a full-time position and requires a degree in optics/display, optical/electrical engineering, systems HW engineering, physics, or similar. Successful candidates must be familiar with imaging system hardware and software and relatively versed in VR or AR display technology trends. We're also looking for a candidate who is resilient in pursuing solutions to hard and complex problems.You will establish requirements with internal and external customers, manage program schedules, identify risks and associated mitigation plans, and clearly communicate to program stakeholders. We look for technical program managers who have a strong technical foundation and are natural motivators, cross-functional relationship builders, and champions for driving the right level of process to ensure smooth and predictable program execution in a fast-paced innovative environment.RESPONSIBILITIES• Work with research, engineering, and business teams to define roadmaps, program milestones and deliverables.• Develop and maintain an overall program schedule based on feedback from multiple work streams such as requirements, technical challenges, available resources, and business needs.• Identify resources needed and work closely with the team leads to maintain full visibility of multiple projects, ensuring resource gaps are addressed efficiently.• Proactively identify technical, legal, procedural, logistical, and communication issues and drive creative solutions to fix them and manage both technical and programmatic risks.• Work cross-functionally to develop best practices and research development processes in a quickly-changing and dynamic environment.• Engage with cross-functional and external teams to identify constraints, dependencies, and risks/issues.• Coordinate communication between internal and external teams and partners.• Report program status, issues, challenges and help needed with all stakeholders.• Building teams, development processes, best practices, and supporting tools to support a growing organization.• Flexibility across time zones to take calls.MINIMUM QUALIFICATIONS• BS in Display, Systems Engineering, Imaging Science, Electronics, Optics, or Physics• 10+ years of experience as a Technical Program Manager.• Experience with driving programs in a research environment.• Project management, leadership, dependency management and cross-group technical collaboration experience.• Experience managing external technical engagements.• Knowledge of display and/or optics development including manufacturing processes.• Organizational experience, including managing cross-team budgets and headcount.• Systems architecture application experience in technical domains.• Ability to travel up to 25% of the time, international travel possiblePREFERRED QUALIFICATIONS• Graduate degree in an engineering or scientific field related to display/optics/imaging systems.• Experience in project management on optics and display development especially in the consumer market.• Multi-team/geographically dispersed team management experience.• Track record of transitioning research or emerging technologies into consumer products.• Experience working with a cross-disciplinary team of researchers, software engineers and hardware engineers.Compensation:The estimated pay range for this position is USD $ 65.00 - 85.00 Hr and is a Non-Exempt role.Exact compensation and offers of employment are dependent on circumstances of each case and will be determined based on job-related knowledge, skills, experience, licenses or certifications, and location.Benefits:We offer comprehensive benefit options which vary depending on role, location, and employment type.The Talent Acquisition Partner can share more details about compensation or benefits for the specific role during the hiring process.